Daša Krapež Tomec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daša Krapež Tomec has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Mirko Kariž
University of Ljubljana
9 shared publications - Jure Žigon
University of Ljubljana
5 shared publications - Manja Kitek Kuzman
University of Ljubljana
4 shared publications - Aleš Straže
Department of Wood Science and Technology, Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
2 shared publications - Angela Balzano
Department of Wood Science and Technology, Biotechnical Faculty, University of Ljubljana, 1000 Ljubljana, Slovenia
2 shared publications - Maks Merela
Department of Wood Science and Technology, Biotechnical Faculty, University of Ljubljana, 1000 Ljubljana, Slovenia
2 shared publications
Latest Publications
- Open Access
From X-Ray Tomography to 3D Printing: A Methodological Framework for Wood Microstructure Visualization
Advances in imaging and fabrication technologies offer new opportunities to develop tools that support the visualization and understanding of complex biological materials. This contribution presents a comprehensive methodological framework for generating anatomically representative, species-specific 3D models of wood microstructure, intended to enhance student comprehension in wood science and related fields. The workflow integrates micro-X-ray computed tomography (micro-CT) scanning, image segmentation, STL model preparation, and additive manufacturing. Using micro-CT, we captured high-resolution, non-destructive 3D datasets of four wood species—European beech (Fagus sylvatica), oak (Quercus robur L.), Norway spruce (Picea abies), and Scots pine (Pinus sylvestris). The resulting volumetric data were processed with dedicated software to isolate and reconstruct key anatomical features, which were subsequently converted into printable STL models. These models were fabricated at a 1:400 scale using filaments composed of 40% wood particles and 60% biodegradable polylactic acid (PLA), underscoring the relevance of sustainable materials in educational tool development. The primary aim of this work is to document and justify each stage of the technological process, thereby providing a replicable pathway for producing detailed, pedagogically useful representations of wood microstructure. The resulting models are publicly available on the Sketchfab platform as part of the “3D Wood Micro Structure Collection.”
Open AccessFrom X-Ray Tomography to 3D Printing: A Methodological Framework for Wood Microstructure Visualization
Advances in imaging and fabrication technologies offer new opportunities to develop tools that support the visualization and understanding of complex biological materials. This contribution presents a comprehensive methodological framework for generating anatomically representative, species-specific 3D models of wood microstructure, intended to enhance student comprehension in wood science and related fields. The workflow integrates micro-X-ray computed tomography (micro-CT) scanning, image segmentation, STL model preparation, and additive manufacturing. Using micro-CT, we captured high-resolution, non-destructive 3D datasets of four wood species—European beech (Fagus sylvatica), oak (Quercus robur L.), Norway spruce (Picea abies), and Scots pine (Pinus sylvestris). The resulting volumetric data were processed with dedicated software to isolate and reconstruct key anatomical features, which were subsequently converted into printable STL models. These models were fabricated at a 1:400 scale using filaments composed of 40% wood particles and 60% biodegradable polylactic acid (PLA), underscoring the relevance of sustainable materials in educational tool development. The primary aim of this work is to document and justify each stage of the technological process, thereby providing a replicable pathway for producing detailed, pedagogically useful representations of wood microstructure. The resulting models are publicly available on the Sketchfab platform as part of the “3D Wood Micro Structure Collection.”
- Open Access
- 11 July 2025
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 21 (5) , 1-9
Thermally modified beech wood in polylactic acid filaments for 3D printing: morphology of printed parts and dynamic mechanical analysis of injection-moulded specimens
- 11 July 2025
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 21 (5) , 1-9
Open AccessThermally modified beech wood in polylactic acid filaments for 3D printing: morphology of printed parts and dynamic mechanical analysis of injection-moulded specimens
- Open Access
- 15 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2046
Effect of Filament Material and Printing Temperature on 3D Printing Extrusion Force
In this study, a modified 3D printer hotend equipped with a load cell, attached to the feeding system, was used to evaluate the effects of filament material composition and printing parameters on the extrusion force required. Four different materials (commercial PLA, pure PLA, wood-PLA with different ratios of wood particles, and wood-PLA with different ratios of thermally modified wood particles) were used for 3D printing, and the feeding resistance was measured. The filament feeder was connected to the extruder hotend via a load cell, which measured the forces required to push the filament through the extruder and the nozzle. Three printing nozzle temperatures of 200, 210, and 220 °C were used. The results show that the printing temperature and the material influence the required extrusion forces, which varied between 1 and 8 N, but the variation was high. With proper optimization and integration into the printer firmware, this setup could also be used to detect nozzle clogging during printing, modify printing parameters during the process, and prevent the uneven extrusion of composite filaments.
