Vadim V. Verbov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vadim V. Verbov has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Oleksii S. Nekhlopochyn
Romodanov Neurosurgery Institute, Kyiv, Ukraine
43 shared publications - Ievgen V. Cheshuk
Romodanov Neurosurgery Institute, Kyiv, Ukraine
32 shared publications - Michael Yu. Karpinsky
Sytenko Institute of Spine and Joint Pathology of NAMSU, Kharkiv, Ukraine
15 shared publications - Oleksandr V. Yaresko
Sytenko Institute of Spine and Joint Pathology of NAMSU, Kharkiv, Ukraine
15 shared publications - Milan V. Vorodi
Restorative Neurosurgery Department, Romodanov Neurosurgery Institute, Kyiv
14 shared publications - Ievgenii I. Slynko
Інститут нейрохірургії ім. акад. А.П. Ромоданова НАМН України, Київ
4 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 27 (5) , 465-481
Vertical load distribution between the support structures and regional annulus fibrosus stress patterns in the cervical spine during flexion and extension: a finite element study
Background. Degenerative cervical spine disorders are one of leading causes of chronic pain and neurological deficit. Altered load distribution between the anterior and posterior support structures is considered an important biomechanical factor in their development. Quantifying load distribution in the intact spine is necessary to study degeneration and plan interventions with minimal impact on adjacent segments. The purpose was to assess load distribution between the discs, joints, and ligaments from C2-C3 to C6-C7 during flexion and extension, and to compare intradiscal pressure with the stress state of annulus fibrosus sectors. Materials and methods. A finite-element C0-Th1 cervical spine model was built from computed tomography data. A vertical 50 N force representing head weight was applied to the occiput while motion from +54.9° flexion to –44.5° extension was prescribed (176 states). Load distribution was determined using a free-body diagram, and the annulus fibrosus was analyzed by sectors. Results. In the loaded neutral position, the discs transmitted from 39 % of the external load at C4-C5 to 77 % at C6-C7, whereas the facet joints transmitted 28–57 %. The facet path dominated at C4-C5, while disc transmission dominated at C2-C3 throughout the range. Intradiscal pressure was 0.147–0.294 MPa. During flexion, the facets disengaged, and tension in the posterior ligamentous complex produced an opposing reaction; consequently, the vertical component of disc-transmitted force reached approximately twice the external load: the pressure rose to 0.940 MPa at C5-C6. During extension, the facets carried most of the load at the mid- and lower-cervical levels. Peak contact pressure increased three- to fivefold and reached 10.62 MPa at C3-C4. The horizontal contact-force component was –124.2 N, directed posteriorly, and reflected substantial shear. At C5-C6, relatively low intradiscal pressure coincided with an increase in equivalent stress to 8.2 MPa and tensile maximum principal stress in the anterior annulus sector. The global model response was consistent with published data: C2-C7 range of motion was 59.1°, and the maximum reaction moment was 2.42 N · m. Conclusions. Load distribution between the support structures depends on head position and segmental level. These data may provide a reference for assessing the effects of degenerative changes and surgeries. Intradiscal pressure does not fully characterize the state of peripheral annulus and should be supplemented by equivalent and principal stress analysis.
- 22 October 2026
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 27 (5) , 465-481
Open AccessVertical load distribution between the support structures and regional annulus fibrosus stress patterns in the cervical spine during flexion and extension: a finite element study
Background. Degenerative cervical spine disorders are one of leading causes of chronic pain and neurological deficit. Altered load distribution between the anterior and posterior support structures is considered an important biomechanical factor in their development. Quantifying load distribution in the intact spine is necessary to study degeneration and plan interventions with minimal impact on adjacent segments. The purpose was to assess load distribution between the discs, joints, and ligaments from C2-C3 to C6-C7 during flexion and extension, and to compare intradiscal pressure with the stress state of annulus fibrosus sectors. Materials and methods. A finite-element C0-Th1 cervical spine model was built from computed tomography data. A vertical 50 N force representing head weight was applied to the occiput while motion from +54.9° flexion to –44.5° extension was prescribed (176 states). Load distribution was determined using a free-body diagram, and the annulus fibrosus was analyzed by sectors. Results. In the loaded neutral position, the discs transmitted from 39 % of the external load at C4-C5 to 77 % at C6-C7, whereas the facet joints transmitted 28–57 %. The facet path dominated at C4-C5, while disc transmission dominated at C2-C3 throughout the range. Intradiscal pressure was 0.147–0.294 MPa. During flexion, the facets disengaged, and tension in the posterior ligamentous complex produced an opposing reaction; consequently, the vertical component of disc-transmitted force reached approximately twice the external load: the pressure rose to 0.940 MPa at C5-C6. During extension, the facets carried most of the load at the mid- and lower-cervical levels. Peak contact pressure increased three- to fivefold and reached 10.62 MPa at C3-C4. The horizontal contact-force component was –124.2 N, directed posteriorly, and reflected substantial shear. At C5-C6, relatively low intradiscal pressure coincided with an increase in equivalent stress to 8.2 MPa and tensile maximum principal stress in the anterior annulus sector. The global model response was consistent with published data: C2-C7 range of motion was 59.1°, and the maximum reaction moment was 2.42 N · m. Conclusions. Load distribution between the support structures depends on head position and segmental level. These data may provide a reference for assessing the effects of degenerative changes and surgeries. Intradiscal pressure does not fully characterize the state of peripheral annulus and should be supplemented by equivalent and principal stress analysis.
