Junfeng Liu
Research Subjects
Research Interests
Junfeng Liu has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Haiyan Li
Beijing University of Civil Engineering and Architecture
7 shared publications - Xiaoran Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
7 shared publications Ziyang Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
5 shared publications- Ziyang Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
4 shared publications Yinrui Wang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
3 shared publicationsYiran Tian
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
3 shared publications
Latest Publications
- Open Access
- 6 February 2024
- Published by IWA Publishing in Water Science & Technology
- Vol. 89 (4) , 945-961
Occurrence and ecological risk of PAHs in urban road runoff in Beijing
The occurrence and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in different types of urban road runoff in Beijing during two typical rainfall events were studied. The average concentration of PAHs in road runoff particulate was in the order of Guanyuanqiao Road (ring road, 15,175 ng/L) > Huayuanqiao Road (primary road, 4,792 ng/L) > Dongcheng Alley (alley, 4,774 ng/L) > Nansihuan Viaduct (viaduct, 770 ng/L), much higher than dissolved PAHs. The total concentration of ∑16PAHs decreased with runoff scouring. Rainfall conditions and the accumulation of PAHs in the early rainfall period show a significant impact on PAHs pollution. The event mean concentration range of PAHs is 674–21,596 ng/L, following in the order of ring road > primary road > alley > viaduct. The proportion of four-ring PAHs was the highest. The first flush effect of PAHs is found in both rainfall events, and the effect of different ring PAHs is relatively similar. The content of PAHs is positively correlated with the amount of total organic carbon and suspended substance in runoff (r2> 0.72). The ecological risk assessment indicated that PAHs in road runoff except viaduct road corresponded to high risk.
- 6 February 2024
- Published by IWA Publishing in Water Science & Technology
- Vol. 89 (4) , 945-961
Open AccessOccurrence and ecological risk of PAHs in urban road runoff in Beijing
The occurrence and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in different types of urban road runoff in Beijing during two typical rainfall events were studied. The average concentration of PAHs in road runoff particulate was in the order of Guanyuanqiao Road (ring road, 15,175 ng/L) > Huayuanqiao Road (primary road, 4,792 ng/L) > Dongcheng Alley (alley, 4,774 ng/L) > Nansihuan Viaduct (viaduct, 770 ng/L), much higher than dissolved PAHs. The total concentration of ∑16PAHs decreased with runoff scouring. Rainfall conditions and the accumulation of PAHs in the early rainfall period show a significant impact on PAHs pollution. The event mean concentration range of PAHs is 674–21,596 ng/L, following in the order of ring road > primary road > alley > viaduct. The proportion of four-ring PAHs was the highest. The first flush effect of PAHs is found in both rainfall events, and the effect of different ring PAHs is relatively similar. The content of PAHs is positively correlated with the amount of total organic carbon and suspended substance in runoff (r2> 0.72). The ecological risk assessment indicated that PAHs in road runoff except viaduct road corresponded to high risk.
- Open Access
- 27 March 2023
- Published by IWA Publishing in Water Science & Technology
- Vol. 87 (9) , 2159-2171
Occurrence and risk assessment of PAHs from athletic fields under typical rainfall events
Six polycyclic aromatic hydrocarbons (PAHs) including naphthalene (Nap), fluorene (Flu), phenanthrene (Phe), fluoranthene (Fla), pyrene (Pyr), and chrysene (Chr) were detected in runoff from five athletic fields during three rainfall events. The event mean concentration (EMC) of ∑6PAHs ranged from 3.96 to 23.23 μg/L, which was much higher than the EMC in urban traffic area runoff. Except for Nap, the PAH concentrations followed in the order of artificial turf > badminton court > basketball court > plastic runway > optennis court. The surface characteristics of the athletic fields, such as the composition of materials and roughness, played an essential role in the release of PAHs. ∑6PAHs concentration during the 2nd rainfall event (July 22nd) was the highest among the three rainfall events, indicating that high rainfall intensity facilitated the PAHs release. PAHs during three rainfall events showed little first flush effect except for the artificial turf during the 2nd (22nd July) and 3rd (29th July) rainfall events. The first flush effect could be affected by rainfall characters, PAH properties, and surface characteristics of athletic fields. Ecological risk assessment showed that PAHs in runoff corresponded to moderate-to-high risk, while health risk assessment showed that PAHs could pose a potential carcinogenic danger to human health via dermal contact.
- 27 March 2023
- Published by IWA Publishing in Water Science & Technology
- Vol. 87 (9) , 2159-2171
Open AccessOccurrence and risk assessment of PAHs from athletic fields under typical rainfall events
Six polycyclic aromatic hydrocarbons (PAHs) including naphthalene (Nap), fluorene (Flu), phenanthrene (Phe), fluoranthene (Fla), pyrene (Pyr), and chrysene (Chr) were detected in runoff from five athletic fields during three rainfall events. The event mean concentration (EMC) of ∑6PAHs ranged from 3.96 to 23.23 μg/L, which was much higher than the EMC in urban traffic area runoff. Except for Nap, the PAH concentrations followed in the order of artificial turf > badminton court > basketball court > plastic runway > optennis court. The surface characteristics of the athletic fields, such as the composition of materials and roughness, played an essential role in the release of PAHs. ∑6PAHs concentration during the 2nd rainfall event (July 22nd) was the highest among the three rainfall events, indicating that high rainfall intensity facilitated the PAHs release. PAHs during three rainfall events showed little first flush effect except for the artificial turf during the 2nd (22nd July) and 3rd (29th July) rainfall events. The first flush effect could be affected by rainfall characters, PAH properties, and surface characteristics of athletic fields. Ecological risk assessment showed that PAHs in runoff corresponded to moderate-to-high risk, while health risk assessment showed that PAHs could pose a potential carcinogenic danger to human health via dermal contact.
