Obiora Samuel Agu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Obiora Samuel Agu has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Lope G. Tabil
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK, S7N 5A9, Canada
6 shared publications - Edmund Mupondwa
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
4 shared publications - Bagher Emadi
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
2 shared publications Edmund Mupondwa
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK, S7N 5A9, Canada; Bioproducts and Bioprocesses, Science and Technology Branch, Agriculture and Agri-Food Canada, Government of Canada, Saskatoon Research and Development Center, 107 Science Place, Saskatoon, SK, S7N 0X2, Canada
2 shared publicationsBagher Emadi
1 shared publication- Bagher Emadi1 shared publication
Latest Publications
- 16 March 2026
- Published by Elsevier in Science of The Total Environment
- Vol. 1026, 181699
Life cycle assessment of microwave torrefaction and pellet production from agri-forest residues
- 16 March 2026
- Published by Elsevier in Science of The Total Environment
- Vol. 1026, 181699
Life cycle assessment of microwave torrefaction and pellet production from agri-forest residues
- 24 November 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 206
Technoeconomic analysis of microwave torrefaction of biomass with microwave absorber and pelletization
- 24 November 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 206
Technoeconomic analysis of microwave torrefaction of biomass with microwave absorber and pelletization
- Open Access
Grindability of Torrefied Camelina Straw and Microparticle Evaluation by Confocal Laser Scanning Microscopy for Use as Biofuel
This study examined the combined effect of torrefaction and microwave absorbers on improving biomass thermochemical characteristics and grindability for heat, power, and value-added products. Camelina straw in two grinds, ground (6.4 mm screen size) and chopped with biochar addition (0%, 10% and 20%), was torrefied in a bench-scale microwave reactor at torrefaction temperatures of 250 °C and 300 °C with residence times of 10, 15 and 20 min under inert conditions and nitrogen-activated. After torrefaction, the geometric mean particle and size distribution, moisture content, ash content, bulk and particle densities were determined, and the grinding performance values of torrefied ground and chopped with and without biochar were determined and compared with the raw camelina straw. The results showed that the geometric diameter decreased after torrefaction in both grinds. The specific energy required for grinding torrefied biomass decreased significantly with biochar addition, longer residence times, and increased torrefaction temperatures. Torrefied ground camelina straw with biochar after grinding had the lowest grinding energy of 34.30 kJ at 300 °C/20 min. The surface morphology by confocal laser scanning microscopy of torrefied camelina straw particles indicated that biochar addition (>10%) and a torrefaction temperature at 250 °C can create profound surface distortion, and beyond 300 °C, colossal surface damage and carbonized weight fractions were produced.
Open AccessGrindability of Torrefied Camelina Straw and Microparticle Evaluation by Confocal Laser Scanning Microscopy for Use as Biofuel
This study examined the combined effect of torrefaction and microwave absorbers on improving biomass thermochemical characteristics and grindability for heat, power, and value-added products. Camelina straw in two grinds, ground (6.4 mm screen size) and chopped with biochar addition (0%, 10% and 20%), was torrefied in a bench-scale microwave reactor at torrefaction temperatures of 250 °C and 300 °C with residence times of 10, 15 and 20 min under inert conditions and nitrogen-activated. After torrefaction, the geometric mean particle and size distribution, moisture content, ash content, bulk and particle densities were determined, and the grinding performance values of torrefied ground and chopped with and without biochar were determined and compared with the raw camelina straw. The results showed that the geometric diameter decreased after torrefaction in both grinds. The specific energy required for grinding torrefied biomass decreased significantly with biochar addition, longer residence times, and increased torrefaction temperatures. Torrefied ground camelina straw with biochar after grinding had the lowest grinding energy of 34.30 kJ at 300 °C/20 min. The surface morphology by confocal laser scanning microscopy of torrefied camelina straw particles indicated that biochar addition (>10%) and a torrefaction temperature at 250 °C can create profound surface distortion, and beyond 300 °C, colossal surface damage and carbonized weight fractions were produced.
- Open Access
Actualization and Adoption of Renewable Energy Usage in Remote Communities in Canada by 2050: A Review
Remote community initiatives for renewable energy are rapidly emerging across Canada but with varying numbers, success rates, and strategies. To meet low-carbon transition goals, the need to coordinate technology deployment and long-term policy to guide the adoption is critical. Renewable resources such as wind, solar, hydro, and biomass can provide energy at a subsidized cost, create sustainable infrastructure, and provide new economic viability in social value integration. The renewable energy transition is crucial to Canada in sustaining remote and indigenous communities by providing local, clean, and low-carbon-emission energy for heat, power, and possibly transportation. This paper identified 635 renewable resources projects deployed to improve and increase electricity supply. To an extent, balancing demand within the remote and indigenous communities of Canada and highlighting sustainable renewable energy development through ownership participation within the communities is achievable before 2050 and beyond through energy efficiency and the social value of energy. The article identifies clean energy targets as mandated by the different provinces in Canada to reach net-zero GHG emissions.