- Open Access
- 8 August 2026
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 27 (4) , 388-401
Morphofunctional stratification of type A injuries of the thoracolumbar junction: CT morphometric morphotypes and an algorithm for treatment decision-making
Background. The choice of treatment strategy for type A injuries of the thoracolumbar junction (T11-L2) remains controversial. The AO Spine classification describes injury morphology and serves as an international language for communication; however, it is insufficient for individualized selection of a specific intervention, especially in complex reconstructive scenarios. This supports the identification of intratype quantitative morphotypes and the development of an individualized treatment algorithm. The purpose was to perform morphofunctional stratification of type A thoracolumbar junction injuries by identifying CT morphometric morphotypes that reflect the relationship between local fracture morphology and the deformation response of the spinal segment, as well as to develop an algorithm in which the morphotype formalizes the baseline tactical scenario, while quantitative threshold values modify it. Materials and methods. Morphotypes were identified using CT morphometric parameters (CA, GA, A/P ratio, AVH ratio, AED, PED, and HU) with k-means clustering and Gaussian mixture model; HU was used as a modifier of bone quality. Clustering was assessed using silhouette, BIC, and clinical interpretability. Differences were evaluated using the Kruskal-Wallis/Mann-Whitney tests and test; discriminatory ability was assessed by ROC analysis, and the association with outcome was evaluated using odds ratios. The algorithm was constructed according to the principle “AO Spine type morphotype baseline treatment strategy quantitative modifiers”. Results. Within A1-A2 injuries, three morphotypes were identified: compensated, subcompensated, and decompensated, reflecting a gradient of anterior support loss. Within A3-A4 injuries, two morphotypes were identified: kyphotic-deformational and compression-retropulsion. The morphotype was closely associated with the implemented treatment strategy: in A1-A2 injuries, there was a transition from observation to cementoplasty and short-segment transpedicular fixation (TPF); in A3-A4 injuries, the choice was between long-segment TPF and decompression with fixation. Threshold values, including CA > 14°/GA > 25° for construct length, level-dependent canal stenosis thresholds of 35/45/55 % for open versus indirect decompression, and HU < 150 as an argument for augmentation, refined the baseline decision. The kyphotic-deformational A3-A4 morphotype was treated with long-segment TPF in all 40 cases, whereas treatment of the compression-retropulsion morphotype was variable. Conclusions. The morphotype may be used as a quantitative clinical and tactical refinement of the AO Spine subtype: AO Spine defines the morphological axis, the morphotype provides the level for baseline decision-making, while ASIA grade, posterior ligamentous complex, and bone quality remain mandatory modifiers. The proposed algorithm is a derivation model and requires prospective validation.
- 8 August 2026
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 27 (4) , 388-401
Open AccessMorphofunctional stratification of type A injuries of the thoracolumbar junction: CT morphometric morphotypes and an algorithm for treatment decision-making
Background. The choice of treatment strategy for type A injuries of the thoracolumbar junction (T11-L2) remains controversial. The AO Spine classification describes injury morphology and serves as an international language for communication; however, it is insufficient for individualized selection of a specific intervention, especially in complex reconstructive scenarios. This supports the identification of intratype quantitative morphotypes and the development of an individualized treatment algorithm. The purpose was to perform morphofunctional stratification of type A thoracolumbar junction injuries by identifying CT morphometric morphotypes that reflect the relationship between local fracture morphology and the deformation response of the spinal segment, as well as to develop an algorithm in which the morphotype formalizes the baseline tactical scenario, while quantitative threshold values modify it. Materials and methods. Morphotypes were identified using CT morphometric parameters (CA, GA, A/P ratio, AVH ratio, AED, PED, and HU) with k-means clustering and Gaussian mixture model; HU was used as a modifier of bone quality. Clustering was assessed using silhouette, BIC, and clinical interpretability. Differences were evaluated using the Kruskal-Wallis/Mann-Whitney tests and test; discriminatory ability was assessed by ROC analysis, and the association with outcome was evaluated using odds ratios. The algorithm was constructed according to the principle “AO Spine type morphotype baseline treatment strategy quantitative modifiers”. Results. Within A1-A2 injuries, three morphotypes were identified: compensated, subcompensated, and decompensated, reflecting a gradient of anterior support loss. Within A3-A4 injuries, two morphotypes were identified: kyphotic-deformational and compression-retropulsion. The morphotype was closely associated with the implemented treatment strategy: in A1-A2 injuries, there was a transition from observation to cementoplasty and short-segment transpedicular fixation (TPF); in A3-A4 injuries, the choice was between long-segment TPF and decompression with fixation. Threshold values, including CA > 14°/GA > 25° for construct length, level-dependent canal stenosis thresholds of 35/45/55 % for open versus indirect decompression, and HU < 150 as an argument for augmentation, refined the baseline decision. The kyphotic-deformational A3-A4 morphotype was treated with long-segment TPF in all 40 cases, whereas treatment of the compression-retropulsion morphotype was variable. Conclusions. The morphotype may be used as a quantitative clinical and tactical refinement of the AO Spine subtype: AO Spine defines the morphological axis, the morphotype provides the level for baseline decision-making, while ASIA grade, posterior ligamentous complex, and bone quality remain mandatory modifiers. The proposed algorithm is a derivation model and requires prospective validation.