- 8 September 2022
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 24 (9) , 1-16
Stability of SiO2 nanoparticles with complex environmental conditions with the presence of electrolyte and NOM
- 8 September 2022
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 24 (9) , 1-16
Stability of SiO2 nanoparticles with complex environmental conditions with the presence of electrolyte and NOM
- 20 August 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (8) , 8773-8784
Removal of PAHs from aqueous solutions by adsorption using different types of waste bricks
- 20 August 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (8) , 8773-8784
Removal of PAHs from aqueous solutions by adsorption using different types of waste bricks
- 7 April 2022
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (4) , 1444-1459
Removal of runoff pollutants by construction waste bricks-based bioretention facilities
- 7 April 2022
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (4) , 1444-1459
Removal of runoff pollutants by construction waste bricks-based bioretention facilities
- 1 March 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 813, 152674
Release of microplastics from typical rainwater facilities during aging process
- 1 March 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 813, 152674
Release of microplastics from typical rainwater facilities during aging process
- Open Access
- 2 March 2021
- Published by Wiley in Journal of Chemistry
- Vol. 2021, 1-15
Distribution and Health Risk Assessment of Some Trace Elements in Runoff from Different Types of Athletic Fields
Environmental risk of heavy metals and metalloids in athletic fields has raised peoples attention in the recent years. Seven trace elements, including metals and metalloids, were detected in the runoff of five typical athletic fields in the university campus under three rainfall events. Except for Cr, the total concentrations of Zn, Pb, Cu, Mn, Cd, and As in artificial turf runoff are the highest among five athletic fields, followed by that of plastic runway. The concentration and first flush effect of trace elements are followed in the order of 1st>2nd>3rd rainfall events. The strongest correlations between metals and metalloids were observed in the tennis court runoff, while the artificial turf shows the least. The release of trace elements could be directly from the surface materials and particles on the athletic field and influenced by the comprehensive factors including surface materials, rainfall events, and pollutant characters. Pollution risk assessment shows that the pollution extent of the five types of athletic field is at least moderate and follows the order of artificial turf>basketball court>plastic runway>badminton court>tennis court. Pb shows the highest pollution level, while Cr shows the highest healthy risk. The results can provide a theoretical basis for runoff pollution control and safety use of athletic fields.
- 2 March 2021
- Published by Wiley in Journal of Chemistry
- Vol. 2021, 1-15
Open AccessDistribution and Health Risk Assessment of Some Trace Elements in Runoff from Different Types of Athletic Fields
Environmental risk of heavy metals and metalloids in athletic fields has raised peoples attention in the recent years. Seven trace elements, including metals and metalloids, were detected in the runoff of five typical athletic fields in the university campus under three rainfall events. Except for Cr, the total concentrations of Zn, Pb, Cu, Mn, Cd, and As in artificial turf runoff are the highest among five athletic fields, followed by that of plastic runway. The concentration and first flush effect of trace elements are followed in the order of 1st>2nd>3rd rainfall events. The strongest correlations between metals and metalloids were observed in the tennis court runoff, while the artificial turf shows the least. The release of trace elements could be directly from the surface materials and particles on the athletic field and influenced by the comprehensive factors including surface materials, rainfall events, and pollutant characters. Pollution risk assessment shows that the pollution extent of the five types of athletic field is at least moderate and follows the order of artificial turf>basketball court>plastic runway>badminton court>tennis court. Pb shows the highest pollution level, while Cr shows the highest healthy risk. The results can provide a theoretical basis for runoff pollution control and safety use of athletic fields.
