Dmytro Dzhulii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dmytro Dzhulii has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Victor Maiboroda
КПІ ім. Ігоря Сікорського
7 shared publications - Oleksandr Salenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
4 shared publications - Andrii Havrushkevych
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - Ivanna Slobodianiuk
Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications - Kostiantyn Zastavskyi
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications - Oleksii Burikov
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications
Latest Publications
- Open Access
- 27 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (1 (135)) , 58-80
Providing technical and algorithmical support to the predictable properties of honeycomb filler obtained by additive processes
The object of this study is the FDM process underlying the 3D printing of thin-walled honeycomb-type shells. A solution to the problem of manufacturing a honeycomb filler for a sandwich panel or a panel as a whole, including a curved one, is based on the built model of the process parametric and functional reliability. To this end, the printer dynamics, the behavior of a non-rigid workpiece, and the peculiarities of filament feeding during printing have been analyzed in detail. It has been shown that the predicted mechanical properties, in particular, [σ]x,y,z, are determined by the conditions of extrudate laying and the adhesive bonds formed between its elements, both in the laying plane and between layers, and depend directly on the laying density and on a number of dynamic and thermal phenomena occurring in the mating area. The layout density parameter ρ can be used as a factor in the strength characteristics of the finished article. The application of rational conditions for the movement of the print head, certain features of the contour traversal, the use of supporting elements, and the correct positioning of the part on the printer’s desktop allows for sufficiently reliable reproduction of cellular shell products with maximum strength. It has been proven that the accuracy of basic dimensions of the designed structures corresponds to accuracy quality 11...12 according to engineering standards, which is acceptable for a wide range of applications. The wall thickness of the cellular elements is determined by the filament laying modes, which includes such parameters as extrusion speed, contour traversal speed and acceleration, extrusion temperature, and stacking pitch, but is not less than 1.5 times the diameter of the extruder nozzle. Such geometric parameters provide reasonable strength and rigidity for articles at operation while minimizing the weight of the honeycomb. It has been established that cellular elements should be printed with the use of additional support means; at the same time, the latter do not exclude the occurrence of a certain number of defects whose evolution is not stable and whose presence must be taken into account when predicting the mechanical properties of the finished article
- 27 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (1 (135)) , 58-80
Open AccessProviding technical and algorithmical support to the predictable properties of honeycomb filler obtained by additive processes
The object of this study is the FDM process underlying the 3D printing of thin-walled honeycomb-type shells. A solution to the problem of manufacturing a honeycomb filler for a sandwich panel or a panel as a whole, including a curved one, is based on the built model of the process parametric and functional reliability. To this end, the printer dynamics, the behavior of a non-rigid workpiece, and the peculiarities of filament feeding during printing have been analyzed in detail. It has been shown that the predicted mechanical properties, in particular, [σ]x,y,z, are determined by the conditions of extrudate laying and the adhesive bonds formed between its elements, both in the laying plane and between layers, and depend directly on the laying density and on a number of dynamic and thermal phenomena occurring in the mating area. The layout density parameter ρ can be used as a factor in the strength characteristics of the finished article. The application of rational conditions for the movement of the print head, certain features of the contour traversal, the use of supporting elements, and the correct positioning of the part on the printer’s desktop allows for sufficiently reliable reproduction of cellular shell products with maximum strength. It has been proven that the accuracy of basic dimensions of the designed structures corresponds to accuracy quality 11...12 according to engineering standards, which is acceptable for a wide range of applications. The wall thickness of the cellular elements is determined by the filament laying modes, which includes such parameters as extrusion speed, contour traversal speed and acceleration, extrusion temperature, and stacking pitch, but is not less than 1.5 times the diameter of the extruder nozzle. Such geometric parameters provide reasonable strength and rigidity for articles at operation while minimizing the weight of the honeycomb. It has been established that cellular elements should be printed with the use of additional support means; at the same time, the latter do not exclude the occurrence of a certain number of defects whose evolution is not stable and whose presence must be taken into account when predicting the mechanical properties of the finished article
