KKKyung-Rae Koo

Kyung-Rae Koo

*This is an algorithmically generated author record based on publicly available information.

Kyung-Rae Koo has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of Truss-Type Deployable Mesh Reflector Antenna—Part 2: Design and Ground Verification of 5 m-Scale Mesh Antenna

    by Chul-Hyung Lee, Ryoon-Ho Do, Seung-Hyun Kim, Yeong-Bae Kim, Seung-Mi Lee, Young-Hoon Kang, Won-Gu Seo, Kyung-Rae Koo, Yoon-Pyo Lee, In-O Jung

    This study presents the detailed design, structural analysis, assembly, and on-ground verification of a 5 m-scale offset deployable mesh reflector antenna, which represents a scale-up development from a previous 1.5 m-scale design. To mitigate structural vulnerability risks inherent in large-scale configurations, a high-stiffness ring truss was designed using space-grade CFRP (M55J) composites and aluminum. Finite element analysis numerically evaluated that the fundamental frequencies satisfied the requirements for both stowed (≥33 Hz) and deployed (≥1 Hz) states. High-precision assembly was achieved using a custom curvature-forming MGSE, effectively preventing structural distortion of the ring truss under tension tie loads. High assembly precision was verified through dimensional and alignment measurements. In addition, it was confirmed through V-Stars photogrammetry that the final reflector’s surface RMS error was optimized to 2.5 mm. Finally, the structural validity and electrical performance of the antenna were verified through the antenna deployment functional test and RF near-field test.


  • Open Access

    Development of Deployable Reflector Antenna for SAR-Satellite, Part 5: Experimental Verification of Qualification Model of Space-Grade 5 m-Class Deployable Reflector Antenna

    by Hyun-Guk Kim, Dong-Geon Kim, Ryoon-Ho Do, Chul-Hyung Lee, Dong-Yeon Kim, Seunghoon Ok, Yeong-Bae Kim, Min-Joo Kwak, Seung-Mi Lee, Jun-Oh Cho, et al.

    Synthetic aperture radar (SAR), which appeared in the early 1990s, refers to a technology that creates a virtual large aperture by receiving/combining signals from various locations while moving with a fixed antenna. Using SAR-based image acquisition technology, a reconnaissance satellite can obtain high-quality images regardless of the weather and day/night conditions. In this study, the qualification tests of a space-grade 5m-class deployable reflector antenna for satellites, which is the primary payload of a SAR-based satellite, were conducted. In order to ensure the electrical performance of the reflector antenna, an alignment verification test was performed using a laser tracker system during the assembly and integration process. Generally, the satellite experiences a considerable amount of structural load under the launch condition and is exposed to extremely low- and high-temperature thermal environments under the orbital condition. For the space mission, environmental tests should be conducted to verify the structural/thermal stability for the launch and orbital conditions. A deployment repeatability test was conducted to ensure that the deployment mechanism operated properly before/after each test. The qualification process and philosophy proposed in this work could be applied to the development of the space-grade deployable reflector antenna.


  • Open Access

    Development of Deployable Reflector Antenna for the SAR Satellite: Part 4—Thermal Analysis-Assumed Orbital Environment Using Well-Correlated Antenna Assembly Model Based on Thermal Balance Test

    by Ryoon-Ho Do, Hyun-Guk Kim, Dong-Geon Kim, Kyung-Rae Koo

    The deployable reflector antenna mounted on the SAR satellite is an antenna with a folding structure and is one of the main components of the satellite body. Due to the limited space inside the launch vehicle fairing, the mounting efficiency was improved by applying a structural feature that allows the antenna to be stowed compactly. In addition, weight reduction was required to lower launch costs and improve the satellite revisiting cycle; therefore, the main reflector of the deployable reflector antenna was designed and manufactured using carbon fiber reinforced polymer and aramid honeycomb core. Since the main reflector made of carbon fiber-reinforced polymer and aramid honeycomb core is not an isotropic material, differences between theoretical and actual thermal properties were expected. Therefore, in this study, a thermal balance test was performed on the thermal structure model of the deployable reflector antenna, and the thermal analysis model simulated by the ground test was corrected using the verified temperature conditions as a reference. The thermal properties of the composite material and the thermal conductivity coefficient between the main reflector and the main components connected to it were the targets of correction. In addition, a numerical optimization technique was applied to reduce computational costs, and the thermal analysis assumed the orbital environment model of the deployable reflector antenna was optimized using the corrected thermal properties.