- 7 July 2020
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 20 (9) , 3487-3501
Concentration and speciation of trace metals and metalloids from road-deposited sediments in urban and rural areas of Beijing, China
- 7 July 2020
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 20 (9) , 3487-3501
Concentration and speciation of trace metals and metalloids from road-deposited sediments in urban and rural areas of Beijing, China
- Open Access
- 10 October 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (20) , 4213
Removal of Different Kinds of Heavy Metals by Novel PPG-nZVI Beads and Their Application in Simulated Stormwater Infiltration Facility
Polyvinyl alcohol and pumice synthetized guar gum-nanoscale zerovalent iron beads (PPG-nZVI beads) were synthesized, and their adsorption towards Pb2+, Cu2+, and Zn2+ ions was evaluated. The adsorption kinetics of metal ions was well fitted by the pseudo-second-order model. The adsorption rate decreased followed in the order of Cu2+ > Pb2+ > Zn2+, consistent with the reduction potential of the ions. The sorption isotherm was well fitted by Langmuir model. The maximum adsorption capacity decreased followed in the order of Pb2+ > Cu2+ > Zn2+, which suggested that the strength of covalent bonds between the metal ions and surface functional groups substituted to the beads is one of the major factors in the adsorption process. Adsorption increased with the increase of pH and the largest sorption occurred at pH 5.5, while ionic strength did not significantly influence the adsorption process. The application of PPG-nZVI beads as filling materials in the simulated stormwater infiltration facility shows good removal efficiency in treating the contaminated water containing Pb2+, Cu2+, Zn2+, Cr6+, and Cd2+ and the removal rate was more than 65% at least. The results indicated that the PPG-nZVI beads could be applied as promising sorbents for purification of heavy metal contaminated water.
- 10 October 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (20) , 4213
Open AccessRemoval of Different Kinds of Heavy Metals by Novel PPG-nZVI Beads and Their Application in Simulated Stormwater Infiltration Facility
Polyvinyl alcohol and pumice synthetized guar gum-nanoscale zerovalent iron beads (PPG-nZVI beads) were synthesized, and their adsorption towards Pb2+, Cu2+, and Zn2+ ions was evaluated. The adsorption kinetics of metal ions was well fitted by the pseudo-second-order model. The adsorption rate decreased followed in the order of Cu2+ > Pb2+ > Zn2+, consistent with the reduction potential of the ions. The sorption isotherm was well fitted by Langmuir model. The maximum adsorption capacity decreased followed in the order of Pb2+ > Cu2+ > Zn2+, which suggested that the strength of covalent bonds between the metal ions and surface functional groups substituted to the beads is one of the major factors in the adsorption process. Adsorption increased with the increase of pH and the largest sorption occurred at pH 5.5, while ionic strength did not significantly influence the adsorption process. The application of PPG-nZVI beads as filling materials in the simulated stormwater infiltration facility shows good removal efficiency in treating the contaminated water containing Pb2+, Cu2+, Zn2+, Cr6+, and Cd2+ and the removal rate was more than 65% at least. The results indicated that the PPG-nZVI beads could be applied as promising sorbents for purification of heavy metal contaminated water.
- Open Access
- 15 February 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (4) , 670
A Study on the Removal of Copper (II) from Aqueous Solution Using Lime Sand Bricks
Heavy metals such as Cu(II), if ubiquitous in the runoff, can have adverse effects on the environment and human health. Lime sand bricks, as low-cost adsorbents to be potentially applied in stormwater infiltration facilities, were systematically investigated for Cu(II) removal from water using batch and column experiments. In the batch experiment, the adsorption of Cu(II) to bricks reach an equilibrium within 7 h and the kinetic data fits well with the pseudo-second-order model. The sorption isotherm can be described by both the Freundlich and Langmuir model and the maximum adsorption capacity of the bricks is 7 ± 1 mg/g. In the column experiment, the best removal efficiency for Cu(II) was observed at a filler thickness of 20 cm, service time of 12 min with a Cu(II) concentration of 0.5 mg/L. The Cu(II) removal rate increases with the increasing bed depth and residence time. The inlet concentration and residence time had significant effects on the Cu(II) removal analyzed by the Box–Behnken design (BBD). The Adams-Bohart model was in good agreement with the experimental data in representing the breakthrough curve. Copper fractions in the bricks descend in the order of organic matter fraction > Fe-Mn oxides fraction > carbonates fraction > residual fraction > exchangeable fraction, indicating that the lime sand bricks after copper adsorption reduce the long-term ecotoxicity and bioavailability to the environment.
- 15 February 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (4) , 670
Open AccessA Study on the Removal of Copper (II) from Aqueous Solution Using Lime Sand Bricks
Heavy metals such as Cu(II), if ubiquitous in the runoff, can have adverse effects on the environment and human health. Lime sand bricks, as low-cost adsorbents to be potentially applied in stormwater infiltration facilities, were systematically investigated for Cu(II) removal from water using batch and column experiments. In the batch experiment, the adsorption of Cu(II) to bricks reach an equilibrium within 7 h and the kinetic data fits well with the pseudo-second-order model. The sorption isotherm can be described by both the Freundlich and Langmuir model and the maximum adsorption capacity of the bricks is 7 ± 1 mg/g. In the column experiment, the best removal efficiency for Cu(II) was observed at a filler thickness of 20 cm, service time of 12 min with a Cu(II) concentration of 0.5 mg/L. The Cu(II) removal rate increases with the increasing bed depth and residence time. The inlet concentration and residence time had significant effects on the Cu(II) removal analyzed by the Box–Behnken design (BBD). The Adams-Bohart model was in good agreement with the experimental data in representing the breakthrough curve. Copper fractions in the bricks descend in the order of organic matter fraction > Fe-Mn oxides fraction > carbonates fraction > residual fraction > exchangeable fraction, indicating that the lime sand bricks after copper adsorption reduce the long-term ecotoxicity and bioavailability to the environment.