Use of wood-plastic composites in 4D printing technology
Authors:
- Daša Krapež TomecDaša Krapež Tomec
- Test TestTTTest Test
- Aleš StražeAleš Straže
- Matevž KokotMKMatevž Kokot
- Manja Kitek KuzmanMKManja Kitek Kuzman
- Mirko KarižMirko Kariž
Open Access
- 27 September 2021
- journal article
- research article
- Published by University of Ljubljana in Les/Wood
- Vol. 70 (2) , 53-69
Abstract
Three-dimensional (3D) printing with wood-plastic composites is already well known, and the use of wood in four-dimensional (4D) printing is being increasingly explored. 4D printing is an evolving area of additive technologies where, with the appropriate design of 3D printing and use of appropriate materials, we can create products that change shape and form dynamic structures when triggered externally. In 4D printing, the hygroscopicity of wood – usually considered a disadvantage – can be used as a positive property to design products that change their shape according to climatic conditions, especially humidity. In this research, we used the FDM (fused deposition modelling) technology of 3D printing PLA (polylactic acid) and wood-plastic composites (wood-PLA) to produce specimens with different material proportions, whose response to changing climatic conditions we monitored. To monitor the change in shape, or curvature, we fabricated composite test specimens using the bimetal principle (actuators), in which we used PLA for the passive layer and wood-PLA for the active layer in different thickness ratios and exposed them to laboratory and external conditions. The results showed that the wood content of the wood-plastic composites leads to dimensional changes in a changing climate, resulting in changes in the shape of the designed actuators. The change in shape depends on the thickness ratio of the layers in the two-layer actuator, the sorption of water vapor, and the wood content in the wood-plastic composite used.Keywords
This publication has 25 references indexed in Scilit:
- Hygromorph BioComposites: Effect of fibre content and interfacial strength on the actuation performancesIndustrial Crops and Products, 2017
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionalityMaterials & Design, 2016
- Reversible shape‐shifting in polymeric materialsJournal of Polymer Science Part B: Polymer Physics, 2016
- 3D-Printed Wood: Programming Hygroscopic Material Transformations3D Printing and Additive Manufacturing, 2015
- Moisture-induced self-shaping flax-reinforced polypropylene biocomposite actuatorIndustrial Crops and Products, 2015
- Bio-Inspired Wooden Actuators for Large Scale ApplicationsPLOS ONE, 2015
- Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsivenessComputer-Aided Design, 2015
- Self-shaping composites with programmable bioinspired microstructuresNature Communications, 2013
- Biocomposites reinforced with natural fibers: 2000–2010Progress in Polymer Science, 2012
- The Effects of Temperature and Moisture Exposure on the Properties of Wood-Fiber Thermoplastic CompositesJournal of Thermoplastic Composite Materials, 1997