Weft Tensile Mechanical Behavior of 2.5D Woven Composite Notched Structures: Modification of Whitney–Nuismer Criterion, Simulation, and Experiment
- 19 August 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 47 (3) , 2469-2485
Abstract
2.5D woven composites (2.5DWC) are regarded as one of the most promising materials for future aerospace applications, but with the inevitable need for drilling holes during service, quickly predicting their strength has become a challenge for engineering design. In this work, we focus on the degree to which the yarn at the hole edge is cut. The Whitney–Nuismer (W‐N) criterion, which is only applicable to notched structures of laminated composites, is modified to apply to the rapid prediction of the strength of 2.5DWC notched structures (2.5DWC‐NS) Further, progressive damage simulations and experiments are also performed for 2.5DWC‐NS with different notch sizes and compared with the predicted values of the modified criterion. The results show that the deviation between the strength predicted by the modified criterion and the experimental data is only 15.87%, which is within the acceptable engineering deviation. Additionally, numerical simulations indicate that the stress concentration factor increases and the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns at the hole edge being cut increase. Through numerical simulations, it is found that the stress concentration factor increases, whereas the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns being cut at the hole edge increase. The modified criterion provides a convenient tool for the rapid design of 2.5DWC structures with significant engineering implications.Keywords
Funding Information
- China Postdoctoral Science Foundation (2024M764270)
This publication has 27 references indexed in Scilit:
- Influence of different thickness-to-radius on axial compression damage mechanism of carbon/epoxy 2.5D woven composite cylindrical shellsComposites Communications, 2025
- Tensile properties and failure of hybrid fiber reinforced polymer composite laminate with different fiber types, hybrid ratios, and stacking sequencesPolymer Composites, 2025
- Tribological behavior and compressive creep of PTFE/poly‐p‐hydroxybenzoate/fibrous wollastonite composites: The influence of hot‐pressing pressurePolymer Composites, 2025
- Effect of multi‐angle lamination on mechanical properties and damages behavior of carbon fiber reinforced resin matrix compositesPolymer Composites, 2024
- Experimental characterization and numerical analysis of 3D woven preforms torsional deformationPolymer Composites, 2024
- Excellent flame-retardant polycarbonate composites with improved notched impact toughness via introducing imine-functionalized polysiloxaneComposites Part A: Applied Science and Manufacturing, 2024
- Effect of warp yarn paths on the symmetrical cyclic bending fatigue properties of 3D woven compositesPolymer Composites, 2024
- Highly lubricating and wear‐resistant Ti3C2Tx@SiO2/PI composites based on the action of transfer film at the friction surfacePolymer Composites, 2024
- 1D higher-order theories for quasi-static progressive failure analysis of composites based on a full 3D Hashin orthotropic damage modelComposites Part B: Engineering, 2023
- Experimental characterization of compression failure mechanism initiation and growth in notched carbon fiber reinforced composite specimensComposites Part A: Applied Science and Manufacturing, 2023