Hyun-Guk Kim
Hyun-Guk Kim has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Kyung-Rae Koo
Space R&D Center, Hanwha Systems, Gyeonggidong-ro, Namsa-eup, Cheoin-gu, Yongin-si 17121, Republic of Korea
6 shared publications - Dong-Geon Kim
Satellite Mechanical Team, Hanwha Systems, 491-23, Gyeonggidong-ro, Namsa-myeon, Cheoin-gu, Yongin-si 17121, Republic of Korea
5 shared publications - Ryoon-Ho Do
Space R&D Center, Hanwha Systems, Gyeonggidong-ro, Namsa-eup, Cheoin-gu, Yongin-si 17121, Republic of Korea
4 shared publications - Young-Joon Yu
Space R&D Center, Hanwha Systems, Gyeonggidong-ro, Namsa-eup, Cheoin-gu, Yongin-si 491-23, Gyeonggi-do, Republic of Korea
3 shared publications - Hyun-Ung Oh
Department of Aerospace and Mechanical Engineering, Korea Aerospace University, 76 Hanggongdaehak-ro, Deogyang-gu, Goyang 10540, Gyeonggi-do, Republic of Korea
2 shared publications - Jiye Bak
Space Research and Development Center, Hanwha Systems, Cheoin-gu, Yongin-si, Gyeonggi-do, Republic of Korea
2 shared publications
Latest Publications
- Open Access
A Systematic Qualification of a Planar-Type Phased Array Antenna with Cavity-Backed Slot Radiators for Communication Satellites Under Launch and On-Orbit Conditions
This paper presents a systematic qualification process for an electronic beam-steering antenna assembly for a low-Earth orbit (LEO) communication satellite. The transmitting/receiving antenna for the LEO communication satellite is based on a cavity-backed slot radiator, which has improved radiation efficiency and low mutual coupling compared to conventional PCB patch structures. In order to verify the electrical performance and reliability of the manual soldering process in a tightly spaced array structure with narrow element spacing and densely connected multi-channel RF modules, a reduced model was designed and fabricated and qualification tests were conducted under launch and on-orbit environments. The integration equipment was developed to ensure precise mechanical alignment and integration/disassembly between the radiating element arrays of the transmitting and receiving antenna modules and the RF modules, thereby establishing a manufacturability strategy for the antenna module and RF integrated module, which comprise a large array structure. Finally, the qualification tests of the transmitting and receiving antenna were performed to evaluate the structural and thermal stability considering the launch and orbital environments. The systematic qualification process proposed in this paper can be used in the development of the antenna system of the communication satellite.
Open AccessA Systematic Qualification of a Planar-Type Phased Array Antenna with Cavity-Backed Slot Radiators for Communication Satellites Under Launch and On-Orbit Conditions
This paper presents a systematic qualification process for an electronic beam-steering antenna assembly for a low-Earth orbit (LEO) communication satellite. The transmitting/receiving antenna for the LEO communication satellite is based on a cavity-backed slot radiator, which has improved radiation efficiency and low mutual coupling compared to conventional PCB patch structures. In order to verify the electrical performance and reliability of the manual soldering process in a tightly spaced array structure with narrow element spacing and densely connected multi-channel RF modules, a reduced model was designed and fabricated and qualification tests were conducted under launch and on-orbit environments. The integration equipment was developed to ensure precise mechanical alignment and integration/disassembly between the radiating element arrays of the transmitting and receiving antenna modules and the RF modules, thereby establishing a manufacturability strategy for the antenna module and RF integrated module, which comprise a large array structure. Finally, the qualification tests of the transmitting and receiving antenna were performed to evaluate the structural and thermal stability considering the launch and orbital environments. The systematic qualification process proposed in this paper can be used in the development of the antenna system of the communication satellite.
- Open Access
- 17 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2869
Development of Deployable Reflector Antenna for SAR-Satellite, Part 5: Experimental Verification of Qualification Model of Space-Grade 5 m-Class Deployable Reflector Antenna
Synthetic aperture radar (SAR), which appeared in the early 1990s, refers to a technology that creates a virtual large aperture by receiving/combining signals from various locations while moving with a fixed antenna. Using SAR-based image acquisition technology, a reconnaissance satellite can obtain high-quality images regardless of the weather and day/night conditions. In this study, the qualification tests of a space-grade 5m-class deployable reflector antenna for satellites, which is the primary payload of a SAR-based satellite, were conducted. In order to ensure the electrical performance of the reflector antenna, an alignment verification test was performed using a laser tracker system during the assembly and integration process. Generally, the satellite experiences a considerable amount of structural load under the launch condition and is exposed to extremely low- and high-temperature thermal environments under the orbital condition. For the space mission, environmental tests should be conducted to verify the structural/thermal stability for the launch and orbital conditions. A deployment repeatability test was conducted to ensure that the deployment mechanism operated properly before/after each test. The qualification process and philosophy proposed in this work could be applied to the development of the space-grade deployable reflector antenna.
