FTFrancesco Tesolin

Francesco Tesolin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francesco Tesolin has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Wideband Digitally Assisted Frequency Tripler With Adaptively Optimized Output Power in 55-nm SiGe BiCMOS

    by Daniele Lodi Rizzini, Francesco Tesolin, Michele Rossoni, Riccardo Moleri, Filippo Osio, Andrea Mazzanti, Andrea L. Lacaita, Simone M. Dartizio, Salvatore Levantino

    This article presents a 28–38-GHz frequency tripler implemented in 55-nm SiGe BiCMOS technology with a novel on-chip background calibration technique. This technique continuously optimizes the circuit performance by maximizing output power and improving fundamental harmonic rejection. The proposed tripler achieves wideband operation and robust performance across varying operating conditions and input-power levels. The calibrated tripler demonstrates more than 40 dB of fundamental harmonic rejection and a 10.2-GHz (30.3%) 3-dB bandwidth. It occupies an area of 0.16 mm2 and consumes 54 mW of power. The results show the tripler maintains its performance over a 13-dB input-power variation, confirming the effectiveness of the proposed calibration method.


  • Open Access

    A Low Jitter and Low Spur Fractional-N Digital PLL Based on a DTC Chopping Technique

    by Riccardo Moleri, Simone M. Dartizio, Michele Rossoni, Giacomo Castoro, Francesco Tesolin, Dmytro Cherniak, Carlo Samori, Andrea L. Lacaita, Salvatore Levantino

    This work presents a digital-to-time converter (DTC)-based fractional-N digital phase-locked loop (PLL) designed to achieve simultaneously low jitter and low spurs. We introduce a novel DTC chopping technique that effectively mitigates fractional spurs, which we identify as predominantly arising from even-order nonlinearity invariable-slope (VS) DTCs. The proposed technique suppresses such spurs by randomly alternating the DTC position between the reference and divider signal paths. In addition, it proves effective in reducing the DTC flicker noise contribution. To ensure robust operation across process, voltage, and temperature (PVT) spreads, the design incorporates several background adaptive digital algorithms. Fabricated in a 28-nm CMOS process, the synthesizer occupies an active area of 0.22 mm2 and consumes 16.7 mW. At a 9.275-GHz near-integer channel, the measured worst case in-band fractional spur remains below −63 dBc, and the integrated rms jitter under 80 fs, yielding a jitter-power figure of merit (FoM) of −249.8 dB.


  • A Low-Noise Digital PLL With an Adaptive Common-Mode Resonance Tuning Technique for Voltage-Biased Oscillators

    by Stefano Gallucci, Francesco Tesolin, Pietro Salvi, Daniele Lodi Rizzini, Riccardo Moleri, Francesco Buccoleri, Michele Rossoni, Giacomo Castoro, Carlo Samori, Andrea Leonardo Lacaita, et al.

    This work presents a digital phase-locked loop (PLL) incorporating an adaptive common-mode (CM) resonance tuning technique applied to a voltage-biased digitally-controlled oscillator (DCO). The method leverages the principle that the sensitivity of the oscillator frequency to a dither signal injected into the gate voltage of the cross-coupled transistors diminishes to near zero when the CM resonance is optimally tuned for minimal phase noise (PN). By detecting and nullifying this sensitivity, the proposed technique automatically adjusts the CM resonance to its ideal value. This background operation is continuous across the entire tuning range. The concept was validated through a digital PLL prototype fabricated in a 28-nm CMOS process, which achieved a jitter of 45.9 fs, a power-versus-jitter figure-of-merit of −257 dB, and a PN of −146.6 dBc/Hz at 10-MHz offset from a 4.75-GHz carrier, all within an active area of 0.21 mm2 .


  • A Low-Jitter Fractional- N Digital PLL With Spur Cancellation Based on a Multi-DTC Topology

    by Giacomo Castoro, Simone M. Dartizio, Michele Rossoni, Francesco Tesolin, Francesco Buccoleri, Dmytro Cherniak, Carlo Samori, Andrea L. Lacaita, Salvatore Levantino

    This work presents a low-jitter and low-spur fractional-N digital phase-locked loop (PLL) with a multi-path topology, each path having its own digital-to-time converter (DTC) and phase detector (PD). We show that, by driving each DTC with properly shifted quantization error sequences and then combining the PD outputs, the dominant fractional spurs due to DTC non-linearity can be canceled out and a significant reduction in DTC jitter is obtained. A number of background adaptive digital algorithms are introduced to ensure a robust operation across PVT spreads. The implemented PLL prototype, fabricated in a 28 nm CMOS process, has an active area of 0.36 mm2 and dissipates 17.9 mW. At 9.25 GHz near-integer channels, the measured worst case fractional spur is below $-\textrm {60}$ dBc, with an rms jitter of 77.1 fs, leading to $-\textrm {249.7}$ dB jitter-power figure-of-merit.


