Erik Nilsson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Erik Nilsson has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Delphine Bard Hagberg
Division of Engineering Acoustics, Lund University, P.O. Box 118, 221 00 Lund, Sweden
4 shared publications - Sylvain Ménard
Department of Applied Sciences, University of Québec at Chicoutimi, Saguenay, QC G7H2B1, Canada
3 shared publications - Nikolaos-Georgios Vardaxis
Division of Engineering Acoustics, Lund University, P.O. Box 118, 221 00 Lund, Sweden
2 shared publications Anders Ekbom
Department of Medical Epidemiology, Karolinska Institutet, Box 281, SE-171 77 Stockholm, Sweden
1 shared publication- Birger Sandzén
Department of Surgical and Perioperative Sciences, Surgery, Umeå University, Umeå, Sweden
1 shared publication - Hans Stenlund
Umeå Plant Science Centre (UPSC), Department of Plant Physiology, Umeå University, 90187 Umeå, Sweden
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by AOSIS in Jàmbá: Journal of Disaster Risk Studies
- Vol. 18 (1) , 22
Flood risk management in Rwanda: A review of basic conditions and recommendations for an enhanced institutional framework
Rwanda faces substantial and growing challenges from flood impacts in both rural and urban areas. This review examines riverine flood events and flood risk management (FRM) in Rwanda, identifying key drivers, institutional developments and persistent gaps. Frequent flooding, which has affected more than 2 million people, is primarily driven by steep topography and intense rainfall, compounded by rapid urbanisation, deforestation and unregulated mining activities. Based on a systematic review of 19 stakeholder reports and 41 peer-reviewed research articles, the study highlights critical shortcomings in current FRM practices, including fragmented data management, the absence of dedicated FRM legislation and limited technical capacity at sub-national levels. Although existing interventions increasingly incorporate nature-based solutions such as terracing and reforestation, their effectiveness is often constrained by governance structures that follow administrative rather than hydrological boundaries. To support Rwanda’s Vision 2050, the review advocates a shift from reactive disaster response towards proactive, catchment-based flood governance. Contribution: Key recommendations include the establishment of technically specialised catchment-level institutions, the deployment of automated telemetry-enabled hydro-meteorological monitoring systems and the expansion of integrated green-grey infrastructure. Collectively, these measures aim to establish a robust, multi-level FRM framework capable of reducing vulnerability under escalating climate risks.
- 1 January 2026
- Published by AOSIS in Jàmbá: Journal of Disaster Risk Studies
- Vol. 18 (1) , 22
Open AccessFlood risk management in Rwanda: A review of basic conditions and recommendations for an enhanced institutional framework
Rwanda faces substantial and growing challenges from flood impacts in both rural and urban areas. This review examines riverine flood events and flood risk management (FRM) in Rwanda, identifying key drivers, institutional developments and persistent gaps. Frequent flooding, which has affected more than 2 million people, is primarily driven by steep topography and intense rainfall, compounded by rapid urbanisation, deforestation and unregulated mining activities. Based on a systematic review of 19 stakeholder reports and 41 peer-reviewed research articles, the study highlights critical shortcomings in current FRM practices, including fragmented data management, the absence of dedicated FRM legislation and limited technical capacity at sub-national levels. Although existing interventions increasingly incorporate nature-based solutions such as terracing and reforestation, their effectiveness is often constrained by governance structures that follow administrative rather than hydrological boundaries. To support Rwanda’s Vision 2050, the review advocates a shift from reactive disaster response towards proactive, catchment-based flood governance. Contribution: Key recommendations include the establishment of technically specialised catchment-level institutions, the deployment of automated telemetry-enabled hydro-meteorological monitoring systems and the expansion of integrated green-grey infrastructure. Collectively, these measures aim to establish a robust, multi-level FRM framework capable of reducing vulnerability under escalating climate risks.