- 17 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2869
Open AccessDevelopment of Deployable Reflector Antenna for SAR-Satellite, Part 5: Experimental Verification of Qualification Model of Space-Grade 5 m-Class Deployable Reflector Antenna
Synthetic aperture radar (SAR), which appeared in the early 1990s, refers to a technology that creates a virtual large aperture by receiving/combining signals from various locations while moving with a fixed antenna. Using SAR-based image acquisition technology, a reconnaissance satellite can obtain high-quality images regardless of the weather and day/night conditions. In this study, the qualification tests of a space-grade 5m-class deployable reflector antenna for satellites, which is the primary payload of a SAR-based satellite, were conducted. In order to ensure the electrical performance of the reflector antenna, an alignment verification test was performed using a laser tracker system during the assembly and integration process. Generally, the satellite experiences a considerable amount of structural load under the launch condition and is exposed to extremely low- and high-temperature thermal environments under the orbital condition. For the space mission, environmental tests should be conducted to verify the structural/thermal stability for the launch and orbital conditions. A deployment repeatability test was conducted to ensure that the deployment mechanism operated properly before/after each test. The qualification process and philosophy proposed in this work could be applied to the development of the space-grade deployable reflector antenna.
- Open Access
- 4 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11766
Development of Deployable Reflector Antenna for the SAR Satellite: Part 4—Thermal Analysis-Assumed Orbital Environment Using Well-Correlated Antenna Assembly Model Based on Thermal Balance Test
The deployable reflector antenna mounted on the SAR satellite is an antenna with a folding structure and is one of the main components of the satellite body. Due to the limited space inside the launch vehicle fairing, the mounting efficiency was improved by applying a structural feature that allows the antenna to be stowed compactly. In addition, weight reduction was required to lower launch costs and improve the satellite revisiting cycle; therefore, the main reflector of the deployable reflector antenna was designed and manufactured using carbon fiber reinforced polymer and aramid honeycomb core. Since the main reflector made of carbon fiber-reinforced polymer and aramid honeycomb core is not an isotropic material, differences between theoretical and actual thermal properties were expected. Therefore, in this study, a thermal balance test was performed on the thermal structure model of the deployable reflector antenna, and the thermal analysis model simulated by the ground test was corrected using the verified temperature conditions as a reference. The thermal properties of the composite material and the thermal conductivity coefficient between the main reflector and the main components connected to it were the targets of correction. In addition, a numerical optimization technique was applied to reduce computational costs, and the thermal analysis assumed the orbital environment model of the deployable reflector antenna was optimized using the corrected thermal properties.
- 4 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11766
Open AccessDevelopment of Deployable Reflector Antenna for the SAR Satellite: Part 4—Thermal Analysis-Assumed Orbital Environment Using Well-Correlated Antenna Assembly Model Based on Thermal Balance Test
The deployable reflector antenna mounted on the SAR satellite is an antenna with a folding structure and is one of the main components of the satellite body. Due to the limited space inside the launch vehicle fairing, the mounting efficiency was improved by applying a structural feature that allows the antenna to be stowed compactly. In addition, weight reduction was required to lower launch costs and improve the satellite revisiting cycle; therefore, the main reflector of the deployable reflector antenna was designed and manufactured using carbon fiber reinforced polymer and aramid honeycomb core. Since the main reflector made of carbon fiber-reinforced polymer and aramid honeycomb core is not an isotropic material, differences between theoretical and actual thermal properties were expected. Therefore, in this study, a thermal balance test was performed on the thermal structure model of the deployable reflector antenna, and the thermal analysis model simulated by the ground test was corrected using the verified temperature conditions as a reference. The thermal properties of the composite material and the thermal conductivity coefficient between the main reflector and the main components connected to it were the targets of correction. In addition, a numerical optimization technique was applied to reduce computational costs, and the thermal analysis assumed the orbital environment model of the deployable reflector antenna was optimized using the corrected thermal properties.
