Oleg Petruchenko
Oleg Petruchenko has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yuliya Chunyak
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
4 shared publications - Vadim Lobodzinskiy
Національний технічний університет України ”Київський політехнічний інститут імені Ігоря Сікорського
3 shared publications - Vladislav Mihaylenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications - Olga Illina
Національний технічний університет України ”Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications - Vadym Svyatnenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
2 shared publications - Andrii Petruchenko
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine
1 shared publication
Latest Publications
- Open Access
- 20 June 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 53,p. 161-169
ECONOMIC EFFICIENCY OF AI IMPLEMENTATION IN ELECTRICAL EQUIPMENT DIAGNOSTICS AND MAINTENANCE
A comprehensive assessment of the economic efficiency of implementing artificial intelligence (AI) in the diagnostics and maintenance of electrical equipment was conducted. Key advantages and potential risks of such integration were identified, and a methodology for quantitatively evaluating the economic benefits from optimizing technical maintenance and reducing accident rates was developed. A methodological approach involving a comparative analysis of traditional and AI-enhanced models was applied. The economic evaluation included calculating reductions in downtime, inventory optimization, decreased repair costs, extended equipment lifespan, and AI implementation costs. A sensitivity analysis was conducted, and recommendations were developed. The results demonstrate that AI implementation shows a significant positive economic effect. Maintenance cost reduction reaches 20-30%, and downtime reduction is 15-25%. The reliability and safety of the electric power system are enhanced, and inventory management is optimized. Equipment lifespan increases by 10-15%, and the investment payback period ranges from 1.5-3 years. The study concludes that the implementation of AI in the diagnostics and maintenance of electrical equipment is economically justified. AI technologies enable a shift to predictive strategies, reducing operational costs, minimizing downtime, increasing reliability, and extending equipment lifespan. The necessity for further research on standardization and integration of AI solutions is emphasized.
- 20 June 2025
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 53,p. 161-169
Open AccessECONOMIC EFFICIENCY OF AI IMPLEMENTATION IN ELECTRICAL EQUIPMENT DIAGNOSTICS AND MAINTENANCE
A comprehensive assessment of the economic efficiency of implementing artificial intelligence (AI) in the diagnostics and maintenance of electrical equipment was conducted. Key advantages and potential risks of such integration were identified, and a methodology for quantitatively evaluating the economic benefits from optimizing technical maintenance and reducing accident rates was developed. A methodological approach involving a comparative analysis of traditional and AI-enhanced models was applied. The economic evaluation included calculating reductions in downtime, inventory optimization, decreased repair costs, extended equipment lifespan, and AI implementation costs. A sensitivity analysis was conducted, and recommendations were developed. The results demonstrate that AI implementation shows a significant positive economic effect. Maintenance cost reduction reaches 20-30%, and downtime reduction is 15-25%. The reliability and safety of the electric power system are enhanced, and inventory management is optimized. Equipment lifespan increases by 10-15%, and the investment payback period ranges from 1.5-3 years. The study concludes that the implementation of AI in the diagnostics and maintenance of electrical equipment is economically justified. AI technologies enable a shift to predictive strategies, reducing operational costs, minimizing downtime, increasing reliability, and extending equipment lifespan. The necessity for further research on standardization and integration of AI solutions is emphasized.
