Lisa Pieper
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lisa Pieper has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Mahen Mahendran
Faculty of Engineering, Queensland University of Technology, Brisbane, QLD 4000, Australia
4 shared publications - Francesca Lupi
Ruhr-Universität Bochum
1 shared publication Ruediger Hoeffer
1 shared publication- Ulf Winkelmann
Ruhr University Bochum,Bochum,Faculty of Civil and Environmental Engineering,Germany
1 shared publication
Latest Publications
- Open Access
Experimental and Numerical Investigations of Crest-Fixed Corrugated Steel Claddings Under Wind Uplift Loading at Elevated Temperatures
The 2019–2020 Black Summer bushfire in Australia is a good example of the frequent and severe bushfires (wildfires) observed around the world in recent years. Fire-enhanced winds and fire–wind interactions during those bushfire events have caused increased wind velocities in the vicinity of a bushfire front. This can lead to a premature failure of the building envelope, making it vulnerable to ember attack and direct flame contact. In Australia, crest-fixed cold-formed steel (CFS) claddings are commonly used for buildings in bushfire-prone areas because of their non-combustibility. Therefore, this study investigated the pull-through failure behaviour of corrugated CFS claddings under wind uplift/suction loading at elevated temperatures, simulating fire-enhanced winds during a bushfire by means of experimental and numerical studies. Experimental results showed a negligible influence of the thermal expansion of the cladding system on the pull-through failure behaviour, while a significant decrease in pull-through capacity was observed with increasing temperatures. Suitable finite element models were developed, validated and used in a detailed numerical parametric study. Based on the findings from these studies, a design equation was proposed for the pull-through capacity of the crest-fixed corrugated claddings at elevated temperatures.
Open AccessExperimental and Numerical Investigations of Crest-Fixed Corrugated Steel Claddings Under Wind Uplift Loading at Elevated Temperatures
The 2019–2020 Black Summer bushfire in Australia is a good example of the frequent and severe bushfires (wildfires) observed around the world in recent years. Fire-enhanced winds and fire–wind interactions during those bushfire events have caused increased wind velocities in the vicinity of a bushfire front. This can lead to a premature failure of the building envelope, making it vulnerable to ember attack and direct flame contact. In Australia, crest-fixed cold-formed steel (CFS) claddings are commonly used for buildings in bushfire-prone areas because of their non-combustibility. Therefore, this study investigated the pull-through failure behaviour of corrugated CFS claddings under wind uplift/suction loading at elevated temperatures, simulating fire-enhanced winds during a bushfire by means of experimental and numerical studies. Experimental results showed a negligible influence of the thermal expansion of the cladding system on the pull-through failure behaviour, while a significant decrease in pull-through capacity was observed with increasing temperatures. Suitable finite element models were developed, validated and used in a detailed numerical parametric study. Based on the findings from these studies, a design equation was proposed for the pull-through capacity of the crest-fixed corrugated claddings at elevated temperatures.
- Open Access
- 10 May 2023
- Published by Queensland University of Technology
Cold-formed steel cladding systems exposed to combined wind and bushfire conditions
Bushfire events have shown a strong interaction between the bushfire front and ambient winds leading to fire-enhanced wind action, which may cause premature damage to the steel cladding systems used as the critical external building envelope. Therefore, this thesis investigated the behaviour and strength of crest-fixed cold-formed steel (CFS) claddings under combined wind and bushfire actions. Comprehensive experimental and numerical studies of three CFS cladding systems were conducted under combined fire-enhanced wind action and elevated temperatures, and new design rules were developed. This research has thus enhanced the safety of CFS claddings in bushfires and overall bushfire resilience of buildings.
- 10 May 2023
- Published by Queensland University of Technology
Open AccessCold-formed steel cladding systems exposed to combined wind and bushfire conditions
Bushfire events have shown a strong interaction between the bushfire front and ambient winds leading to fire-enhanced wind action, which may cause premature damage to the steel cladding systems used as the critical external building envelope. Therefore, this thesis investigated the behaviour and strength of crest-fixed cold-formed steel (CFS) claddings under combined wind and bushfire actions. Comprehensive experimental and numerical studies of three CFS cladding systems were conducted under combined fire-enhanced wind action and elevated temperatures, and new design rules were developed. This research has thus enhanced the safety of CFS claddings in bushfires and overall bushfire resilience of buildings.
- 19 April 2023
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 238
Aerodynamic damping functions in vortex-induced vibrations for structures with sharp edges
- 19 April 2023
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 238
Aerodynamic damping functions in vortex-induced vibrations for structures with sharp edges
- 5 November 2022
- Published by Elsevier in Thin-Walled Structures
- Vol. 182
Numerical investigation and design of crest-fixed corrugated steel claddings under static wind uplift loading
- 5 November 2022
- Published by Elsevier in Thin-Walled Structures
- Vol. 182
Numerical investigation and design of crest-fixed corrugated steel claddings under static wind uplift loading
- 23 February 2022
- Published by Elsevier in Thin-Walled Structures
- Vol. 173
Pull-through failure of crest-fixed steel claddings under combined wind and bushfire conditions
- 23 February 2022
- Published by Elsevier in Thin-Walled Structures
- Vol. 173
Pull-through failure of crest-fixed steel claddings under combined wind and bushfire conditions
- 1 July 2021
- Published by Elsevier in Thin-Walled Structures
- Vol. 164
Mechanical properties of cold-formed steel cladding profiles at elevated temperatures
- 1 July 2021
- Published by Elsevier in Thin-Walled Structures
- Vol. 164
Mechanical properties of cold-formed steel cladding profiles at elevated temperatures