- Open Access
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 160638-160645
Thermal Analysis of Digital Transceiving Unit (DTU) for 400 kg-Class Communication Satellite Considering On-Orbit Environment
Low Earth Orbit(LEO) communication satellites have emerged as a key technology driving the evolution of global communications technology, owing to their capacity for high data transmission rates and extensive coverage area. In the field of communication satellites, there is an increasing demand for enhancement in payloads, with the objective of performing real-time data processing capabilities. This necessity has given rise to the densification of the high heat generating Electrical, Electronic and Electromechanical(EEE) parts. This causes the junction temperature of the EEE parts to rise, which has devastating effects on the performance, lifetime, and reliability of the payloads. Ultimately, the entire satellite system can lead to mission failure, so thermal design with prior thermal analysis and testing is required. In this study, a steady-state thermal analysis of the digital transceiving unit(DTU) of a payload for a LEO communication satellite was performed in the on-orbit environment. DTU is highly integrated with high-performance EEE parts due to its mission to relay communication signals on communication satellites. During the mission, the temperature distribution of the EEE parts under the worst cold and hot conditions was verified to ensure that the temperature requirements of the DTU were met. Furthermore, derating analysis of temperature was conducted to assess the thermal stability and reliability of EEE parts.
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 160638-160645
Open AccessThermal Analysis of Digital Transceiving Unit (DTU) for 400 kg-Class Communication Satellite Considering On-Orbit Environment
Low Earth Orbit(LEO) communication satellites have emerged as a key technology driving the evolution of global communications technology, owing to their capacity for high data transmission rates and extensive coverage area. In the field of communication satellites, there is an increasing demand for enhancement in payloads, with the objective of performing real-time data processing capabilities. This necessity has given rise to the densification of the high heat generating Electrical, Electronic and Electromechanical(EEE) parts. This causes the junction temperature of the EEE parts to rise, which has devastating effects on the performance, lifetime, and reliability of the payloads. Ultimately, the entire satellite system can lead to mission failure, so thermal design with prior thermal analysis and testing is required. In this study, a steady-state thermal analysis of the digital transceiving unit(DTU) of a payload for a LEO communication satellite was performed in the on-orbit environment. DTU is highly integrated with high-performance EEE parts due to its mission to relay communication signals on communication satellites. During the mission, the temperature distribution of the EEE parts under the worst cold and hot conditions was verified to ensure that the temperature requirements of the DTU were met. Furthermore, derating analysis of temperature was conducted to assess the thermal stability and reliability of EEE parts.
- Open Access
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 151316-151326
Structural Analysis of Digital Transceiver Unit (DTU) for 400kg-Class Communication Satellite Considering Launch Environment
Since Starlink’s introduction, global social and technical demands for satellite-based telecommunication systems have rapidly increased. In South Korea as well, research on communication satellites began several years ago. To realize satellite communication, both long-distance communication with ground station terminals and inter-satellite communication are essential. The digital transceiver unit (DTU), which provides beam-steering functionality to control signal directionality and concentrate emissions along specific trajectories, is one of the most critical payloads in satellite systems. This paper conducts a comprehensive structural analysis of the DTU to evaluate its stability under launch conditions. First, modal analysis was performed to verify compliance with stiffness requirements and ensure sufficient separation between the DTU’s vibrational modes and those of the satellite. Quasi-static analysis then assessed structural stability under static acceleration corresponding to design loads. Finally, random vibration and shock analyses were conducted to evaluate the reliability of EEE (electrical, electronic, and electromechanical) components on the PCB and fastener integrity. The analysis configuration modeled the DTU as integrated into the satellite system. Since environmental testing for the structural-thermal model of the satellite system remains ongoing, vibration/shock inputs followed ESA standards. Results demonstrate that the proposed DTU design meets all structural stability requirements for launch environments.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 151316-151326
Open AccessStructural Analysis of Digital Transceiver Unit (DTU) for 400kg-Class Communication Satellite Considering Launch Environment
Since Starlink’s introduction, global social and technical demands for satellite-based telecommunication systems have rapidly increased. In South Korea as well, research on communication satellites began several years ago. To realize satellite communication, both long-distance communication with ground station terminals and inter-satellite communication are essential. The digital transceiver unit (DTU), which provides beam-steering functionality to control signal directionality and concentrate emissions along specific trajectories, is one of the most critical payloads in satellite systems. This paper conducts a comprehensive structural analysis of the DTU to evaluate its stability under launch conditions. First, modal analysis was performed to verify compliance with stiffness requirements and ensure sufficient separation between the DTU’s vibrational modes and those of the satellite. Quasi-static analysis then assessed structural stability under static acceleration corresponding to design loads. Finally, random vibration and shock analyses were conducted to evaluate the reliability of EEE (electrical, electronic, and electromechanical) components on the PCB and fastener integrity. The analysis configuration modeled the DTU as integrated into the satellite system. Since environmental testing for the structural-thermal model of the satellite system remains ongoing, vibration/shock inputs followed ESA standards. Results demonstrate that the proposed DTU design meets all structural stability requirements for launch environments.
