Bagher Emadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bagher Emadi has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Edmund Mupondwa
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
3 shared publications - Lope G. Tabil
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK, S7N 5A9, Canada
3 shared publications - Obiora Samuel Agu
Department of Chemical and Biological Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada
2 shared publications - Duncan Cree
Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada
1 shared publication - Peyman Alizadeh
Chemical and Biological Engineering Department University of British Columbia Vancouver British Columbia Canada
1 shared publication - Phani Adapa
National Hydrology Research Centre, Global Institute for Water Security (GIWS), University of Saskatchewan, 11 Innovation Boulevard, Saskatoon, SK S7N 3H5, Canada
1 shared publication
Latest Publications
- Open Access
Grindability of Torrefied Camelina Straw and Microparticle Evaluation by Confocal Laser Scanning Microscopy for Use as Biofuel
This study examined the combined effect of torrefaction and microwave absorbers on improving biomass thermochemical characteristics and grindability for heat, power, and value-added products. Camelina straw in two grinds, ground (6.4 mm screen size) and chopped with biochar addition (0%, 10% and 20%), was torrefied in a bench-scale microwave reactor at torrefaction temperatures of 250 °C and 300 °C with residence times of 10, 15 and 20 min under inert conditions and nitrogen-activated. After torrefaction, the geometric mean particle and size distribution, moisture content, ash content, bulk and particle densities were determined, and the grinding performance values of torrefied ground and chopped with and without biochar were determined and compared with the raw camelina straw. The results showed that the geometric diameter decreased after torrefaction in both grinds. The specific energy required for grinding torrefied biomass decreased significantly with biochar addition, longer residence times, and increased torrefaction temperatures. Torrefied ground camelina straw with biochar after grinding had the lowest grinding energy of 34.30 kJ at 300 °C/20 min. The surface morphology by confocal laser scanning microscopy of torrefied camelina straw particles indicated that biochar addition (>10%) and a torrefaction temperature at 250 °C can create profound surface distortion, and beyond 300 °C, colossal surface damage and carbonized weight fractions were produced.
Open AccessGrindability of Torrefied Camelina Straw and Microparticle Evaluation by Confocal Laser Scanning Microscopy for Use as Biofuel
This study examined the combined effect of torrefaction and microwave absorbers on improving biomass thermochemical characteristics and grindability for heat, power, and value-added products. Camelina straw in two grinds, ground (6.4 mm screen size) and chopped with biochar addition (0%, 10% and 20%), was torrefied in a bench-scale microwave reactor at torrefaction temperatures of 250 °C and 300 °C with residence times of 10, 15 and 20 min under inert conditions and nitrogen-activated. After torrefaction, the geometric mean particle and size distribution, moisture content, ash content, bulk and particle densities were determined, and the grinding performance values of torrefied ground and chopped with and without biochar were determined and compared with the raw camelina straw. The results showed that the geometric diameter decreased after torrefaction in both grinds. The specific energy required for grinding torrefied biomass decreased significantly with biochar addition, longer residence times, and increased torrefaction temperatures. Torrefied ground camelina straw with biochar after grinding had the lowest grinding energy of 34.30 kJ at 300 °C/20 min. The surface morphology by confocal laser scanning microscopy of torrefied camelina straw particles indicated that biochar addition (>10%) and a torrefaction temperature at 250 °C can create profound surface distortion, and beyond 300 °C, colossal surface damage and carbonized weight fractions were produced.
- Open Access
Impact of Biochar Addition in Microwave Torrefaction of Camelina Straw and Switchgrass for Biofuel Production
The possibility of applying biochar in mild torrefaction treatment to improve the thermochemical characteristics of ground biomass was the focus of the study. Camelina straw and switchgrass were torrefied in a reactor using microwave irradiation at torrefaction temperatures of 250 °C and 300 °C with residence times 10, 15 and 20 min, under nitrogen-activated inert conditions. Both biochar addition of more than 10% and residence time significantly affected the product yields, as MW torrefaction temperatures shifted from 250 °C to 300 °C. Overall, the results indicated a slight increase in ash content, mass loss percentage intensification, heating values, and fixed carbon, while moisture content and volatile matter decreased in camelina straw and switchgrass, with or without biochar. Biochar addition with a long residence time (20 min) at 250 °C reduced energy requirement during the microwave torrefaction process. The combustion index values showed that torrefied camelina straw or switchgrass with biochar addition suits co-combustion with coal in a coal-fired plant and is a potential biomaterial for biofuel pellets.
