Mohammed Kadhim Allawi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammed Kadhim Allawi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Mahmood Hasan Oudah
Mechanical Power Engineering Department, Technical Engineering College, Middle Technical University, Baghdad, Iraq
4 shared publications - Mohanad Kadhim Mejbel
Department of Materials Engineering Technology , Technical Engineering College-Baghdad , Middle Technical University , Baghdad 10074 , Iraq , mtu.edu.iq
4 shared publications - Fouad Alwan Saleh
Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq
2 shared publications - Abdulrahman Shakir Mahmood
College of Mechanical Engineering, University of Technology- Iraq
1 shared publication Ahmed Oleiwi Samarmad
1 shared publication- Ali Khalid Shaker Al-Sayyab
Southern Technical University
1 shared publication
Latest Publications
- Open Access
- 1 May 2025
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 29 (3) , 338-343
The Effect of Hydrogen on Performance of Internal Combustion Engine Fueled by Compressed Natural Gas
The natural gas can readily serve as the replacement fuel for internal combustion engines. This work tested the SI engine when running on a hydrogen-enriched compressed natural gas (CNG) mixture. The modelling has been implemented at a range of engine speeds from 1000 to 5500 rpm with a full load, direct injection, and a spark-ignited engine with a compression ratio of 10. Engine performance influences were examined, especially regarding brake power, brake thermal efficiency (BTE), and brake specific fuel consumption (BSFC), in addition to the combustion characteristics like cylinder temperature and pressure. A Lotus Engine Simulation program was used for analyzing and modeling. The results demonstrated that the best performance and combustion characteristics were with mixtures that have increased in the H2 percentage. The results show that the brake power and BTE increased, and the BSFC decreased with the increase of hydrogen in the mixture. It was found that the brake power and BTE increased by 2% and 21% for HCNG 25, and the best reduction in BSFC was 6% for HCNG 20 compared to the CNG. It was also observed that maximum cylinder pressure (Pmax) and temperature (Tmax) increase with increasing percentage of H2 in the mixture.
- 1 May 2025
- Published by Mustansiriyah University College of Engineering in Journal of Engineering and Sustainable Development
- Vol. 29 (3) , 338-343
Open AccessThe Effect of Hydrogen on Performance of Internal Combustion Engine Fueled by Compressed Natural Gas
The natural gas can readily serve as the replacement fuel for internal combustion engines. This work tested the SI engine when running on a hydrogen-enriched compressed natural gas (CNG) mixture. The modelling has been implemented at a range of engine speeds from 1000 to 5500 rpm with a full load, direct injection, and a spark-ignited engine with a compression ratio of 10. Engine performance influences were examined, especially regarding brake power, brake thermal efficiency (BTE), and brake specific fuel consumption (BSFC), in addition to the combustion characteristics like cylinder temperature and pressure. A Lotus Engine Simulation program was used for analyzing and modeling. The results demonstrated that the best performance and combustion characteristics were with mixtures that have increased in the H2 percentage. The results show that the brake power and BTE increased, and the BSFC decreased with the increase of hydrogen in the mixture. It was found that the brake power and BTE increased by 2% and 21% for HCNG 25, and the best reduction in BSFC was 6% for HCNG 20 compared to the CNG. It was also observed that maximum cylinder pressure (Pmax) and temperature (Tmax) increase with increasing percentage of H2 in the mixture.
- Open Access
- 3 July 2024
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 17 (9) , 1929-1937
Study of the Flame Characteristics of Biodiesel Blend Fuel in a Semi-industrial Boiler
The experimental investigation aimed to determine how the use of biodiesel derived from dill and cresson oil affected the performance of semi-industrial burners. Furthermore, an investigation will be conducted to assess the combustion properties of different blends of biodiesel, specifically B10, B20, B40, and B60. The study looks at biodiesel's chemical makeup, physical properties, and how it works in the system that moves it to the burner and the burner simulator's burning process. Biodiesel exhibits comparable qualities to conventional diesel oil, enabling the possibility of blending it to achieve the desired ratio. The results suggest that increasing the percentage of biodiesel leads to a reduction in flame distance and a rise in flame temperature. Furthermore, the complete combustion of the fuel is responsible for the brilliant and transparent flame. Additionally, using dill and Cresson fuels that come from biodiesel raises the average flame temperature by about 17% and 16.1%, respectively, compared to regular diesel fuel.