- Open Access
- 30 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1436
Development of Deployable Reflector Antenna for the SAR-Satellite, Part 3: Environmental Test of Structural-Thermal Model
The concept of synthetic aperture radar (SAR) has the advantage of being able to obtain high-quality images even when the target area is at night or covered with obstacles such as clouds or fog. These imaging capabilities have led to a rapid increase in demand for space SAR imagery across a variety of sectors, including government, military, and commercial sectors. The SAR-based deployable reflector antenna was developed in this series of paper. The satellite performance is influenced by the aperture size of an antenna. To improve the image acquisition performance, the SAR antenna has the configuration of several foldable CFRP reflectors. In this paper, the experimental investigation of the Structural-thermal model deployable reflector antenna is performed. During the launch condition, the satellite and payload are subjected to the dynamic load. In the STM phase, the acoustic test was conducted to evaluate the structural stability of the deployable reflector antenna within the acoustic environment. The sinusoidal vibration test was implemented to investigate the fundamental frequency for inplane/normal directions and evaluate the structural stability of reflector antenna. By using experimental data obtained from the thermal-balance test, the well-correlated thermal analysis model was established to execute the orbital thermal analysis. The experimental results of the environmental test in STM phase show that the deployable reflector antenna has structural stability for the structural/thermal environments. The configuration of the deployable reflector antenna determined in STM phase can be applied to the qualification model.
- 30 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1436
Open AccessDevelopment of Deployable Reflector Antenna for the SAR-Satellite, Part 3: Environmental Test of Structural-Thermal Model
The concept of synthetic aperture radar (SAR) has the advantage of being able to obtain high-quality images even when the target area is at night or covered with obstacles such as clouds or fog. These imaging capabilities have led to a rapid increase in demand for space SAR imagery across a variety of sectors, including government, military, and commercial sectors. The SAR-based deployable reflector antenna was developed in this series of paper. The satellite performance is influenced by the aperture size of an antenna. To improve the image acquisition performance, the SAR antenna has the configuration of several foldable CFRP reflectors. In this paper, the experimental investigation of the Structural-thermal model deployable reflector antenna is performed. During the launch condition, the satellite and payload are subjected to the dynamic load. In the STM phase, the acoustic test was conducted to evaluate the structural stability of the deployable reflector antenna within the acoustic environment. The sinusoidal vibration test was implemented to investigate the fundamental frequency for inplane/normal directions and evaluate the structural stability of reflector antenna. By using experimental data obtained from the thermal-balance test, the well-correlated thermal analysis model was established to execute the orbital thermal analysis. The experimental results of the environmental test in STM phase show that the deployable reflector antenna has structural stability for the structural/thermal environments. The configuration of the deployable reflector antenna determined in STM phase can be applied to the qualification model.
- Open Access
- 16 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (4) , 1590
Development of Deployable Reflector Antenna for the SAR-Satellite: Part 1. Design and Analysis of the Main Reflector Using Honeycomb Sandwich Composite Structure
The deployable reflector antenna based on the synthetic aperture radar is a satellite component that consists of a unit structure in the form of a folded reflector. During the launch process, this satellite antenna is in the stowed condition to improve storage efficiency. It is then deployed to perform the space mission in the on-orbit condition. Due to these structural characteristics of the deployable reflector antenna, the reflector is possible to be loaded in the limited volume of the launch vehicle with the reduced size. Additionally, because the deployable reflector antenna is made by the lightweight material of the carbon fiber reinforced polymer and honeycomb core, it can reduce the launching cost and improve the revisit interval. In this paper, the conceptual design of the main reflector of the deployable reflector antenna was conducted. The main reflector was designed as the honeycomb sandwich composite structure. To design the main reflector, the stacking sequence of the composite material and honeycomb core was investigated to maximize the structural stiffness and minimize the antenna’s mass. Subsequently, finite element analyses including modal, quasi-static, structural–thermal coupling, and transient response were performed to numerically evaluate the structural performance of the lightweight composite reflector antenna.
