XPXin Peng

Xin Peng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xin Peng has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis and Characterization of the Punchthrough n-p-n Diode for Hard Switching Power Control Applications

    by Xin Peng, Yong Liu, Hao Feng, Linhua Huang, Johnny K. O. Sin

    In this article, analysis and characterization of a new punchthrough (PT) n-p-n diode are performed. Numerical analysis shows that the PT voltage $\textit{V}_{{\text{PT}}}$ and the p $^{{+}}$ width ratio are the critical parameters to control the hole injection efficiency of the PT n-p-n diode. As a result, a locally reduced carrier profile can be realized due to the existence of electron extraction. Experimental results show that the leakage current of the PT n-p-n diode at 400 K can be kept at a level similar to that of a conventional Self-adjusting P Emitter Efficiency Diode (SPEED) with a well-designed $\textit{V}_{{\text{PT}}}$ . In addition, a p $^{{+}}$ width ratio of 20% is optimal for a better peak reverse recovery current ( $\textit{I}_{{\text{rrm}}}$ ) and forward voltage ( $\textit{V}_{{\text{F}}}$ ) tradeoff relationship. Compared with SPEED, the PT n-p-n diode achieves a reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 21%) and minimized reverse recovery loss $\textit{E}_{{\text{rec}}}$ ( $-$ 18%) at a nominal current. It can realize a significantly reduced $\textit{I}_{{\text{rrm}}}$ ( $-$ 42%) even at a small current and a bus voltage of 800 V. Moreover, better reverse recovery performances of the PT n-p-n diode are maintained at 400 K.


  • On-Resistance–Reliability Tradeoffs in Al₂O₃/LaAlO₃/SiO₂ Gate for SiC Power MOSFETs

    by Linhua Huang, Yong Liu, Xin Peng, Takashi Tsuji, Yuichi Onozawa, Naoto Fujishima, Johnny K. O. Sin

    On-resistance–reliability tradeoffs are investigated for SiC power MOSFETs using Al2O3/LaAlO3/SiO2 gate dielectrics. Due to the high gate capacitance, the Al2O3/LaAlO3/SiO2 gate device shows an improvement on the channel resistance ( ${R}_{\text {ch}}$ ) versus threshold voltage shift ( ${\Delta } {V}_{\text {th}}$ ) tradeoff compared to the SiO2 gate counterpart. Besides, the short-circuit withstand time of the Al2O3/LaAlO3/SiO2 gate device is 1.55 times longer than that of the SiO2 gate device, while the two devices have the same on-resistance. Furthermore, the predicted lifetime of the Al2O3/LaAlO3/SiO2 gate device is ten years at an effective electric field ( ${E}_{\text {eff}}$ ) of 4.8 MV/cm, which is comparable with the latest reported result of the SiO2 gate counterpart.


  • A Fast and Soft Reverse Recovery Diode With a Punch-Through NPN Structure

    by Xin Peng, Yong Liu, Hao Feng, Linhua Huang, Johnny K. O. Sin

    A fast and soft reverse recovery diode with a Punch-Through (PT) NPN structure is proposed and experimentally demonstrated. The structure features a P-type Schottky contact, a PT-NPN region for electron extraction, and a trench region with the bottom surrounded by a P-layer. Compared with conventional Self-adjusting P Emitter Efficiency Diode (SPEED), the proposed PT-NPN diode provides a much larger softness factor S (+23%), a shorter reverse recovery time T rr (-5%), and a much reduced reverse recovery charge Q rr (-20%) at nominal current.


  • Static Performance and Threshold Voltage Stability Improvement of Al2O3/LaAlO3/SiO2Gate-Stack for SiC Power MOSFETs

    by Linhua Huang, Yong Liu, Xin Peng, Yuichi Onozawa, Takashi Tsuji, Naoto Fujishima, Johnny K. O. Sin

    Lateral metal–oxide–semiconductor field-effect transistors (MOSFETs) are fabricated on 4H-SiC utilizing deposited high- ${k}$ gate dielectrics. The high- ${k}$ gate-stack consists of thin nitrided SiO 2 and 40 nm of LaAlO 3 covered with a thin Al 2 O 3 cap. The high- ${k}$ gate MOSFET achieves a 40% reduction in channel resistance (at ${V}_{gs} = 15$ V) compared with that of the conventional SiO 2 gate MOSFET. In addition, bidirectional transfer characteristics of the high- ${k}$ gate MOSFET indicate slight hysteresis and show a superior threshold voltage stability compared to that of competitors, in a range of −15 V $\le {V}_{gs} \le16$ V under room and elevated temperatures. Therefore, the Al 2 O 3 /LaAlO 3 /SiO 2 gate-stack can provide both low on-resistance and good threshold voltage stability for SiC power MOSFETs.


  • Characterization of Al2O3/LaAlO3/SiO2 Gate Stack on 4H-SiC After Post-Deposition Annealing

    by Linhua Huang, Yong Liu, Chao Xiao, Yixiao Ding, Xin Peng, Yuichi Onozawa, Takashi Tsuji, Naoto Fujishima, Johnny K. O. Sin

    We fabricated Al 2 O 3 /LaAlO 3 /SiO 2 (ALS) gate stacks on 4H-SiC, with LaAlO 3 (LAO) film being annealed in O 2 atmosphere. The ALS gate stack annealed at 700 °C exhibits a much higher breakdown effective electric field ( ${E}_{\text {eff}}$ ), which is approximately 1.8 times higher than that of traditional SiO 2 gate oxide. The ALS gate stack also yields a low interface state density ( ${D}_{\text {it}}$ ) thanks to the intact LAO film. However, an annealing temperature as high as 800 °C induced traps in the LAO film and deteriorated the SiO 2 –SiC interface. The 700 °C-annealed LAO film with a high dielectric constant ( $\kappa $ ) of 14 and a low trap density, coupled with good electrical characteristics, makes it a promising gate dielectric for SiC power metal-oxide-semiconductor (MOS) device applications.


  • High voltage trench insulated gate bipolar transistor with MOS structure for self-adjustable hole extraction

    by Yishang Zhao, Zehong Li, Xin Peng, Yang Yang, Xiao Zeng, Min Ren, Jinping Zhang, Wei Gao, Bo Zhang

    In this letter, a novel high voltage trench insulated gate bipolar transistor (IGBT) with MOS structure for self-adjustable hole extraction (MOS-SH-IGBT) is proposed. It features the adjustable hole path (AHP) region controlled by the MOS structure. The AHP region stores holes during on-state, extracts holes swiftly to reduce switching loss during turn-off and provides an extra hole path to avoid latch-up during short-circuit. Because of shielding effects of the AHP region, MOS-SH-IGBT could also increase breakdown voltage (BV) and decrease Miller capacitance. Based on simulated results, the BV of the proposed device is increased by 10% compared with the conventional separate floating P-base IGBT. Furthermore, the Miller capacitance and switching loss of MOS-SH-IGBT are decreased by 64% and 29%, respectively. As for the same E on of 117.3mJ cm −2 , the dI ce /dt of the MOS-SH-IGBT is decreased by 38.7%, and for the same E off of 64.1mJ cm −2 , the | dI ce /dt | is decreased by 23.4%, which realizes lower EMI noise.