- Open Access
A divergence preserving cut finite element method for Darcy flow
We study cut finite element discretizations of a Darcy interface problem based on the mixed finite element pairs $\textbf{RT}_k\times Q_k$, $k\geq 0$. Here $Q_k$ is the space of discontinuous polynomial functions of degree less or equal to $k$ and $\textbf{RT}$ is the Raviart-Thomas space. We show that the standard ghost penalty stabilization, often added in the weak forms of cut finite element methods for stability and control of the condition number of the linear system matrix, destroys the divergence-free property of the considered element pairs. Therefore, we propose new stabilization terms for the pressure and show that we recover the optimal approximation of the divergence without losing control of the condition number of the linear system matrix. We prove that the method with the new stabilization term has pointwise divergence-free approximations of solenoidal velocity fields. We derive a priori error estimates for the proposed unfitted finite element discretization based on $\textbf{RT}_k\times Q_k$, $k\geq 0$. In addition, by decomposing the mesh into macro-elements and applying ghost penalty terms only on interior edges of macro-elements, stabilization is applied very restrictively and only where needed. Numerical experiments with element pairs $\textbf{RT}_0\times Q_0$, $\textbf{RT}_1\times Q_1$, and $\textbf{BDM}_1\times Q_0$ (where $\textbf{BDM}$ is the Brezzi-Douglas-Marini space) indicate that we have 1) optimal rates of convergence of the approximate velocity and pressure; 2) well-posed linear systems where the condition number of the system matrix scales as it does for fitted finite element discretizations; 3) optimal rates of convergence of the approximate divergence with pointwise divergence-free approximations of solenoidal velocity fields. All three properties hold independently of how the interface is positioned relative to the computational mesh.Open AccessA divergence preserving cut finite element method for Darcy flow
We study cut finite element discretizations of a Darcy interface problem based on the mixed finite element pairs $\textbf{RT}_k\times Q_k$, $k\geq 0$. Here $Q_k$ is the space of discontinuous polynomial functions of degree less or equal to $k$ and $\textbf{RT}$ is the Raviart-Thomas space. We show that the standard ghost penalty stabilization, often added in the weak forms of cut finite element methods for stability and control of the condition number of the linear system matrix, destroys the divergence-free property of the considered element pairs. Therefore, we propose new stabilization terms for the pressure and show that we recover the optimal approximation of the divergence without losing control of the condition number of the linear system matrix. We prove that the method with the new stabilization term has pointwise divergence-free approximations of solenoidal velocity fields. We derive a priori error estimates for the proposed unfitted finite element discretization based on $\textbf{RT}_k\times Q_k$, $k\geq 0$. In addition, by decomposing the mesh into macro-elements and applying ghost penalty terms only on interior edges of macro-elements, stabilization is applied very restrictively and only where needed. Numerical experiments with element pairs $\textbf{RT}_0\times Q_0$, $\textbf{RT}_1\times Q_1$, and $\textbf{BDM}_1\times Q_0$ (where $\textbf{BDM}$ is the Brezzi-Douglas-Marini space) indicate that we have 1) optimal rates of convergence of the approximate velocity and pressure; 2) well-posed linear systems where the condition number of the system matrix scales as it does for fitted finite element discretizations; 3) optimal rates of convergence of the approximate divergence with pointwise divergence-free approximations of solenoidal velocity fields. All three properties hold independently of how the interface is positioned relative to the computational mesh. - Open Access
Effects of Building Height on the Sound Transmission in Cross-Laminated Timber Buildings—Vibration Reduction Index
High-rise wooden buildings are increasing in popularity, and they typically include cross-laminated timber in the structure. Taller buildings result in higher loads on the junctions lower down in the building, which are suggested in the literature to negatively affect the sound insulation. This study involved measurement of the vibration reduction index in four different CLT buildings, varying in height and junction details. A total of 12 junctions were measured at both high and low levels in the buildings. Among these, 10 junctions had resilient interlayers with different stiffnesses dependent on the designed quasi-permanent load, while 2 junctions lacked resilient interlayers. The results indicated that the vibration reduction index decreases lower down in the building mainly for the Wall–Wall path. The findings were consistent for all measured junctions above 400 Hz for the Wall–Wall path and for the majority of the measurements of the remaining frequency range, 400 Hz and below. The observed difference in the vibration reduction index could significantly impact the final result if a high-rise building has several flanking paths that affect the sound insulation between two apartments, and this needs to be considered during the design phase. Similar effects were shown for buildings both with and without resilient interlayers in the junctions.
Open AccessEffects of Building Height on the Sound Transmission in Cross-Laminated Timber Buildings—Vibration Reduction Index
High-rise wooden buildings are increasing in popularity, and they typically include cross-laminated timber in the structure. Taller buildings result in higher loads on the junctions lower down in the building, which are suggested in the literature to negatively affect the sound insulation. This study involved measurement of the vibration reduction index in four different CLT buildings, varying in height and junction details. A total of 12 junctions were measured at both high and low levels in the buildings. Among these, 10 junctions had resilient interlayers with different stiffnesses dependent on the designed quasi-permanent load, while 2 junctions lacked resilient interlayers. The results indicated that the vibration reduction index decreases lower down in the building mainly for the Wall–Wall path. The findings were consistent for all measured junctions above 400 Hz for the Wall–Wall path and for the majority of the measurements of the remaining frequency range, 400 Hz and below. The observed difference in the vibration reduction index could significantly impact the final result if a high-rise building has several flanking paths that affect the sound insulation between two apartments, and this needs to be considered during the design phase. Similar effects were shown for buildings both with and without resilient interlayers in the junctions.
