YCYuliya Chunyak

Yuliya Chunyak

*This is an algorithmically generated author record based on publicly available information.

Yuliya Chunyak has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    STUDY OF PROCESSES IN CONVERTER WITH TWENTY-TWO-ZONE VOLTAGE REGULATION

    by Vladyslav Mihaylenko, Yalia Chunyak, Mykola Bragynets, Mykhailo Rybovalov, Olexander Khramtsov

    In this work, modeling of electrical processes in electrical circuits with semiconductor elements was performed. New mathematical models were obtained for various cases in three-phase circuits in semiconductor switches with multi-link zone control of phase voltages, assuming energy losses to be absent in semiconductor devices for a quick assessment of the influence of load characteristics on the value and type of output voltage. A computer model was built to study electromagnetic processes in semiconductor switches for pulse-width control of output voltage. Diagrams illustrating electromagnetic processes in electrical circuits are shown. The work allows for the development of the method of multiparametric functions using the creation of various mathematical objects and finding characteristics and expressions for research on various components of electromagnetic phenomena in various electrical circuits in the presence of semiconductor components and areas with sinusoidal, constant and pulsed voltages. Semiconductor components usually perform high-frequency pulse conversion of electrical circuit structures and pulse-width modeling of both phase and linear voltages of a three-phase power supply network, changing the voltages of output semiconductor devices of various parameters of electrical energy. Mathematical model of the semiconductor converter is also used for study of the connecting processes in semiconductor converter with actively-inductive load. Thanks to this method, it becomes possible to analyze each process separately according to its sinusoidal, constant, and pulse components, even in rather complex circuits with semiconductor commutators. The semiconductor commutators themselves play a key role by allowing rapid, high-frequency changes in the circuit structure and performing pulse-width modulation of the phase and line voltages of a three-phase power network. This makes it possible to regulate the output voltage of modern semiconductor power converters efficiently and with high precision.

  • Open Access

    Study of a converter with six-channel voltage regulation and electrical mechanical loading

    by Vladislav Mikhaylenko, Julia Chuniak, Mykola Braginets, Mikhail Rybovalov

    In this work, modeling of electrical processes in electrical circuits with semiconductor elements was performed. New mathematical models were obtained for various cases in three-phase circuits in semiconductor switches with multi-link zone control of phase voltages, assuming energy losses to be absent in semiconductor devices for a quick assessment of the influence of load characteristics on the value and type of output voltage. A computer model was built to study electromagnetic processes in semiconductor switches for pulse-width control of output voltage. Diagrams illustrating electromagnetic processes in electrical circuits are shown. The work allows for the development of the method of multiparametric functions using the creation of various mathematical objects and finding characteristics and expressions for research on various components of electromagnetic phenomena in various electrical circuits in the presence of semiconductor components and areas with sinusoidal, constant and pulsed voltages. Semiconductor components usually perform high-frequency pulse conversion of electrical circuit structures and pulse-width modeling of both phase and linear voltages of a three-phase power supply network, changing the voltages of output semiconductor devices of various parameters of electrical energy. Mathematical model of the semiconductor converter is also used for study of the connecting processes in semiconductor converter with actively-inductive load. The mathematical model of the converter is created for six zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created.

  • Open Access

    Аналіз електромагнітних процесів в перетворювачі з восьмизонним регулюванням напруги

