Dmitro Baulin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dmitro Baulin has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Stanislav Horielyshev
National Academy of the National Guard of Ukraine
12 shared publications - Mykhailo Ivanets
State Scientific Research Institute of Armament and Military Equipment Testing and Certification
7 shared publications - Igor Boikov
National Academy of the National Guard of Ukraine
6 shared publications - Hryhorii Ivanets
Ivan Kozhedub Kharkiv National Air Force University
5 shared publications - Aleksandr Nakonechnyi
Ivan Kozhedub Kharkiv National Air Force University
4 shared publications - Mikhail Podrigalo
National Academy of the National Guard of Ukraine
3 shared publications
Latest Publications
- Open Access
- 3 September 2026
- Published by National Academy of the National Guard of Ukraine in The collection of scientific works of the National Academy of the National Guard of Ukraine
- Vol. 47 (1) , 15-20
Methodology of experimental control of the characteristics of nitrocellulose powder
У статті проаналізовано різні методи оцінювання хімічної стабільності порохів і запропоновано експериментальну методику для визначення можливості їх регенерації. Описано експериментальне обладнання, яке застосовується для вимірювання сили пороху на основі енергетичного балансу. Під час довготривалого зберігання піроксилінові порохи, які використовуються в боєприпасах, зазнають неконтрольованих фізико-хімічних змін, що негативно позначається на їх балістичних властивостях. Вирішення проблеми тривалого використання нітроцелюлозних порохів може стати основою для розвитку теоретичних і методологічних підходів до їх регенерації задля забезпечення відповідності балістичних і енергетичних характеристик боєприпасів.
- 3 September 2026
- Published by National Academy of the National Guard of Ukraine in The collection of scientific works of the National Academy of the National Guard of Ukraine
- Vol. 47 (1) , 15-20
Open AccessMethodology of experimental control of the characteristics of nitrocellulose powder
У статті проаналізовано різні методи оцінювання хімічної стабільності порохів і запропоновано експериментальну методику для визначення можливості їх регенерації. Описано експериментальне обладнання, яке застосовується для вимірювання сили пороху на основі енергетичного балансу. Під час довготривалого зберігання піроксилінові порохи, які використовуються в боєприпасах, зазнають неконтрольованих фізико-хімічних змін, що негативно позначається на їх балістичних властивостях. Вирішення проблеми тривалого використання нітроцелюлозних порохів може стати основою для розвитку теоретичних і методологічних підходів до їх регенерації задля забезпечення відповідності балістичних і енергетичних характеристик боєприпасів.
- Open Access
- 29 April 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (3 (134)) , 25-36
Improving the efficiency of transportation convoys using unmanned vehicles
The object of this study is the movement process of a vehicle convoy formed with the help of unmanned vehicles. The research aims to solve the task related to improving the controllability, maneuverability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads. One of the ways to address this issue is the use of unmanned vehicles. The subject of this study is the assessment of the possibility to improve the indicators of maneuverability, controllability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads, through the use of unmanned vehicles. During the study, the concepts of controllability and maneuverability of unmanned vehicle convoys have been defined. The relationship between the use of unmanned vehicles and the improvement of maneuverability and controllability of convoys was established. The use of unmanned vehicles makes it possible to eliminate the need to consider braking distance when setting inter-vehicle distances and to reduce the safety gap from 5 meters to zero. The paper shows that the use of unmanned vehicle convoys improves maneuverability and controllability compared to conventional convoys. For example, the time to pass a short road section for a convoy of 40 vehicles traveling at 90 km/h is reduced by 60 seconds, and the length of a convoy of 20 vehicles moving at the same speed is reduced by 800 meters. An evaluation of the reduction in energy consumption for convoys with unmanned vehicles was carried out. A condition was derived, the fulfillment of which ensures a reduction in additional engine energy losses through the use of unmanned vehicles in a convoy. Applying the results will make it possible to bring the efficiency of road transport to the level of railroad transport, which is achieved by assembling vehicle trains
- 29 April 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (3 (134)) , 25-36
Open AccessImproving the efficiency of transportation convoys using unmanned vehicles