- Open Access
- 4 January 2023
- Published by Elsevier in Building and Environment
- Vol. 229
Effects of building height on the sound transmission in cross-laminated timber buildings – Airborne sound insulation
- 4 January 2023
- Published by Elsevier in Building and Environment
- Vol. 229
Open AccessEffects of building height on the sound transmission in cross-laminated timber buildings – Airborne sound insulation
- Open Access
Acoustical Treatments on Ventilation Ducts through Walls: Experimental Results and Novel Models
Sound reduction is complex to estimate for acoustical treatments on ventilation ducts through walls. Various acoustical treatments are available for ventilation ducts, including internal lining (absorption along the inner perimeter), external lagging (external sound insulation), silencer, and suspended ceilings. Previous studies have examined how silencers and the internal lining affect the sound transmission of ventilation ducts. However, there are few theories to predict the effect of external lagging in combination with ventilation ducts and how the total sound reduction is affected. This article aims to investigate different acoustical treatments and develop theoretical models when external lagging with stone wool is used to reduce flanking sound transmission via the surface area of ventilation ducts. Theoretical models are developed for external lagging and compared with measurement data. Measurements and theory are generally in good agreement over the third-octave band range of 100–5000 Hz. The developed models clarify that the distance closest to the wall has the main impact on sound reduction for a combined system with a wall and a ventilation duct. Suspended ceilings and silencers are found to be enough as acoustical treatments for certain combinations of ventilation ducts and walls. However, external lagging seems to be the only effective solution in offices and schools when a large ventilation duct passes through a wall with high sound reduction.
Open AccessAcoustical Treatments on Ventilation Ducts through Walls: Experimental Results and Novel Models
Sound reduction is complex to estimate for acoustical treatments on ventilation ducts through walls. Various acoustical treatments are available for ventilation ducts, including internal lining (absorption along the inner perimeter), external lagging (external sound insulation), silencer, and suspended ceilings. Previous studies have examined how silencers and the internal lining affect the sound transmission of ventilation ducts. However, there are few theories to predict the effect of external lagging in combination with ventilation ducts and how the total sound reduction is affected. This article aims to investigate different acoustical treatments and develop theoretical models when external lagging with stone wool is used to reduce flanking sound transmission via the surface area of ventilation ducts. Theoretical models are developed for external lagging and compared with measurement data. Measurements and theory are generally in good agreement over the third-octave band range of 100–5000 Hz. The developed models clarify that the distance closest to the wall has the main impact on sound reduction for a combined system with a wall and a ventilation duct. Suspended ceilings and silencers are found to be enough as acoustical treatments for certain combinations of ventilation ducts and walls. However, external lagging seems to be the only effective solution in offices and schools when a large ventilation duct passes through a wall with high sound reduction.
- Open Access
Sound Reduction of Ventilation Ducts through Walls: Experimental Results and Updated Models
Ventilation ducts can have a negative effect on the sound reduction index between two rooms if they pass through the dividing structure without treatments. The overall sound reduction of a ventilation duct is dependent on several factors including the transmission loss when sound is breaking in and out from the duct. This study aims to model the sound reduction of a combined system with a separating wall and a ventilation duct through it. Three walls, characterized according to ISO 717-1, are combined with three different ventilation ducts, two circular and one rectangular with different dimensions. Laboratory measurement data are used to determine the sound reduction of the different configurations and the type of treatments needed for each configuration. A proposed model with existing theory for describing sound transmission losses of circular and rectangular ventilation ducts predicts the shape of the measurement data for many frequency bands. A new theory part is developed through an iterative process for circular ducts, which is based on measurements with previous methods and studies as a guide because the existing prediction scheme is somewhat perplexing. For rectangular ducts, the existing theory has been updated to better match measurement data. The application of the proposed theory and model in this article shows similar results when compared to measurements. The difference in weighted sound reduction index between developed theories and measurement data is 0–1 dB for every configuration.