- Open Access
- 22 April 2026
- Published by Publishing House Zaslavsky in INTERNATIONAL NEUROLOGICAL JOURNAL
- Vol. 22 (2) , 63-71
Neurological recovery after traumatic thoracolumbar junction injuries: the role of the admission AIS grade and CT morphometric parameters
Background. The thoracolumbar junction is the most common site of spinal trauma (about half of all spinal injuries), and accompanying neurological deficit strongly affects functional outcome and quality of life. Yet the factors governing recovery of this deficit remain poorly defined, and the prognostic value of morphometry relative to the initial neurological severity is debated. Objective: to determine independent predictors of deficit regression 12 months after thoracolumbar junction injury, focusing on the admission AIS grade and morphometry. Materials and methods. This observational study analysed 240 patients with a thoracolumbar junction injury (Th11-L2), a baseline deficit (AIS A-D), and 12-month follow-up. We classified injuries with the AO Spine system and neurological status with the ISNCSCI. The analysis used Spearman correlation, the Fisher exact test, and multivariable logistic regression. Results. At least one-grade improvement on AIS occurred in 122 (50.8 %) patients and improvement of two grades or more in 10 (4.2 %; 5.8 % among patients with a baseline A-C grade). The rate of ≥ 1 grade regression did not depend on injury type (p = 0.498) but rose as the baseline deficit became milder, from 41.8 % in grade A to 60.9 % in grade D ( = 0.165; p = 0.011). Substantial regression (two grades or more) predominated in type C injuries (20.7 versus 2.8 %; odds ratio 9.0; p = 0.0019); this finding is exploratory. Morphometric parameters correlated with the admission AIS grade (Cobb angle: = –0.48; posterior distraction: = –0.40; anterior wedging: = +0.36; all p < 0.001) but not with the magnitude of later regression; moreover, the effect of posterior distraction disappeared after adjustment for the admission AIS grade. In the multivariable model, the baseline deficit severity emerged as the only independent predictor of regression (odds ratio 1.34; 95 % confidence interval 1.04–1.73; p = 0.026); injury type, age, the injury-to-surgery interval, injury energy, and bone density did not have an independent effect on the likelihood of regression. A sensitivity analysis confirmed the same direction of effect. Consequently, the model showed limited discrimination (area under the ROC curve 0.612). Conclusions. Neurological recovery is common but rarely exceeds one AIS grade. Admission neurological severity is the main independent determinant of regression, whereas morphometry showed no convincing added prognostic value beyond the admission AIS grade. The higher proportion of substantial regression in type C warrants confirmation.
- 22 April 2026
- Published by Publishing House Zaslavsky in INTERNATIONAL NEUROLOGICAL JOURNAL
- Vol. 22 (2) , 63-71
Open AccessNeurological recovery after traumatic thoracolumbar junction injuries: the role of the admission AIS grade and CT morphometric parameters
Background. The thoracolumbar junction is the most common site of spinal trauma (about half of all spinal injuries), and accompanying neurological deficit strongly affects functional outcome and quality of life. Yet the factors governing recovery of this deficit remain poorly defined, and the prognostic value of morphometry relative to the initial neurological severity is debated. Objective: to determine independent predictors of deficit regression 12 months after thoracolumbar junction injury, focusing on the admission AIS grade and morphometry. Materials and methods. This observational study analysed 240 patients with a thoracolumbar junction injury (Th11-L2), a baseline deficit (AIS A-D), and 12-month follow-up. We classified injuries with the AO Spine system and neurological status with the ISNCSCI. The analysis used Spearman correlation, the Fisher exact test, and multivariable logistic regression. Results. At least one-grade improvement on AIS occurred in 122 (50.8 %) patients and improvement of two grades or more in 10 (4.2 %; 5.8 % among patients with a baseline A-C grade). The rate of ≥ 1 grade regression did not depend on injury type (p = 0.498) but rose as the baseline deficit became milder, from 41.8 % in grade A to 60.9 % in grade D ( = 0.165; p = 0.011). Substantial regression (two grades or more) predominated in type C injuries (20.7 versus 2.8 %; odds ratio 9.0; p = 0.0019); this finding is exploratory. Morphometric parameters correlated with the admission AIS grade (Cobb angle: = –0.48; posterior distraction: = –0.40; anterior wedging: = +0.36; all p < 0.001) but not with the magnitude of later regression; moreover, the effect of posterior distraction disappeared after adjustment for the admission AIS grade. In the multivariable model, the baseline deficit severity emerged as the only independent predictor of regression (odds ratio 1.34; 95 % confidence interval 1.04–1.73; p = 0.026); injury type, age, the injury-to-surgery interval, injury energy, and bone density did not have an independent effect on the likelihood of regression. A sensitivity analysis confirmed the same direction of effect. Consequently, the model showed limited discrimination (area under the ROC curve 0.612). Conclusions. Neurological recovery is common but rarely exceeds one AIS grade. Admission neurological severity is the main independent determinant of regression, whereas morphometry showed no convincing added prognostic value beyond the admission AIS grade. The higher proportion of substantial regression in type C warrants confirmation.
- Open Access
- 29 March 2026
- Published by Romodanov Neurosurgery Institute in Ukrainian Neurosurgical Journal
- Vol. 32 (1) , 69-91
Development and validation of a multilevel scale for quantitative assessment of mechanical exposure in traumatic spinal injuries
Objective: To develop, theoretically substantiate, and perform primary validation of a multilevel (0–10 points) scale for quantitative assessment of the intensity of external mechanical impact in traumatic spinal injuries. Materials and methods: The study design followed the COSMIN (Consensus-based Standards for the Selection of Health Measurement Instruments) principles for developing and validating medical measurement tools, ensuring an adequate level of scientific validity and reproducibility. A literature review (PubMed, Scopus, Web of Science, 1990–2025) enabled the identification of threshold values and modifying factors, including patient body mass, the transmission coefficient of impulse (Tland))), and the effective deceleration distance (Sland). Two datasets were used for validation: 40 standardized clinical vignettes and 52 real cases of thoracolumbar junction trauma (Th11–L2) with mandatory verification by computed tomography/magnetic resonance imaging. Construct and criterion validity, inter-rater reliability (ICC, κ), absolute reliability (SEM, MDC95), diagnostic accuracy (ROC analysis), agreement level (Bland–Altman), and threshold stability were assessed. Results: Based on comparative analysis of various approaches, the concept of “equivalent fall height” was proposed as a universal criterion of mechanical exposure in spinal trauma. An 11-level (0–10) quantitative scale and a spine-oriented derived metric were developed. Primary validation demonstrated high inter-rater agreement (ICC(2,1): 0.84 for the basic indicator and 0.79 for the spinal-oriented one; ICC(2,k): 0.95 and 0.92), acceptable absolute precision (SEM 0.80–0.95; MDC95 2.2–2.6 points), and stable thresholds (discrepancies exceeding ±1 level occurred in <7% of cases). The metrics showed significant associations with vertebral body wedge deformity (r=0.58), spinal canal compromise (r=0.49), and ordinal injury severity by AO Spine (ρ=0.62; p<0.001). In logistic modeling, each additional 1 m in equivalent fall height nearly doubled the odds of burst/unstable injuries (OR=1.85; 95% CI 1.45–2.38). The diagnostic performance of the scale was confirmed (AUC=0.82) for identifying vertebral fractures (optimal threshold ≈1.3 m; sensitivity – 0.76; specificity – 0.72). Conclusions: The proposed scale provides a quantitative, mass-neutral, and clinically interpretable measure of the “event severity,” complements morphological classifications, enhances risk stratification, and can be applied for patient triage, diagnostic planning, and multicenter research.