The object of this study is the movement process of a vehicle convoy formed with the help of unmanned vehicles. The research aims to solve the task related to improving the controllability, maneuverability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads. One of the ways to address this issue is the use of unmanned vehicles. The subject of this study is the assessment of the possibility to improve the indicators of maneuverability, controllability, energy efficiency of vehicle convoys, as well as the throughput capacity of roads, through the use of unmanned vehicles. During the study, the concepts of controllability and maneuverability of unmanned vehicle convoys have been defined. The relationship between the use of unmanned vehicles and the improvement of maneuverability and controllability of convoys was established. The use of unmanned vehicles makes it possible to eliminate the need to consider braking distance when setting inter-vehicle distances and to reduce the safety gap from 5 meters to zero. The paper shows that the use of unmanned vehicle convoys improves maneuverability and controllability compared to conventional convoys. For example, the time to pass a short road section for a convoy of 40 vehicles traveling at 90 km/h is reduced by 60 seconds, and the length of a convoy of 20 vehicles moving at the same speed is reduced by 800 meters. An evaluation of the reduction in energy consumption for convoys with unmanned vehicles was carried out. A condition was derived, the fulfillment of which ensures a reduction in additional engine energy losses through the use of unmanned vehicles in a convoy. Applying the results will make it possible to bring the efficiency of road transport to the level of railroad transport, which is achieved by assembling vehicle trains
- Open Access
- 9 April 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(7),p. 58-66
DEVELOPMENT OF A METHOD FOR SPHERICAL APPROXIMATION OF LUNEBERG SPHERICAL LENSES
The use of a Luneberg lens allows you to significantly increase the effective scattering surface of unmanned aerial vehicles, thus simulating more significant targets. This effect is achieved by smoothly decreasing the dielectric constant from the center of the lens to its edge. It is quite difficult to manufacture a classic Luneberg lens with a continuous law of change of the dielectric constant (refractive index) along its radius. In practice, to ensure a decrease in the dielectric constant of a spherical Luneberg lens as its radius increases, they switch to a stepwise approximation of the law of change of the dielectric constant using a multilayer lens design. The technical implementation of a multilayer spherical Luneberg lens is carried out by dividing it into layers with different dielectric constants, which increase from the outer radius of the sphere to the center. Within one layer, the dielectric constant remains constant. To implement the stepwise approximation of the law of change of dielectric permittivity, various methods of layer-by-layer approximation of the body of a spherical Luneberg lens are used. The following methods of dividing the lens into layers are possible: uniform division by refractive index; uniform division by dielectric permittivity; uniform division by radius. A method of layer-by-layer approximation is proposed for different methods of dividing the lens into layers and algorithms are presented. The average absolute error of approximation is chosen as the criterion for the effectiveness of the approximation of the stepwise approximation of the law of change of dielectric permittivity to the theoretical one. The conducted studies have shown that the best approximation of the dielectric permittivity to the theoretical law of change is ensured by uniformly dividing the Luneberg lens into layers by radius. For a six-layer spherical Luneberg lens, the absolute error in the approximation of the dielectric constant to the theoretical value with a uniform distribution along the radius is no more than 0.0663 (6.7%).
- 9 April 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(7),p. 58-66
Open AccessDEVELOPMENT OF A METHOD FOR SPHERICAL APPROXIMATION OF LUNEBERG SPHERICAL LENSES
The use of a Luneberg lens allows you to significantly increase the effective scattering surface of unmanned aerial vehicles, thus simulating more significant targets. This effect is achieved by smoothly decreasing the dielectric constant from the center of the lens to its edge. It is quite difficult to manufacture a classic Luneberg lens with a continuous law of change of the dielectric constant (refractive index) along its radius. In practice, to ensure a decrease in the dielectric constant of a spherical Luneberg lens as its radius increases, they switch to a stepwise approximation of the law of change of the dielectric constant using a multilayer lens design. The technical implementation of a multilayer spherical Luneberg lens is carried out by dividing it into layers with different dielectric constants, which increase from the outer radius of the sphere to the center. Within one layer, the dielectric constant remains constant. To implement the stepwise approximation of the law of change of dielectric permittivity, various methods of layer-by-layer approximation of the body of a spherical Luneberg lens are used. The following methods of dividing the lens into layers are possible: uniform division by refractive index; uniform division by dielectric permittivity; uniform division by radius. A method of layer-by-layer approximation is proposed for different methods of dividing the lens into layers and algorithms are presented. The average absolute error of approximation is chosen as the criterion for the effectiveness of the approximation of the stepwise approximation of the law of change of dielectric permittivity to the theoretical one. The conducted studies have shown that the best approximation of the dielectric permittivity to the theoretical law of change is ensured by uniformly dividing the Luneberg lens into layers by radius. For a six-layer spherical Luneberg lens, the absolute error in the approximation of the dielectric constant to the theoretical value with a uniform distribution along the radius is no more than 0.0663 (6.7%).
