VMVladislav Mihaylenko

Vladislav Mihaylenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vladislav Mihaylenko has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    STUDY OF PROCESSES IN CONVERTER WITH TWENTY-TWO-ZONE VOLTAGE REGULATION

    by Vladyslav Mihaylenko, Yalia Chunyak, Mykola Bragynets, Mykhailo Rybovalov, Olexander Khramtsov

    In this work, modeling of electrical processes in electrical circuits with semiconductor elements was performed. New mathematical models were obtained for various cases in three-phase circuits in semiconductor switches with multi-link zone control of phase voltages, assuming energy losses to be absent in semiconductor devices for a quick assessment of the influence of load characteristics on the value and type of output voltage. A computer model was built to study electromagnetic processes in semiconductor switches for pulse-width control of output voltage. Diagrams illustrating electromagnetic processes in electrical circuits are shown. The work allows for the development of the method of multiparametric functions using the creation of various mathematical objects and finding characteristics and expressions for research on various components of electromagnetic phenomena in various electrical circuits in the presence of semiconductor components and areas with sinusoidal, constant and pulsed voltages. Semiconductor components usually perform high-frequency pulse conversion of electrical circuit structures and pulse-width modeling of both phase and linear voltages of a three-phase power supply network, changing the voltages of output semiconductor devices of various parameters of electrical energy. Mathematical model of the semiconductor converter is also used for study of the connecting processes in semiconductor converter with actively-inductive load. Thanks to this method, it becomes possible to analyze each process separately according to its sinusoidal, constant, and pulse components, even in rather complex circuits with semiconductor commutators. The semiconductor commutators themselves play a key role by allowing rapid, high-frequency changes in the circuit structure and performing pulse-width modulation of the phase and line voltages of a three-phase power network. This makes it possible to regulate the output voltage of modern semiconductor power converters efficiently and with high precision.

  • Open Access

    Study of a converter with six-channel voltage regulation and electrical mechanical loading

    by Vladislav Mikhaylenko, Julia Chuniak, Mykola Braginets, Mikhail Rybovalov

    In this work, modeling of electrical processes in electrical circuits with semiconductor elements was performed. New mathematical models were obtained for various cases in three-phase circuits in semiconductor switches with multi-link zone control of phase voltages, assuming energy losses to be absent in semiconductor devices for a quick assessment of the influence of load characteristics on the value and type of output voltage. A computer model was built to study electromagnetic processes in semiconductor switches for pulse-width control of output voltage. Diagrams illustrating electromagnetic processes in electrical circuits are shown. The work allows for the development of the method of multiparametric functions using the creation of various mathematical objects and finding characteristics and expressions for research on various components of electromagnetic phenomena in various electrical circuits in the presence of semiconductor components and areas with sinusoidal, constant and pulsed voltages. Semiconductor components usually perform high-frequency pulse conversion of electrical circuit structures and pulse-width modeling of both phase and linear voltages of a three-phase power supply network, changing the voltages of output semiconductor devices of various parameters of electrical energy. Mathematical model of the semiconductor converter is also used for study of the connecting processes in semiconductor converter with actively-inductive load. The mathematical model of the converter is created for six zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created.

  • RESEARCH ON TRANSIENT ELECTROMAGNETIC PROCESSES IN THREE-PHASE CIRCUITS WITH DISTRIBUTED PARAMETERS AND ELECTROMAGNETIC COUPLINGS

    by Vadym Lobodzynskyi, Mykola Buryk, Vladislav Mihaylenko, Andrii Petruchenko, Yevhenii Krymus

    Background. The article considers the current challenge in analyzing transient phenomena in high-voltage cable transmission lines with distributed parameters. With an increase in the operating voltage and length of such lines, the importance of accurate calculation and limitation of switching overvoltages increases, which is critical for ensuring the reliability and stability of the power system. Traditional calculation methods are often insufficient for complex systems considering mutual induction and distributed parameters, requiring the use of modern computer technologies and numerical methods. Objective. The purpose of this work is to assess wave attenuation during propagation in cable transmission lines to solve the problems of limiting lightning and switching overvoltages. The study is carried out on the example of the propagation of a rectangular voltage pulse, which allows modeling the impact of transients caused by switching and emergency modes on the cable line. Methods. Mathematical modeling based on differential equations was used to analyze voltage pulse propagation in a cable line. The equations are solved using the frequency method and numerical methods, in particular, numerical integration techniques. A two-channel system (α- and 0-channels) for a symmetrical cable line is considered to allow for the study of the influence of frequency on the characteristics of wave propagation. Results. Modeling results demonstrate the frequency dependence of propagation velocity and wave attenuation coefficients. Analysis of the pulse shape after passing a certain distance along the line reveals the similarity of distortions in the α- and 0-channels. This indicates a relatively small mutual influence between the phases, explained by the proximity of the return conductor (ground) to the current-carrying conductors of the cable. Conclusions. This study confirms the possibility of simplified analysis of overvoltages on the conductor-shield insulation without considering the interaction between the phases of the cable transmission lines. However, the analysis of overvoltages on the shield-ground insulation requires taking into account the mutual influence of processes in the shield-ground phase circuits. These results are important for developing effective methods of protection against overvoltages and ensuring reliable operation of high-voltage cable transmission lines.

