Natalie Butz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Natalie Butz has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Yiannos Manoli
Department of Microsystems (IMTEK), Laboratory for Microelectronics, University of Freiburg, Freiburg im Breisgau, Germany
2 shared publications - Armin Taschwer
Hahn-Schickard, Villingen-Schwenningen, Germany
1 shared publication - Matthias Kuhl
Department of Microsystems (IMTEK), Laboratory for Microelectronics, University of Freiburg, Freiburg im Breisgau, Germany
1 shared publication - Sebastian Nessler
Department of Microsystems Engineering-IMTEK, Fritz Huettinger Chair of Microelectronics, University of Freiburg, 79110 Freiburg, Germany
1 shared publication - Utpal Kalita
Institute for High-Frequency and Communication Technology, University of Wuppertal, Wuppertal, Germany
1 shared publication
Latest Publications
- 13 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 68 (10) , 4013-4024
Active Charge Balancer With Adaptive 3.3 V to 38 V Supply Compliance for Neural Stimulators
Charge balancing has become a common key safety requirement of electrical stimulation systems. It reduces the risk of electrode dissolution and tissue damage, which might arise after unbalanced stimulation pulses. A CMOS integrated consequence-based active charge balancer is presented that instantaneously removes excess charges between two consecutive stimulation pulses. This balancer provides a highly adaptive power supply compliance from 3.3 V to 38 V, verified by measurements. In order to maintain the compensation behavior and efficacy over the entire supply range and to protect the active components at such high voltages, a quad-rail design is elaborated that overcomes the technological high voltage limitations of the employed 0.35 $\mu \text{m}$ CMOS process. The presented charge balancing circuit consists of a fully differential operational transconductance amplifier for monitoring and voltage level translation, as well as an advanced class-B stage as current driver, designed in accordance with the quad-rail concept. Further system flexibility is provided by incorporating three different compensation current limitations of $\pm 500~\mu \text{A}$ , $\pm 300~\mu \text{A}$ and $\pm 200~\mu \text{A}$ . Additionally, two safety limits of ±50 mV and ±100 mV have been adopted. The charge balancer is very power efficient, it only dissipates 6.3 $\mu \text{W}$ and 25 $\mu \text{W}$ , at 3.3 V and 38 V respectively.
- 13 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 68 (10) , 4013-4024
Active Charge Balancer With Adaptive 3.3 V to 38 V Supply Compliance for Neural Stimulators
Charge balancing has become a common key safety requirement of electrical stimulation systems. It reduces the risk of electrode dissolution and tissue damage, which might arise after unbalanced stimulation pulses. A CMOS integrated consequence-based active charge balancer is presented that instantaneously removes excess charges between two consecutive stimulation pulses. This balancer provides a highly adaptive power supply compliance from 3.3 V to 38 V, verified by measurements. In order to maintain the compensation behavior and efficacy over the entire supply range and to protect the active components at such high voltages, a quad-rail design is elaborated that overcomes the technological high voltage limitations of the employed 0.35 $\mu \text{m}$ CMOS process. The presented charge balancing circuit consists of a fully differential operational transconductance amplifier for monitoring and voltage level translation, as well as an advanced class-B stage as current driver, designed in accordance with the quad-rail concept. Further system flexibility is provided by incorporating three different compensation current limitations of $\pm 500~\mu \text{A}$ , $\pm 300~\mu \text{A}$ and $\pm 200~\mu \text{A}$ . Additionally, two safety limits of ±50 mV and ±100 mV have been adopted. The charge balancer is very power efficient, it only dissipates 6.3 $\mu \text{W}$ and 25 $\mu \text{W}$ , at 3.3 V and 38 V respectively.
- 18 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (8) , 2298-2310
A 22 V Compliant 56 ${\mu}$ W Twin-Track Active Charge Balancing Enabling 100% Charge Compensation Even in Monophasic and 36% Amplitude Correction in Biphasic Neural StimulatorsClosed-loop charge balancers make a considerable contribution to a safe and secure electrical stimulation and additionally present an alternative to bulky blocking capacitors. This CMOS-integrated, 22 V compliant Twin-Track active charge balancer accomplishes both instantaneous and long-term balanced conditions. Long-term charge balancing is achieved by a cause-based PI-controlled offset compensation of the remaining electrode voltage. A Gm of only 1.5 nS offers a large (8 ms) time constant with only a 12 pF capacitor and leads to the first integrated PI-controller for offset compensation in neural implants. Instantaneous autonomous balancing is realized by a second concept, the consequence-based Inter-Pulse Charge Control. It uses a class-B architecture to supply the compensation currents. Thus, no additional references are required to define the safety window of the remaining electrode voltage. It consumes 31.8 μW in the idle state, while the delivered output power can be as high as 11 mW. The two complementary approaches can be combined to one system, providing the opportunity to achieve a better performance. The system consumes 56 μW and features a 36% mismatch correction in biphasic stimuli amplitude, as well as an autonomous 100% charge removal at maximum compensation amplitudes of 500 μA, which makes it a suitable complement to monophasic stimulators.
- 18 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 53 (8) , 2298-2310
A 22 V Compliant 56 ${\mu}$ W Twin-Track Active Charge Balancing Enabling 100% Charge Compensation Even in Monophasic and 36% Amplitude Correction in Biphasic Neural StimulatorsClosed-loop charge balancers make a considerable contribution to a safe and secure electrical stimulation and additionally present an alternative to bulky blocking capacitors. This CMOS-integrated, 22 V compliant Twin-Track active charge balancer accomplishes both instantaneous and long-term balanced conditions. Long-term charge balancing is achieved by a cause-based PI-controlled offset compensation of the remaining electrode voltage. A Gm of only 1.5 nS offers a large (8 ms) time constant with only a 12 pF capacitor and leads to the first integrated PI-controller for offset compensation in neural implants. Instantaneous autonomous balancing is realized by a second concept, the consequence-based Inter-Pulse Charge Control. It uses a class-B architecture to supply the compensation currents. Thus, no additional references are required to define the safety window of the remaining electrode voltage. It consumes 31.8 μW in the idle state, while the delivered output power can be as high as 11 mW. The two complementary approaches can be combined to one system, providing the opportunity to achieve a better performance. The system consumes 56 μW and features a 36% mismatch correction in biphasic stimuli amplitude, as well as an autonomous 100% charge removal at maximum compensation amplitudes of 500 μA, which makes it a suitable complement to monophasic stimulators.