Open AccessActualization and Adoption of Renewable Energy Usage in Remote Communities in Canada by 2050: A Review
Remote community initiatives for renewable energy are rapidly emerging across Canada but with varying numbers, success rates, and strategies. To meet low-carbon transition goals, the need to coordinate technology deployment and long-term policy to guide the adoption is critical. Renewable resources such as wind, solar, hydro, and biomass can provide energy at a subsidized cost, create sustainable infrastructure, and provide new economic viability in social value integration. The renewable energy transition is crucial to Canada in sustaining remote and indigenous communities by providing local, clean, and low-carbon-emission energy for heat, power, and possibly transportation. This paper identified 635 renewable resources projects deployed to improve and increase electricity supply. To an extent, balancing demand within the remote and indigenous communities of Canada and highlighting sustainable renewable energy development through ownership participation within the communities is achievable before 2050 and beyond through energy efficiency and the social value of energy. The article identifies clean energy targets as mandated by the different provinces in Canada to reach net-zero GHG emissions.
- Open Access
Impact of Biochar Addition in Microwave Torrefaction of Camelina Straw and Switchgrass for Biofuel Production
The possibility of applying biochar in mild torrefaction treatment to improve the thermochemical characteristics of ground biomass was the focus of the study. Camelina straw and switchgrass were torrefied in a reactor using microwave irradiation at torrefaction temperatures of 250 °C and 300 °C with residence times 10, 15 and 20 min, under nitrogen-activated inert conditions. Both biochar addition of more than 10% and residence time significantly affected the product yields, as MW torrefaction temperatures shifted from 250 °C to 300 °C. Overall, the results indicated a slight increase in ash content, mass loss percentage intensification, heating values, and fixed carbon, while moisture content and volatile matter decreased in camelina straw and switchgrass, with or without biochar. Biochar addition with a long residence time (20 min) at 250 °C reduced energy requirement during the microwave torrefaction process. The combustion index values showed that torrefied camelina straw or switchgrass with biochar addition suits co-combustion with coal in a coal-fired plant and is a potential biomaterial for biofuel pellets.
Open AccessImpact of Biochar Addition in Microwave Torrefaction of Camelina Straw and Switchgrass for Biofuel Production
The possibility of applying biochar in mild torrefaction treatment to improve the thermochemical characteristics of ground biomass was the focus of the study. Camelina straw and switchgrass were torrefied in a reactor using microwave irradiation at torrefaction temperatures of 250 °C and 300 °C with residence times 10, 15 and 20 min, under nitrogen-activated inert conditions. Both biochar addition of more than 10% and residence time significantly affected the product yields, as MW torrefaction temperatures shifted from 250 °C to 300 °C. Overall, the results indicated a slight increase in ash content, mass loss percentage intensification, heating values, and fixed carbon, while moisture content and volatile matter decreased in camelina straw and switchgrass, with or without biochar. Biochar addition with a long residence time (20 min) at 250 °C reduced energy requirement during the microwave torrefaction process. The combustion index values showed that torrefied camelina straw or switchgrass with biochar addition suits co-combustion with coal in a coal-fired plant and is a potential biomaterial for biofuel pellets.
- Open Access
- 16 March 2022
- Published by IntechOpen
Enzymatic Saccharification of Canola Straw and Oat Hull Subjected to Microwave-Assisted Alkali Pretreatment
Pretreatment of lignocellulosic biomass is a critical step in removing substrate-specific barriers to the cellulolytic enzyme attack. The study compared the effectiveness of microwave-assisted alkali pretreatment and alkali treatment in the enzymatic saccharification of canola straw and oat hull. Microwave pretreatments were employed by immersing the biomass in dilute alkali solutions (NaOH and KOH) at concentrations of 0, 0.75, and 1.5% (w/v) for microwave-assisted heating times of 6, 12, and 18 min. Alkali treatments were carried out using the same procedure but by soaking and without microwave heating. The highest glucose yields after enzymatic saccharification of both canola straw and oat hull were obtained when these feedstocks were ground using 1.6 mm hammer mill screen size and subjected to microwave-assisted alkali pretreatment using 1.5% and 0.75% NaOH for 18 min, respectively. SEM analysis indicated a more significant modification in the structure of biomass samples subjected to microwave-assisted alkali pretreatment compared to untreated and alkali-treated biomass samples. Results indicated that microwave-assisted alkali pretreatment with short residence time is effective in improving the glucose yield of canola straw and oat hull during enzymatic saccharification.
- 16 March 2022
- Published by IntechOpen
Open AccessEnzymatic Saccharification of Canola Straw and Oat Hull Subjected to Microwave-Assisted Alkali Pretreatment
Pretreatment of lignocellulosic biomass is a critical step in removing substrate-specific barriers to the cellulolytic enzyme attack. The study compared the effectiveness of microwave-assisted alkali pretreatment and alkali treatment in the enzymatic saccharification of canola straw and oat hull. Microwave pretreatments were employed by immersing the biomass in dilute alkali solutions (NaOH and KOH) at concentrations of 0, 0.75, and 1.5% (w/v) for microwave-assisted heating times of 6, 12, and 18 min. Alkali treatments were carried out using the same procedure but by soaking and without microwave heating. The highest glucose yields after enzymatic saccharification of both canola straw and oat hull were obtained when these feedstocks were ground using 1.6 mm hammer mill screen size and subjected to microwave-assisted alkali pretreatment using 1.5% and 0.75% NaOH for 18 min, respectively. SEM analysis indicated a more significant modification in the structure of biomass samples subjected to microwave-assisted alkali pretreatment compared to untreated and alkali-treated biomass samples. Results indicated that microwave-assisted alkali pretreatment with short residence time is effective in improving the glucose yield of canola straw and oat hull during enzymatic saccharification.