- 3 July 2024
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 17 (9) , 1929-1937
Open AccessStudy of the Flame Characteristics of Biodiesel Blend Fuel in a Semi-industrial Boiler
The experimental investigation aimed to determine how the use of biodiesel derived from dill and cresson oil affected the performance of semi-industrial burners. Furthermore, an investigation will be conducted to assess the combustion properties of different blends of biodiesel, specifically B10, B20, B40, and B60. The study looks at biodiesel's chemical makeup, physical properties, and how it works in the system that moves it to the burner and the burner simulator's burning process. Biodiesel exhibits comparable qualities to conventional diesel oil, enabling the possibility of blending it to achieve the desired ratio. The results suggest that increasing the percentage of biodiesel leads to a reduction in flame distance and a rise in flame temperature. Furthermore, the complete combustion of the fuel is responsible for the brilliant and transparent flame. Additionally, using dill and Cresson fuels that come from biodiesel raises the average flame temperature by about 17% and 16.1%, respectively, compared to regular diesel fuel.
- Open Access
- 1 July 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (7) , 1-7
A Simulation of the Impact of Biodiesel Blends on Performance Parameters in Compression Ignition Engine
Recently, there has been significant interest in biodiesel since it depends on renewable resources, which is essential given the increasing depletion of fossil fuels. Using palm oil in biodiesel production is an innovative application of botanical resources in this sector. Simulation research...
- 1 July 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (7) , 1-7
Open AccessA Simulation of the Impact of Biodiesel Blends on Performance Parameters in Compression Ignition Engine
Recently, there has been significant interest in biodiesel since it depends on renewable resources, which is essential given the increasing depletion of fossil fuels. Using palm oil in biodiesel production is an innovative application of botanical resources in this sector. Simulation research...
- Open Access
- 1 January 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (1) , 115-126
Experimental Assessment of the Impact of Biodiesel Blends and Methanol on Emissions and Performance in a Semi-industrial Boiler
Recently, there has been a growing interest in biodiesel due to its utilisation of renewable resources, which is particularly significant given the increasing depletion of fossil fuel stocks. The utilisation of Cresson weed in biodiesel fuel production is a pioneering application of botanical...
- 1 January 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (1) , 115-126
Open AccessExperimental Assessment of the Impact of Biodiesel Blends and Methanol on Emissions and Performance in a Semi-industrial Boiler
Recently, there has been a growing interest in biodiesel due to its utilisation of renewable resources, which is particularly significant given the increasing depletion of fossil fuel stocks. The utilisation of Cresson weed in biodiesel fuel production is a pioneering application of botanical...
- Open Access
- 30 December 2020
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 17 (4)
Variable Valve Timing (VVT) Modelling by Lotus Engine Simulation Software
Variable valve timing (VVT) is an advanced modern technique applied in internal combustion engines by altering the valve lift event timing. This work aims to contribute to the continuing industrial VVT development to improve engine efficiency, fuel consumption and performance. To observe the influence on the spark-ignition (SI) engine’s performance, four valve timing strategies are selected carefully by varying the intake and exhaust valve timing. Lotus Engine Simulation, a simulation engineering software, is adapted in this study. The engine characteristics used in this modelling are spark engine, multicylinder, four strokes, port injection fuel system and constant compression ratio. A comparison between a conventional standard exhaust/intake valve timing and three other different timing cases is carried out. Results reveal that the overlap case of 98° showed a good brake-specific fuel consumption by approximately 3% less than the conventional case. An improvement of 6.2% for volume efficiency and 2.9% in brake thermal efficiency is also reported.
- 30 December 2020
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 17 (4)
Open AccessVariable Valve Timing (VVT) Modelling by Lotus Engine Simulation Software
Variable valve timing (VVT) is an advanced modern technique applied in internal combustion engines by altering the valve lift event timing. This work aims to contribute to the continuing industrial VVT development to improve engine efficiency, fuel consumption and performance. To observe the influence on the spark-ignition (SI) engine’s performance, four valve timing strategies are selected carefully by varying the intake and exhaust valve timing. Lotus Engine Simulation, a simulation engineering software, is adapted in this study. The engine characteristics used in this modelling are spark engine, multicylinder, four strokes, port injection fuel system and constant compression ratio. A comparison between a conventional standard exhaust/intake valve timing and three other different timing cases is carried out. Results reveal that the overlap case of 98° showed a good brake-specific fuel consumption by approximately 3% less than the conventional case. An improvement of 6.2% for volume efficiency and 2.9% in brake thermal efficiency is also reported.