  • Open Access

    Identifying mechanisms behind crack formation and destruction of the damper winding of a capsule-type hydrogenerator in the presence of static rotor eccentricity

    by Olexandr Geraskin, Yurii Haidenko, Vadim Chumack, Vladislav Mihaylenko, Yevhenii Trotsenko

    This study investigates a capsule-type SGK 538/160–70M hydrogenerator with a rated power of 23 MVA. The task addressed relates to crack initiation and failure of the damper winding in the hydrogenerator in the presence of rotor static eccentricity. A three-dimensional field-based mathematical model of the electromagnetic-thermal-mechanical interaction has been constructed to evaluate the distributions of currents, temperatures, and thermomechanical stresses in the damper winding segment and in the brazed joints of rods. It is shown that the occurrence and evolution of rotor static eccentricity constitute one of the essential causes of catastrophic damages and failures in hydrogenerators of this type. It has been determined that, under rotor static eccentricity of ε = 0.83, the local stresses in the joint of the central rod increase by a factor of ~3.2 (up to ≈ 540 MPa). This value exceeds the tensile strength of copper and explains rod ruptures and avalanche-type failure of the segment. In addition, it was established that the existence and localization of cracks in brazed joints significantly affect the bending (deformation) behavior of the pole damper winding segment. The results could be applied to estimate the service life and to upgrade large slow-speed synchronous hydrogenerators (including capsule types). Specifically, under the following conditions: a) existing or expected eccentricities; b) high thermal gradients in the end/short-circuiting parts of the damper winding; c) operation with frequent starts/stops or cooling modes close to limiting values. The effective engineering measures that have been proposed, such as improving the mobility of rods in slots; revising the number and diameters of rods; applying high-strength materials, could be implemented in retrofitting projects and when repairing the rotor

  • Open Access

    Mathematical model of a converter with four-channel voltage regulation and electrical mechanical loading

    by Vladislav Mikhaylenko, Julia Chuniak, Andrii Pinda, Юлія Чуняк, Андрій Пінда

    This paper presents an in-depth analysis of electromagnetic processes occurring in electrical circuits that utilize semiconductor switching devices. New mathematical models are proposed to describe the behavior of electromagnetic processes in three-phase electrical systems of semiconductor converters employing multi-channel zonal phase voltage control. These models intentionally neglect energy losses in the switching components to enable a fast and practical evaluation of how different load parameters affect both the magnitude and waveform of the output voltage. Additionally, a mathematical model is developed to investigate the behavior of semiconductor converters that use pulse-width modulation (PWM) for output voltage regulation. The article includes graphical results that illustrate the dynamic nature of electromagnetic processes in such electrical circuits. The research is also aimed at advancing the method of multi-parameter modulating functions by constructing novel mathematical models and defining corresponding functional and algorithmic equations. These tools are intended for analyzing electromagnetic phenomena in complex, branched electrical circuits with a modular structure. The focus is placed on subsystems that incorporate semiconductor switches and circuit segments exposed to sinusoidal, constant (DC), and pulsed voltage sources. Semiconductor switches in such systems are capable of performing high-frequency changes in circuit topology and implementing PWM of both phase and line voltages in a three-phase power supply network. This capability enables the precise regulation of output voltage characteristics in semiconductor-based power conversion systems according to specific operational requirements. The models and methods developed in this paper provide a theoretical basis for improving the efficiency and adaptability of electrical energy conversion systems, especially under varying load conditions and modulation schemes. Overall, the study supports the design and analysis of advanced converter systems used in modern power electronics, where high-performance control of electrical parameters is essential.

  • ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-FIVE-ZONE VOLTAGE REGULATION AND ACTIVE-INDUCTIVE LOAD

    by Vladislav Mihaylenko, Vadym Svyatnenko, Yuliya Chunyak, Oleg Petruchenko, Dmytro Oznamets, Vitalii Voitiuk

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-ZONE VOLTAGE REGULATION ANDACTIVE-INDUCTIVE LOAD

    by Vladislav Mihaylenko, Vadym Svyatnenko, Yuliya Chunyak, Oleg Petruchenko, Olexandr Geraskin, Konstantyn Trubitsyn, Mykola Kovalevskiy

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    DEPENDENCE OF DYNAMIC CHARACTERISTICS OF PULSE CURRENTS OF ELECTRICAL DISCHARGE INSTALLATIONS ON THE DISTANCE OF THEIR TECHNOLOGICAL LOAD

    by А.а. Shcherba, Н.і. Супруновська, М.а. Shcherba, S.S. Roziskulov, V.V. Mihaylenko

    The paper investigates the influence of the distant technological load from electric discharge installations (EDIs) with capacitive storage of electricity on the dynamic characteristics of impulse currents in the load. On the basis of experi-mental studies, the peculiarities of changing the dynamic characteristics of EDIs, such as the average rate of rise and fall of their output pulse current during the implementation of volumetric spark dispersion of a layer of metal granules in dielectric liquids between electrodes, were determined. The influence of the length of such types of connecting con-ductors as twisted pair, coaxial cable, and litzendraht with bifilar winding of current-carrying conductors on the output dynamic characteristics of the EDI was analyzed. A significant influence of the type of connecting conductors of con-siderable length on the indicated characteristics has been established, especially in the case of a low-inductance of the load circuit of the EDI. It is substantiated that when the technological load is significantly distant (several meters) from the EDI, it is quite appropriate to use power cables with solid polymer electrical insulation as connecting conductors of the coaxial type. Ref. 10, fig. 2, tables 2.


  • Open Access

    INVERTER MATHEMATICAL MODEL THREE-PHASE VOLTAGE TO DC WITH SIXTEEN ZONE REGULATION VOLTAGE

    by V.V. Mihaylenko, V.A. Sviatnenko, J.M. Chunyak, O.V. Petruchenko, V.I. Bachinskiy

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    Analysis of processes in converter with eleven zone regulation output voltage

    by V. Mihaylenko, J. Chunyak, V. Bachinskiy

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator . Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for eleven zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub- system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width- pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.