- 29 March 2026
- Published by Romodanov Neurosurgery Institute in Ukrainian Neurosurgical Journal
- Vol. 32 (1) , 69-91
Open AccessDevelopment and validation of a multilevel scale for quantitative assessment of mechanical exposure in traumatic spinal injuries
Objective: To develop, theoretically substantiate, and perform primary validation of a multilevel (0–10 points) scale for quantitative assessment of the intensity of external mechanical impact in traumatic spinal injuries. Materials and methods: The study design followed the COSMIN (Consensus-based Standards for the Selection of Health Measurement Instruments) principles for developing and validating medical measurement tools, ensuring an adequate level of scientific validity and reproducibility. A literature review (PubMed, Scopus, Web of Science, 1990–2025) enabled the identification of threshold values and modifying factors, including patient body mass, the transmission coefficient of impulse (Tland))), and the effective deceleration distance (Sland). Two datasets were used for validation: 40 standardized clinical vignettes and 52 real cases of thoracolumbar junction trauma (Th11–L2) with mandatory verification by computed tomography/magnetic resonance imaging. Construct and criterion validity, inter-rater reliability (ICC, κ), absolute reliability (SEM, MDC95), diagnostic accuracy (ROC analysis), agreement level (Bland–Altman), and threshold stability were assessed. Results: Based on comparative analysis of various approaches, the concept of “equivalent fall height” was proposed as a universal criterion of mechanical exposure in spinal trauma. An 11-level (0–10) quantitative scale and a spine-oriented derived metric were developed. Primary validation demonstrated high inter-rater agreement (ICC(2,1): 0.84 for the basic indicator and 0.79 for the spinal-oriented one; ICC(2,k): 0.95 and 0.92), acceptable absolute precision (SEM 0.80–0.95; MDC95 2.2–2.6 points), and stable thresholds (discrepancies exceeding ±1 level occurred in <7% of cases). The metrics showed significant associations with vertebral body wedge deformity (r=0.58), spinal canal compromise (r=0.49), and ordinal injury severity by AO Spine (ρ=0.62; p<0.001). In logistic modeling, each additional 1 m in equivalent fall height nearly doubled the odds of burst/unstable injuries (OR=1.85; 95% CI 1.45–2.38). The diagnostic performance of the scale was confirmed (AUC=0.82) for identifying vertebral fractures (optimal threshold ≈1.3 m; sensitivity – 0.76; specificity – 0.72). Conclusions: The proposed scale provides a quantitative, mass-neutral, and clinically interpretable measure of the “event severity,” complements morphological classifications, enhances risk stratification, and can be applied for patient triage, diagnostic planning, and multicenter research.
- Open Access
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Applied Bionics and Biomechanics
- Vol. 10 (1) , 30-50
Factors associated with quality of life after traumatic thoracolumbar spine injury: a narrative review
Background: Traumatic thoracolumbar spine injuries are a major cause of persistent pain, functional limitation, and reduced quality of life (QoL), even in the absence of severe neurological impairment. Although numerous studies have examined individual aspects of outcome after these injuries, the determinants of long-term QoL remain fragmented across the literature. This review aimed to analyse and systematise factors associated with QoL and functional outcomes in adult patients following traumatic thoracolumbar spine injury. Methods: This study was conducted as a narrative review with a structured literature search. PubMed, Embase, and the Cochrane Library were searched using database-specific strategies focused on thoracolumbar fractures, quality of life, functional outcome, deformity, sagittal balance, and other clinically relevant sequelae. Titles, abstracts, and full texts were screened, with eligibility assessment performed independently by three reviewers and disagreements resolved by consensus. Articles published in English were considered eligible. Given the marked clinical and methodological heterogeneity of the available evidence, a quantitative meta-analysis was not performed; instead, the data were synthesised narratively. Results: A total of 154 publications were included. For analytical synthesis, all factors associated with QoL after thoracolumbar spine injury were grouped into five domains: demographic and baseline factors, clinical factors, radiological factors, treatment-related factors, and psychosocial/rehabilitation-related factors. The most consistent adverse predictors of long-term outcome were initial neurological deficit, limited neurological recovery, persistent pain, and functional disability. Additional influential factors included age, comorbidity, osteoporosis, injury severity, sagittal alignment, treatment complications, return to work, psychological status, and the broader psychosocial context. Radiological success alone did not reliably correspond to patient-perceived recovery. Surgical treatment generally provided faster short-term improvement, but its long-term superiority over conservative treatment in stable fractures without neurological deficit remained unproven. Conclusions: Quality of life after traumatic thoracolumbar spine injury is multifactorially determined and cannot be explained by any single clinical, radiological, or technical parameter. Long-term outcome reflects the interaction between injury severity, treatment effectiveness, residual symptoms, and the patient’s capacity for functional, psychological, and social adaptation. These findings support a personalised, multidisciplinary approach to treatment planning and outcome assessment, with greater emphasis on patient-reported outcomes alongside radiological and technical results.