    by В. Михайленко, Ю. Чуняк, М. Брагинець

    У статті проведено аналіз електромагнітних процесів в електричних колах з напівпровідниковими комутаторами. Створено математичну модель перетворювача з восьмизонним регулюванням вихідної напруги для аналізу електромагнітних процесів у напівпровідникових перетворювачах з широтно-імпульсним регулюванням. Наведено графіки, що відображають електромагнітні процеси у електричних колах. Математична модель напівпровідникового перетворювача також використовується для дослідження перехідних процесів у напівпровідникових перетворювачах з активно-індуктивним навантаженням. Розвинуто метод багатопараметричних функцій, які входять до алгоритмічних рівнянь аналізу усталених і перехідних процесів у розгалужених електричних колах з напівпровідниковими комутаторами і реактивними елементами, в напрямку урахування особливостей використання фазних і лінійних напруг мережі електроживлення. Розроблено нову математичну модель усталених і перехідних процесів у електричних колах напівпровідникових перетворювачів модуляційного типу з багатоканальним зонним використанням фазних напруг трифазної мережі живлення без урахування втрат електроенергії у комутаторах для швидкої оцінки впливу параметрів навантаження на характеристики регульованих синусоїдних і постійних напруг. Результати цієї роботи можна використати для розвитку методу багатопараметричних модулюючих функцій для спрощення аналізу перехідних процесів у електричних колах без врахуванням втрат у ключових елементах. Бібл. 4, іл. 3

  • Open Access

    Mathematical model of a converter with four-channel voltage regulation and electrical mechanical loading

    by Vladislav Mikhaylenko, Julia Chuniak, Andrii Pinda, Юлія Чуняк, Андрій Пінда

    This paper presents an in-depth analysis of electromagnetic processes occurring in electrical circuits that utilize semiconductor switching devices. New mathematical models are proposed to describe the behavior of electromagnetic processes in three-phase electrical systems of semiconductor converters employing multi-channel zonal phase voltage control. These models intentionally neglect energy losses in the switching components to enable a fast and practical evaluation of how different load parameters affect both the magnitude and waveform of the output voltage. Additionally, a mathematical model is developed to investigate the behavior of semiconductor converters that use pulse-width modulation (PWM) for output voltage regulation. The article includes graphical results that illustrate the dynamic nature of electromagnetic processes in such electrical circuits. The research is also aimed at advancing the method of multi-parameter modulating functions by constructing novel mathematical models and defining corresponding functional and algorithmic equations. These tools are intended for analyzing electromagnetic phenomena in complex, branched electrical circuits with a modular structure. The focus is placed on subsystems that incorporate semiconductor switches and circuit segments exposed to sinusoidal, constant (DC), and pulsed voltage sources. Semiconductor switches in such systems are capable of performing high-frequency changes in circuit topology and implementing PWM of both phase and line voltages in a three-phase power supply network. This capability enables the precise regulation of output voltage characteristics in semiconductor-based power conversion systems according to specific operational requirements. The models and methods developed in this paper provide a theoretical basis for improving the efficiency and adaptability of electrical energy conversion systems, especially under varying load conditions and modulation schemes. Overall, the study supports the design and analysis of advanced converter systems used in modern power electronics, where high-performance control of electrical parameters is essential.

  • ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-FIVE-ZONE VOLTAGE REGULATION AND ACTIVE-INDUCTIVE LOAD

    by Vladislav Mihaylenko, Vadym Svyatnenko, Yuliya Chunyak, Oleg Petruchenko, Dmytro Oznamets, Vitalii Voitiuk

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    ANALYSIS OF PROCESSES IN CONVERTER WITH TWENTY-ZONE VOLTAGE REGULATION ANDACTIVE-INDUCTIVE LOAD

    by Vladislav Mihaylenko, Vadym Svyatnenko, Yuliya Chunyak, Oleg Petruchenko, Olexandr Geraskin, Konstantyn Trubitsyn, Mykola Kovalevskiy

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    Control of electricity consumption regimes of producers consumers

    by Vasyl Kalinchyk, Vitaliy Pobigaylo, Vitaliy Kalinchyk, Aleksandr Meita, Uliya Chunyak

