Johnny Kin On Sin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Johnny Kin On Sin has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Linhua Huang
Department of Electronic and Computer Engineering, Hong Kong University of Science and Technology, Hong Kong, China
5 shared publications - Xin Peng
Department of Electronic and Computer Engineering, Hong Kong University of Science and Technology, Hong Kong, China
5 shared publications - Yong Liu
Department of Electronic and Computer Engineering, The Hong Kong University of Science and Technology, Hong Kong
5 shared publications Naoto Fujishima
Fuji Electric Company Ltd., Matsumoto, Japan
3 shared publicationsTakashi Tsuji
Fuji Electric Company Ltd., Matsumoto, Japan
3 shared publicationsYuichi Onozawa
Fuji Electric Company Ltd., Matsumoto, Japan
3 shared publications
Latest Publications
- 19 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (9) , 4525-4531
Analysis and Characterization of the Punchthrough n-p-n Diode for Hard Switching Power Control Applications
In this article, analysis and characterization of a new punchthrough (PT) n-p-n diode are performed. Numerical analysis shows that the PT voltage $\textit{V}_{{\text{PT}}}$ and the p $^{{+}}$ width ratio are the critical parameters to control the hole injection efficiency of the PT n-p-n diode. As a result, a locally reduced carrier profile can be realized due to the existence of electron extraction. Experimental results show that the leakage current of the PT n-p-n diode at 400 K can be kept at a level similar to that of a conventional Self-adjusting P Emitter Efficiency Diode (SPEED) with a well-designed $\textit{V}_{{\text{PT}}}$ . In addition, a p $^{{+}}$ width ratio of 20% is optimal for a better peak reverse recovery current ( $\textit{I}_{{\text{rrm}}}$ ) and forward voltage ( $\textit{V}_{{\text{F}}}$ ) tradeoff relationship. Compared with SPEED, the PT n-p-n diode achieves a reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 21%) and minimized reverse recovery loss $\textit{E}_{{\text{rec}}}$ ( $-$ 18%) at a nominal current. It can realize a significantly reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 42%) even at a small current and a bus voltage of 800 V. Moreover, better reverse recovery performances of the PT n-p-n diode are maintained at 400 K.
- 19 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (9) , 4525-4531
Analysis and Characterization of the Punchthrough n-p-n Diode for Hard Switching Power Control Applications
In this article, analysis and characterization of a new punchthrough (PT) n-p-n diode are performed. Numerical analysis shows that the PT voltage $\textit{V}_{{\text{PT}}}$ and the p $^{{+}}$ width ratio are the critical parameters to control the hole injection efficiency of the PT n-p-n diode. As a result, a locally reduced carrier profile can be realized due to the existence of electron extraction. Experimental results show that the leakage current of the PT n-p-n diode at 400 K can be kept at a level similar to that of a conventional Self-adjusting P Emitter Efficiency Diode (SPEED) with a well-designed $\textit{V}_{{\text{PT}}}$ . In addition, a p $^{{+}}$ width ratio of 20% is optimal for a better peak reverse recovery current ( $\textit{I}_{{\text{rrm}}}$ ) and forward voltage ( $\textit{V}_{{\text{F}}}$ ) tradeoff relationship. Compared with SPEED, the PT n-p-n diode achieves a reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 21%) and minimized reverse recovery loss $\textit{E}_{{\text{rec}}}$ ( $-$ 18%) at a nominal current. It can realize a significantly reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 42%) even at a small current and a bus voltage of 800 V. Moreover, better reverse recovery performances of the PT n-p-n diode are maintained at 400 K.
- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 675-682
On-Resistance–Reliability Tradeoffs in Al₂O₃/LaAlO₃/SiO₂ Gate for SiC Power MOSFETs
On-resistance–reliability tradeoffs are investigated for SiC power MOSFETs using Al2O3/LaAlO3/SiO2 gate dielectrics. Due to the high gate capacitance, the Al2O3/LaAlO3/SiO2 gate device shows an improvement on the channel resistance ( ${R}_{\text {ch}}$ ) versus threshold voltage shift ( ${\Delta } {V}_{\text {th}}$ ) tradeoff compared to the SiO2 gate counterpart. Besides, the short-circuit withstand time of the Al2O3/LaAlO3/SiO2 gate device is 1.55 times longer than that of the SiO2 gate device, while the two devices have the same on-resistance. Furthermore, the predicted lifetime of the Al2O3/LaAlO3/SiO2 gate device is ten years at an effective electric field ( ${E}_{\text {eff}}$ ) of 4.8 MV/cm, which is comparable with the latest reported result of the SiO2 gate counterpart.
- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 675-682
On-Resistance–Reliability Tradeoffs in Al₂O₃/LaAlO₃/SiO₂ Gate for SiC Power MOSFETs
On-resistance–reliability tradeoffs are investigated for SiC power MOSFETs using Al2O3/LaAlO3/SiO2 gate dielectrics. Due to the high gate capacitance, the Al2O3/LaAlO3/SiO2 gate device shows an improvement on the channel resistance ( ${R}_{\text {ch}}$ ) versus threshold voltage shift ( ${\Delta } {V}_{\text {th}}$ ) tradeoff compared to the SiO2 gate counterpart. Besides, the short-circuit withstand time of the Al2O3/LaAlO3/SiO2 gate device is 1.55 times longer than that of the SiO2 gate device, while the two devices have the same on-resistance. Furthermore, the predicted lifetime of the Al2O3/LaAlO3/SiO2 gate device is ten years at an effective electric field ( ${E}_{\text {eff}}$ ) of 4.8 MV/cm, which is comparable with the latest reported result of the SiO2 gate counterpart.
- 9 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (1) , 204-208
Potential of the Amorphous Oxide Semiconductors for Heterogeneous Power Integration Applications
In the emerging heterogeneous power integration applications, the power devices have to be fabricated on metal/glass/organics. In this field, amorphous oxide semiconductors (AOSs) have being the dominant semiconductor material to fulfill the low-temperature fabrication requirement. In the AOSs, the theoretical tradeoff between specific $\biosc{on}$ -resistance ( $\textit{R}_{\biosc{on},\text{sp}}$ ) and breakdown voltage (BV) is discussed. It is found that the tradeoff is rather different from the situation in these commonly used single-crystal semiconductors. In the AOSs, under the one-dimensional condition, $\textit{R}_{\biosc{on},\text{sp}}$ is not proportional to ${\textbf{BV}^\textbf{2}}$ due to the unique charge carrier mobility dependence on the carrier concentration. An analytical model has been extracted to describe such dependence, and it is found that $\textit{R}_{\biosc{on},\text{sp}}$ is proportional to $\text{BV}^{\text{4}}$ . Moreover, it is revealed that under a two-dimensional condition, such as reduced surface field (RESURF) condition, a “heavily doped” drift region can be used, and the mobility degradation issue could be resolved.
- 9 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (1) , 204-208
Potential of the Amorphous Oxide Semiconductors for Heterogeneous Power Integration Applications
In the emerging heterogeneous power integration applications, the power devices have to be fabricated on metal/glass/organics. In this field, amorphous oxide semiconductors (AOSs) have being the dominant semiconductor material to fulfill the low-temperature fabrication requirement. In the AOSs, the theoretical tradeoff between specific $\biosc{on}$ -resistance ( $\textit{R}_{\biosc{on},\text{sp}}$ ) and breakdown voltage (BV) is discussed. It is found that the tradeoff is rather different from the situation in these commonly used single-crystal semiconductors. In the AOSs, under the one-dimensional condition, $\textit{R}_{\biosc{on},\text{sp}}$ is not proportional to ${\textbf{BV}^\textbf{2}}$ due to the unique charge carrier mobility dependence on the carrier concentration. An analytical model has been extracted to describe such dependence, and it is found that $\textit{R}_{\biosc{on},\text{sp}}$ is proportional to $\text{BV}^{\text{4}}$ . Moreover, it is revealed that under a two-dimensional condition, such as reduced surface field (RESURF) condition, a “heavily doped” drift region can be used, and the mobility degradation issue could be resolved.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 44 (1) , 108-111
A Fast and Soft Reverse Recovery Diode With a Punch-Through NPN Structure
A fast and soft reverse recovery diode with a Punch-Through (PT) NPN structure is proposed and experimentally demonstrated. The structure features a P-type Schottky contact, a PT-NPN region for electron extraction, and a trench region with the bottom surrounded by a P-layer. Compared with conventional Self-adjusting P Emitter Efficiency Diode (SPEED), the proposed PT-NPN diode provides a much larger softness factor S (+23%), a shorter reverse recovery time T rr (-5%), and a much reduced reverse recovery charge Q rr (-20%) at nominal current.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 44 (1) , 108-111
A Fast and Soft Reverse Recovery Diode With a Punch-Through NPN Structure
A fast and soft reverse recovery diode with a Punch-Through (PT) NPN structure is proposed and experimentally demonstrated. The structure features a P-type Schottky contact, a PT-NPN region for electron extraction, and a trench region with the bottom surrounded by a P-layer. Compared with conventional Self-adjusting P Emitter Efficiency Diode (SPEED), the proposed PT-NPN diode provides a much larger softness factor S (+23%), a shorter reverse recovery time T rr (-5%), and a much reduced reverse recovery charge Q rr (-20%) at nominal current.
