SAShahnoza Abduganiyeva

Shahnoza Abduganiyeva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shahnoza Abduganiyeva has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review

    by Yurii Syromiatnykov, Farmon Mamatov, Sanjar Toshtemirov, Sherzod Kurbanov, Uchkun Kodirov, Dilsabo Choriyeva, Golib Shodmonov, Moxichexra Begimkulova, Shakhriyor Jalilov, Azamat Safarov, et al.

    Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 132 unique sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50 mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.


  • Open Access

    Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review

    by Yurii Syromiatnykov, Farmon Mamatov, Sanjar Toshtemirov, Sherzod Kurbanov, Uchkun Kodirov, Dilsabo Choriyeva, Golib Shodmonov, Moxichexra Begimkulova, Shakhriyor Jalilov, Azamat Safarov, et al.

    Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 133 sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50-mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.


  • Open Access

    Soil Fragmentation, Surface Roughness and Draft Force in Chisel Tillage with a Toothed Roller: Experimental and Analytical Study

    by Yurii Syromiatnykov, Farmon Mamatov, Sherzod Kurbanov, Makhmatmurod Shomirzaev, Asroriddin Kasimov, Ibrohim Khasanov, Dilsabo Choriyeva, Muxtor Khalilov, Samar Ochilov, Sunatullo Badalov, et al.

    Efficient seedbed preparation under conservation-oriented tillage requires balanced aggregate fragmentation, surface microrelief and energy demand. This study investigated the influence of passive toothed roller parameters on soil fragmentation, surface roughness, draft force and fuel consumption during chisel tillage under medium-loam Calcisol conditions. Three configurations were compared: a chisel plow without a roller, with a slat roller and with a toothed roller. An analytical framework describing aggregate capture, tooth–soil contact frequency and resistance formation was combined with field experiments and regression-based response surface analysis. The toothed roller improved measured soil treatment indicators compared with the no-roller and slat-roller configurations due to discrete tooth–soil interaction, localized stress concentration and repeated loading of loosened aggregates. Rational parameter ranges were identified: a roller diameter of 0.45–0.46 m, 13–15 teeth, transverse spacing of 8.0–8.6 cm, a tooth height of 7.5–8.5 cm and specific load of 0.9–1.1 kN m−1. Under the selected configuration, aggregates smaller than 50 mm increased from 76.1% to 88.0%, surface roughness decreased from 6.8 to 3.7 cm and residue retention remained above 60%. Fuel consumption increased to 28.4–28.5 L ha−1, reflecting the additional energetic cost of fragmentation and levelling. The approach supports rational selection of passive toothed roller parameters under the tested conditions.


  • Open Access

    Optimization of Leveler–Compactor Parameters in Combined Strip Tillage for Soil Preparation Under Plastic Film for Melon Crops

    by Yurii Syromiatnykov, Farmon Mamatov, Khayriddin Fayzullaev, Fakhridin Karshiev, Dustmurod Chuyanov, Eshpulat Eshdavlatov, Ibrat Ismailov, Isroil Temirov, Akmal Eshdavlatov, Laziz Gulomov, et al.

    Strip tillage combined with plastic film mulching is widely used to improve moisture conservation and crop productivity in arid and semi-arid regions; however, the quality of a prepared strip strongly depends on the secondary leveling and compaction of the loosened soil. The aim of this study was to substantiate the design and operating parameters of a skid-type leveler–compactor integrated into a combined machine for one-pass pre-sowing soil preparation of rainfed land with the simultaneous laying of drip irrigation hoses and plastic film for melon crops. The research combined theoretical modeling of soil–tool interaction with single-factor and multifactor field experiments and a two-year agronomic evaluation under farmer field conditions. The optimal parameter ranges were 24.0–26.0° for the lower compacting element, 151–155° for the upper leveling part, and 24.3–27.0 cm for the tool height. Under these conditions, the proposed system ensured a soil fraction < 25 mm of 87.2%, surface irregularities of 1.34 cm, and reduced fuel consumption, from 38.6 to 26.3 kg ha−1, compared with the conventional method. The field emergence increased to 91.6%, the total yield reached 50.7 t ha−1, and the water use efficiency increased to 17.4–18.9 kg m−3. The results demonstrate that optimization of the leveler–compactor significantly improves strip quality, agronomic performance, and resource use efficiency in melon production under plastic film.