- Open Access
- 18 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 9 (1(104)) , 114-118
Formation of a microprofile of product surfaces during magneto-abrasive finishing of planes with heads based on high-energy permanent magnets
Experimental studies have been carried out on the possibility of using powder mixtures consisting of large and small particles of various shapes and diamond pastes for magneto-abrasive finishing of flat surfaces of ferromagnetic parts with end heads based on permanent neodymium magnets. It was shown that when using mixtures of powders of shattered shape, the decrease in surface roughness had been obtained from the initial roughness Ra = 0.8 μm to 0.125 μm with a polished microprofile, and the best results occur when the amount of fine fraction in the mixtures does not exceed 40%. The use of mixtures of rounded powders with a particle size of 1700/1200 μm and shattered shape particles of 640/400 μm at their equal amount in the magneto–abrasive tool made it possible to form a surface with a roughness value of Ra=0.1 μm after magneto–abrasive finishing. It has been determined that rounded coarse powders act as a moving lapping tool, transferring the force load to small particles. At the same time, in the process of direct contact with the finished surface, large rounded particles provide both plastic deformation of the surface micro-irregularities and directly of the surface layer of the samples, providing an increase in surface hardness by 1.4 times, which creates favorable conditions for the micro-cutting process with shattered small particles. When forming the magneto-abrasive tool from large rounded particles and diamond paste of different grain sizes, it was found that the best polishing ability is provided by the mixture formed from rounded powder with a particle size of 1500/1300 μm with the addition of diamond paste with a grain size of 5/3 μm. The roughness parameter Ra of the surfaces being finished using such mixtures is 0.03–0.04 μm.
- 18 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 9 (1(104)) , 114-118
Open AccessFormation of a microprofile of product surfaces during magneto-abrasive finishing of planes with heads based on high-energy permanent magnets
Experimental studies have been carried out on the possibility of using powder mixtures consisting of large and small particles of various shapes and diamond pastes for magneto-abrasive finishing of flat surfaces of ferromagnetic parts with end heads based on permanent neodymium magnets. It was shown that when using mixtures of powders of shattered shape, the decrease in surface roughness had been obtained from the initial roughness Ra = 0.8 μm to 0.125 μm with a polished microprofile, and the best results occur when the amount of fine fraction in the mixtures does not exceed 40%. The use of mixtures of rounded powders with a particle size of 1700/1200 μm and shattered shape particles of 640/400 μm at their equal amount in the magneto–abrasive tool made it possible to form a surface with a roughness value of Ra=0.1 μm after magneto–abrasive finishing. It has been determined that rounded coarse powders act as a moving lapping tool, transferring the force load to small particles. At the same time, in the process of direct contact with the finished surface, large rounded particles provide both plastic deformation of the surface micro-irregularities and directly of the surface layer of the samples, providing an increase in surface hardness by 1.4 times, which creates favorable conditions for the micro-cutting process with shattered small particles. When forming the magneto-abrasive tool from large rounded particles and diamond paste of different grain sizes, it was found that the best polishing ability is provided by the mixture formed from rounded powder with a particle size of 1500/1300 μm with the addition of diamond paste with a grain size of 5/3 μm. The roughness parameter Ra of the surfaces being finished using such mixtures is 0.03–0.04 μm.
- Open Access
- 27 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in International Scientific and Technical conference "The Progressive Technics, Technology and Engineering Education"
- No. XXIV,p. 154-159
Thin-wall formation in engineering products using fdm printing
The possibility of creating engineering samples of cellular cylindrical systems has been investigated. Printers of various fields of application were used for their implementation. It has been shown that, in general, with rational placement of supports, satisfactory results can be obtained. In this case, the accuracy of the main dimensions is ensured no worse than 11…12 quality, and the thickness of the honeycomb walls is determined by the filament laying modes and is generally equal to no less than 1.5 diameters of the nozzle used. It has been shown that honeycomb elements should be printed with the involvement of additional support means; since a significant number of defects are present during planar filament laying, it is desirable to take this factor into account when determining the main mechanical properties of the product material during its static and dynamic force analysis. Further research should be aimed at changing the conditions of the reinforcement connection and creating a cross-weaving mesh capable of extending beyond the immediate shell of the extruded filament.