- 21 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (4) , 704-706
A Novel Conformal Thick Oxide Technology for On-Chip High-Voltage Isolation
In this letter, a novel conformal thick oxide technology is proposed and demonstrated for on-chip high-voltage isolation. The proposed technology utilizes alternate deposition and oxidation of polysilicon to form thick high-quality conformal oxide with a reasonable process time. Experimental results show that breakdown voltages (BVs) as high as 4.19 kV can be achieved with double-side, 6- $\mu \text{m}$ -thick planar oxide layers formed using this technology. Excellent conformity was also observed inside deep silicon trenches. The double-side, silicon-embedded transformer (DSSET) fabricated using this isolation layer technology achieved an isolation capability of 1.84 kV.
- 21 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 12 (4) , 704-706
A Novel Conformal Thick Oxide Technology for On-Chip High-Voltage Isolation
In this letter, a novel conformal thick oxide technology is proposed and demonstrated for on-chip high-voltage isolation. The proposed technology utilizes alternate deposition and oxidation of polysilicon to form thick high-quality conformal oxide with a reasonable process time. Experimental results show that breakdown voltages (BVs) as high as 4.19 kV can be achieved with double-side, 6- $\mu \text{m}$ -thick planar oxide layers formed using this technology. Excellent conformity was also observed inside deep silicon trenches. The double-side, silicon-embedded transformer (DSSET) fabricated using this isolation layer technology achieved an isolation capability of 1.84 kV.
- 10 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 690-695
Static Performance and Threshold Voltage Stability Improvement of Al2O3/LaAlO3/SiO2Gate-Stack for SiC Power MOSFETs
Lateral metal–oxide–semiconductor field-effect transistors (MOSFETs) are fabricated on 4H-SiC utilizing deposited high- ${k}$ gate dielectrics. The high- ${k}$ gate-stack consists of thin nitrided SiO 2 and 40 nm of LaAlO 3 covered with a thin Al 2 O 3 cap. The high- ${k}$ gate MOSFET achieves a 40% reduction in channel resistance (at ${V}_{gs} = 15$ V) compared with that of the conventional SiO 2 gate MOSFET. In addition, bidirectional transfer characteristics of the high- ${k}$ gate MOSFET indicate slight hysteresis and show a superior threshold voltage stability compared to that of competitors, in a range of −15 V $\le {V}_{gs} \le16$ V under room and elevated temperatures. Therefore, the Al 2 O 3 /LaAlO 3 /SiO 2 gate-stack can provide both low on-resistance and good threshold voltage stability for SiC power MOSFETs.