- 15 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2046
Open AccessEffect of Filament Material and Printing Temperature on 3D Printing Extrusion Force
In this study, a modified 3D printer hotend equipped with a load cell, attached to the feeding system, was used to evaluate the effects of filament material composition and printing parameters on the extrusion force required. Four different materials (commercial PLA, pure PLA, wood-PLA with different ratios of wood particles, and wood-PLA with different ratios of thermally modified wood particles) were used for 3D printing, and the feeding resistance was measured. The filament feeder was connected to the extruder hotend via a load cell, which measured the forces required to push the filament through the extruder and the nozzle. Three printing nozzle temperatures of 200, 210, and 220 °C were used. The results show that the printing temperature and the material influence the required extrusion forces, which varied between 1 and 8 N, but the variation was high. With proper optimization and integration into the printer firmware, this setup could also be used to detect nozzle clogging during printing, modify printing parameters during the process, and prevent the uneven extrusion of composite filaments.
- Open Access
The Effects of Microcrystalline Cellulose Addition on the Properties of Wood–PLA Filaments for 3D Printing
This paper describes the use of microcrystalline cellulose (MCC) as an additive in wood-polylactic acid (PLA) filaments suitable for 3D printing. Filaments prepared with PLA, thermally modified (TM) wood, and three different MCC loadings (1, 3, and 5 wt%) by two-step melt blending in the extruder were characterized with respect to their rheological, thermal, and mechanical response. The analyses demonstrate that a low MCC content (1%) improves the mobility of the polymer chains and contributes to a higher elasticity of the matrix chain, a higher crystallinity, a lower glass transition temperature (by 1.66 °C), and a lower melting temperature (by 1.31 °C) and leads to a higher tensile strength (1.2%) and a higher modulus of elasticity (12.1%). Higher MCC loading hinders the mobility of the polymer matrix and leads to a rearrangement of the crystal lattice structure, resulting in a decrease in crystallinity. Scanning electron micrographs show that the cellulose is well distributed and dispersed in the PLA matrix, with some agglomeration occurring at higher MCC levels. The main objective of this study was to develop and evaluate a filament containing an optimal amount of MCC to improve compatibility between wood and PLA, optimize melt processability, and improve mechanical properties. It can be concluded that a 1% addition of MCC favorably changes the properties of the wood–PLA filaments, while a higher MCC content does not have this effect.
Open AccessThe Effects of Microcrystalline Cellulose Addition on the Properties of Wood–PLA Filaments for 3D Printing
This paper describes the use of microcrystalline cellulose (MCC) as an additive in wood-polylactic acid (PLA) filaments suitable for 3D printing. Filaments prepared with PLA, thermally modified (TM) wood, and three different MCC loadings (1, 3, and 5 wt%) by two-step melt blending in the extruder were characterized with respect to their rheological, thermal, and mechanical response. The analyses demonstrate that a low MCC content (1%) improves the mobility of the polymer chains and contributes to a higher elasticity of the matrix chain, a higher crystallinity, a lower glass transition temperature (by 1.66 °C), and a lower melting temperature (by 1.31 °C) and leads to a higher tensile strength (1.2%) and a higher modulus of elasticity (12.1%). Higher MCC loading hinders the mobility of the polymer matrix and leads to a rearrangement of the crystal lattice structure, resulting in a decrease in crystallinity. Scanning electron micrographs show that the cellulose is well distributed and dispersed in the PLA matrix, with some agglomeration occurring at higher MCC levels. The main objective of this study was to develop and evaluate a filament containing an optimal amount of MCC to improve compatibility between wood and PLA, optimize melt processability, and improve mechanical properties. It can be concluded that a 1% addition of MCC favorably changes the properties of the wood–PLA filaments, while a higher MCC content does not have this effect.