- Open Access
- 28 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 41-51
COMPARATIVE ANALYSIS OF THE ADVANTAGES AND DISADVANTAGES OF THE COMBAT USE OF DIFFERENT TYPES OF MANPADE ANTI-AIRMISSILE SYSTEMS
An analysis of the nature of armed struggle in recent decades indicates a sharp increase in the influence of modern weapons and military equipment on the course of military operations. Currently, weapons and military equipment form the basis of the combat power of the armed forces of any state and are a determining factor in achieving success in a war or armed conflict. One of the characteristic features of the Russian Federation’s aggressive military actions against Ukraine is the widespread use of air forces, in particular, airplanes, helicopters, and unmanned aerial vehicles equipped with cruise missiles of various types. To strike Ukraine, the enemy uses air-, sea-, and ground-based cruise missiles, ballistic and anti-aircraft guided missiles, and attack unmanned aerial vehicles. Today, modern man-portable anti-aircraft missile systems have become one of the most effective and widespread means of combating air targets at low altitudes during combat operations (operations). The use of such complexes sharply limits the altitude range of use of all types of manned combat aircraft and has a negative impact on the accuracy of strikes against ground and surface targets. The Armed Forces of Ukraine are actively using Soviet, Polish, American, British and French man-portable anti-aircraft missile systems (provided to Ukraine by NATO and EU countries) against Russian aviation. A comparative analysis of the main characteristics, advantages and disadvantages of various types of man-portable anti-aircraft missile systems currently in service with the Ukrainian armed forces was carried out, in the interests of increasing the effectiveness of their use in different combat conditions.
- 28 December 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 41-51
Open AccessCOMPARATIVE ANALYSIS OF THE ADVANTAGES AND DISADVANTAGES OF THE COMBAT USE OF DIFFERENT TYPES OF MANPADE ANTI-AIRMISSILE SYSTEMS
An analysis of the nature of armed struggle in recent decades indicates a sharp increase in the influence of modern weapons and military equipment on the course of military operations. Currently, weapons and military equipment form the basis of the combat power of the armed forces of any state and are a determining factor in achieving success in a war or armed conflict. One of the characteristic features of the Russian Federation’s aggressive military actions against Ukraine is the widespread use of air forces, in particular, airplanes, helicopters, and unmanned aerial vehicles equipped with cruise missiles of various types. To strike Ukraine, the enemy uses air-, sea-, and ground-based cruise missiles, ballistic and anti-aircraft guided missiles, and attack unmanned aerial vehicles. Today, modern man-portable anti-aircraft missile systems have become one of the most effective and widespread means of combating air targets at low altitudes during combat operations (operations). The use of such complexes sharply limits the altitude range of use of all types of manned combat aircraft and has a negative impact on the accuracy of strikes against ground and surface targets. The Armed Forces of Ukraine are actively using Soviet, Polish, American, British and French man-portable anti-aircraft missile systems (provided to Ukraine by NATO and EU countries) against Russian aviation. A comparative analysis of the main characteristics, advantages and disadvantages of various types of man-portable anti-aircraft missile systems currently in service with the Ukrainian armed forces was carried out, in the interests of increasing the effectiveness of their use in different combat conditions.
