LLLev O. Luchnikov

Lev O. Luchnikov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lev O. Luchnikov has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Slot-die coated perovskite solar cells and modules with solvatophilic tri-functional self-assembling monolayers based on triphenylamine

    by Kseniia M. Sidorova, Polina S. Druzhinina, Polina K. Sukhorukova, Lev O. Luchnikov, Мikhail V. Zolotov, Michael D. Khitrov, Liya A. Poletavkina, Nikita S. Saratovsky, Dmitri Yu. Dorofeev, Elena Yu. Katarzhnova, et al.

  • Thermal ionic stability under ISOS-D-2 decouples room-temperature efficiency from durability in CsFAPbI3 perovskite solar cells

    by Anna A. Zarudnyaya, Ekaterina A. Ilicheva, Lev O. Luchnikov, Alexandra A. Feklistova, Dmitry Yu Dorofeev, Vladislav Kalinichenko, Aleksandra Furasova, Irina M. Danilovskaya, Dmitry S. Muratov, Anton A. Vasilev, et al.

  • Open Access

    Slot-die coated perovskite solar cells and modules with solvatophilic tri-functional self-assembling monolayers based on triphenylamine

    by Kseniia M. Sidorova, Polina S. Druzhinina, Polina Sukhorukova, Lev Luchnikov, Мikhail V. Zolotov, Liya A. Poletavkina, Nikita S. Saratovsky, Dmitri Dorofeev, Elena Yu. Katarzhnova, Ekaterina Ilicheva, et al.

    The use of solution-processed self-assembled monolayers (SAMs) to passivate metal oxide thin films is an effective approach for high-performance perovskite solar cells. However, commonly used SAMs suffer from poor uniformity and wettability issues in ultrathin layers (1000 h, ISOS-L-2). Correlating local non-uniform wetting spots with lifetime, dark saturation current, and temperature coefficients reveals that mitigating SAM-induced wetting defects is essential for scalable, stable perovskite photovoltaics.

  • Open Access

    Thermal Ionic Stability Under ISOS-D-2 Decouples Room-Temperature Efficiency from Durability in CsFAPbI3 Perovskite Solar Cells

    by Anna A. Zarudnyaya, Ekaterina Ilicheva, Lev Luchnikov, Aleksandra Feklistova, Dmitri Dorofeev, Vladislav Kalinichenko, Aleksandra Furasova, Dmitry S. Muratov, A Vasilev, L. A. Alexanyan, et al.

    Thermal performance of perovskite solar cells under elevated operating temperatures remains poorly understood, being one of the key bottlenecks for commercial deployment. While composition engineering has driven record power conversion efficiencies (PCEs), its impact on defect landscape and ionic transport stability is rarely quantified at the device level under harsh thermal stress (85°C). Here we compare two CsXFA1-XPbI₃ absorbers (x = 0.05 and 0.20) across structural, optical and ionic transport measurements under prolonged ISOS-D-2. Devices with reduced Cs concentration achieved PCE of 22.23% with high room-temperature recombination metrics, attributed to reduced lattice strain (ε = -0.00431) and charge carrier lifetimes. Temperature-coefficient measurements revealed that this advantage reverses under heating, with TPCE reaching -0.624%/°C versus -0.294%/°C for Cs 20%, driven by fill factor losses. Admittance and photo-induced spectroscopies resolved an increase in ion activation energy from 0.4 to >0.6 eV across Cs 5% and 20% compositions with different trends of diffusion coefficient. In Cs 20% devices, CsPbI3-rich cluster formation acted as an ionic sink, passivating active interfaces, while in Cs 5% devices unimpeded ion migration along grain boundaries affected charge collection efficiency. These findings establish that room-temperature efficiency and thermal ionic stability are decoupled parameters requiring independent compositional optimization.

  • Enhanced Thermal Stability of Inverted Perovskite Solar Cells by Bulky Passivation With Pyridine‐Functionalized Triphenylamine

    by Ekaterina A. Ilicheva, Irina A. Chuyko, Lev O. Luchnikov, Polina K. Sukhorukova, Nikita S. Saratovsky, Anton A. Vasilev, Luiza Alexanyan, Anna A. Zarudnyaya, Dmitri Yu. Dorofeev, Sergey S. Kozlov, et al.