- Open Access
- 1 July 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 881 (1)
Iraqi gasoline performance at low engine speeds
Four grades of gasoline fuel – obtained from Iraqi oil refineries – are used in this research to investigate their performance in spark-ignition (SI) engines. These grades are RON 77, RON 82, RON 87, and RON 93. We used a four-stroke, four-cylinder SI engine laboratory rig to conduct the experiments and calculate the engine performance for each gasoline grade. We compared the experimental results with the predicted numerical simulations carried out using a well-known commercial software called Lotus Engine Simulation (LES). The numerical results obtained using LES show good agreement with experimental findings. A higher gasoline grade shows better engine performance than lower grades owing to its superior quality and purity, better combustion characteristics and performance, and lower amount of gasoline inclusions. Gasoline fuel RON 93 provided the best engine performance in comparison to the remaining grades. The variation between the numerical and experimental results in all tested conditions was below 3%.
- 1 July 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 881 (1)
Open AccessIraqi gasoline performance at low engine speeds
Four grades of gasoline fuel – obtained from Iraqi oil refineries – are used in this research to investigate their performance in spark-ignition (SI) engines. These grades are RON 77, RON 82, RON 87, and RON 93. We used a four-stroke, four-cylinder SI engine laboratory rig to conduct the experiments and calculate the engine performance for each gasoline grade. We compared the experimental results with the predicted numerical simulations carried out using a well-known commercial software called Lotus Engine Simulation (LES). The numerical results obtained using LES show good agreement with experimental findings. A higher gasoline grade shows better engine performance than lower grades owing to its superior quality and purity, better combustion characteristics and performance, and lower amount of gasoline inclusions. Gasoline fuel RON 93 provided the best engine performance in comparison to the remaining grades. The variation between the numerical and experimental results in all tested conditions was below 3%.
- 31 March 2020
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 14 (3) , 151
A Simulation of the Effect of Iraqi Diesel Fuel Cetane Number on the Performance of a Compression Ignition Engine
A Simulation of the Effect of Iraqi Diesel Fuel Cetane Number on the Performance of a Compression Ignition Engine
- 31 March 2020
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 14 (3) , 151
A Simulation of the Effect of Iraqi Diesel Fuel Cetane Number on the Performance of a Compression Ignition Engine
A Simulation of the Effect of Iraqi Diesel Fuel Cetane Number on the Performance of a Compression Ignition Engine
- 11 September 2019
- Published by ZIbeline International Publishing in Journal of Mechanical Engineering Research and Developments
- Vol. 42 (5) , 211-215
ANALYSIS OF EXHAUST MANIFOLD OF SPARK-IGNITION ENGINE BY USING COMPUTATIONAL FLUID DYNAMICS (CFD)
- 11 September 2019
- Published by ZIbeline International Publishing in Journal of Mechanical Engineering Research and Developments
- Vol. 42 (5) , 211-215
ANALYSIS OF EXHAUST MANIFOLD OF SPARK-IGNITION ENGINE BY USING COMPUTATIONAL FLUID DYNAMICS (CFD)
- Open Access
- 11 September 2019
- Published by ZIbeline International Publishing in Journal of Mechanical Engineering Research and Developments
- Vol. 42 (5) , 224-231
EFFECTS OF WC, SiC, IRON AND GLASS FILLERS AND THEIR HIGH PERCENTAGE CONTENT ON ADHESIVE BOND STRENGTH OF AN ALUMINIUM ALLOY BUTT JOINT: AN EXPERIMENTAL STUDY
- 11 September 2019
- Published by ZIbeline International Publishing in Journal of Mechanical Engineering Research and Developments
- Vol. 42 (5) , 224-231
Open AccessEFFECTS OF WC, SiC, IRON AND GLASS FILLERS AND THEIR HIGH PERCENTAGE CONTENT ON ADHESIVE BOND STRENGTH OF AN ALUMINIUM ALLOY BUTT JOINT: AN EXPERIMENTAL STUDY