Open AccessSound Reduction of Ventilation Ducts through Walls: Experimental Results and Updated Models
Ventilation ducts can have a negative effect on the sound reduction index between two rooms if they pass through the dividing structure without treatments. The overall sound reduction of a ventilation duct is dependent on several factors including the transmission loss when sound is breaking in and out from the duct. This study aims to model the sound reduction of a combined system with a separating wall and a ventilation duct through it. Three walls, characterized according to ISO 717-1, are combined with three different ventilation ducts, two circular and one rectangular with different dimensions. Laboratory measurement data are used to determine the sound reduction of the different configurations and the type of treatments needed for each configuration. A proposed model with existing theory for describing sound transmission losses of circular and rectangular ventilation ducts predicts the shape of the measurement data for many frequency bands. A new theory part is developed through an iterative process for circular ducts, which is based on measurements with previous methods and studies as a guide because the existing prediction scheme is somewhat perplexing. For rectangular ducts, the existing theory has been updated to better match measurement data. The application of the proposed theory and model in this article shows similar results when compared to measurements. The difference in weighted sound reduction index between developed theories and measurement data is 0–1 dB for every configuration.
- 19 December 2012
- Published by Taylor & Francis in Scandinavian Journal of Gastroenterology
- Vol. 48 (4) , 480-486
Surgery for acute gallbladder disease in Sweden 1989–2006 – a register study
Objective. Since early 1970s, prospective randomized controlled trials have emphasized the advantages of early cholecystectomy in patients with acute cholecystitis, compared to elective delayed cholecystectomy. The aim of this investigation was to study surgery for acute gallbladder disease in Sweden during a 15-year period when open cholecystectomy was replaced by a laparoscopic procedure. Material and methods. Data from the Swedish National Patient Register and the Cause of Death Register 1988–2006 comprising hospital stays with a primary diagnosis of gallbladder/gallstone disease in Sweden were retrieved. Patients were analyzed with reference to timing of cholecystectomy, length of hospital stay, and mortality. Results. Emergency cholecystectomy at index (first) admission or at readmission within 2 years of index admission was performed in 32.2% and 6.1% of patients, respectively. Elective cholecystectomy within 2 years of index admission was performed in 20.3% patients, whereas 41.3% of all patients did not undergo cholecystectomy within 2 years. Standardized mortality ratio did not significantly change during the audit period. Total hospital stay (days at index stay and subsequent stay(s) for biliary diagnoses within 2 years) was shorter for patients who had emergency cholecystectomy at first admission compared to patients with later or no cholecystectomy within 2 years. Conclusions. Around 30% of patients with acute gallbladder disease were operated with cholecystectomy during the first admission with no time trend from 1990 through 2004. A total of 40% of patients with acute gallbladder disease were not cholecystectomized within 2 years. Analysis of outcome of long-term conservative treatment is warranted.
- 19 December 2012
- Published by Taylor & Francis in Scandinavian Journal of Gastroenterology
- Vol. 48 (4) , 480-486
Surgery for acute gallbladder disease in Sweden 1989–2006 – a register study
Objective. Since early 1970s, prospective randomized controlled trials have emphasized the advantages of early cholecystectomy in patients with acute cholecystitis, compared to elective delayed cholecystectomy. The aim of this investigation was to study surgery for acute gallbladder disease in Sweden during a 15-year period when open cholecystectomy was replaced by a laparoscopic procedure. Material and methods. Data from the Swedish National Patient Register and the Cause of Death Register 1988–2006 comprising hospital stays with a primary diagnosis of gallbladder/gallstone disease in Sweden were retrieved. Patients were analyzed with reference to timing of cholecystectomy, length of hospital stay, and mortality. Results. Emergency cholecystectomy at index (first) admission or at readmission within 2 years of index admission was performed in 32.2% and 6.1% of patients, respectively. Elective cholecystectomy within 2 years of index admission was performed in 20.3% patients, whereas 41.3% of all patients did not undergo cholecystectomy within 2 years. Standardized mortality ratio did not significantly change during the audit period. Total hospital stay (days at index stay and subsequent stay(s) for biliary diagnoses within 2 years) was shorter for patients who had emergency cholecystectomy at first admission compared to patients with later or no cholecystectomy within 2 years. Conclusions. Around 30% of patients with acute gallbladder disease were operated with cholecystectomy during the first admission with no time trend from 1990 through 2004. A total of 40% of patients with acute gallbladder disease were not cholecystectomized within 2 years. Analysis of outcome of long-term conservative treatment is warranted.
- 1 November 2000
- Published by Elsevier in Journal of Clinical Epidemiology
- Vol. 53 (11) , 1174-1180
Cholecystectomy in Sweden 1989 and 1994
- 1 November 2000
- Published by Elsevier in Journal of Clinical Epidemiology
- Vol. 53 (11) , 1174-1180
Cholecystectomy in Sweden 1989 and 1994