    Despite competitive efficiency compared to Si solar cells and relevant stability at near room temperatures, the rapid degradation at elevated temperatures remains the critical obstacle for the exploitation of perovskite photovoltaics. In this work, a 4‐(pyridin‐4‐yl)triphenylamine (TPA‐Py) with pyridine anchor group was employed for intergrain bulk modification of double‐cation CsCH(NH 2 ) 2 PbI 3 perovskite absorbers to enhance thermal stability. Through coordination and dipole–dipole interactions, nitrogen‐containing fragments (diphenylamine and pyridine) of TPA‐Py passivate uncoordinated cations and improve the phase resilience of perovskite films against segregation. This resulted in a power conversion efficiency of 21.3% with a high open‐circuit voltage of 1.14 V. Notable impact of self‐assembled monolayer incorporated into the bulk of the perovskite film manifested in a huge improvement of thermal stability at 85°C (ISOS‐D‐2). TPA‐Py modification extended the T80 lifetime to ≈700 h compared to only 200 h for the reference under harsh heating stress in ambient conditions. In‐depth analysis using photoinduced voltage transients and admittance spectroscopy after different stress periods revealed the screening of ion migration (0.45 eV) for devices with TPA‐Py. This work offers an important understanding of the bulk modification of microcrystalline perovskite absorbers and a guide for robust design of bulk and buried interfaces in highly efficient perovskite solar cells.


  • Modulation of charge transport and rectification behavior in CsSnI3 thin films through A-site cation engineering

    by Anna A. Zarudnyaya, Gleb V. Segal, Andrey P. Morozov, Lev O. Luchnikov, Sergey Yu. Yurchuk, Alexey E. Aleksandrov, Ildar R. Sayarov, Alexey R. Tameev, Oleg Rabinovich, Ivan V. Schemerov, et al.

    CsSnI3 perovskite is a thin-film semiconductor with high intrinsic conductivity for various device applications (thermoelectric, photovoltaics, etc.). Stoichiometric CsSnI3 has high-density defects and structural imperfections affecting device performance. In this work, we made an investigation on A-site cation engineering to evaluate the correlation between structural and transport parameters for effective operation in rectifying devices. Here, we analyzed CsSnI3 thin films modified with methylamine (MA), formamidine (FA), guanidine (GuA), and 5-ammonium valeric acid (AVA) cations, correlating structural parameters obtained by Rietveld refinement with their optoelectronic and diode characteristics. MA-, FA-, and GuA-substituted films exhibited low sheet resistance (∼450–2200 Ω/sq); however, strain-induced lattice distortions and accumulated defects in GuA-substituted films significantly hindered effective charge collection and increased recombination losses. AVA substitution formed low-conductivity 2D interlayers, increasing resistance (>105 Ω/sq) and altering transient response characteristics, yet provided minimal reverse switching losses (∼100 μW/cm2), beneficial for high-frequency applications. FA substitution emerged as optimal, balancing structural stability, conductivity, minimal defects, and relevant diode properties. The obtained results highlight that targeted lattice modifications strongly influence the practical performance of rectifying p–i–n diodes based on CsSnI3.


  • Dual‐Functional Implant Based on Gellan‐Xanthan Hydrogel with Diopside, BMP‐2 and Lysostaphin for Bone Defect Repair and Control of Staphylococcal Infection

    by Anna S. Karyagina, Alexander V. Grishin, Alina G. Kudinova, Inna N. Bulygina, Elizaveta V. Koudan, Polina A. Orlova, Vera P. Datsenko, Anna V. Zhulina, Tatyana M. Grunina, Maria S. Poponova, et al.

    A new dual‐functional implant based on gellan‐xanthan hydrogel with calcium‐magnesium silicate ceramic diopside and recombinant lysostaphin and bone morphogenetic protein 2 (BMP‐2)‐ray is developed. In this composite, BMP‐2 is immobilized on microparticles of diopside while lysostaphin is mixed directly into the hydrogel, providing sustained release of BMP‐2 to allow gradual bone formation and rapid release of lysostaphin to eliminate infection immediately after implantation. Introduction of diopside of up to 3% (w/v) has a negligible effect on the mechanical properties of the hydrogel but provides a high sorption capacity for BMP‐2. The hydrogels show good biocompatibility and antibacterial activity. Lysostaphin released from the implants over a 3 h period efficiently kills planktonic cells and completely destroys 24 h pre‐formed biofilms of Staphylococcus aureus. Furthermore, in vivo experiments in a mouse model of critically‐sized cranial defects infected with S. aureus show a complete lack of osteogenesis when implants contain only BMP‐2, whereas, in the presence of lysostaphin, complete closure of the defect with newly formed mineralized bone tissue is observed. Thus, the new implantable gellan‐xanthan hydrogel with diopside and recombinant lysostaphin and BMP‐2 shows both osteogenic and antibacterial properties and represents a promising material for the treatment and/or prevention of osteomyelitis after bone trauma.