- 10 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 690-695
Static Performance and Threshold Voltage Stability Improvement of Al2O3/LaAlO3/SiO2Gate-Stack for SiC Power MOSFETs
Lateral metal–oxide–semiconductor field-effect transistors (MOSFETs) are fabricated on 4H-SiC utilizing deposited high- ${k}$ gate dielectrics. The high- ${k}$ gate-stack consists of thin nitrided SiO 2 and 40 nm of LaAlO 3 covered with a thin Al 2 O 3 cap. The high- ${k}$ gate MOSFET achieves a 40% reduction in channel resistance (at ${V}_{gs} = 15$ V) compared with that of the conventional SiO 2 gate MOSFET. In addition, bidirectional transfer characteristics of the high- ${k}$ gate MOSFET indicate slight hysteresis and show a superior threshold voltage stability compared to that of competitors, in a range of −15 V $\le {V}_{gs} \le16$ V under room and elevated temperatures. Therefore, the Al 2 O 3 /LaAlO 3 /SiO 2 gate-stack can provide both low on-resistance and good threshold voltage stability for SiC power MOSFETs.
- Open Access
- 30 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 951-957
Simulation Study of 4H-SiC High-k Pillar MOSFET With Integrated Schottky Barrier Diode
A SiC high-k (HK) split-gate (SG) MOSFET is proposed with a Schottky barrier diode (SBD) integrated between the split gates, and is investigated by numerical TCAD simulation. Results show that it has the same breakdown voltage as the SiC high-k (HK) MOSFET with an optimized and practical k value of 30 for its insulation pillar, which results in the highest breakdown voltage (1857 V). The forward voltage (VF) and reverse recovery charge (QRR) of the device are 0.9 V and 3.49 μC/cm2 respectively, much lower than those of the SiC HK MOSFET due to the SBD. Moreover, lower reverse transfer capacitance (CRSS), smaller gate charge (QG), and smaller gate-to-drain charge (QGD) are achieved for the proposed device because of the split-gates, leading to much lower switching power loss when compared with the SiC HK MOSFET. All these results indicate that the SiC HK SG-MOSFET has promising potential in future power electronics applications.
- 30 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 951-957
Open AccessSimulation Study of 4H-SiC High-k Pillar MOSFET With Integrated Schottky Barrier Diode
A SiC high-k (HK) split-gate (SG) MOSFET is proposed with a Schottky barrier diode (SBD) integrated between the split gates, and is investigated by numerical TCAD simulation. Results show that it has the same breakdown voltage as the SiC high-k (HK) MOSFET with an optimized and practical k value of 30 for its insulation pillar, which results in the highest breakdown voltage (1857 V). The forward voltage (VF) and reverse recovery charge (QRR) of the device are 0.9 V and 3.49 μC/cm2 respectively, much lower than those of the SiC HK MOSFET due to the SBD. Moreover, lower reverse transfer capacitance (CRSS), smaller gate charge (QG), and smaller gate-to-drain charge (QGD) are achieved for the proposed device because of the split-gates, leading to much lower switching power loss when compared with the SiC HK MOSFET. All these results indicate that the SiC HK SG-MOSFET has promising potential in future power electronics applications.
- 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (9) , 4801-4804
A High-Efficiency Double-Side Silicon- Embedded Inductor for Integrated DC–DC Converter Applications
In this brief, a novel double-side silicon-embedded coreless inductor is proposed and demonstrated for integrated dc-dc converter applications. The inductor has double-side thick windings embedded into the silicon substrate and connected in parallel. Extremely large effective metal thickness of 300 μm can, therefore, be achieved. Consequently, the 0.8 mm 2 inductor fabricated shows a low dc resistance of 42 mΩ. A large inductance to dc resistance ratio of 0.4 nH/ mΩ is then achieved with an inductance over 16.1 nH. The calculated peak effective inductor efficiency is 96.1% for 1.8-0.85 V, 100 MHz dc-dc conversion.
- 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (9) , 4801-4804
A High-Efficiency Double-Side Silicon- Embedded Inductor for Integrated DC–DC Converter Applications
In this brief, a novel double-side silicon-embedded coreless inductor is proposed and demonstrated for integrated dc-dc converter applications. The inductor has double-side thick windings embedded into the silicon substrate and connected in parallel. Extremely large effective metal thickness of 300 μm can, therefore, be achieved. Consequently, the 0.8 mm 2 inductor fabricated shows a low dc resistance of 42 mΩ. A large inductance to dc resistance ratio of 0.4 nH/ mΩ is then achieved with an inductance over 16.1 nH. The calculated peak effective inductor efficiency is 96.1% for 1.8-0.85 V, 100 MHz dc-dc conversion.