- Open Access
- 19 July 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 4,p. 66-78
Colorimetry method for nitrocellulose powder charge monitoring system
Nitrocellulose powders are unstable chemical compounds. Over time, the consumer properties of the powder charge can change so much that the charges will not only be unsuitable for their intended use, but also become dangerous for personnel and the barrel system. This is associated with the problem of establishing the terms of safe storage of powders and their operational suitability, the need for a constant system for monitoring their condition. However, in developed NATO countries, there is practically no system for monitoring powder charges throughout their entire shelf life. Some countries have some components of the above-mentioned system, but its elements do not fully cover the entire spectrum of the state of powder charges. For the monitoring system to work effectively, informative indicators are needed that allow determining the state of powder charges without the use of complex diagnostic equipment. One of such indicators is the color of the surface of the powder element. In this study, an automated method for assessing the quality of nitrocellulose powder charges by the color of their surface for further use as intended was developed. The use of this method will significantly reduce the time of assessment and decision-making by experts, and eliminate subjectivity. In addition, the method will allow creating a database of powder charges for further monitoring of their condition throughout the entire life cycle. To confirm the reliability and adequacy of the developed method, an experimental study was conducted. The study data showed that the proposed hypothesis is true, namely, during storage, nitrocellulose powder charges change the color of their surface, and it is possible to determine their shelf life
- 19 July 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 4,p. 66-78
Open AccessColorimetry method for nitrocellulose powder charge monitoring system
Nitrocellulose powders are unstable chemical compounds. Over time, the consumer properties of the powder charge can change so much that the charges will not only be unsuitable for their intended use, but also become dangerous for personnel and the barrel system. This is associated with the problem of establishing the terms of safe storage of powders and their operational suitability, the need for a constant system for monitoring their condition. However, in developed NATO countries, there is practically no system for monitoring powder charges throughout their entire shelf life. Some countries have some components of the above-mentioned system, but its elements do not fully cover the entire spectrum of the state of powder charges. For the monitoring system to work effectively, informative indicators are needed that allow determining the state of powder charges without the use of complex diagnostic equipment. One of such indicators is the color of the surface of the powder element. In this study, an automated method for assessing the quality of nitrocellulose powder charges by the color of their surface for further use as intended was developed. The use of this method will significantly reduce the time of assessment and decision-making by experts, and eliminate subjectivity. In addition, the method will allow creating a database of powder charges for further monitoring of their condition throughout the entire life cycle. To confirm the reliability and adequacy of the developed method, an experimental study was conducted. The study data showed that the proposed hypothesis is true, namely, during storage, nitrocellulose powder charges change the color of their surface, and it is possible to determine their shelf life
- Open Access
- 29 March 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 2,p. 119-130
Development of a method for predicting barrel wear resistance when using ammunition with a long storage life
Despite the fact that a large amount of small arms ammunition has been used up over the past two years, their stocks in warehouses and arsenals in various countries are quite large. And their shelf life is 20 years or more. In addition, over time, the number of such ammunition will increase. Among the large number of requirements for modern small arms, one can highlight the provision of the necessary survivability of its parts and mechanisms. The problem of barrel survivability is especially important. One of the factors affecting barrel survivability is changes in internal ballistics parameters. In turn, these parameters change when using ammunition whose service life exceeds the warranty. In this regard, the task of studying the survivability indicators of small arms barrels when using post-warranty ammunition seems relevant. The requirements for barrel systems and factors affecting the wear of the barrel bore of powder charges during long-term storage have been determined. An analysis of changes in the ballistic characteristics of powder charges was carried out, which allows to state increased wear of barrels when using ammunition with long storage periods. The dependencies for determining the limit number of shots from a weapon sample are analyzed. A method for predicting barrel survivability when using long-term storage ammunition is proposed. Data are presented on an experimental study to determine changes in barrel survivability as a result of the use of long-term storage ammunition by estimating changes in the initial velocity of the projectile. Based on the results obtained, ways for further research are proposed in the direction of expanding the range of ammunition and weapons
- 29 March 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 2,p. 119-130
Open AccessDevelopment of a method for predicting barrel wear resistance when using ammunition with a long storage life
