Damilola Balogun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Damilola Balogun has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jie Huang
Missouri University of Science and Technology
2 shared publications - Laura Bartlett
Department of Material Science and Engineering, Missouri University of Science and Technology, Rolla, MO, USA
2 shared publications - Muhammad Roman
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
2 shared publications - Rex E. Gerald
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
2 shared publications - Chen Zhu
Missouri University of Science and Technology
1 shared publication - Ronald J. O’malley
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO, USA
1 shared publication
Latest Publications
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-10
Thermal Mapping of Metal Casting Mold Using High-Resolution Distributed Fiber-Optic Sensors
This article reports a technique to embed optical fiber into a copper mold plate for generating high-density thermal maps of the mold during the process of metal casting. The temperature measurements were based on acquiring and interpreting Rayleigh backscattering (RBS) signals from embedded fiber, using the interrogation technique of optical frequency domain reflectometry (OFDR). The instrumented mold plate was used to perform a cast-iron dip test and a steel dip test in a 200 lb induction furnace. The maximum temperatures recorded by the embedded fiber-optic sensors were 469 °C and 388 °C in the cast-iron and steel dip tests, respectively. The closely spaced and rapidly fluctuating temperature features that were imparted to the mold wall during solidification were successfully mapped with a high spatial resolution (0.65 mm) and a fast measurement rate (25 Hz) using a commercial OFDR interrogator (LUNA ODiSI 6108). Moreover, the thickness of the solidified steel shell was measured, and a thickness map of the shell was generated. A good correlation was observed between the thickness of the solidified shell and the temperature of the mold, as regions with higher and lower temperatures in the thermal profile of the mold corresponded to thicker and thinner areas on the shell, respectively. The dip testing experiments demonstrate that RBS-based fiber-optic sensing is a feasible and effective method for generating information-rich thermal maps of caster molds. The information obtained from thermal maps can be useful for improving the quality of the metal and productivity of the metal casting process.
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-10
Thermal Mapping of Metal Casting Mold Using High-Resolution Distributed Fiber-Optic Sensors
This article reports a technique to embed optical fiber into a copper mold plate for generating high-density thermal maps of the mold during the process of metal casting. The temperature measurements were based on acquiring and interpreting Rayleigh backscattering (RBS) signals from embedded fiber, using the interrogation technique of optical frequency domain reflectometry (OFDR). The instrumented mold plate was used to perform a cast-iron dip test and a steel dip test in a 200 lb induction furnace. The maximum temperatures recorded by the embedded fiber-optic sensors were 469 °C and 388 °C in the cast-iron and steel dip tests, respectively. The closely spaced and rapidly fluctuating temperature features that were imparted to the mold wall during solidification were successfully mapped with a high spatial resolution (0.65 mm) and a fast measurement rate (25 Hz) using a commercial OFDR interrogator (LUNA ODiSI 6108). Moreover, the thickness of the solidified steel shell was measured, and a thickness map of the shell was generated. A good correlation was observed between the thickness of the solidified shell and the temperature of the mold, as regions with higher and lower temperatures in the thermal profile of the mold corresponded to thicker and thinner areas on the shell, respectively. The dip testing experiments demonstrate that RBS-based fiber-optic sensing is a feasible and effective method for generating information-rich thermal maps of caster molds. The information obtained from thermal maps can be useful for improving the quality of the metal and productivity of the metal casting process.
- 8 September 2021
- Published by Wiley in Steel Research International
- Vol. 93 (1)
Shell Measurements and Mold Thermal Mapping Approach to Characterize Steel Shell Formation in Peritectic Grade Steels
Herein, the prospects of detecting peritectic behavior in carbon steels (Fe–C) using solidified shell thickness measurements and real‐time mold thermal maps are investigated. Irregular steel shell thickness and localized shell thinning are negative conditions associated with the peritectic transformation in many steel grades. Detailed three dimensional (3D) thickness maps are generated to directly contrast peritectic from nonperitectic solidification features using a laboratory dip test. Characterization of the steel shell also includes measurement of 3D shell surface deviations from a nominally flat surface. The unevenness parameter, which is calculated using the coefficient of variation in shell thickness as a function of the carbon content in the steel, clearly peaks around 0.14%C. A distributed fiber‐optic sensor, embedded 1 mm from the working face of a 100 × 55 × 12 mm3 thick copper chill block, has been used to obtain real‐time mold thermal maps of the solidification event during immersion of the block into molten steel. A programmable drive is used to control the motion of the chill block during immersion into a steel bath to minimize variability in immersion speed, position, and time. The thermal mapping measurements are well correlated with the shell profile measurements.
- 8 September 2021
- Published by Wiley in Steel Research International
- Vol. 93 (1)
Shell Measurements and Mold Thermal Mapping Approach to Characterize Steel Shell Formation in Peritectic Grade Steels
Herein, the prospects of detecting peritectic behavior in carbon steels (Fe–C) using solidified shell thickness measurements and real‐time mold thermal maps are investigated. Irregular steel shell thickness and localized shell thinning are negative conditions associated with the peritectic transformation in many steel grades. Detailed three dimensional (3D) thickness maps are generated to directly contrast peritectic from nonperitectic solidification features using a laboratory dip test. Characterization of the steel shell also includes measurement of 3D shell surface deviations from a nominally flat surface. The unevenness parameter, which is calculated using the coefficient of variation in shell thickness as a function of the carbon content in the steel, clearly peaks around 0.14%C. A distributed fiber‐optic sensor, embedded 1 mm from the working face of a 100 × 55 × 12 mm3 thick copper chill block, has been used to obtain real‐time mold thermal maps of the solidification event during immersion of the block into molten steel. A programmable drive is used to control the motion of the chill block during immersion into a steel bath to minimize variability in immersion speed, position, and time. The thermal mapping measurements are well correlated with the shell profile measurements.