Aidong Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aidong Shen has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Bingsheng Li
State Key Laboratory of Integrated Optoelectronics, and Key Laboratory of UV Light Emitting Materials and Technology of Ministry of Education, School of Physics, Northeast Normal University 1 , Changchun 130024
11 shared publications Weizhe Cui
State Key Laboratory of Integrated Optoelectronics, and Key Laboratory of UV Light Emitting Materials and Technology of Ministry of Education, School of Physics, Northeast Normal University 1 , Changchun 130024
7 shared publications- Yichun Liu
State Key Laboratory of Integrated Optoelectronics, and Key Laboratory of UV Light Emitting Materials and Technology of Ministry of Education, School of Physics, Northeast Normal University 1 , Changchun 130024
6 shared publications - Yurui Han
State Key Laboratory of Integrated Optoelectronics, and Key Laboratory of UV Light Emitting Materials and Technology of Ministry of Education, School of Physics, Northeast Normal University 1 , Changchun 130024
6 shared publications - Rongpeng Fu
State Key Laboratory of Integrated Optoelectronics, and Key Laboratory of UV Light Emitting Materials and Technology of Ministry of Education, School of Physics, Northeast Normal University 1 , Changchun 130024
5 shared publications - Yuefei Wang
National Key Laboratory of Integrated Optoelectronics, Northeast Normal University 1 , Changchun 130028
5 shared publications
Latest Publications
- 31 July 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (3)
MOCVD growth of (AlxGa1−x)2O3 (x = 0–0.77) alloyed films for deep UV photodetection applications
(AlxGa1−x)2O3 alloy thin films with the tuning bandgap in a range of 4.95–6.26 eV have been achieved by adjusting the Al composition (x ≈ 0–0.77) grown on a c-plane sapphire substrate via metal-organic chemical vapor deposition. With the increase in the bandgap, the fabricated metal–semiconductor–metal (MSM) photodetectors exhibit a gradual blueshift of the spectral response wavelengths from 250 to 198 nm. X-ray diffraction characterization results indicated that the crystal structure of the films transformed from a single monoclinic β-phase (x ≤ 0.57) to a β/γ dual-phase coexistence state (x ∼ 0.67–0.77) with increasing Al composition. The optimal surface morphology and crystalline quality of the films were obtained at an Al composition of 0.20. Combined with the valence-band x-ray photoelectron spectroscopy and bandgap analysis results, it is found that the introduction of Al causes an upward shift of the conduction band minimum relative to the Fermi level, which is consistent with the observed increase in the optical bandgap and blueshift of the spectral response edge. Oxygen vacancy (VO) analysis demonstrates that the VO defect concentration first decreases and then increases with increasing Al composition. Based on these results, the evolution mechanism of VO defects is elucidated, and their intrinsic correlations with lattice strain, phase transition, and thin-film crystalline quality are discussed. The fabricated MSM photodetectors exhibited an excellent comprehensive performance at a bias of 10 V, with the dark current below 10 fA, the specific detectivity of 6.58 × 1014 Jones, and the UV-visible rejection ratio as high as 9.07 × 107. Under 185 nm illumination, the photocurrent to dark current ratio of the device with a high Al composition (x = 0.77) still remains around 1.18 × 102, indicating its excellent detection sensitivity and anti-interference capability in the deep ultraviolet to vacuum ultraviolet wavebands.