  • Open Access

    Localized LO Phase Shifting for Phased Array Systems

    by Francesco Tesolin, Salvatore Levantino

    Multiple-input-multiple-output is a promising technology to enable spatial multiplexing and improve throughput in wireless communication systems. The phase shifter needed in each element of the phased array to perform the electronic steering of the beam typically introduces a non-ideal transfer function in the signal path and consumes significant area and power, making it a major source of cost and dissipation. To address those issues, this chapter describes a novel technique referred to as localized LO phase-shifting, where the array of phase shifters in the receiver and in the transmitter is replaced by an array of synchronized PLLs, providing the local oscillation to each path, with fine and inherently linear phase regulation. This approach not only helps reduce power consumption and area occupation, in modern CMOS nodes, but also improves phase noise since the beam is formed by the combination of uncorrelated noise sources. To demonstrate the concept, a dual-element LO phase-shifting system, based on fractional-N digital PLLs in the 8.5-to-10.0-GHz range, is implemented in a standard 28-nm CMOS process. Each element occupies 0.23 mm2 of area and dissipates 20 mW of power. An arbitrary phase shift between the LO outputs can be set over the full 360 $$^{\circ }$$ ∘ range with a resolution of 0.7 millidegrees. The measured rms phase accuracy is 0.76 $$^{\circ }$$ ∘ , and the peak-to-peak phase error is 2.1 $$^{\circ }$$ ∘ , without requiring any linearity or gain calibration. Combining the outputs of the two elements, the measured integrated random jitter scales down from 58.5 to 44.6 fs rms.

  • A Low-Noise Fractional-N Digital PLL Using a Resistor-Based Inverse-Constant-Slope DTC

    by Pietro Salvi, Simone M. Dartizio, Michele Rossoni, Francesco Tesolin, Giacomo Castoro, Andrea L. Lacaita, Salvatore Levantino

    This work presents a digital-to-time converter (DTC)-based fractional- $N$ phase-locked loop (PLL) achieving low jitter and low spurs. Thanks to the proposed resistor-based inverse-constant-slope (R-ICS) DTC, the DTC random jitter is drastically reduced while retaining the excellent linearity performance of the conventional ICS-DTC architecture. Moreover, a tailored DTC range reduction technique is introduced to further improve DTC random noise. The PLL prototype has been fabricated in 28-nm CMOS and consumes 16.7 mW, with an active area of 0.21 mm 2 . It generates an output frequency in the 8.75–10.25-GHz range from a 125-MHz input reference frequency. At 9.25-GHz near-integer channels, it achieves a 67-fs rms jitter, a $-$ 108.5-dBc/Hz in-band phase noise (at 10-kHz offset), and fractional spurs below $-$ 63 dBc.


  • A Low-Jitter Fractional- N Digital PLL Adopting a Reverse-Concavity Variable-Slope DTC

    by Michele Rossoni, Simone M. Dartizio, Francesco Tesolin, Giacomo Castoro, Riccardo Dell'Orto, Andrea L. Lacaita, Salvatore Levantino

    This article presents a fractional- $N$ digital-to-time converter (DTC)-based digital phase-locked loop (PLL), achieving simultaneously low phase noise and low spurious tones. The PLL adopts a novel DTC circuit, denoted as reverse-concavity variable-slope (VS), which breaks the tradeoff between power consumption, phase noise, and linearity, which is typical of conventional VS-DTCs. A dedicated digital algorithm, working in the background of the PLL, is introduced to minimize DTC nonlinearity. The PLL prototype, fabricated in 28-nm bulk CMOS, has an active area of 0.21 mm $^2$ and dissipates 17.5 mW. At the near-integer channel around 8.75 GHz, it shows a worst case fractional spur of $-$ 63.4 dBc and an integrated rms jitter of 57.3 fs, including spurs. This results in a power–jitter figure of merit of $-$ 252.4 dB.