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Applied Bionics and Biomechanics
- Vol. 10 (1) , 30-50
Open AccessFactors associated with quality of life after traumatic thoracolumbar spine injury: a narrative review
Background: Traumatic thoracolumbar spine injuries are a major cause of persistent pain, functional limitation, and reduced quality of life (QoL), even in the absence of severe neurological impairment. Although numerous studies have examined individual aspects of outcome after these injuries, the determinants of long-term QoL remain fragmented across the literature. This review aimed to analyse and systematise factors associated with QoL and functional outcomes in adult patients following traumatic thoracolumbar spine injury. Methods: This study was conducted as a narrative review with a structured literature search. PubMed, Embase, and the Cochrane Library were searched using database-specific strategies focused on thoracolumbar fractures, quality of life, functional outcome, deformity, sagittal balance, and other clinically relevant sequelae. Titles, abstracts, and full texts were screened, with eligibility assessment performed independently by three reviewers and disagreements resolved by consensus. Articles published in English were considered eligible. Given the marked clinical and methodological heterogeneity of the available evidence, a quantitative meta-analysis was not performed; instead, the data were synthesised narratively. Results: A total of 154 publications were included. For analytical synthesis, all factors associated with QoL after thoracolumbar spine injury were grouped into five domains: demographic and baseline factors, clinical factors, radiological factors, treatment-related factors, and psychosocial/rehabilitation-related factors. The most consistent adverse predictors of long-term outcome were initial neurological deficit, limited neurological recovery, persistent pain, and functional disability. Additional influential factors included age, comorbidity, osteoporosis, injury severity, sagittal alignment, treatment complications, return to work, psychological status, and the broader psychosocial context. Radiological success alone did not reliably correspond to patient-perceived recovery. Surgical treatment generally provided faster short-term improvement, but its long-term superiority over conservative treatment in stable fractures without neurological deficit remained unproven. Conclusions: Quality of life after traumatic thoracolumbar spine injury is multifactorially determined and cannot be explained by any single clinical, radiological, or technical parameter. Long-term outcome reflects the interaction between injury severity, treatment effectiveness, residual symptoms, and the patient’s capacity for functional, psychological, and social adaptation. These findings support a personalised, multidisciplinary approach to treatment planning and outcome assessment, with greater emphasis on patient-reported outcomes alongside radiological and technical results.
- Open Access
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Applied Bionics and Biomechanics
- Vol. 10 (1) , 10-20
CT-based assessment of posterior ligamentous complex integrity in AO spine type A1–A2 thoracolumbar junction fractures under conditions of diagnostic uncertainty
Purpose: The diagnosis of posterior ligamentous complex (PLC) injury in thoracolumbar fractures remains a major challenge under conditions of diagnostic uncertainty, particularly when magnetic resonance imaging (MRI) is unavailable or delayed. This study aimed to develop and internally validate a quantitative CT-based model and a clinical nomogram for predicting PLC status in AO Spine type A1–A2 fractures using machine learning–guided morphometric analysis. Methods: CT and MRI data from 90 patients with thoracolumbar junction injuries were retrospectively analyzed, including 43 patients with AO Spine type A1–A2 fractures used for model development. Key morphometric parameters, including the acute interspinous expansion angle (AIEA), anterior-to-posterior height ratio (A/P), and bone density expressed in Hounsfield units (HU), were measured. An extreme gradient boosting (XGBoost) algorithm was used to estimate feature importance, which subsequently informed the development of an interpretable 10-point scoring scale and a logistic regression–based nomogram. Model performance was assessed using the area under the receiver operating characteristic curve (AUC) and calibration analysis with bootstrap correction. Results: The scoring scale identified AIEA and the A/P ratio as the most influential predictors, contributing 10.0 and 8.5 points, respectively. The score-based model demonstrated high discriminatory performance with an AUC of 0.944 (95% CI: 0.912–0.976), exceeding that of the baseline machine learning model (AUC = 0.836). Each additional point on the scale was associated with a 31% increase in the odds of PLC injury (odds ratio 1.31, p < 0.05). Calibration analysis showed good agreement between predicted and observed probabilities across the clinically relevant risk range (MAE = 0.041). Conclusion: The proposed CT-based prognostic model provides an objective and transparent tool for risk stratification in AO Spine type A1–A2 thoracolumbar fractures. By quantifying the probability of occult posterior instability, the nomogram supports evidence-based decision-making regarding the need for MRI and surgical stabilization in acute thoracolumbar trauma.
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Applied Bionics and Biomechanics
- Vol. 10 (1) , 10-20
Open AccessCT-based assessment of posterior ligamentous complex integrity in AO spine type A1–A2 thoracolumbar junction fractures under conditions of diagnostic uncertainty
Purpose: The diagnosis of posterior ligamentous complex (PLC) injury in thoracolumbar fractures remains a major challenge under conditions of diagnostic uncertainty, particularly when magnetic resonance imaging (MRI) is unavailable or delayed. This study aimed to develop and internally validate a quantitative CT-based model and a clinical nomogram for predicting PLC status in AO Spine type A1–A2 fractures using machine learning–guided morphometric analysis. Methods: CT and MRI data from 90 patients with thoracolumbar junction injuries were retrospectively analyzed, including 43 patients with AO Spine type A1–A2 fractures used for model development. Key morphometric parameters, including the acute interspinous expansion angle (AIEA), anterior-to-posterior height ratio (A/P), and bone density expressed in Hounsfield units (HU), were measured. An extreme gradient boosting (XGBoost) algorithm was used to estimate feature importance, which subsequently informed the development of an interpretable 10-point scoring scale and a logistic regression–based nomogram. Model performance was assessed using the area under the receiver operating characteristic curve (AUC) and calibration analysis with bootstrap correction. Results: The scoring scale identified AIEA and the A/P ratio as the most influential predictors, contributing 10.0 and 8.5 points, respectively. The score-based model demonstrated high discriminatory performance with an AUC of 0.944 (95% CI: 0.912–0.976), exceeding that of the baseline machine learning model (AUC = 0.836). Each additional point on the scale was associated with a 31% increase in the odds of PLC injury (odds ratio 1.31, p < 0.05). Calibration analysis showed good agreement between predicted and observed probabilities across the clinically relevant risk range (MAE = 0.041). Conclusion: The proposed CT-based prognostic model provides an objective and transparent tool for risk stratification in AO Spine type A1–A2 thoracolumbar fractures. By quantifying the probability of occult posterior instability, the nomogram supports evidence-based decision-making regarding the need for MRI and surgical stabilization in acute thoracolumbar trauma.