- 31 July 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (3)
MOCVD growth of (AlxGa1−x)2O3 (x = 0–0.77) alloyed films for deep UV photodetection applications
(AlxGa1−x)2O3 alloy thin films with the tuning bandgap in a range of 4.95–6.26 eV have been achieved by adjusting the Al composition (x ≈ 0–0.77) grown on a c-plane sapphire substrate via metal-organic chemical vapor deposition. With the increase in the bandgap, the fabricated metal–semiconductor–metal (MSM) photodetectors exhibit a gradual blueshift of the spectral response wavelengths from 250 to 198 nm. X-ray diffraction characterization results indicated that the crystal structure of the films transformed from a single monoclinic β-phase (x ≤ 0.57) to a β/γ dual-phase coexistence state (x ∼ 0.67–0.77) with increasing Al composition. The optimal surface morphology and crystalline quality of the films were obtained at an Al composition of 0.20. Combined with the valence-band x-ray photoelectron spectroscopy and bandgap analysis results, it is found that the introduction of Al causes an upward shift of the conduction band minimum relative to the Fermi level, which is consistent with the observed increase in the optical bandgap and blueshift of the spectral response edge. Oxygen vacancy (VO) analysis demonstrates that the VO defect concentration first decreases and then increases with increasing Al composition. Based on these results, the evolution mechanism of VO defects is elucidated, and their intrinsic correlations with lattice strain, phase transition, and thin-film crystalline quality are discussed. The fabricated MSM photodetectors exhibited an excellent comprehensive performance at a bias of 10 V, with the dark current below 10 fA, the specific detectivity of 6.58 × 1014 Jones, and the UV-visible rejection ratio as high as 9.07 × 107. Under 185 nm illumination, the photocurrent to dark current ratio of the device with a high Al composition (x = 0.77) still remains around 1.18 × 102, indicating its excellent detection sensitivity and anti-interference capability in the deep ultraviolet to vacuum ultraviolet wavebands.
- 1 April 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (2)
Self-powered p/Ga2O3/GaN p–i–n ultraviolet photodetector with a composite material made of polypyrrole (PPy) and nitrogen-doped graphene (PGr) as the P-region
A PPy/PGr/Ga2O3/GaN p–i–n heterojunction ultraviolet photodetector (UV PD) with polypyrrole (PPy) and nitrogen-doped graphene (PGr) combined as the p-region was fabricated, in which β-Ga2O3 was synthesized by substituting oxygen atoms for nitrogen atoms in the top layer of the GaN matrix at high temperature. In the self-powered mode, the device exhibits bimodal responses in the UVC–UVA bands. Compared with the single-peak response of the previously reported Ga2O3/GaN structure, the spectral response range has been greatly extended. In the UVC band, the responsivity reaches 36.4 mA/W, which is 21.4 times that of the unmodified device. The detectivity was improved to 1.5 × 1011 Jones, showing an 11.3-fold enhancement. It also exhibits fast photoresponse characteristics (rise/fall times of 0.09/10.8 ms, respectively). The significant improvement of device performance is mainly attributed to the effective modification of carrier transport by PPy and PGr, which not only increases the built-in electric field at the Ga2O3/GaN interface but also significantly suppresses carrier recombination. The design strategy proposed in this study, based on the synergistic incorporation of organic polymers and two-dimensional materials, provides new ideas and technical references for the development of ultraviolet photodetectors with high sensitivity and broad and fast spectral response.
- 1 April 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (2)
Self-powered p/Ga2O3/GaN p–i–n ultraviolet photodetector with a composite material made of polypyrrole (PPy) and nitrogen-doped graphene (PGr) as the P-region
A PPy/PGr/Ga2O3/GaN p–i–n heterojunction ultraviolet photodetector (UV PD) with polypyrrole (PPy) and nitrogen-doped graphene (PGr) combined as the p-region was fabricated, in which β-Ga2O3 was synthesized by substituting oxygen atoms for nitrogen atoms in the top layer of the GaN matrix at high temperature. In the self-powered mode, the device exhibits bimodal responses in the UVC–UVA bands. Compared with the single-peak response of the previously reported Ga2O3/GaN structure, the spectral response range has been greatly extended. In the UVC band, the responsivity reaches 36.4 mA/W, which is 21.4 times that of the unmodified device. The detectivity was improved to 1.5 × 1011 Jones, showing an 11.3-fold enhancement. It also exhibits fast photoresponse characteristics (rise/fall times of 0.09/10.8 ms, respectively). The significant improvement of device performance is mainly attributed to the effective modification of carrier transport by PPy and PGr, which not only increases the built-in electric field at the Ga2O3/GaN interface but also significantly suppresses carrier recombination. The design strategy proposed in this study, based on the synergistic incorporation of organic polymers and two-dimensional materials, provides new ideas and technical references for the development of ultraviolet photodetectors with high sensitivity and broad and fast spectral response.