  • Open Access

    Development of Truss-Type Deployable Mesh Reflector Antenna, Part 1: 1.5 m-Scale Mesh Antenna

    by ChulHyung Lee, DongGeon Kim, RyoonHo Do, SeungHyun Kim, GyeongHun Bae, KyungRae Koo, YoonPyo Lee, InO Jung

    This study is an initial study for the development of a large truss-type deployable mesh antenna, and it involved the development process of a 1.5 m-scale deployable mesh antenna. The geometric characteristics of the reflector were considered for the initial net design. Based on the antenna’s operating frequency, the L-band, the surface root mean square (RMS) error and focal length/diameter (F/D) ratio of the reflector were calculated. Design requirements for the antenna’s weight, stowed/deployed dimensions, and fundamental frequency were established. The material properties of each component were applied to the design model, and the geometric dimensions were verified to ensure that the weight and stowed/deployed design were fulfilled. The fundamental frequency requirements under stowed/deployed conditions were verified through modal analysis, and the structural deformation of the ring truss was confirmed through load analysis. The reflector antenna was assembled to the ring truss with the net and mesh, according to the assembly procedure. The curvature of the reflector surface was shaped by adjusting the bolt length of the tension control device. Using V-Stars, a specialized surface error measurement device, the surface RMS error requirements for the reflector were confirmed to be satisfied. Finally, the development verification of the antenna was completed by performing repeated deployment and a thermal vacuum test.


  • Open Access

    Development of Deployable Reflector Antenna for the SAR-Satellite, Part 3: Environmental Test of Structural-Thermal Model

    by Hyun-Guk Kim, Dong-Geon Kim, Ryoon-Ho Do, Min-Ju Kwak, Kyung-Rae Koo, Youngjoon Yu

    The concept of synthetic aperture radar (SAR) has the advantage of being able to obtain high-quality images even when the target area is at night or covered with obstacles such as clouds or fog. These imaging capabilities have led to a rapid increase in demand for space SAR imagery across a variety of sectors, including government, military, and commercial sectors. The SAR-based deployable reflector antenna was developed in this series of paper. The satellite performance is influenced by the aperture size of an antenna. To improve the image acquisition performance, the SAR antenna has the configuration of several foldable CFRP reflectors. In this paper, the experimental investigation of the Structural-thermal model deployable reflector antenna is performed. During the launch condition, the satellite and payload are subjected to the dynamic load. In the STM phase, the acoustic test was conducted to evaluate the structural stability of the deployable reflector antenna within the acoustic environment. The sinusoidal vibration test was implemented to investigate the fundamental frequency for inplane/normal directions and evaluate the structural stability of reflector antenna. By using experimental data obtained from the thermal-balance test, the well-correlated thermal analysis model was established to execute the orbital thermal analysis. The experimental results of the environmental test in STM phase show that the deployable reflector antenna has structural stability for the structural/thermal environments. The configuration of the deployable reflector antenna determined in STM phase can be applied to the qualification model.


  • Open Access

    Development of a Deployable Reflector Antenna for the Synthetic Aperture Radar Satellite, Part 2: Manufacturing and Qualification of the Main Reflector Using a Honeycomb Sandwich Composite Structure

    by Dong-Geon Kim, Hyun-Guk Kim, Dong-Yeon Kim, Ryoon-Ho Do, Kyung-Rae Koo, Young-Joon Yu

    A deployable reflector antenna (DR-A) is a structure that can be stored in a large-diameter Synthetic Aperture Radar (SAR) antenna and be mounted onto a launch vehicle. Considering the performance of the launch vehicle, it is necessary to develop a lightweight, high-performance antenna structure. The solid-type deployable reflector antenna is composed of a number of unit main reflectors. To reduce the weight of the antenna, a lightweight main reflector must be developed. In this paper, following “Development of Deployable Reflector Antenna for the SAR Satellite (Part 1)”, the manufacturing and qualification of the main reflector using honeycomb sandwich composites are described. Four types of composite main reflectors were manufactured with variables in the manufacturing process. The manufacturing variables include the curing process of the structure, the application of an adhesive film between the sheet and the core, and the venting path inside of the sandwich core. After manufacturing the main reflector, we performed weight measurements, non-destructive testing (NDT), surface error measurement using a Coordinate Measurement Machine (CMM), and modal testing for each type of composite main reflector. Through the research and development process, we found that a perforated hole is necessary when excluding the adhesive film during bonding of an aramid core and a CFRP sheet, and a lightweight composite reflector could be developed through this process. We selected the main reflector with the best performance and developed a composite main reflector that can be applied to satellites.


  • Open Access

    A Conceptual Design of Deployable Antenna Mechanisms

    by Hyeongseok Kang, Bohyun Hwang, Sooyoung Kim, Hyeonseok Lee, Kyungrae Koo, Seonggun Joe, Byungkyu Kim

    Over the last decade, large-scale antennas have been developed to enhance precise blue force tracking and improve situational awareness. In general, such large-scale antennas, ranging from 1 to up to 10 m, need a specific mechanism that can reconfigure their shapes and morphologies, resulting in stowing and deploying upon the given environment. In parallel, it must be noted that such deployable mechanisms should accommodate a large aperture diameter while ensuring they are lightweight, robust, and structurally rigid to avoid undesired deformations due to the deployment. With these in mind, this work presents a large frustum-shaped deployable antenna mechanism with a large aperture diameter of 7.5 m. The deployable mechanism is composed of hierarchical bayes the radial direction at 30° intervals. Twelve bayes in total identify the overall morphology of the deployable antenna, which features a dodecagon. Specifically, the bay is composed of three linkage structures: a six-bar linkage mechanism, a V-folding mechanism, and a single pantograph mechanism. As a result of static and dynamic simulations, it is identified that the mechanism achieves an area-to-mass ratio of 5.003 m2/kg and a safety factor of 323.8 upon deployment. Conclusively, this work demonstrates a strong potential of the deployable antenna mechanism, providing high rigidity and large aperture diameter while ensuring high stability in space environments.