    The article investigates models and methods of complex control of power consumption modes. It is shown that the power shortage during peak hours makes it difficult to maintain a balance between generation and consumption capacity, which led to the need to impose restrictions on the electrical load of industrial consumers and the development of methods and tools to control power consumption. Moreover, the tasks of controlling the modes of active power consumption and reactive power compensation are closely related. It is shown that the following methods of power consumption management are currently known: instantaneous rate; at the ideal rate; management on the forecast value; control with the use of average power on a moving time interval ("moving window" method). Optimal control of power consumption system modes and reactive power modes for the relevant control period is based on the use of operational forecasting methods. Studies have shown that a positive role in improving the efficiency of optimization of power consumption modes can play and influencing its level of voltage control in the power supply system. In this regard, it is advisable to move to a comprehensive solution to the problem of power management, both through the management of consumers - regulators, and the impact on the voltage regimes of the power supply system. Static characteristics of changes in active and reactive powers from voltage changes in the power supply system are given. Solving the problem of obtaining static characteristics is possible as a result of active experiments; or based on the integration of static characteristics of individual electrical receivers. Focus on the second way is advisable with a limited number of different types of electrical receivers. However, in any case, it is necessary to determine the static characteristics of individual large consumers - regulators, disabling or enabling which can significantly affect the integrated static characteristics of the power supply. An approach to integrated management of power consumption modes is proposed, which consists in the fact that from the beginning of the controlled interval periodically formed real values of active and reactive electricity consumption, as well as voltage values at the controlled point of the network. Then the forecast of active and reactive energy consumption to the end of the controlled interval and the forecast of the average voltage level is determined, the deviation between the forecast and set power consumption is determined and, if the forecast value of power consumption exceeds the set. At the same time determine the possible changes in reactive power and, if necessary, control the capacitor banks. Experimental studies of the considered models are carried out. The structural scheme of the system of complex control and management of power consumption modes is given.

  • Open Access

    ADAPTIVE MODELS OF ELECTRIC LOAD FORECASTING OF PRODUCTION CONSUMERS

    by O.V. Meita, V.V. Kalinchyk, Yu.M. Chunyak

    The article investigates models and methods of electric load forecasting. It is shown that the following methods of power consumption control are currently known: instantaneous norm; at the ideal rate; management on the forecast value; control with the use of average power on a moving time interval ("moving window" method). It is shown that it is better to focus on those methods that are based on the study of forecast estimates, which are the source information for management decisions. The main requirements for real-time systems are: high accuracy of operational forecasting and simplicity of algorithms, which provides a minimum solution time; work in conditions of uncertain and insufficient information, ensuring the stability of management. The analysis of works devoted to the issues of forecasting the processes of power consumption management systems of industrial enterprises is carried out. It is shown that automated control systems have specific requirements for mathematical forecasting methods due to little study of the nature of the forecast parameter, small amount of reporting statistics and insufficient reliability of source information and most accurately meets such requirements, adaptive approach to method design. The adaptive approach allows to solve the problem of adequacy of the method of the object of forecasting and from the point of view of simplicity of realization and time of calculations in the first place it is necessary to put adaptive methods of forecasting and, first of all, the method of exponential smoothing. Exponential smoothing, considered in this paper as a predictive model, allows to identify the inadequacy of the model to the real process and to bring the estimate of the determined basis of the process closer to the real one, ie to reduce the prediction error. However, this requires time, which increases with increasing changes in the coefficients of the model. In this regard, there is a problem of regulating the reaction rate of the predicted model to changes in its coefficients. A number of methods of automatic adjustment of the smoothing parameter are considered and analyzed: the evolutionary method of adaptation, methods using the tracking signal, methods of adapting the parameter by, optimization using gradient smoothing. It is shown that the method of adaptation using the tracking signal is simple and especially valuable for modeling series with a short history. Due to its simplicity, this method is especially convenient where predictions are made using computer technology. Studies of this model of forecasting on statistical data obtained at various enterprises have shown that the model adapts to real data at step 4-6 of forecasting and then the forecast error does not exceed 2%. Analysis of adaptive forecasting models based on the method of exponential smoothing showed their high efficiency and good adaptability to changes in the process of electricity consumption. The greatest difficulty in forecasting are cases of abrupt changes in the development of the process. Abrupt changes in the process can lead to a violation of the previously existing qualitative relationships of the parameters of the projected system. If there is a jump, it is very important to assess whether the deviation is caused by an obstacle or whether it is due to a change in the predicted process. If the changes are caused by an obstacle, it must be filtered out. If the deviations are caused by a change in the model, then the current process data are of the greatest value. From the point of view of fast working off of abrupt change the model of exponential smoothing with high value of the smoothing parameter is rather effective. However, this model is highly susceptible to interference. To eliminate this circumstance, a modified procedure for correcting the parameters of the forecasting model is proposed. The procedure is based on the introduction of a logical operator, which is based on the analysis of inconsistencies in the forecasts and imposes additional restrictions on changes in the smoothing parameter and the values of the original statistics. Experimental studies of the considered models are carried out.