- Open Access
- 1 February 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (2)
The effect of crystal quality on persistent photoconductivity in β -Ga2O3 photodetectors
Gallium oxide (Ga2O3) thin films were prepared using the metal organic chemical vapor deposition method, and photoconductive photodetectors were constructed. The results showed that with the increase in growth temperature, the grain size of Ga2O3 increased and the surface smoothness improved significantly. The full width at half maxima of the rocking curve decreases with the increase in growth temperature, indicating an improvement in crystal quality. The photoluminescence spectra of all films extend from ultraviolet (UV) to visible light. The responsivity of the fabricated photoconductive devices exceeds 5 A/W, with a maximum detectivity reaching ∼2 × 1015 Jones. The photoresponse spectrum is located in the solar-blind UV range, exhibiting excellent spectral selectivity. All devices exhibit significant photoconductive relaxation phenomena. The variations of these parameters are related to self-trapped holes (STHs) and defect-trapped holes within the material. Since STHs are an inherent characteristic of oxide semiconductors, they cannot be completely eliminated. The persistent photoconductivity effect can only be eliminated through external excitation.
- 1 February 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (2)
Open AccessThe effect of crystal quality on persistent photoconductivity in β -Ga2O3 photodetectors
Gallium oxide (Ga2O3) thin films were prepared using the metal organic chemical vapor deposition method, and photoconductive photodetectors were constructed. The results showed that with the increase in growth temperature, the grain size of Ga2O3 increased and the surface smoothness improved significantly. The full width at half maxima of the rocking curve decreases with the increase in growth temperature, indicating an improvement in crystal quality. The photoluminescence spectra of all films extend from ultraviolet (UV) to visible light. The responsivity of the fabricated photoconductive devices exceeds 5 A/W, with a maximum detectivity reaching ∼2 × 1015 Jones. The photoresponse spectrum is located in the solar-blind UV range, exhibiting excellent spectral selectivity. All devices exhibit significant photoconductive relaxation phenomena. The variations of these parameters are related to self-trapped holes (STHs) and defect-trapped holes within the material. Since STHs are an inherent characteristic of oxide semiconductors, they cannot be completely eliminated. The persistent photoconductivity effect can only be eliminated through external excitation.
- 7 January 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (1)
MOCVD-grown α-Ga2O3 with increased growth rate and improved crystal quality for deep UV optoelectronics application
α-Ga2O3 films with a more than threefold increase in growth rate were epitaxially grown on m-Al2O3 at 530 °C by employing a 700 °C high-temperature buffer layer (HTBL) in metal–organic chemical vapor deposition growth. The underlying mechanism of the enhanced growth was understood experimentally by the surface analysis and theoretically by a model based on Gibbs–Thomson equation and first-principles calculations. With HTBL, the crystal quality of the α-Ga2O3 was also significantly improved, as evidenced by the decreased x-ray diffraction rocking curve linewidth of the (303¯0) peak. The linewidth is down to 0.387°, which is significantly narrower than 0.592° from sample without HTBL. The surface morphology of HTBL features larger, more sparsely distributed islands, resulting in a lower chemical potential on the surface, which promotes the adsorption of Ga2O3-clusters by reducing the desorption and thus increases the growth. x-ray photoelectron spectroscopy showed more oxygen vacancies (Vo) on the HTBL surface. First-principles calculations indicated that Vo in the (303¯0)-surface reduced the adsorption energy from −5.48 to −6.61 eV, thereby promoting cluster adsorption. A solar-blind ultraviolet photodetector based-on α-Ga2O3 exhibited an ultra-low dark current of 0.1 pA at 10 V, a high light-to-dark current ratio of 106, a responsivity of 0.54 A/W, and a detectivity of 5.5 × 1012 Jones.