- Open Access
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Orthopedics & Rheumatology
- Vol. 18 (2) , 75-84
Prediction of posterior ligamentous complex injury in AO spine type A3–A4 fractures of the thoracolumbar junction using CT morphometry
Introduction: The integrity of the posterior ligamentous complex (PLC) is a key determinant of spinal stability and treatment strategy in AO Spine A3–A4 burst fractures of the thoracolumbar junction. While MRI remains the reference standard for PLC assessment, its availability in the acute trauma setting is frequently limited, necessitating CT-based diagnostic approaches. The aim of the study was to develop and internally validate a quantitative CT-based prognostic model for PLC injury in AO Spine A3–A4 thoracolumbar junction fractures and to translate it into a clinically applicable point-based score and nomogram. Material and methods: A retrospective observational study included 47 patients with AO Spine A3 (n = 13) or A4 (n = 34) fractures at the Th11–L2 level who underwent both CT and MRI in the acute post-traumatic period. PLC status verified by MRI and/or intraoperative findings served as the reference standard. Quantitative morphometric analysis encompassed eleven CT parameters reflecting vertebral body geometry, degree of fragmentation, and posterior structure involvement. A binary classification model was developed using extreme gradient boosting (XGBoost) and internally validated by repeated stratified 5-fold cross-validation (20 repeats). Feature importance was quantified using a composite integral weight metric. An interval-based point score and nomogram were derived from the model to enable bedside risk estimation. Results: PLC injury was confirmed in 22 patients (46.8%). The XGBoost model achieved an in-sample AUC of 0.949 and a cross-validated AUC of 0.894. The dominant predictors were AVH ratio, A/P ratio, and the presence of free bone fragments, whereas angular parameters contributed moderately. The point-based logistic model retained high discriminative performance (AUC = 0.880) with good calibration (Brier score 0.103; slope 1.00). Each additional point on the scale was associated with a 20% increase in the odds of PLC injury (OR 1.20; 95% CI 1.14–1.27). A total score exceeding 15–18 points was identified as a threshold indicating high instability risk. Conclusion: The developed quantitative CT-based score and nomogram enable reliable risk stratification of PLC injury in AO Spine A3–A4 fractures. The model demonstrated high predictive accuracy, biomechanical interpretability, and practical applicability in settings where MRI is unavailable. External validation in an independent prospective cohort is required before routine clinical implementation.
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Orthopedics & Rheumatology
- Vol. 18 (2) , 75-84
Open AccessPrediction of posterior ligamentous complex injury in AO spine type A3–A4 fractures of the thoracolumbar junction using CT morphometry
Introduction: The integrity of the posterior ligamentous complex (PLC) is a key determinant of spinal stability and treatment strategy in AO Spine A3–A4 burst fractures of the thoracolumbar junction. While MRI remains the reference standard for PLC assessment, its availability in the acute trauma setting is frequently limited, necessitating CT-based diagnostic approaches. The aim of the study was to develop and internally validate a quantitative CT-based prognostic model for PLC injury in AO Spine A3–A4 thoracolumbar junction fractures and to translate it into a clinically applicable point-based score and nomogram. Material and methods: A retrospective observational study included 47 patients with AO Spine A3 (n = 13) or A4 (n = 34) fractures at the Th11–L2 level who underwent both CT and MRI in the acute post-traumatic period. PLC status verified by MRI and/or intraoperative findings served as the reference standard. Quantitative morphometric analysis encompassed eleven CT parameters reflecting vertebral body geometry, degree of fragmentation, and posterior structure involvement. A binary classification model was developed using extreme gradient boosting (XGBoost) and internally validated by repeated stratified 5-fold cross-validation (20 repeats). Feature importance was quantified using a composite integral weight metric. An interval-based point score and nomogram were derived from the model to enable bedside risk estimation. Results: PLC injury was confirmed in 22 patients (46.8%). The XGBoost model achieved an in-sample AUC of 0.949 and a cross-validated AUC of 0.894. The dominant predictors were AVH ratio, A/P ratio, and the presence of free bone fragments, whereas angular parameters contributed moderately. The point-based logistic model retained high discriminative performance (AUC = 0.880) with good calibration (Brier score 0.103; slope 1.00). Each additional point on the scale was associated with a 20% increase in the odds of PLC injury (OR 1.20; 95% CI 1.14–1.27). A total score exceeding 15–18 points was identified as a threshold indicating high instability risk. Conclusion: The developed quantitative CT-based score and nomogram enable reliable risk stratification of PLC injury in AO Spine A3–A4 fractures. The model demonstrated high predictive accuracy, biomechanical interpretability, and practical applicability in settings where MRI is unavailable. External validation in an independent prospective cohort is required before routine clinical implementation.
- Open Access
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Orthopedics & Rheumatology
- Vol. 18 (3) , 109-118
Development and retrospective decision-level evaluation of an individualized treatment-planning algorithm for traumatic thoracolumbar junction injuries
Background: Traumatic injuries of the thoracolumbar junction (Th11–L2) are one of the most common sites of spinal trauma and frequently combine structural instability with neurological deficit, while treatment planning - conservative versus operative management, short versus long fixation, decompression, anterior column reconstruction - varies substantially between surgeons. Classification systems describe injury severity but provide little formalization of the tactical extent of intervention. The aim was to present an individualized treatment-planning algorithm and to evaluate how observed structural failures mapped to predefined decision levels in a retrospective cohort. Methods. The algorithm was assembled by integrating morphometric, prognostic, and biomechanical models and structured as if–then sequences separating the strategic, tactical, and technical decision levels. Its inputs are the AO Spine type, the morpho-functional variant, the neurological status by ISNCSCI (AIS grade), the spinal canal state, the posterior ligamentous complex (PLC) state, bone density (HU), mechanical exposure, and clinical context. The retrospective evaluation was performed on 326 patients (12-month follow-up in 297), matching endpoint events to the algorithm's branch points. Results. The algorithm operates as a sequence of gates: a verification gate, a morphological branch (A1–A2, A3–A4, B, C), and neurological, ligamentous, densitometric, and contextual modifying gates, followed by the choice of strategy and tactical extent. Among the 297 patients with 12-month follow-up, 43 endpoint events occurred (41 structural failures and 2 clinico-deformational failures; an adverse outcome in 38 patients); 40 of the 41 structural failures mapped to the tactical level, and no isolated strategic-level failures were found. Corpectomy was associated with the numerically highest observed rate of structural failure (6/23; 26.1%; 95% CI 10.2–48.4%), all due to cage subsidence; this estimate was descriptive owing to the small subgroup size and probable confounding by indication, with no descriptive advantage in neurological recovery (47.8% versus 51.2%). The evaluation showed that the algorithm mainly refines the tactical rather than the strategic level of a decision. Conclusions. The proposed algorithm provides a transparent framework for treatment planning, and its underlying modules showed internal performance compatible with exploratory risk stratification. In retrospective decision-level evaluation, most structural failures mapped to tactical branch points. The algorithm should be considered a decision-support tool and requires prospective external validation.