  • Open Access

    Development of Deployable Reflector Antenna for the SAR-Satellite: Part 1. Design and Analysis of the Main Reflector Using Honeycomb Sandwich Composite Structure

    by Hyun-Guk Kim, Dong-Geon Kim, Ryoon-Ho Do, Kyung-Rae Koo, Young-Joon Yu

    The deployable reflector antenna based on the synthetic aperture radar is a satellite component that consists of a unit structure in the form of a folded reflector. During the launch process, this satellite antenna is in the stowed condition to improve storage efficiency. It is then deployed to perform the space mission in the on-orbit condition. Due to these structural characteristics of the deployable reflector antenna, the reflector is possible to be loaded in the limited volume of the launch vehicle with the reduced size. Additionally, because the deployable reflector antenna is made by the lightweight material of the carbon fiber reinforced polymer and honeycomb core, it can reduce the launching cost and improve the revisit interval. In this paper, the conceptual design of the main reflector of the deployable reflector antenna was conducted. The main reflector was designed as the honeycomb sandwich composite structure. To design the main reflector, the stacking sequence of the composite material and honeycomb core was investigated to maximize the structural stiffness and minimize the antenna’s mass. Subsequently, finite element analyses including modal, quasi-static, structural–thermal coupling, and transient response were performed to numerically evaluate the structural performance of the lightweight composite reflector antenna.


  • Open Access

    Lightweight Design for Active Small SAR S-STEP Satellite Using Multilayered High-Damping Carbon Fiber-Reinforced Plastic Patch

    by Kyung-Rae Koo, Hyun-Guk Kim, Dong-Geon Kim, Seong-Cheol Kwon, Hyun-Ung Oh

    In the launch environment, satellites are subjected to severe dynamic loads. These dynamic loads in the launch environment can lead to the malfunction of the payload, or to mission failure. In order to improve the structural stability of satellites and enable the reliable execution of space missions, it is necessary to have a reinforcement structure that reduces structural vibrations. However, for active small SAR satellites, the mass requirements are very strict, and this makes it difficult to apply an additional structure for vibration reduction. Therefore, we have developed a carbon fiber-reinforced plastic (CFRP)-based laminated patch to obtain a vibration reduction structure with a lightweight design for improving the structural stability of an S-STEP satellite. To verify the vibration reduction performance of the CFRP-based patch, sine and random vibration tests were conducted at the specimen level. Finally, the structural stability of the S-STEP satellite with the proposed CFRP-based laminated patch was experimentally verified using sine and random vibration tests. The validation results indicate that the CFRP-based laminated patch is an efficient solution which can effectively reduce the vibration response without the need for major changes to the design of the satellite structure. The lightweight vibration reduction mechanism developed in this study is one of the best solutions for protecting vibration-sensitive components.


  • Open Access

    Performance Investigation of Superplastic Shape Memory Alloy-Based Vibration Isolator for X-Band Active Small SAR Satellite of S-STEP under Acoustic and Random Vibration Environments

    by Hyun-Guk Kim, Seong-Cheol Kwon, Kyung-Rae Koo, Sung-Chan Song, Youngjoon Yu, Youngbum Song, Yeon-Hyeok Park, Hyun-Ung Oh

    In a launch environment, all satellites are subjected to severe random vibration and acoustic loads owing to rocket separation, airflow, and injection/combustion of the fuel. Structural vibrations induced by mechanical loads cause the malfunction of vibration-sensitive components in a satellite, leading to failures during the launch process or an on-orbit mission. Therefore, in this study, a shape memory alloy-based vibration isolator was used on the connection between the launch vehicle and satellite to reduce the vibration transmission to a satellite. The vibration isolator exhibited a high performance in the vibration isolation, owing to the dynamic properties of super-elasticity and high damping. The vibration-reduction performance of the vibration isolator was experimentally verified using random vibration and acoustic tests in a structural thermal model of the satellite developed in the synthetic aperture radar technology experimental project. Owing to the super-elasticity and high attenuation characteristics of the vibration isolator, it was possible to significantly reduce the random vibration of the satellite in the launch environment. Although the mechanical load of the acoustic test mainly excited the antenna on the upper side of the satellite rather than the bottom side, the results of the acoustic test showed the same trend as the random vibration test. From this perspective, the vibration isolator can contribute to saving the costs required for satellite development. These advantages have made it possible to develop satellites according to the new space paradigm, which is a trend in the space industry worldwide.