- Open Access
- 2 March 2024
- Published by University of Zagreb, Faculty of Forestry and Wood Technology in Drvna industrija
- Vol. 75 (1) , 49-58
Environmental Assessment/Evaluation of 3D Printing and 3D Printing with Wood-PLA Composites - Case Study
In recent years, additive manufacturing has become a regular process in various industries, and consequently there is an increasing need to evaluate the environmental aspects of this technology and its associated materials. In this paper, comparative cradle-to-grave life cycle assessments between a conventional product and a 3D-printed alternative made of polylactic acid (PLA) and PLA-wood material were investigated based on the standard ISO 14044:2006. The environmental impact of each product was quantified for 18 categories. The goal of life cycle assessment (LCA) was to determine whether the use of 3D printed PLA/PLA-wood products can be a sustainable alternative to traditional metal products. The paper presents a case study in which a comparative LCA was conducted. The results show that a metal part manufactured using conventional subtractive processes (milling, drilling, welding, etc.) has a higher environmental impact compared to 3D-printed alternatives made from renewable materials. However, there are many sub-issues that need to be adequately addressed.
- 2 March 2024
- Published by University of Zagreb, Faculty of Forestry and Wood Technology in Drvna industrija
- Vol. 75 (1) , 49-58
Open AccessEnvironmental Assessment/Evaluation of 3D Printing and 3D Printing with Wood-PLA Composites - Case Study
In recent years, additive manufacturing has become a regular process in various industries, and consequently there is an increasing need to evaluate the environmental aspects of this technology and its associated materials. In this paper, comparative cradle-to-grave life cycle assessments between a conventional product and a 3D-printed alternative made of polylactic acid (PLA) and PLA-wood material were investigated based on the standard ISO 14044:2006. The environmental impact of each product was quantified for 18 categories. The goal of life cycle assessment (LCA) was to determine whether the use of 3D printed PLA/PLA-wood products can be a sustainable alternative to traditional metal products. The paper presents a case study in which a comparative LCA was conducted. The results show that a metal part manufactured using conventional subtractive processes (milling, drilling, welding, etc.) has a higher environmental impact compared to 3D-printed alternatives made from renewable materials. However, there are many sub-issues that need to be adequately addressed.
- Open Access
- 15 February 2024
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 19 (6) , 1251-1265
Effect of thermal modification of wood on the rheology, mechanical properties and dimensional stability of wood composite filaments and 3D-printed parts
- 15 February 2024
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 19 (6) , 1251-1265
Open AccessEffect of thermal modification of wood on the rheology, mechanical properties and dimensional stability of wood composite filaments and 3D-printed parts
- Open Access
- 9 December 2023
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 82 (2) , 403-416
Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts
This paper describes the development and characterisation of wood-filled polylactic acid (PLA) composite filaments for application in fused filament fabrication three-dimensional (3D) printing. Four different wood-polymer composite filaments for 3D printing were prepared, and specimens were 3D-printed with the obtained materials. The composite filaments consisted of wood particles (10% or 20% mass ratio) and a PLA polymer matrix. Wood particles were prepared by grinding and sieving non-modified beech wood and thermally modified (TM) (at 200 °C) beech wood. Thermal modification of wood affected particle preparation and smaller particles with lower aspect ratios were obtained. Filaments with TM wood particles were extruded better than with non-modified wood particles, with lower surface roughness and lower porosity. With a higher wood ratio, the surface roughness and porosity of the filament increased. Non-homogenous filaments also affected extrusion in 3D printing and reduced the properties of 3D-printed parts. Parts 3D-printed from filaments with TM particles had better tensile strength than from filaments with non-modified particles, but were lower than from pure PLA filaments. The tensile strength of the injection-moulded specimens was 18–69% higher than that of the 3D-printed specimens, depending on the filament composition. The results indicate some positive effects of thermal modification of wood particles on the properties of filaments and 3D-printed parts. Nevertheless, further optimisation of particle preparation and extrusion parameters is needed to obtain quality filaments with this size of wood particles.