Despite the fact that a large amount of small arms ammunition has been used up over the past two years, their stocks in warehouses and arsenals in various countries are quite large. And their shelf life is 20 years or more. In addition, over time, the number of such ammunition will increase. Among the large number of requirements for modern small arms, one can highlight the provision of the necessary survivability of its parts and mechanisms. The problem of barrel survivability is especially important. One of the factors affecting barrel survivability is changes in internal ballistics parameters. In turn, these parameters change when using ammunition whose service life exceeds the warranty. In this regard, the task of studying the survivability indicators of small arms barrels when using post-warranty ammunition seems relevant. The requirements for barrel systems and factors affecting the wear of the barrel bore of powder charges during long-term storage have been determined. An analysis of changes in the ballistic characteristics of powder charges was carried out, which allows to state increased wear of barrels when using ammunition with long storage periods. The dependencies for determining the limit number of shots from a weapon sample are analyzed. A method for predicting barrel survivability when using long-term storage ammunition is proposed. Data are presented on an experimental study to determine changes in barrel survivability as a result of the use of long-term storage ammunition by estimating changes in the initial velocity of the projectile. Based on the results obtained, ways for further research are proposed in the direction of expanding the range of ammunition and weapons
- Open Access
- 18 December 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 2,p. 33-39
COMPARATIVE ANALYSIS OF COMBAT CAPABILITIES OF MODERN TANKS OF VARIOUS TYPES
Сучасна війна є випробуванням матеріальних та духовних сил народу, держави і її Збройних Сил, що спонукає кожну країну підтримувати свою обороноздатність на такому рівні, який гарантує надійний захист суспільства. Аналіз характеру збройної боротьби останніх десятиліть свідчить про різке підвищення впливу сучасного озброєння та військової техніки на хід і результат воєнних дій. На даний час озброєння та військової техніка складають основу бойової могутності збройних сил будь-якої держави та є визначальним фактором досягнення успіху у війні чи збройному конфлікті. Незважаючи на бурхливий розвиток протитанкових засобів ураження та зменшення живучості на полі бою основні бойові танки на сьогоднішній день залишаються одним із вирішальних засобів сучасного загальновійськового бою, який відзначається динамічністю, насиченістю та швидкоплинністю. Вони забезпечують бойову стійкість власних сил в обороні та просуванні під час наступу, знищують ворожу бронетехніку, вогневі точки та живу силу противника. Проведено порівняльний аналіз основних характеристик сучасних бойових танків, переваг та недоліків різних типів машин зарубіжного та вітчизняного виробництва, які застосовують Збройні Сил України для оборони держави та протидії агресії Росії проти України, в інтересах підвищення ефективності їх застосування в тих чи інших умовах бойової обстановки. Західні зразки сучасних танків та українські танк «Оплот» за деякими суттєвими бойовими характеристиками переважають сучасний російський танк Т-90, зокрема: в потужності двигуна та його надійності роботи (перегрів двигуна та вихід з ладу); в ефективності оптико-електронної протидії оптичним засобам противника; в ефективності динамічного захисту та протидії сучасним засобам ураження; в досконалості системи управління вогнем; в достатності бронювання машини; в ефективності дій в умовах міста. Ключові слова: війна, бойовий танк, тактико-технічні характеристики, ефективність, порівняльний аналіз.
- 18 December 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 2,p. 33-39
Open AccessCOMPARATIVE ANALYSIS OF COMBAT CAPABILITIES OF MODERN TANKS OF VARIOUS TYPES
Сучасна війна є випробуванням матеріальних та духовних сил народу, держави і її Збройних Сил, що спонукає кожну країну підтримувати свою обороноздатність на такому рівні, який гарантує надійний захист суспільства. Аналіз характеру збройної боротьби останніх десятиліть свідчить про різке підвищення впливу сучасного озброєння та військової техніки на хід і результат воєнних дій. На даний час озброєння та військової техніка складають основу бойової могутності збройних сил будь-якої держави та є визначальним фактором досягнення успіху у війні чи збройному конфлікті. Незважаючи на бурхливий розвиток протитанкових засобів ураження та зменшення живучості на полі бою основні бойові танки на сьогоднішній день залишаються одним із вирішальних засобів сучасного загальновійськового бою, який відзначається динамічністю, насиченістю та швидкоплинністю. Вони забезпечують бойову стійкість власних сил в обороні та просуванні під час наступу, знищують ворожу бронетехніку, вогневі точки та живу силу противника. Проведено порівняльний аналіз основних характеристик сучасних бойових танків, переваг та недоліків різних типів машин зарубіжного та вітчизняного виробництва, які застосовують Збройні Сил України для оборони держави та протидії агресії Росії проти України, в інтересах підвищення ефективності їх застосування в тих чи інших умовах бойової обстановки. Західні зразки сучасних танків та українські танк «Оплот» за деякими суттєвими бойовими характеристиками переважають сучасний російський танк Т-90, зокрема: в потужності двигуна та його надійності роботи (перегрів двигуна та вихід з ладу); в ефективності оптико-електронної протидії оптичним засобам противника; в ефективності динамічного захисту та протидії сучасним засобам ураження; в досконалості системи управління вогнем; в достатності бронювання машини; в ефективності дій в умовах міста. Ключові слова: війна, бойовий танк, тактико-технічні характеристики, ефективність, порівняльний аналіз.