  • Open Access

    INVERTER MATHEMATICAL MODEL THREE-PHASE VOLTAGE TO DC WITH SIXTEEN ZONE REGULATION VOLTAGE

    by V.V. Mihaylenko, V.A. Sviatnenko, J.M. Chunyak, O.V. Petruchenko, V.I. Bachinskiy

    Analysis of the electromagnetic processes is organized beside this article in electric circuit with semiconductor commutator. Mathematical model is created for analysis electro-magnetic processes in semiconductor converter with width pulsed regulation of the output voltage. The broughted graphs, which reflect the electromagnetic processes in electric circuit. Method much parametric functions was used when performing calculation. The mathematical model of the converter is created for fifteen zoned regulations of the output voltage. Article is devoted to the development of a method of multi-parametric modulating functions by means of working out of new mathematical models and definition of functions and the algorithmic equations for the analysis on sub-system components of electromagnetic processes in electric circuits of variable structure with sinusoidal, direct and pulsing voltage. Introduction of functions with discrete parameters in the algorithmic equations for analysis of processes in circuits with semiconductor commutators simplifies modeling on subsystem components. The mathematical model of steady-state processes and transients in electric circuits of semiconductor converters of modulation type with multi-channel zonal use of phase and line voltages of a three-phase network of power supplies is developed. The mathematical model of electric circuits of thyristor shapers of electro-discharge pulses for the analysis and the matching of capacitors charging modes with decrease several times of electric resistance of technological load is also created. The obtained results have a great value for development theoretical electrical engineering in a direction of simplification of calculations of electromagnetic processes in electric circuits with semi-conductor converters of the electric power. The Electromagnetic processes in electric circuit under width-pulse regulation possible to analyse with use the algorithmic equations multivariable function, which argument are a system parameters semiconductor commutator, signal of control, phases to network of the power supply and time. Introduction multivariable function with discrete parameter in algorithmic equations of the analysis formed and connecting processes in electric circuit of the variable structure allows to reflect change of this structure under system components, simplifying modeling and analysis of such processes to account of the generalization of the got equations. Except specified correlations and diagrams designed model allows to analyse forms of the output voltages and current of the separate power modules.

  • Open Access

    FEATURES OF TRANSIENT RESEARCH IN THREE-PHASE HIGH-VOLTAGE POWER TRANSMISSION CABLE LINES

    by Vadim Lobodzinskiy, Valeriy Chybelis, Oleg Petruchenko, Olga Illina, Yuliya Chunyak, Viktoriia Babenko

    The methods of analysis of transients in three-phase circuits with distributed parameters and interphase connections are considered on the basis of representation of such circuits by multipoles, finding their corresponding concentrated parameters and determination of boundary and initial conditions of transients. The formulation of this scientific problem is justified by the current trend in theoretical electrical engineering to consider multiphase circuits as a series-parallel connection of different n-poles, which improves the calculation of transient electromagneticprocesses in multiphase circuits with distributed parameters and interphase connections. Using thetheory of multipoles allows us to represent the elements of the electric circuit by macromodels thatreflect their external connections and the impact on the rest of the circuit. The main difficulty inapplying this principle is to resolve emerging electromagnetic bonds.