- 9 December 2023
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 82 (2) , 403-416
Open AccessEffect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts
This paper describes the development and characterisation of wood-filled polylactic acid (PLA) composite filaments for application in fused filament fabrication three-dimensional (3D) printing. Four different wood-polymer composite filaments for 3D printing were prepared, and specimens were 3D-printed with the obtained materials. The composite filaments consisted of wood particles (10% or 20% mass ratio) and a PLA polymer matrix. Wood particles were prepared by grinding and sieving non-modified beech wood and thermally modified (TM) (at 200 °C) beech wood. Thermal modification of wood affected particle preparation and smaller particles with lower aspect ratios were obtained. Filaments with TM wood particles were extruded better than with non-modified wood particles, with lower surface roughness and lower porosity. With a higher wood ratio, the surface roughness and porosity of the filament increased. Non-homogenous filaments also affected extrusion in 3D printing and reduced the properties of 3D-printed parts. Parts 3D-printed from filaments with TM particles had better tensile strength than from filaments with non-modified particles, but were lower than from pure PLA filaments. The tensile strength of the injection-moulded specimens was 18–69% higher than that of the 3D-printed specimens, depending on the filament composition. The results indicate some positive effects of thermal modification of wood particles on the properties of filaments and 3D-printed parts. Nevertheless, further optimisation of particle preparation and extrusion parameters is needed to obtain quality filaments with this size of wood particles.
- Open Access
Use of Wood in Additive Manufacturing: Review and Future Prospects
Polymers filled with natural-based fillers have shown growing demand/interest in recent years, including in additive manufacturing. Like most natural fillers in 3D printing, wood particles serve mainly as a filler that lowers the cost of the printing material due to their low price. However, could wood be used as a main ingredient to affect/improve the properties of 3D-printed parts? Several advantages, such as its reinforcing ability, biodegradability, availability as waste material from other industries, ability to be used in different forms or only in partial components, recycling options or even the use of its undesirable hydromorph-induced dimensional instability for 4D printing, indicate the importance of exploring its use in 3D printing. A review of publications on 3D printing with wood biomass and technologies involving the use of wood particles and components was conducted to identify the possibilities of using wood in additive technologies and their potential.
Open AccessUse of Wood in Additive Manufacturing: Review and Future Prospects
Polymers filled with natural-based fillers have shown growing demand/interest in recent years, including in additive manufacturing. Like most natural fillers in 3D printing, wood particles serve mainly as a filler that lowers the cost of the printing material due to their low price. However, could wood be used as a main ingredient to affect/improve the properties of 3D-printed parts? Several advantages, such as its reinforcing ability, biodegradability, availability as waste material from other industries, ability to be used in different forms or only in partial components, recycling options or even the use of its undesirable hydromorph-induced dimensional instability for 4D printing, indicate the importance of exploring its use in 3D printing. A review of publications on 3D printing with wood biomass and technologies involving the use of wood particles and components was conducted to identify the possibilities of using wood in additive technologies and their potential.
- Open Access
- 27 September 2021
- Published by University of Ljubljana in Les/Wood
- Vol. 70 (2) , 53-69
Use of wood-plastic composites in 4D printing technology
Three-dimensional (3D) printing with wood-plastic composites is already well known, and the use of wood in four-dimensional (4D) printing is being increasingly explored. 4D printing is an evolving area of additive technologies where, with the appropriate design of 3D printing and use of appropriate materials, we can create products that change shape and form dynamic structures when triggered externally. In 4D printing, the hygroscopicity of wood – usually considered a disadvantage – can be used as a positive property to design products that change their shape according to climatic conditions, especially humidity. In this research, we used the FDM (fused deposition modelling) technology of 3D printing PLA (polylactic acid) and wood-plastic composites (wood-PLA) to produce specimens with different material proportions, whose response to changing climatic conditions we monitored. To monitor the change in shape, or curvature, we fabricated composite test specimens using the bimetal principle (actuators), in which we used PLA for the passive layer and wood-PLA for the active layer in different thickness ratios and exposed them to laboratory and external conditions. The results showed that the wood content of the wood-plastic composites leads to dimensional changes in a changing climate, resulting in changes in the shape of the designed actuators. The change in shape depends on the thickness ratio of the layers in the two-layer actuator, the sorption of water vapor, and the wood content in the wood-plastic composite used.