- Open Access
- 29 September 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 5,p. 3-13
Study of the nitrocellulose gunpowder regeneration process using hydrogen peroxide
World experience in storing ammunition shows that during long-term storage, pyroxylin gunpowders used in ammunition are capable of arbitrarily undergoing various physical and chemical transformations, which negatively affects the ballistic characteristics of ammunition. In some countries, ammunition is in use with a shelf life of 30–35 years or more. Factors influencing the physicochemical stability of gunpowder charges during long-term storage have been identified. An analysis of the chemical processes occurring in nitrocellulose gunpowders (NCP) during long-term storage is carried out, and the possibility of regenerating NCP by treatment with hydrogen peroxide is substantiated. It is indicated that there are no methods for regenerating gunpowder charges with long shelf life. It has been shown that one of the ways to increase the ballistic and energy characteristics of long-term storage ammunition can be the regeneration of nitrocellulose gunpowder charges. Data are presented on an experimental study to determine the characteristics of NCP after regeneration. It has been shown that when regenerating nitrocellulose gunpowder charges with hydrogen peroxide, the calorific value of the starting material increases. Based on the results obtained, an approach to assessing the feasibility of using regeneration technology is proposed. This approach is based on the effect of mass replenishment during the regeneration process due to ongoing chemical processes and heat and mass transfer. The ways for further research on the use of nitrocellulose as a high-calorie fuel are presented
- 29 September 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 5,p. 3-13
Open AccessStudy of the nitrocellulose gunpowder regeneration process using hydrogen peroxide
World experience in storing ammunition shows that during long-term storage, pyroxylin gunpowders used in ammunition are capable of arbitrarily undergoing various physical and chemical transformations, which negatively affects the ballistic characteristics of ammunition. In some countries, ammunition is in use with a shelf life of 30–35 years or more. Factors influencing the physicochemical stability of gunpowder charges during long-term storage have been identified. An analysis of the chemical processes occurring in nitrocellulose gunpowders (NCP) during long-term storage is carried out, and the possibility of regenerating NCP by treatment with hydrogen peroxide is substantiated. It is indicated that there are no methods for regenerating gunpowder charges with long shelf life. It has been shown that one of the ways to increase the ballistic and energy characteristics of long-term storage ammunition can be the regeneration of nitrocellulose gunpowder charges. Data are presented on an experimental study to determine the characteristics of NCP after regeneration. It has been shown that when regenerating nitrocellulose gunpowder charges with hydrogen peroxide, the calorific value of the starting material increases. Based on the results obtained, an approach to assessing the feasibility of using regeneration technology is proposed. This approach is based on the effect of mass replenishment during the regeneration process due to ongoing chemical processes and heat and mass transfer. The ways for further research on the use of nitrocellulose as a high-calorie fuel are presented
- Open Access
- 7 June 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 68-75
IMPROVING MANEUVERABILITY OF A WHEELED VEHICLE BY IMPROVING TURN CONTROL METHOD
A large number of scientific works and design developments are devoted to the study and improvement of the properties of maneuverability, which is also a complex (complex) property. At one time, the need to reduce the building volume required the installation of swivel wheels on the front steering axle of the car. However, in this case, additional resistance to the movement of the machine arose, which is due to the discrepancy between the trajectories of the movement of the front outer and inner guide wheels with their trajectories during an ideal turn. The development of the designs of electric vehicles and hybrid vehicles allows for separate control of the front wheels. The analysis of the whole variety of indicators and criteria of maneuverability in general and individual properties was carried out. Unlike other systematization of these indicators and criteria, it is proposed to divide these indicators and criteria into three main groups. All indicators and criteria used to assess the maneuverability of vehicles are also used to assess the maneuverability of wheeled tractors with a center of mass shifted to the rear axle and, therefore, have low controllability. Force and energy criteria can be used in the design of cars and tractors to ensure the ability of the latter to maneuver. In addition, as a result of the study, a combined method for controlling the movement of a two-axle swivel bogie of a wheeled vehicle has been improved due to the fact that its rotation is carried out by two torque control moments. The first of these control torques is generated by the driver through the steering and power cylinder. The second torque control moment is created due to the difference in torques on the wheels of the outer and inner sides of the two-axle swivel bogie. The implementation of these rules for regulating the distribution of traction forces between the sides makes it possible to overcome the resistance to rotation of a two-axle swivel bogie and improve the quality of motion control of the specified bogie and wheeled vehicle. Keywords: maneuverability, separate control, wheeled vehicle, control method, two-axle swivel bogie
- 7 June 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 68-75
Open AccessIMPROVING MANEUVERABILITY OF A WHEELED VEHICLE BY IMPROVING TURN CONTROL METHOD
