LBLaura Bartlett

Laura Bartlett

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Laura Bartlett has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Cascaded Sapphire Fiber Bragg Gratings Inscribed by Femtosecond Laser for Molten Steel Studies

    by Dinesh Reddy Alla, Deva Prasad Neelakandan, Farhan Mumtaz, Rex E. Gerald, Laura Bartlett, Ronald J. O’mAlley, Jeffrey D. Smith, Jie Huang

    This research reports a distributed fiber optic high-temperature sensing system tailored for applications in the steel industry and various other sectors. Recent advancements in optical sensor technology have led to the exploration of sapphire crystal fibers as a solution for sensing in harsh environments. Utilizing a femtosecond (fs) laser, cascaded fiber Bragg gratings (FBGs) were meticulously fabricated within a multimode sapphire optical fiber. These FBGs endowed the system with distributed sensing capabilities and underwent rigorous testing under extreme temperatures, reaching up to 1800 °C. The study delves into the investigation of the FBG reflection spectrum, facilitated by the development of a sophisticated multimode demodulation system, which contributed to the attainment of precise temperature measurements with a performance accuracy of 99.9%. Demonstrating exceptional thermal stability, the sapphire FBGs endured temperatures of 1600 °C for a sustained duration of 22 h. Furthermore, this article explores the application of distributed temperature sensing employing multiple sapphire FBGs, showcasing their utility in temperature measurements related to molten steel studies.


  • Open Access

    Advancing Aluminum Casting Optimization With Real-Time Temperature and Gap Measurements Using Optical Fiber Sensors at the Metal-Mold Interface

    by Bohong Zhang, Abhishek Prakash Hungund, Dinesh Reddy Alla, Deva Prasaad Neelakandan, Muhammad Roman, Ronald J. O’mAlley, Laura Bartlett, Rex E. Gerald, Jie Huang

    Accurate measurement of interfacial heat transfer during casting solidification is crucial for optimizing metal solidification processes. The gap between the mold wall and casting surface plays a significant role in heat transfer and cooling rates. In this study, two innovative fiber-optic sensors are employed to measure real-time mold gaps and thermal profiles during the solidification of A356 aluminum in a permanent mold casting. The experimental setup consists of a specially designed mold system made of unheated, uncoated tool steel, which facilitates easy installation of the fiber-optic sensors. An Extrinsic Fabry-Perot interferometric (EFPI) sensor is utilized to monitor the evolving gap between the mold wall and casting surface. This method relies on the unique concept of using molten metal as the second reflection interface for gap measurements. The EFPI gap measurements exhibit high accuracy and precision, with a maximum error of only 2 μm when compared to physical measurements. Simultaneously, a stainless steel-encased fiber utilizing the Rayleigh backscattering (RBS) technique is deployed across the mold wall and cavity to achieve real-time temperature measurements with a spatial resolution of 0.65 mm. The study demonstrates that leveraging high-resolution temperature profiles and gap evolution measurements enhances understanding of heat transfer dynamics at the mold-metal interface, particularly valuable for complex-shaped castings and continuously cast metals. Additionally, the ability to measure the cast shape exiting a continuous casting mold during operation presents a novel tool for real-time product quality monitoring and process safety enhancement by detecting conditions that may lead to slab cracking and breakouts.


  • Temperature Monitoring in the Refractory Lining of a Continuous Casting Tundish Using Distributed Optical Fiber Sensors

    by Muhammad Roman, Hanok Tekle, Dinesh Reddy Alla, Farhan Mumtaz, Jeffrey D. Smith, Laura Bartlett, Ronald J. O'MAlley, Rex E. Gerald, Jie Huang