- 16 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (4) , 1590
Open AccessDevelopment of Deployable Reflector Antenna for the SAR-Satellite: Part 1. Design and Analysis of the Main Reflector Using Honeycomb Sandwich Composite Structure
The deployable reflector antenna based on the synthetic aperture radar is a satellite component that consists of a unit structure in the form of a folded reflector. During the launch process, this satellite antenna is in the stowed condition to improve storage efficiency. It is then deployed to perform the space mission in the on-orbit condition. Due to these structural characteristics of the deployable reflector antenna, the reflector is possible to be loaded in the limited volume of the launch vehicle with the reduced size. Additionally, because the deployable reflector antenna is made by the lightweight material of the carbon fiber reinforced polymer and honeycomb core, it can reduce the launching cost and improve the revisit interval. In this paper, the conceptual design of the main reflector of the deployable reflector antenna was conducted. The main reflector was designed as the honeycomb sandwich composite structure. To design the main reflector, the stacking sequence of the composite material and honeycomb core was investigated to maximize the structural stiffness and minimize the antenna’s mass. Subsequently, finite element analyses including modal, quasi-static, structural–thermal coupling, and transient response were performed to numerically evaluate the structural performance of the lightweight composite reflector antenna.
- Open Access
Lightweight Design for Active Small SAR S-STEP Satellite Using Multilayered High-Damping Carbon Fiber-Reinforced Plastic Patch
In the launch environment, satellites are subjected to severe dynamic loads. These dynamic loads in the launch environment can lead to the malfunction of the payload, or to mission failure. In order to improve the structural stability of satellites and enable the reliable execution of space missions, it is necessary to have a reinforcement structure that reduces structural vibrations. However, for active small SAR satellites, the mass requirements are very strict, and this makes it difficult to apply an additional structure for vibration reduction. Therefore, we have developed a carbon fiber-reinforced plastic (CFRP)-based laminated patch to obtain a vibration reduction structure with a lightweight design for improving the structural stability of an S-STEP satellite. To verify the vibration reduction performance of the CFRP-based patch, sine and random vibration tests were conducted at the specimen level. Finally, the structural stability of the S-STEP satellite with the proposed CFRP-based laminated patch was experimentally verified using sine and random vibration tests. The validation results indicate that the CFRP-based laminated patch is an efficient solution which can effectively reduce the vibration response without the need for major changes to the design of the satellite structure. The lightweight vibration reduction mechanism developed in this study is one of the best solutions for protecting vibration-sensitive components.
Open AccessLightweight Design for Active Small SAR S-STEP Satellite Using Multilayered High-Damping Carbon Fiber-Reinforced Plastic Patch
In the launch environment, satellites are subjected to severe dynamic loads. These dynamic loads in the launch environment can lead to the malfunction of the payload, or to mission failure. In order to improve the structural stability of satellites and enable the reliable execution of space missions, it is necessary to have a reinforcement structure that reduces structural vibrations. However, for active small SAR satellites, the mass requirements are very strict, and this makes it difficult to apply an additional structure for vibration reduction. Therefore, we have developed a carbon fiber-reinforced plastic (CFRP)-based laminated patch to obtain a vibration reduction structure with a lightweight design for improving the structural stability of an S-STEP satellite. To verify the vibration reduction performance of the CFRP-based patch, sine and random vibration tests were conducted at the specimen level. Finally, the structural stability of the S-STEP satellite with the proposed CFRP-based laminated patch was experimentally verified using sine and random vibration tests. The validation results indicate that the CFRP-based laminated patch is an efficient solution which can effectively reduce the vibration response without the need for major changes to the design of the satellite structure. The lightweight vibration reduction mechanism developed in this study is one of the best solutions for protecting vibration-sensitive components.
- 20 April 2023
- Published by The Korean Society for Noise and Vibration Engineering in Transactions of the Korean Society for Noise and Vibration Engineering
- Vol. 33 (2) , 181-192
Adaptive Vibration Suppression of a Finite Locally Resonant Metamaterial Plate using an Real-time State-space Identification based Controller
To improve the internal sound quality of an electric vehicle, the noises (tire and road noises), vibration, and discomfort should be reduced effectively. Compared to the conventional damping materials, the locally resonant metamaterial is advantageous in terms of reducing the vibration in the low frequency band and reducing the weight through a stop band, where vibration is not transmitted. However, the locally resonant metamaterial installed in a finite structure fails to form an ideal stop band. Additionally, there is a problem of occurrence vibration mode at an arbitrary frequency. Accordingly, there is a need for an active vibration control method capable of learning and actively reducing the vibration modes occurring at arbitrary frequencies within the stop band in real-time. In this study, a real-time state-space identification-based active vibration control method was proposed to reduce the vibration modes occurring at arbitrary frequencies within the stationary band of local resonance metamaterials. The active vibration control method proposed in this study, combined with the existing passive vibration reduction method, can be utilized to effectively reduce the vibration for random disturbance of a fluctuating system.