A large number of scientific works and design developments are devoted to the study and improvement of the properties of maneuverability, which is also a complex (complex) property. At one time, the need to reduce the building volume required the installation of swivel wheels on the front steering axle of the car. However, in this case, additional resistance to the movement of the machine arose, which is due to the discrepancy between the trajectories of the movement of the front outer and inner guide wheels with their trajectories during an ideal turn. The development of the designs of electric vehicles and hybrid vehicles allows for separate control of the front wheels. The analysis of the whole variety of indicators and criteria of maneuverability in general and individual properties was carried out. Unlike other systematization of these indicators and criteria, it is proposed to divide these indicators and criteria into three main groups. All indicators and criteria used to assess the maneuverability of vehicles are also used to assess the maneuverability of wheeled tractors with a center of mass shifted to the rear axle and, therefore, have low controllability. Force and energy criteria can be used in the design of cars and tractors to ensure the ability of the latter to maneuver. In addition, as a result of the study, a combined method for controlling the movement of a two-axle swivel bogie of a wheeled vehicle has been improved due to the fact that its rotation is carried out by two torque control moments. The first of these control torques is generated by the driver through the steering and power cylinder. The second torque control moment is created due to the difference in torques on the wheels of the outer and inner sides of the two-axle swivel bogie. The implementation of these rules for regulating the distribution of traction forces between the sides makes it possible to overcome the resistance to rotation of a two-axle swivel bogie and improve the quality of motion control of the specified bogie and wheeled vehicle. Keywords: maneuverability, separate control, wheeled vehicle, control method, two-axle swivel bogie
- Open Access
- 25 May 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 29-39
Improving the maneuverability of vehicles by using front swivel axles with separate electric wheels
There is a need for vehicles to maneuver when there are traffic jams, to overcome narrow streets and various obstacles. This leads to increased requirements for dynamism and maneuverability of vehicles. The authors present the results of the development and research of the steering control of the vehicle, which provides increased maneuverability. Such circumstances significantly affect the increase in maneuverability of wheeled vehicles, including tractors, for which the use of front suspension axles is possible in terms of layout. The use of a front swing axle with electric motor-wheels with separate control will increase the maneuverability of a two-axle vehicle and minimize the steering effort when turning. When solving the task, a mathematical model of the movement of the vehicle on a turn was created. The forces in the contact of the wheels with the road surface were determined, which made it possible to determine the forces and moments of resistance to the rotation of the front axle. Rational laws of control of turning the front axle, providing minimal resistance to the movement of the vehicle, were obtained. A vehicle turning control option is proposed, in which the wheels of the outer and inner sides are alternately braked when the vehicle enters and exits the turn. In addition, it is possible to alternately create a torque difference on the wheels of the outer and inner sides of the front axle. Using the proposed turn control options, it is possible to create a multi-axle vehicle with a rocking axle. The materials of the article on the controllability of vehicles depending on the design of the steering and front axle are of interest to researchers, designers of mobile equipment, graduate students and students of engineering specialties
- 25 May 2023
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 29-39
Open AccessImproving the maneuverability of vehicles by using front swivel axles with separate electric wheels
There is a need for vehicles to maneuver when there are traffic jams, to overcome narrow streets and various obstacles. This leads to increased requirements for dynamism and maneuverability of vehicles. The authors present the results of the development and research of the steering control of the vehicle, which provides increased maneuverability. Such circumstances significantly affect the increase in maneuverability of wheeled vehicles, including tractors, for which the use of front suspension axles is possible in terms of layout. The use of a front swing axle with electric motor-wheels with separate control will increase the maneuverability of a two-axle vehicle and minimize the steering effort when turning. When solving the task, a mathematical model of the movement of the vehicle on a turn was created. The forces in the contact of the wheels with the road surface were determined, which made it possible to determine the forces and moments of resistance to the rotation of the front axle. Rational laws of control of turning the front axle, providing minimal resistance to the movement of the vehicle, were obtained. A vehicle turning control option is proposed, in which the wheels of the outer and inner sides are alternately braked when the vehicle enters and exits the turn. In addition, it is possible to alternately create a torque difference on the wheels of the outer and inner sides of the front axle. Using the proposed turn control options, it is possible to create a multi-axle vehicle with a rocking axle. The materials of the article on the controllability of vehicles depending on the design of the steering and front axle are of interest to researchers, designers of mobile equipment, graduate students and students of engineering specialties