- 7 January 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (1)
MOCVD-grown α-Ga2O3 with increased growth rate and improved crystal quality for deep UV optoelectronics application
α-Ga2O3 films with a more than threefold increase in growth rate were epitaxially grown on m-Al2O3 at 530 °C by employing a 700 °C high-temperature buffer layer (HTBL) in metal–organic chemical vapor deposition growth. The underlying mechanism of the enhanced growth was understood experimentally by the surface analysis and theoretically by a model based on Gibbs–Thomson equation and first-principles calculations. With HTBL, the crystal quality of the α-Ga2O3 was also significantly improved, as evidenced by the decreased x-ray diffraction rocking curve linewidth of the (303¯0) peak. The linewidth is down to 0.387°, which is significantly narrower than 0.592° from sample without HTBL. The surface morphology of HTBL features larger, more sparsely distributed islands, resulting in a lower chemical potential on the surface, which promotes the adsorption of Ga2O3-clusters by reducing the desorption and thus increases the growth. x-ray photoelectron spectroscopy showed more oxygen vacancies (Vo) on the HTBL surface. First-principles calculations indicated that Vo in the (303¯0)-surface reduced the adsorption energy from −5.48 to −6.61 eV, thereby promoting cluster adsorption. A solar-blind ultraviolet photodetector based-on α-Ga2O3 exhibited an ultra-low dark current of 0.1 pA at 10 V, a high light-to-dark current ratio of 106, a responsivity of 0.54 A/W, and a detectivity of 5.5 × 1012 Jones.
- Open Access
- 1 December 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (21)
Surface passivation enhanced β-Ga2O3-based solar-blind photodetector via introducing an Al2O3 ultrathin layer
The surface properties of semiconductor devices have a significant effect on the transport and recombination of charge carriers, especially for planar structures. In this work, Al2O3 ultrathin layers with varying thicknesses (3, 5, and 10 nm) were introduced into β-Ga2O3 thin films to passivate surface dangling bonds. The passivation effect of Al2O3 was verified through surface state analysis. By comparison, it was found that the photodetector (PD) with a 5 nm Al2O3 passivation layer exhibited a high light–dark current ratio of 1.36 × 106, which was 8.4 times higher than the PD on the bare surface. At the same time, it has a high responsivity of 0.38 A/W, a high detectivity of 3.21 × 1012 Jones, and a fast response speed of 1.88 ms/31.46 ms. Combined with simulation results, it was verified that the Al2O3 passivation layer can effectively improve the electric field distribution and current density. This study unravels the role of dangling bonds passivation in β-Ga2O for high-performance solar-blind PDs.
- 1 December 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (21)
Open AccessSurface passivation enhanced β-Ga2O3-based solar-blind photodetector via introducing an Al2O3 ultrathin layer
The surface properties of semiconductor devices have a significant effect on the transport and recombination of charge carriers, especially for planar structures. In this work, Al2O3 ultrathin layers with varying thicknesses (3, 5, and 10 nm) were introduced into β-Ga2O3 thin films to passivate surface dangling bonds. The passivation effect of Al2O3 was verified through surface state analysis. By comparison, it was found that the photodetector (PD) with a 5 nm Al2O3 passivation layer exhibited a high light–dark current ratio of 1.36 × 106, which was 8.4 times higher than the PD on the bare surface. At the same time, it has a high responsivity of 0.38 A/W, a high detectivity of 3.21 × 1012 Jones, and a fast response speed of 1.88 ms/31.46 ms. Combined with simulation results, it was verified that the Al2O3 passivation layer can effectively improve the electric field distribution and current density. This study unravels the role of dangling bonds passivation in β-Ga2O for high-performance solar-blind PDs.