  • A 10-GHz Digital-PLL-Based Chirp Generator With Parabolic Non-Uniform Digital Predistortion for FMCW Radars

    by Francesco Tesolin, Simone M. Dartizio, Giacomo Castoro, Francesco Buccoleri, Michele Rossoni, Dmytro Cherniak, Carlo Samori, Andrea L. Lacaita, Salvatore Levantino

    This article describes a 10-GHz chirp generator for frequency-modulated continuous-wave (FMCW) radars, that is based on a digital PLL (DPLL) with a two-point injection of the modulation signal. A new digital predistortion (DPD) algorithm is introduced that is specifically tailored to mitigate the impact of the nonlinear non-smooth tuning curve of a digitally controlled oscillator (DCO) optimized for a low phase noise. The algorithm estimates in the background a non-uniform piecewise parabolic (PWP) interpolation of the digital inverse of the DCO tuning curve, using an adaptive set of non-uniformly distributed breakpoints. The breakpoints are automatically placed at the corner points of the tuning characteristic. The chirp generator, implemented in a 28-nm CMOS process, dissipates 21 mW and generates sawtooth and triangular chirp frequency modulations with slope up to 680 MHz/ $\mu$ s and bandwidth up to 680 MHz, while keeping the rms frequency error below 150 kHz and the phase noise at 1-MHz offset at $-116.5$ dBc/Hz.


  • Top Cited Papers

    A Low-Spur and Low-Jitter Fractional- N Digital PLL Based on an Inverse-Constant-Slope DTC and FCW Subtractive Dithering

    by Simone M. Dartizio, Francesco Tesolin, Giacomo Castoro, Francesco Buccoleri, Michele Rossoni, Dmytro Cherniak, Carlo Samori, Andrea L. Lacaita, Salvatore Levantino

    This work presents a low-spur and low-jitter fractional- $N$ digital phase-locked loop (PLL). To reduce the fractional spurs caused by the non-linearity of the digital-to-time converter (DTC), two novel solutions are introduced. First, the inverse-constant-slope DTC achieves high-linearity, thanks to its immunity to channel-length modulation and non-linear parasitic capacitances. Second, the frequency-control-word (FCW) subtractive dithering technique randomizes the quantization error of the $\Delta \Sigma$ modulator driving the PLL divider ratio without requiring an increased DTC dynamic range and pushing the fractional spurs outside the PLL bandwidth. The prototype, implemented in a 28-nm CMOS process, has an active area of 0.33 mm $^2$ and dissipates 17.2 mW. At fractional- $N$ channels near 9.25 GHz, the measured in-band fractional spurs and the rms jitter are below $-$ 70 dBc and 77 fs, respectively, leading to a jitter-power figure of merit of $-$ 249.9 dB.


  • A Novel LO Phase-Shifting System Based on Digital Bang-Bang PLLs With Background Phase-Offset Correction for Integrated Phased Arrays

    by Francesco Tesolin, Simone M. Dartizio, Francesco Buccoleri, Alessio Santiccioli, Luca Bertulessi, Carlo Samori, Andrea L. Lacaita, Salvatore Levantino

    An LO phase-shifting system based on digital fractional- N bang-bang phase-locked loops (PLLs) in the 8.5–10.0-GHz range is presented. A direct phase modulation method is leveraged to perform LO phase-shifting directly within the frequency synthesizer, leading to an inherently linear phase-shifting characteristic, even in the presence of digital-to-time converter (DTC) nonlinearities. Synchronization between fractional- N PLL cores is achieved by clocking with the same reference clock the $\Delta \Sigma$ modulator driving the frequency divider of each core. The adoption of a digital phase-offset correction technique canceling out timing skews greatly simplifies the reference-clock distribution and DTC matching. A dual-core prototype is implemented in a standard 28-nm CMOS process, where each element occupies 0.23-mm $^\text{2}$ area and dissipates 20-mW power. An arbitrary phase shift between the LO outputs can be set over the 360 $^\circ$ range with a resolution of 0.7 millidegree (19 bits). The rms phase accuracy is 0.76 $^\circ$ , and the peak-to-peak phase error is 2.1 $^\circ$ , without requiring any linearity or gain calibration. Each LO element features a $-$ 58.7 dBc in-band fractional spur and a $-$ 70 dBc reference spur, with a jitter versus power figure-of-merit of $-$ 253.5 and $-$ 250.0 dB for integer- N and fractional- N channels, respectively. The combined outputs of the two PLL cores reach an absolute jitter integrated from 1 kHz to 100 MHz (including spurs) of 38.2 and 59.78 fs, in integer- N and near-integer fractional- N operations, respectively.