- 27 September 2021
- Published by University of Ljubljana in Les/Wood
- Vol. 70 (2) , 53-69
Open AccessUse of wood-plastic composites in 4D printing technology
Three-dimensional (3D) printing with wood-plastic composites is already well known, and the use of wood in four-dimensional (4D) printing is being increasingly explored. 4D printing is an evolving area of additive technologies where, with the appropriate design of 3D printing and use of appropriate materials, we can create products that change shape and form dynamic structures when triggered externally. In 4D printing, the hygroscopicity of wood – usually considered a disadvantage – can be used as a positive property to design products that change their shape according to climatic conditions, especially humidity. In this research, we used the FDM (fused deposition modelling) technology of 3D printing PLA (polylactic acid) and wood-plastic composites (wood-PLA) to produce specimens with different material proportions, whose response to changing climatic conditions we monitored. To monitor the change in shape, or curvature, we fabricated composite test specimens using the bimetal principle (actuators), in which we used PLA for the passive layer and wood-PLA for the active layer in different thickness ratios and exposed them to laboratory and external conditions. The results showed that the wood content of the wood-plastic composites leads to dimensional changes in a changing climate, resulting in changes in the shape of the designed actuators. The change in shape depends on the thickness ratio of the layers in the two-layer actuator, the sorption of water vapor, and the wood content in the wood-plastic composite used.
- Open Access
Hygromorphic Response Dynamics of 3D-Printed Wood-PLA Composite Bilayer Actuators
The use of wood particles in wood-plastic composites (WPC) is well known and similar use could occur in materials for fused deposition modeling (FDM) 3D printing. Wood particles could be one of the possible solutions in the search for natural-based materials to minimize the use of synthetic-origin materials in additive manufacturing. Wood particles for 3D printing filaments can be made from wood waste and could serve as a cheap filler or as a value-added reinforcing component, depending on their properties and incorporation. The disadvantages of wood (dimensional changes due to water adsorption and desorption) could be used as functions when dimensional change is desirable, such as in shape-changing 4D printing materials. In this research, FDM printing materials made of polylactic acid (PLA), with different amounts of wood particles, were used to design moisture-induced shape-changing bilayer actuators, which could serve as a principle for active façade or ventilation valves. The initial research shows that the wood content in the WPC causes dimensional changes and thus shape changes of the designed actuators under changing climates. The shape change depends on the ratio of the materials in the two-layered actuator and the wood content in the wood-PLA composite used, and thus on sorption. The rate of the shape change behaves in the same way: the higher the wood content, the greater the change observed. The dynamics of the hygromorphism of bimaterial composites is greater with a small amount of added hygromechanically active material.
Open AccessHygromorphic Response Dynamics of 3D-Printed Wood-PLA Composite Bilayer Actuators
The use of wood particles in wood-plastic composites (WPC) is well known and similar use could occur in materials for fused deposition modeling (FDM) 3D printing. Wood particles could be one of the possible solutions in the search for natural-based materials to minimize the use of synthetic-origin materials in additive manufacturing. Wood particles for 3D printing filaments can be made from wood waste and could serve as a cheap filler or as a value-added reinforcing component, depending on their properties and incorporation. The disadvantages of wood (dimensional changes due to water adsorption and desorption) could be used as functions when dimensional change is desirable, such as in shape-changing 4D printing materials. In this research, FDM printing materials made of polylactic acid (PLA), with different amounts of wood particles, were used to design moisture-induced shape-changing bilayer actuators, which could serve as a principle for active façade or ventilation valves. The initial research shows that the wood content in the WPC causes dimensional changes and thus shape changes of the designed actuators under changing climates. The shape change depends on the ratio of the materials in the two-layered actuator and the wood content in the wood-PLA composite used, and thus on sorption. The rate of the shape change behaves in the same way: the higher the wood content, the greater the change observed. The dynamics of the hygromorphism of bimaterial composites is greater with a small amount of added hygromechanically active material.