- Open Access
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 577-581
Performance Optimization of β-Ga₂O₃-Based Solar-Blind Photodetector by Introducing an Ultra-Thin Sn-Doped High Conductivity Layer
The metal/semiconductor (M/S) contact plays a crucial role in carrier collection efficiency and is a key factor in photoelectric conversion. To optimize the M/S contact of Al and$\beta $ -Ga2O3, several annealing procedures were explored, including low-temperature annealing, direct Sn layer deposition, and face-to-face annealing. Among these methods, the$\beta $ -Ga2O3-based solar-blind photodetector fabricated using face-to-face annealing—incorporating an ultra-thin Sn-doped high-conductivity layer—demonstrated superior performance. This device achieved an exceptionally high light-to-dark current ratio of$1.71\times 10{^{{8}}}$ , with a responsivity of 14.13 A/W and a detectivity of$1.87\times 10^{16}$ Jones at a 10 V bias under 255 nm irradiation ($23.75~\mu $ w/cm2 light intensity). Additionally, it is capable of providing quick signal feedback, with a decay time of 2.81 ms/72.46 ms. The enhanced performance of the face-to-face annealing method is attributed to the formation of a more uniform ultra-thin Sn-doped conductive layer. This layer effectively lowers the barrier height at the M/S interface, improves carrier migration, and reduces contact resistance. These findings highlight that interface engineering through Sn-doped conductive layers is a promising strategy for optimizing the performance of$\beta $ -Ga2O3-based photodetectors.- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 577-581
Open AccessPerformance Optimization of β-Ga₂O₃-Based Solar-Blind Photodetector by Introducing an Ultra-Thin Sn-Doped High Conductivity Layer
The metal/semiconductor (M/S) contact plays a crucial role in carrier collection efficiency and is a key factor in photoelectric conversion. To optimize the M/S contact of Al and$\beta $ -Ga2O3, several annealing procedures were explored, including low-temperature annealing, direct Sn layer deposition, and face-to-face annealing. Among these methods, the$\beta $ -Ga2O3-based solar-blind photodetector fabricated using face-to-face annealing—incorporating an ultra-thin Sn-doped high-conductivity layer—demonstrated superior performance. This device achieved an exceptionally high light-to-dark current ratio of$1.71\times 10{^{{8}}}$ , with a responsivity of 14.13 A/W and a detectivity of$1.87\times 10^{16}$ Jones at a 10 V bias under 255 nm irradiation ($23.75~\mu $ w/cm2 light intensity). Additionally, it is capable of providing quick signal feedback, with a decay time of 2.81 ms/72.46 ms. The enhanced performance of the face-to-face annealing method is attributed to the formation of a more uniform ultra-thin Sn-doped conductive layer. This layer effectively lowers the barrier height at the M/S interface, improves carrier migration, and reduces contact resistance. These findings highlight that interface engineering through Sn-doped conductive layers is a promising strategy for optimizing the performance of$\beta $ -Ga2O3-based photodetectors. - Top Cited Papers
High Gain, Low Voltage Solar‐Blind Deep UV Photodetector Based on Ga 2 O 3 /(Al x Ga 1‐x ) 2 O 3 /GaN nBp Heterojunction
In this study an (Al x Ga 1‐x ) 2 O 3 barrier layer is inserted between β ‐Ga 2 O 3 and GaN in a p‐GaN/n‐Ga 2 O 3 diode photodetector, causing the dark current to decrease considerably, and device performance to improve significantly. The β ‐Ga 2 O 3 / β ‐(Al x Ga 1‐x ) 2 O 3 /GaN n‐type/Barrier/p‐type photodetector achieves a photocurrent gain of 1246, responsivity of 237 A W −1 , and specific detectivity of 5.23 × 10 15 cm Hz 1/2 W −1 under a bias of −20 V. With the irradiation of 250 nm solar‐blind ultraviolet light, the photocurrent exhibits a dramatic nonlinear increase beyond a bias of ≈−4 V, attributed to interband electron tunneling. The onset of interband tunneling at a relatively low bias is due to the strong internal electric field formed by self‐trapped holes (STHs) in Ga 2 O 3 . This study also proposes an effective way to suppress persistent photoconductivity and significantly increase the device operation speed in photodetectors fabricated from Ga 2 O 3 through the light‐induced neutralization of STHs.
Top Cited PapersHigh Gain, Low Voltage Solar‐Blind Deep UV Photodetector Based on Ga 2 O 3 /(Al x Ga 1‐x ) 2 O 3 /GaN nBp Heterojunction
In this study an (Al x Ga 1‐x ) 2 O 3 barrier layer is inserted between β ‐Ga 2 O 3 and GaN in a p‐GaN/n‐Ga 2 O 3 diode photodetector, causing the dark current to decrease considerably, and device performance to improve significantly. The β ‐Ga 2 O 3 / β ‐(Al x Ga 1‐x ) 2 O 3 /GaN n‐type/Barrier/p‐type photodetector achieves a photocurrent gain of 1246, responsivity of 237 A W −1 , and specific detectivity of 5.23 × 10 15 cm Hz 1/2 W −1 under a bias of −20 V. With the irradiation of 250 nm solar‐blind ultraviolet light, the photocurrent exhibits a dramatic nonlinear increase beyond a bias of ≈−4 V, attributed to interband electron tunneling. The onset of interband tunneling at a relatively low bias is due to the strong internal electric field formed by self‐trapped holes (STHs) in Ga 2 O 3 . This study also proposes an effective way to suppress persistent photoconductivity and significantly increase the device operation speed in photodetectors fabricated from Ga 2 O 3 through the light‐induced neutralization of STHs.