- 11 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 2133-2137
Characterization of Al2O3/LaAlO3/SiO2 Gate Stack on 4H-SiC After Post-Deposition Annealing
We fabricated Al 2 O 3 /LaAlO 3 /SiO 2 (ALS) gate stacks on 4H-SiC, with LaAlO 3 (LAO) film being annealed in O 2 atmosphere. The ALS gate stack annealed at 700 °C exhibits a much higher breakdown effective electric field ( ${E}_{\text {eff}}$ ), which is approximately 1.8 times higher than that of traditional SiO 2 gate oxide. The ALS gate stack also yields a low interface state density ( ${D}_{\text {it}}$ ) thanks to the intact LAO film. However, an annealing temperature as high as 800 °C induced traps in the LAO film and deteriorated the SiO 2 –SiC interface. The 700 °C-annealed LAO film with a high dielectric constant ( $\kappa $ ) of 14 and a low trap density, coupled with good electrical characteristics, makes it a promising gate dielectric for SiC power metal-oxide-semiconductor (MOS) device applications.
- 11 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 2133-2137
Characterization of Al2O3/LaAlO3/SiO2 Gate Stack on 4H-SiC After Post-Deposition Annealing
We fabricated Al 2 O 3 /LaAlO 3 /SiO 2 (ALS) gate stacks on 4H-SiC, with LaAlO 3 (LAO) film being annealed in O 2 atmosphere. The ALS gate stack annealed at 700 °C exhibits a much higher breakdown effective electric field ( ${E}_{\text {eff}}$ ), which is approximately 1.8 times higher than that of traditional SiO 2 gate oxide. The ALS gate stack also yields a low interface state density ( ${D}_{\text {it}}$ ) thanks to the intact LAO film. However, an annealing temperature as high as 800 °C induced traps in the LAO film and deteriorated the SiO 2 –SiC interface. The 700 °C-annealed LAO film with a high dielectric constant ( $\kappa $ ) of 14 and a low trap density, coupled with good electrical characteristics, makes it a promising gate dielectric for SiC power metal-oxide-semiconductor (MOS) device applications.
- 6 January 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 12 (2) , 306-310
Nitrided $\hbox{La}_{2}\hbox{O}_{3}$ as Charge-Trapping Layer for Nonvolatile Memory ApplicationsCharge-trapping characteristics of La 2 O 3 with and without nitrogen incorporation were investigated based on Al/Al 2 O 3 /La 2 O 3 /SiO 2 /Si (MONOS) capacitors. The physical properties of the high- k films were analyzed by X-ray diffraction and X-ray photoelectron spectroscopy. Compared with the MONOS capacitor with La 2 O 3 as charge-trapping layer, the one with nitrided La 2 O 3 showed a larger memory window (4.9 V at ±10-V sweeping voltage), higher program speed (4.9 V at 1-ms +14 V), and smaller charge loss (27% after 10 years), due to the nitrided La 2 O 3 film exhibiting less crystallized structure and high trap density induced by nitrogen incorporation, and suppressed leakage by nitrogen passivation.
- 6 January 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 12 (2) , 306-310
Nitrided $\hbox{La}_{2}\hbox{O}_{3}$ as Charge-Trapping Layer for Nonvolatile Memory ApplicationsCharge-trapping characteristics of La 2 O 3 with and without nitrogen incorporation were investigated based on Al/Al 2 O 3 /La 2 O 3 /SiO 2 /Si (MONOS) capacitors. The physical properties of the high- k films were analyzed by X-ray diffraction and X-ray photoelectron spectroscopy. Compared with the MONOS capacitor with La 2 O 3 as charge-trapping layer, the one with nitrided La 2 O 3 showed a larger memory window (4.9 V at ±10-V sweeping voltage), higher program speed (4.9 V at 1-ms +14 V), and smaller charge loss (27% after 10 years), due to the nitrided La 2 O 3 film exhibiting less crystallized structure and high trap density induced by nitrogen incorporation, and suppressed leakage by nitrogen passivation.