Open AccessImpact of Biochar Addition in Microwave Torrefaction of Camelina Straw and Switchgrass for Biofuel Production
The possibility of applying biochar in mild torrefaction treatment to improve the thermochemical characteristics of ground biomass was the focus of the study. Camelina straw and switchgrass were torrefied in a reactor using microwave irradiation at torrefaction temperatures of 250 °C and 300 °C with residence times 10, 15 and 20 min, under nitrogen-activated inert conditions. Both biochar addition of more than 10% and residence time significantly affected the product yields, as MW torrefaction temperatures shifted from 250 °C to 300 °C. Overall, the results indicated a slight increase in ash content, mass loss percentage intensification, heating values, and fixed carbon, while moisture content and volatile matter decreased in camelina straw and switchgrass, with or without biochar. Biochar addition with a long residence time (20 min) at 250 °C reduced energy requirement during the microwave torrefaction process. The combustion index values showed that torrefied camelina straw or switchgrass with biochar addition suits co-combustion with coal in a coal-fired plant and is a potential biomaterial for biofuel pellets.
- Open Access
Torrefaction and Densification of Wood Sawdust for Bioenergy Applications
In this study, wood sawdust as waste residue from wood processing mills was pretreated using torrefaction to improve fuel properties and densified to facilitate transportation. Sawdust was torrefied in a fixed bed reactor using inside temperatures (IT) of 230, 260 and 290 °C for 15, 30 and 45 min, residence time. Due to the low calorific value of the treatments, the outside temperature (OT) of the fixed bed reactor was used instead for a fixed duration of 45 min, which resulted in an increase in energy value by 40% for the most severe conditions. The mechanical strength of the pellets was enhanced by adding 20% binder (steam-treated spruce sawdust) to biochar, which improved the pellet tensile strength by 50%. Liquid by-products from the torrefaction process contained furfural and acetic acid, which can be separated for commercial uses. Thermochemical analysis showed better fuel properties of OT torrefied samples such as high fixed carbon (52%), low volatiles (41%) and lower oxygen contents (27%) compared to IT torrefied samples (18, 77 and 43%, respectively). Low moisture uptake of torrefied pellets compared to raw pellets, along with other attributes such as renewability, make them competent substitutes to fossil-based energy carriers such as coal.
Open AccessTorrefaction and Densification of Wood Sawdust for Bioenergy Applications
In this study, wood sawdust as waste residue from wood processing mills was pretreated using torrefaction to improve fuel properties and densified to facilitate transportation. Sawdust was torrefied in a fixed bed reactor using inside temperatures (IT) of 230, 260 and 290 °C for 15, 30 and 45 min, residence time. Due to the low calorific value of the treatments, the outside temperature (OT) of the fixed bed reactor was used instead for a fixed duration of 45 min, which resulted in an increase in energy value by 40% for the most severe conditions. The mechanical strength of the pellets was enhanced by adding 20% binder (steam-treated spruce sawdust) to biochar, which improved the pellet tensile strength by 50%. Liquid by-products from the torrefaction process contained furfural and acetic acid, which can be separated for commercial uses. Thermochemical analysis showed better fuel properties of OT torrefied samples such as high fixed carbon (52%), low volatiles (41%) and lower oxygen contents (27%) compared to IT torrefied samples (18, 77 and 43%, respectively). Low moisture uptake of torrefied pellets compared to raw pellets, along with other attributes such as renewability, make them competent substitutes to fossil-based energy carriers such as coal.