- 20 April 2023
- Published by The Korean Society for Noise and Vibration Engineering in Transactions of the Korean Society for Noise and Vibration Engineering
- Vol. 33 (2) , 181-192
Adaptive Vibration Suppression of a Finite Locally Resonant Metamaterial Plate using an Real-time State-space Identification based Controller
To improve the internal sound quality of an electric vehicle, the noises (tire and road noises), vibration, and discomfort should be reduced effectively. Compared to the conventional damping materials, the locally resonant metamaterial is advantageous in terms of reducing the vibration in the low frequency band and reducing the weight through a stop band, where vibration is not transmitted. However, the locally resonant metamaterial installed in a finite structure fails to form an ideal stop band. Additionally, there is a problem of occurrence vibration mode at an arbitrary frequency. Accordingly, there is a need for an active vibration control method capable of learning and actively reducing the vibration modes occurring at arbitrary frequencies within the stop band in real-time. In this study, a real-time state-space identification-based active vibration control method was proposed to reduce the vibration modes occurring at arbitrary frequencies within the stationary band of local resonance metamaterials. The active vibration control method proposed in this study, combined with the existing passive vibration reduction method, can be utilized to effectively reduce the vibration for random disturbance of a fluctuating system.
- Open Access
Performance Investigation of Superplastic Shape Memory Alloy-Based Vibration Isolator for X-Band Active Small SAR Satellite of S-STEP under Acoustic and Random Vibration Environments
In a launch environment, all satellites are subjected to severe random vibration and acoustic loads owing to rocket separation, airflow, and injection/combustion of the fuel. Structural vibrations induced by mechanical loads cause the malfunction of vibration-sensitive components in a satellite, leading to failures during the launch process or an on-orbit mission. Therefore, in this study, a shape memory alloy-based vibration isolator was used on the connection between the launch vehicle and satellite to reduce the vibration transmission to a satellite. The vibration isolator exhibited a high performance in the vibration isolation, owing to the dynamic properties of super-elasticity and high damping. The vibration-reduction performance of the vibration isolator was experimentally verified using random vibration and acoustic tests in a structural thermal model of the satellite developed in the synthetic aperture radar technology experimental project. Owing to the super-elasticity and high attenuation characteristics of the vibration isolator, it was possible to significantly reduce the random vibration of the satellite in the launch environment. Although the mechanical load of the acoustic test mainly excited the antenna on the upper side of the satellite rather than the bottom side, the results of the acoustic test showed the same trend as the random vibration test. From this perspective, the vibration isolator can contribute to saving the costs required for satellite development. These advantages have made it possible to develop satellites according to the new space paradigm, which is a trend in the space industry worldwide.
Open AccessPerformance Investigation of Superplastic Shape Memory Alloy-Based Vibration Isolator for X-Band Active Small SAR Satellite of S-STEP under Acoustic and Random Vibration Environments
In a launch environment, all satellites are subjected to severe random vibration and acoustic loads owing to rocket separation, airflow, and injection/combustion of the fuel. Structural vibrations induced by mechanical loads cause the malfunction of vibration-sensitive components in a satellite, leading to failures during the launch process or an on-orbit mission. Therefore, in this study, a shape memory alloy-based vibration isolator was used on the connection between the launch vehicle and satellite to reduce the vibration transmission to a satellite. The vibration isolator exhibited a high performance in the vibration isolation, owing to the dynamic properties of super-elasticity and high damping. The vibration-reduction performance of the vibration isolator was experimentally verified using random vibration and acoustic tests in a structural thermal model of the satellite developed in the synthetic aperture radar technology experimental project. Owing to the super-elasticity and high attenuation characteristics of the vibration isolator, it was possible to significantly reduce the random vibration of the satellite in the launch environment. Although the mechanical load of the acoustic test mainly excited the antenna on the upper side of the satellite rather than the bottom side, the results of the acoustic test showed the same trend as the random vibration test. From this perspective, the vibration isolator can contribute to saving the costs required for satellite development. These advantages have made it possible to develop satellites according to the new space paradigm, which is a trend in the space industry worldwide.