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (2) , 172-175
Al-Nanoparticle Sensitized β-Ga2O3-Based Solar-Blind Photodetector Fabricated via Focused Ion Beam Micro/Nano Processing
The performance of β-Ga 2 O 3 -based solar blind photodetector (PD) has been enhanced apparently by utilizing the effects of localized surface plasmon resonance of Al nanoparticles (Al NPs) array. The size and period of the Al NPs array are determined using the finite-difference time-domain method to obtain optimal resonance absorption with β-Ga 2 O 3 in the solar-blind waveband. Al NPs were then fabricated using focused ion beam micro/nano processing on a β-Ga 2 O 3 -based metal-semiconductor-metal structure PD. The dark current of the β-Ga 2 O 3 structure with Al NPs (β-Ga 2 O 3 @Al) is 7.72 × 10 -12 A, which is two orders of magnitude lower than that of pure β-Ga 2 O 3 (8.01 ×10 -10 A). This difference is attributed to the partial oxidation of the Al NPs, which forms Al 2 O 3 and passivates the β-Ga 2 O 3 interface. In addition, due to the resonance absorption and the hot electrons generated by the interband transition of the Al NPs, the light current increases threefold, resulting in the β-Ga 2 O 3 @Al NP PD having a high light-to-dark current ratio of 5.57 ×10 4 . Under a bias of 20 V and 254-nm illumination (44.38 μW/cm 2 ), the β-Ga 2 O 3 @Al NP PD has high responsivity and detectivity of 131 A/W and 7.17 × 10 14 Jones, respectively. Furthermore, owing to the oxide shell Al 2 O 3 passivation and the surface plasmons of the Al NPs, the persistent photoconductivity exhibited by the pure β-Ga 2 O 3 at rise time is suppressed and the decay time is sped up.
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (2) , 172-175
Al-Nanoparticle Sensitized β-Ga2O3-Based Solar-Blind Photodetector Fabricated via Focused Ion Beam Micro/Nano Processing
The performance of β-Ga 2 O 3 -based solar blind photodetector (PD) has been enhanced apparently by utilizing the effects of localized surface plasmon resonance of Al nanoparticles (Al NPs) array. The size and period of the Al NPs array are determined using the finite-difference time-domain method to obtain optimal resonance absorption with β-Ga 2 O 3 in the solar-blind waveband. Al NPs were then fabricated using focused ion beam micro/nano processing on a β-Ga 2 O 3 -based metal-semiconductor-metal structure PD. The dark current of the β-Ga 2 O 3 structure with Al NPs (β-Ga 2 O 3 @Al) is 7.72 × 10 -12 A, which is two orders of magnitude lower than that of pure β-Ga 2 O 3 (8.01 ×10 -10 A). This difference is attributed to the partial oxidation of the Al NPs, which forms Al 2 O 3 and passivates the β-Ga 2 O 3 interface. In addition, due to the resonance absorption and the hot electrons generated by the interband transition of the Al NPs, the light current increases threefold, resulting in the β-Ga 2 O 3 @Al NP PD having a high light-to-dark current ratio of 5.57 ×10 4 . Under a bias of 20 V and 254-nm illumination (44.38 μW/cm 2 ), the β-Ga 2 O 3 @Al NP PD has high responsivity and detectivity of 131 A/W and 7.17 × 10 14 Jones, respectively. Furthermore, owing to the oxide shell Al 2 O 3 passivation and the surface plasmons of the Al NPs, the persistent photoconductivity exhibited by the pure β-Ga 2 O 3 at rise time is suppressed and the decay time is sped up.