- 27 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in International Scientific and Technical conference "The Progressive Technics, Technology and Engineering Education"
- No. XXIV,p. 154-159
Open AccessThin-wall formation in engineering products using fdm printing
The possibility of creating engineering samples of cellular cylindrical systems has been investigated. Printers of various fields of application were used for their implementation. It has been shown that, in general, with rational placement of supports, satisfactory results can be obtained. In this case, the accuracy of the main dimensions is ensured no worse than 11…12 quality, and the thickness of the honeycomb walls is determined by the filament laying modes and is generally equal to no less than 1.5 diameters of the nozzle used. It has been shown that honeycomb elements should be printed with the involvement of additional support means; since a significant number of defects are present during planar filament laying, it is desirable to take this factor into account when determining the main mechanical properties of the product material during its static and dynamic force analysis. Further research should be aimed at changing the conditions of the reinforcement connection and creating a cross-weaving mesh capable of extending beyond the immediate shell of the extruded filament.
- Open Access
- 10 June 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 8 (2(101)) , 182-194
Rheological models of trabecular structures joint implants obtained by additive processes
Features of the structure of trabecular structures for the manufacture of implants of hip and knee joints and rheological models that can be used as a basis for analyzing the dynamics of biomechanical systems "bone-articulated implant" are considered. It is taken into account that the implant itself should be made in the form of a combined set of functional elements (or initial surfaces), the dynamic properties of which are variable and maximally adapted to the properties of the connected bone, which allows to preserve the initial properties of the bones of the joints as much as possible while ensuring the proper strength and reliability of the structure in as a whole The interdependence of the results of surgical intervention with the patient's initial condition, indications for treatment, his activity and possible postoperative complications was analyzed. An optimization function of the process of designing, manufacturing and operational support of implantation, which has probabilistic components, is proposed.It is shown that it is most appropriate to use the Burgers model when studying the dynamics of the "bone-articulated implant" components, and the trabeculae density coefficient can be a generalized characteristic of the formed trabecular structures, provided that the geometric parameters match the bone tissue.
- 10 June 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 8 (2(101)) , 182-194
Open AccessRheological models of trabecular structures joint implants obtained by additive processes
Features of the structure of trabecular structures for the manufacture of implants of hip and knee joints and rheological models that can be used as a basis for analyzing the dynamics of biomechanical systems "bone-articulated implant" are considered. It is taken into account that the implant itself should be made in the form of a combined set of functional elements (or initial surfaces), the dynamic properties of which are variable and maximally adapted to the properties of the connected bone, which allows to preserve the initial properties of the bones of the joints as much as possible while ensuring the proper strength and reliability of the structure in as a whole The interdependence of the results of surgical intervention with the patient's initial condition, indications for treatment, his activity and possible postoperative complications was analyzed. An optimization function of the process of designing, manufacturing and operational support of implantation, which has probabilistic components, is proposed.It is shown that it is most appropriate to use the Burgers model when studying the dynamics of the "bone-articulated implant" components, and the trabeculae density coefficient can be a generalized characteristic of the formed trabecular structures, provided that the geometric parameters match the bone tissue.
- Open Access
- 3 November 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2(8),p. 134-139
INVESTIGATION OF THE DRAG FORCES FROM THE SIDE OF THE POWDER ENVIRONMENT ON THE PARTS MOVEMENT DURING THE MAGNETO-ABRASIVE FINISHING IN THE ANNULAR BATH
The influence of the technological parameters of the magneto-abrasive finishing (MAF) process on the drag forces to the parts movement of different sizes and shapes, made of ferro- and paramagnetic materials, which act from the side of the ferro-abrasive powder medium formed from various powders in the magneto-abrasive tool (MAT) was investigated. The features of the interaction of the structural elements of the MAT with the surfaces being finished are determined. The influence of the magnetic field strength on the drag forces of the movement of the parts of different sizes and shapes in the MAT was established. It was shown that the process of interaction of MAT with the surfaces of samples being finished with characteristic dimensions up to 12 mm in the annular bath with a width of 35 mm occurs in the "free flow around" mode, while the MAF of samples with characteristic dimensions larger than 12 mm occurs in the "flow around" and "jamming" mode of representative volumes of the MAT between the pole tips and the surface being finished – in the zone of the formed little moving dead zone. With the increase in the size of the MAT particles from 200/100 μm to 400/315 μm, the relative value by which the drag forces increase is 1.25–1.65, which is explained by the greater magnetization of larger powders and their formations in the composition of the MAT and, accordingly its greater rigidity.