- 17 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-FIVE-ZONE VOLTAGE REGULATION AND ACTIVE-INDUCTIVE LOAD
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- 17 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-FIVE-ZONE VOLTAGE REGULATION AND ACTIVE-INDUCTIVE LOAD
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- Open Access
- 19 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-ZONE VOLTAGE REGULATION ANDACTIVE-INDUCTIVE LOAD
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- 19 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
Open AccessANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-ZONE VOLTAGE REGULATION ANDACTIVE-INDUCTIVE LOAD
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- Open Access
- 22 June 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
IMPACT OF THE SMART GRID SYSTEM ON THE NATIONAL ENERGY NETWORK
Modern power system technologies offer the integration of renewable energy in electricity grids, intelligent metering, bidirectional communication between power generation units and the central control system for energy production and consumption, prevention of power outages, sustainable and safe energy sources, and energy security. Moreover, the modern energy system requires control, measurement and cybersecurity of energy processes at every point of the grid. The infrastructure of the national networks of many countries is very old and includes classic technologies of production, transmission and distribution of electricity. In addition, the controllability and managebility of these systems are also unsatisfactory. On the other hand, Smart Grid technologies include sophisticated tools to monitor and control the power system in both directions from power plants to end users or vice versa so that vulnerabilities can be identified in advance and the necessary measures taken. In addition, the smart grid system offers monitoring and management of electricity from production to the end user, as well as provides smart accounting, integration of renewable energy into the grid. Morover, the efficient use of energy sources with minimal losses and minimal illegal use is also addressed in smart grid technology. This article highlights the impact of smart grid technologies on national power grids and offers some useful suggestions for transforming their classic power grid system into a Smart Grid grid system. Transforming the classic network into an intelligent one fills its own business areas and provides increased efficiency, loss reduction, flexible price for consumers, safe and stable electricity, as well as reliable and digital infrastructure. As a result, building a Smart Grid is a complex task, starting with a detailed quantification of system requirements, determining the actual goals and the levels of operation needed to achieve them. This research will be an effective and efficient tool for researchers, engineers, transmitter operators and distributors to transform the classical national energy system into an intelligent energy system.
- 22 June 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1
Open AccessIMPACT OF THE SMART GRID SYSTEM ON THE NATIONAL ENERGY NETWORK
Modern power system technologies offer the integration of renewable energy in electricity grids, intelligent metering, bidirectional communication between power generation units and the central control system for energy production and consumption, prevention of power outages, sustainable and safe energy sources, and energy security. Moreover, the modern energy system requires control, measurement and cybersecurity of energy processes at every point of the grid. The infrastructure of the national networks of many countries is very old and includes classic technologies of production, transmission and distribution of electricity. In addition, the controllability and managebility of these systems are also unsatisfactory. On the other hand, Smart Grid technologies include sophisticated tools to monitor and control the power system in both directions from power plants to end users or vice versa so that vulnerabilities can be identified in advance and the necessary measures taken. In addition, the smart grid system offers monitoring and management of electricity from production to the end user, as well as provides smart accounting, integration of renewable energy into the grid. Morover, the efficient use of energy sources with minimal losses and minimal illegal use is also addressed in smart grid technology. This article highlights the impact of smart grid technologies on national power grids and offers some useful suggestions for transforming their classic power grid system into a Smart Grid grid system. Transforming the classic network into an intelligent one fills its own business areas and provides increased efficiency, loss reduction, flexible price for consumers, safe and stable electricity, as well as reliable and digital infrastructure. As a result, building a Smart Grid is a complex task, starting with a detailed quantification of system requirements, determining the actual goals and the levels of operation needed to achieve them. This research will be an effective and efficient tool for researchers, engineers, transmitter operators and distributors to transform the classical national energy system into an intelligent energy system.
- Open Access
- 17 January 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
INVERTER MATHEMATICAL MODEL THREE-PHASE VOLTAGE TO DC WITH SIXTEEN ZONE REGULATION VOLTAGE
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- 17 January 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
Open AccessINVERTER MATHEMATICAL MODEL THREE-PHASE VOLTAGE TO DC WITH SIXTEEN ZONE REGULATION VOLTAGE
Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.
- Open Access
- 25 June 2021
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 6,p. 135-148
FEATURES OF TRANSIENT RESEARCH IN THREE-PHASE HIGH-VOLTAGE POWER TRANSMISSION CABLE LINES
The methods of analysis of transients in three-phase circuits with distributed parameters and interphase connections are considered on the basis of representation of such circuits by multipoles, finding their corresponding concentrated parameters and determination of boundary and initial conditions of transients. The formulation of this scientific problem is justified by the current trend in theoretical electrical engineering to consider multiphase circuits as a series-parallel connection of different n-poles, which improves the calculation of transient electromagneticprocesses in multiphase circuits with distributed parameters and interphase connections. Using thetheory of multipoles allows us to represent the elements of the electric circuit by macromodels thatreflect their external connections and the impact on the rest of the circuit. The main difficulty inapplying this principle is to resolve emerging electromagnetic bonds.