  • Open Access

    Micro-pixelated halide perovskite photodiodes fabricated with ultraviolet laser scribing

    by A. P. Morozov, P. A. Gostishchev, A. Zharkova, A. A. Vasilev, A. E. Aleksandrov, L. O. Luchnikov, A. R. Tameev, D. A. Kiselev, T. S. Ilina, A. R. Ishteev, et al.

    In this study, we present a complex investigation for miniaturizing perovskite photodiodes (PPDs) in various geometries with the use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we manufactured PPDs with pixel configurations of 70 × 130, 520 × 580, and 2000 × 2000 μm2. The utilization of UV-LS has a proven efficiency in achieving relevant diode characteristics, such as low dark currents and high shunt resistance, as well as ultrafast response. The multi-step scribing cycle provided precise patterning of PPDs in a string design. The dark current densities demonstrated exceptional uniformity, ranging from 10−10 A/cm2 for 2000 × 2000 μm2 pixelated PPDs to 10−9 A/cm2 for the 70 × 130 μm2 configuration. The string PPDs, consisting of 10 pixels per string, displayed homogenous dark current values, ensuring effective isolation between devices. Under green light illumination (540 nm), all PPD types exhibited a broad linear dynamic range (LDR). Specifically, LDR values reached 110, 117, and 136 dB for 70 × 130, 520 × 580, and 2000 × 2000 devices, respectively, spanning an illumination intensity range from 2 × 10−3 to 2 mW/cm2. High responsivity values up to 0.38 A/W, depending on the PPDs' geometry, highlight the potential of laser scribing devices for sensing in the visible range. The calculated specific detectivity performance (from 1011 to 1013 Jones) surpasses commercial analogs, while the sub-microsecond response of 70 × 130 and 520 × 580 μm2 miniaturized devices underscores their suitability for precise time resolution detection systems.


  • The buffer – Free semitransparent perovskite solar cells with ion-beam sputtered back electrode

    by Nigina Talbanova, Oleg Bronnikov, Lev Luchnikov, Harshavardhan Reddy Satthy, Dmitry Muratov, Daniil Gren, Aleksey Tameev, Aleksey Aleksandrov, Eugene S. Statnik, Pavel A. Somov, et al.


  • Cl‐Anion Engineering for Halide Perovskite Solar Cells and Modules with Enhanced Photostability

    by Pavel Gostishchev, Danila Saranin, Lev Luchnikov, Dmitry Muratov, Artur Ishteev, Marina Voronova, Dmitry Gets, Efim Argunov, Thai Son Le, Sergey Didenko, et al.

    This article shows the new insights for stabilizing the p‐i‐n perovskite solar cells (PSCs) and modules based on double cation CsFAPbI3 absorber using CsCl additives. The presence of chlorine in the perovskite crystal structure results in the decrease of the lattice parameters by 0.6 ± 0.06%, in the increase of the bandgap value (+0.018 eV), and charge carrier lifetimes with respect to the undoped one. The champion PSCs based on the CsFAPbI3−xClx absorber show an increase in power conversation efficiency from 18.06% up to 20.13% after Cl doping. The light‐soaking stability of PSCs measured at maximum power point demonstrates impressive increase of the T80 from 1128 h for CsFAPbI3‐based devices to more than 3479 h for CsFAPbI3−xClx ones. It is found that the Cl doping suppresses the formation of lead iodide and pure CsPbI3 induced by decomposition and phase segregation processes only when the perovskite is covered with the C60/BCP electron‐transporting layer (ETL), while in the structure without ETL Cl additive is not effective. Finally, the high potential of Cl‐anion engineering for the perovskite modules (5 × 5 cm2) is demonstrated, which shows promising 17.08% of power conversation efficiency and light‐soaking stability for 1396 h.