- 1 January 2026
- Published by MedCrave Group Kft. in MOJ Orthopedics & Rheumatology
- Vol. 18 (3) , 109-118
Open AccessDevelopment and retrospective decision-level evaluation of an individualized treatment-planning algorithm for traumatic thoracolumbar junction injuries
Background: Traumatic injuries of the thoracolumbar junction (Th11–L2) are one of the most common sites of spinal trauma and frequently combine structural instability with neurological deficit, while treatment planning - conservative versus operative management, short versus long fixation, decompression, anterior column reconstruction - varies substantially between surgeons. Classification systems describe injury severity but provide little formalization of the tactical extent of intervention. The aim was to present an individualized treatment-planning algorithm and to evaluate how observed structural failures mapped to predefined decision levels in a retrospective cohort. Methods. The algorithm was assembled by integrating morphometric, prognostic, and biomechanical models and structured as if–then sequences separating the strategic, tactical, and technical decision levels. Its inputs are the AO Spine type, the morpho-functional variant, the neurological status by ISNCSCI (AIS grade), the spinal canal state, the posterior ligamentous complex (PLC) state, bone density (HU), mechanical exposure, and clinical context. The retrospective evaluation was performed on 326 patients (12-month follow-up in 297), matching endpoint events to the algorithm's branch points. Results. The algorithm operates as a sequence of gates: a verification gate, a morphological branch (A1–A2, A3–A4, B, C), and neurological, ligamentous, densitometric, and contextual modifying gates, followed by the choice of strategy and tactical extent. Among the 297 patients with 12-month follow-up, 43 endpoint events occurred (41 structural failures and 2 clinico-deformational failures; an adverse outcome in 38 patients); 40 of the 41 structural failures mapped to the tactical level, and no isolated strategic-level failures were found. Corpectomy was associated with the numerically highest observed rate of structural failure (6/23; 26.1%; 95% CI 10.2–48.4%), all due to cage subsidence; this estimate was descriptive owing to the small subgroup size and probable confounding by indication, with no descriptive advantage in neurological recovery (47.8% versus 51.2%). The evaluation showed that the algorithm mainly refines the tactical rather than the strategic level of a decision. Conclusions. The proposed algorithm provides a transparent framework for treatment planning, and its underlying modules showed internal performance compatible with exploratory risk stratification. In retrospective decision-level evaluation, most structural failures mapped to tactical branch points. The algorithm should be considered a decision-support tool and requires prospective external validation.
- Open Access
- 29 December 2025
- Published by Romodanov Neurosurgery Institute in Ukrainian Neurosurgical Journal
- Vol. 31 (4) , 44-54
Short-segment stabilization techniques for burst fractures of the thoracolumbar junction: a finite element study under lateral flexion
Introduction: Burst fractures of the thoracolumbar junction (TLJ, T10–L2) are common spinal injuries associated with a high risk of neurological complications. Transpedicular fixation is one of the most effective treatment methods; however, the optimal choice of fixation configuration remains unresolved. This study aims to analyze the stress-strain state of various short-segment transpedicular fixation configurations for Th12 vertebra burst fractures under lateral flexion loading. Materials and methods: A finite element model of the Th9–L5 spinal segment with a simulated Th12 burst fracture was created. Four fixation configurations were considered: M1 – short screws in Th11 and L1 (without intermediate screws), M2 – long screws in Th11 and L1 (without intermediate screws), M3 – short screws in Th11 and L1 with intermediate screws in Th12, and M4 – long screws in Th11 and L1 with intermediate screws in Th12. The models were analyzed using CosmosM software, assessing equivalent von Mises stress at 18 control points. Loads simulated physiological lateral trunk bending. Results: Models with long screws (M2, M4) demonstrated lower maximum stresses in connecting rods (315.5–321.0 MPa) compared to short screws (324.8–324.9 MPa). The inclusion of intermediate screws (M3, M4) significantly reduced stress in the fractured Th12 vertebra (by up to 28%), in adjacent vertebral endplates (by 18–25%), and at screw entry points into vertebral arches (up to 28%). The lowest fixation screw stresses were observed in the model with long and intermediate screws (up to 38% lower compared to the baseline model M1). However, intermediate screws minimally influenced stresses in the connecting rods (up to 1.2%). Conclusions: The optimal short-segment transpedicular fixation configuration is the use of long screws in adjacent vertebrae combined with intermediate fixation in the fractured vertebra (M4). This approach provides optimal load distribution, reduces the risk of construct failure, and preserves mobility of adjacent segments. Long screws improve overall system stiffness, while intermediate screws effectively stabilize the damaged segment and significantly unload critical areas of the construct and adjacent anatomical structures.