- 25 June 2021
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 6,p. 135-148
Open AccessFEATURES OF TRANSIENT RESEARCH IN THREE-PHASE HIGH-VOLTAGE POWER TRANSMISSION CABLE LINES
The methods of analysis of transients in three-phase circuits with distributed parameters and interphase connections are considered on the basis of representation of such circuits by multipoles, finding their corresponding concentrated parameters and determination of boundary and initial conditions of transients. The formulation of this scientific problem is justified by the current trend in theoretical electrical engineering to consider multiphase circuits as a series-parallel connection of different n-poles, which improves the calculation of transient electromagneticprocesses in multiphase circuits with distributed parameters and interphase connections. Using thetheory of multipoles allows us to represent the elements of the electric circuit by macromodels thatreflect their external connections and the impact on the rest of the circuit. The main difficulty inapplying this principle is to resolve emerging electromagnetic bonds.
- Open Access
- 27 April 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
ANALYSIS OF THE INFLUENCE OF ENERGY EFFICIENT HEATING MODES ON BUILDINGS ENERGY USE BASING ON THE MATHEMATICAL MODELING
Global trends of increasing the buildings energy efficiency are aimed at reducing energy use to nearly zero consumption (nZEB). Achieving the nZEB level requires the implementation of a set energy-saving measures to improve the thermophysical properties of fences, building engineering systems and the use of renewable energy sources. One of low-cost and energy-efficient measures to increase the level of energy efficiency of buildings is the introduction of energy-efficient intermittent heating modes of buildings. Usually, this measure is appropriate and possible after the thermal modernization of the building. Determining the energy performance of buildings for the introduction of intermittent heating modes requires the use of mathematical models. The paper compares the application of different mathematical models and methods for estimating thermal energy savings in thermal modernization and implementation of intermittent heating modes based on the quasi-stationary model according to DSTU B A.2.2-12: 2015, stadium model created on the basis of RETScreen software and dynamic model 5R1C according to EN ISO 13790 and EN 13786. Heat-accumulation properties of building enclosures in RETScreen are not taken into account, in DSTU B A.2.2-12: 2015 - are taken into account for external enclosures, 5R1C - both internal and external enclosures are taken into account. The calculation was made for a residential building and a gymnasium located in the city of Kyiv. The introduction of a set of measures for thermal modernization of building fences will reduce heat consumption by 60 and 35% for residential building reinforced and gymnasiums, respectively. Introduction of intermittent heating modes for buildings after thermal modernization / modern buildings allows to save on heating more than 15% - determined on the basis of RETScreen program, 10% - on the basis of dynamic grid model 5R1C, 22% - on the basis of quasi-stationary method according to DSTU B A.2.2- 12: 2015, for a residential building and a gymnasium building located in Kyiv.
- 27 April 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
Open AccessANALYSIS OF THE INFLUENCE OF ENERGY EFFICIENT HEATING MODES ON BUILDINGS ENERGY USE BASING ON THE MATHEMATICAL MODELING
Global trends of increasing the buildings energy efficiency are aimed at reducing energy use to nearly zero consumption (nZEB). Achieving the nZEB level requires the implementation of a set energy-saving measures to improve the thermophysical properties of fences, building engineering systems and the use of renewable energy sources. One of low-cost and energy-efficient measures to increase the level of energy efficiency of buildings is the introduction of energy-efficient intermittent heating modes of buildings. Usually, this measure is appropriate and possible after the thermal modernization of the building. Determining the energy performance of buildings for the introduction of intermittent heating modes requires the use of mathematical models. The paper compares the application of different mathematical models and methods for estimating thermal energy savings in thermal modernization and implementation of intermittent heating modes based on the quasi-stationary model according to DSTU B A.2.2-12: 2015, stadium model created on the basis of RETScreen software and dynamic model 5R1C according to EN ISO 13790 and EN 13786. Heat-accumulation properties of building enclosures in RETScreen are not taken into account, in DSTU B A.2.2-12: 2015 - are taken into account for external enclosures, 5R1C - both internal and external enclosures are taken into account. The calculation was made for a residential building and a gymnasium located in the city of Kyiv. The introduction of a set of measures for thermal modernization of building fences will reduce heat consumption by 60 and 35% for residential building reinforced and gymnasiums, respectively. Introduction of intermittent heating modes for buildings after thermal modernization / modern buildings allows to save on heating more than 15% - determined on the basis of RETScreen program, 10% - on the basis of dynamic grid model 5R1C, 22% - on the basis of quasi-stationary method according to DSTU B A.2.2- 12: 2015, for a residential building and a gymnasium building located in Kyiv.