    This paper explores the prospects of using spatially distributed optical fiber temperature sensors based on Rayleigh OFDR (optical frequency domain reflectometry) technology in the continuous casting of molten steel. The measurement capability of the optical fiber sensors in a simulated steelmaking environment was demonstrated using a mock refractory-lined tundish, which was fabricated in-house. Single-mode optical fibers, contained in protective stainless-steel tubing, were embedded in the refractory lining of the mock tundish. The instrumented tundish was preheated up to a temperature of 960 °C (recorded at the surface of the working lining) before the molten steel pour. A low-alloy steel (AISI 4140 grade) was melted in a 200 lb (90.7 kg) coreless induction furnace and was poured into the instrumented preheated tundish. The embedded optical fiber sensors were used to measure the temperature distribution in the castable lining during the preheating process of the tundish and during its contact with molten steel. Temperatures were metered with a spatial resolution of 0.65 mm along the embedded optical fibers. The measurements were recorded with an update rate of 1 Hz. The maximum temperature recorded by the optical fiber sensors in the castable lining after the steel pour was 591 °C. The spatially continuous optical fiber sensors provided useful information on thermal gradients in the castable lining. Real-time monitoring of spatially distributed thermal profiles in the refractory lining can improve superheat control, reduce energy losses, detect refractory wear, and improve the quality of the cast.


  • Thermal Mapping of Metal Casting Mold Using High-Resolution Distributed Fiber-Optic Sensors

    by Muhammad Roman, Damilola Balogun, Chen Zhu, Laura Bartlett, Ronald J. O'MAlley, Rex E. Gerald, Jie Huang

    This article reports a technique to embed optical fiber into a copper mold plate for generating high-density thermal maps of the mold during the process of metal casting. The temperature measurements were based on acquiring and interpreting Rayleigh backscattering (RBS) signals from embedded fiber, using the interrogation technique of optical frequency domain reflectometry (OFDR). The instrumented mold plate was used to perform a cast-iron dip test and a steel dip test in a 200 lb induction furnace. The maximum temperatures recorded by the embedded fiber-optic sensors were 469 °C and 388 °C in the cast-iron and steel dip tests, respectively. The closely spaced and rapidly fluctuating temperature features that were imparted to the mold wall during solidification were successfully mapped with a high spatial resolution (0.65 mm) and a fast measurement rate (25 Hz) using a commercial OFDR interrogator (LUNA ODiSI 6108). Moreover, the thickness of the solidified steel shell was measured, and a thickness map of the shell was generated. A good correlation was observed between the thickness of the solidified shell and the temperature of the mold, as regions with higher and lower temperatures in the thermal profile of the mold corresponded to thicker and thinner areas on the shell, respectively. The dip testing experiments demonstrate that RBS-based fiber-optic sensing is a feasible and effective method for generating information-rich thermal maps of caster molds. The information obtained from thermal maps can be useful for improving the quality of the metal and productivity of the metal casting process.


  • Shell Measurements and Mold Thermal Mapping Approach to Characterize Steel Shell Formation in Peritectic Grade Steels

    by Damilola Balogun, Muhammad Roman, Rex E. Gerald, Jie Huang, Laura Bartlett, Ronald O'MAlley

    Herein, the prospects of detecting peritectic behavior in carbon steels (Fe–C) using solidified shell thickness measurements and real‐time mold thermal maps are investigated. Irregular steel shell thickness and localized shell thinning are negative conditions associated with the peritectic transformation in many steel grades. Detailed three dimensional (3D) thickness maps are generated to directly contrast peritectic from nonperitectic solidification features using a laboratory dip test. Characterization of the steel shell also includes measurement of 3D shell surface deviations from a nominally flat surface. The unevenness parameter, which is calculated using the coefficient of variation in shell thickness as a function of the carbon content in the steel, clearly peaks around 0.14%C. A distributed fiber‐optic sensor, embedded 1 mm from the working face of a 100 × 55 × 12 mm3 thick copper chill block, has been used to obtain real‐time mold thermal maps of the solidification event during immersion of the block into molten steel. A programmable drive is used to control the motion of the chill block during immersion into a steel bath to minimize variability in immersion speed, position, and time. The thermal mapping measurements are well correlated with the shell profile measurements.