- 29 December 2025
- Published by Romodanov Neurosurgery Institute in Ukrainian Neurosurgical Journal
- Vol. 31 (4) , 44-54
Open AccessShort-segment stabilization techniques for burst fractures of the thoracolumbar junction: a finite element study under lateral flexion
Introduction: Burst fractures of the thoracolumbar junction (TLJ, T10–L2) are common spinal injuries associated with a high risk of neurological complications. Transpedicular fixation is one of the most effective treatment methods; however, the optimal choice of fixation configuration remains unresolved. This study aims to analyze the stress-strain state of various short-segment transpedicular fixation configurations for Th12 vertebra burst fractures under lateral flexion loading. Materials and methods: A finite element model of the Th9–L5 spinal segment with a simulated Th12 burst fracture was created. Four fixation configurations were considered: M1 – short screws in Th11 and L1 (without intermediate screws), M2 – long screws in Th11 and L1 (without intermediate screws), M3 – short screws in Th11 and L1 with intermediate screws in Th12, and M4 – long screws in Th11 and L1 with intermediate screws in Th12. The models were analyzed using CosmosM software, assessing equivalent von Mises stress at 18 control points. Loads simulated physiological lateral trunk bending. Results: Models with long screws (M2, M4) demonstrated lower maximum stresses in connecting rods (315.5–321.0 MPa) compared to short screws (324.8–324.9 MPa). The inclusion of intermediate screws (M3, M4) significantly reduced stress in the fractured Th12 vertebra (by up to 28%), in adjacent vertebral endplates (by 18–25%), and at screw entry points into vertebral arches (up to 28%). The lowest fixation screw stresses were observed in the model with long and intermediate screws (up to 38% lower compared to the baseline model M1). However, intermediate screws minimally influenced stresses in the connecting rods (up to 1.2%). Conclusions: The optimal short-segment transpedicular fixation configuration is the use of long screws in adjacent vertebrae combined with intermediate fixation in the fractured vertebra (M4). This approach provides optimal load distribution, reduces the risk of construct failure, and preserves mobility of adjacent segments. Long screws improve overall system stiffness, while intermediate screws effectively stabilize the damaged segment and significantly unload critical areas of the construct and adjacent anatomical structures.
- Open Access
- 10 December 2025
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 26 (6) , 393-402
Stress-strain state of a thoracolumbar spine model with a Th12 type A1 vertebral fracture under short-segment pedicle fixation: analysis of compressive loading
Background. Fractures of the thoracolumbar junction (Th11-L2) are among the most common spinal injuries and frequently lead to post-traumatic deformities and neurological complications. The most widespread surgical treatment is short-segment pedicle fixation; however, questions remain regarding the necessity of including the fractured vertebra in the construct and the optimal screw length. Objective: to evaluate the stress-strain state of the thoracolumbar spine with a Th12 vertebral body fracture of type A1 according to the AO Spine classification, and to determine the influence of the main pedicle screw length and the presence of intermediate screws in the fractured vertebra during short-segment fixation. Materials and methods. A three-dimensional finite element model of the thoracolumbar spine (Th9-L5) was constructed based on computed tomography data. A type A1 Th12 vertebral body fracture (AO Spine classification) was simulated. Four short-segment pedicle fixation configurations were analyzed: short screws without intermediate screws; long screws without intermediate screws; short screws with intermediate screws in the Th12 vertebral body; long screws with intermediate screws in the Th12 vertebral body. An axial compressive load of 350 N was applied. Stress distribution was analyzed using the finite element method according to the von Mises criterion. Results. The distribution of stresses in the vertebral bodies showed only minor variations (2–3 %) across the models. The basic four-screw construct provided sufficient unloading of the fractured vertebra. Adding intermediate screws reduced stress in the main screws, particularly at Th11, but doubled stress levels in the supporting rods. The use of long bicortical screws exerted a moderate unloading effect on the bony structures but increased stress within the screws themselves, especially at L1. Conclusions. In cases of type A1 compression fractures requiring surgical management, short-segment four-screw fixation ensures adequate spinal stability while minimizing the mechanical load on the fractured vertebra. The use of long screws and additional intermediate screws is more appropriate for severe injuries, whereas in simple compression fractures such modifications do not offer significant biomechanical advantages but increase surgical invasiveness.
- 10 December 2025
- Published by Publishing House Zaslavsky in TRAUMA
- Vol. 26 (6) , 393-402
Open AccessStress-strain state of a thoracolumbar spine model with a Th12 type A1 vertebral fracture under short-segment pedicle fixation: analysis of compressive loading
Background. Fractures of the thoracolumbar junction (Th11-L2) are among the most common spinal injuries and frequently lead to post-traumatic deformities and neurological complications. The most widespread surgical treatment is short-segment pedicle fixation; however, questions remain regarding the necessity of including the fractured vertebra in the construct and the optimal screw length. Objective: to evaluate the stress-strain state of the thoracolumbar spine with a Th12 vertebral body fracture of type A1 according to the AO Spine classification, and to determine the influence of the main pedicle screw length and the presence of intermediate screws in the fractured vertebra during short-segment fixation. Materials and methods. A three-dimensional finite element model of the thoracolumbar spine (Th9-L5) was constructed based on computed tomography data. A type A1 Th12 vertebral body fracture (AO Spine classification) was simulated. Four short-segment pedicle fixation configurations were analyzed: short screws without intermediate screws; long screws without intermediate screws; short screws with intermediate screws in the Th12 vertebral body; long screws with intermediate screws in the Th12 vertebral body. An axial compressive load of 350 N was applied. Stress distribution was analyzed using the finite element method according to the von Mises criterion. Results. The distribution of stresses in the vertebral bodies showed only minor variations (2–3 %) across the models. The basic four-screw construct provided sufficient unloading of the fractured vertebra. Adding intermediate screws reduced stress in the main screws, particularly at Th11, but doubled stress levels in the supporting rods. The use of long bicortical screws exerted a moderate unloading effect on the bony structures but increased stress within the screws themselves, especially at L1. Conclusions. In cases of type A1 compression fractures requiring surgical management, short-segment four-screw fixation ensures adequate spinal stability while minimizing the mechanical load on the fractured vertebra. The use of long screws and additional intermediate screws is more appropriate for severe injuries, whereas in simple compression fractures such modifications do not offer significant biomechanical advantages but increase surgical invasiveness.