- 3 November 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2(8),p. 134-139
Open AccessINVESTIGATION OF THE DRAG FORCES FROM THE SIDE OF THE POWDER ENVIRONMENT ON THE PARTS MOVEMENT DURING THE MAGNETO-ABRASIVE FINISHING IN THE ANNULAR BATH
The influence of the technological parameters of the magneto-abrasive finishing (MAF) process on the drag forces to the parts movement of different sizes and shapes, made of ferro- and paramagnetic materials, which act from the side of the ferro-abrasive powder medium formed from various powders in the magneto-abrasive tool (MAT) was investigated. The features of the interaction of the structural elements of the MAT with the surfaces being finished are determined. The influence of the magnetic field strength on the drag forces of the movement of the parts of different sizes and shapes in the MAT was established. It was shown that the process of interaction of MAT with the surfaces of samples being finished with characteristic dimensions up to 12 mm in the annular bath with a width of 35 mm occurs in the "free flow around" mode, while the MAF of samples with characteristic dimensions larger than 12 mm occurs in the "flow around" and "jamming" mode of representative volumes of the MAT between the pole tips and the surface being finished – in the zone of the formed little moving dead zone. With the increase in the size of the MAT particles from 200/100 μm to 400/315 μm, the relative value by which the drag forces increase is 1.25–1.65, which is explained by the greater magnetization of larger powders and their formations in the composition of the MAT and, accordingly its greater rigidity.
- 23 May 2023
- Published by Springer Nature
- p. 270-281
Damage Mechanisms of Multilayer Axisymmetric Shells Obtained by the FDM Method
- 23 May 2023
- Published by Springer Nature
- p. 270-281
Damage Mechanisms of Multilayer Axisymmetric Shells Obtained by the FDM Method
- Open Access
- 13 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 7 (1 (97)) , 61-67
Analysis of the forces acting from the side of the magneto-abrasive tool on parts being machined during magneto-abrasive machining in conditions of the annular bath with large working gaps
Background. For effective magneto-abrasive machining (MAM) of complex-shaped parts, comprehensive information is needed on the processes that occur when the magneto-abrasive tool (MAT) contacts with the surfaces being machined. Effective magneto-abrasive machining occurs in the presence of sufficient values of the normal and tangential components of the interaction forces between the MAT and the machined surfaces and the powder mixing during machining. Previously carried out analytical studies of dynamic parameters did not take into account the real conditions of the interaction of grains and their groups with machined surfaces. Objective. Complex analysis of the processes that occur during magneto-abrasive machining of parts made from different types of materials, based on the results of the study of the friction forces between the magneto-abrasive tool and the surface being machined and the drag forces during the movement of parts in the working zone of the machine. Methods. To achieve the set goal, the forces acting on the samples during their magneto-abrasive machining were measured with subsequent analytical analysis. Results. The complex analysis of the processes occurring during MAM in conditions of the annular working zone with large working gaps of parts made of various materials was carried out based on the results of the study of the friction and drag forces that occur when the part moves relative to the magneto-abrasive tool. Conclusions. It has been determined that when machining non-magnetic samples at the constant value of the magnetic field in the working zone, the specific drag forces are practically independent of the shape of the used powder. According to the analytical representation of the friction and drag forces, their ratio between their specific values was calculated. By the nature of the change in this ratio, it was found that it decreases with an increase in the velocity of samples movement along the working zone, and with an increase in the angular velocity of rotation of the samples around its axis, this value increases in the studied velocity range. It has been determined that at the velocity of movement along the working zone of 2.2 m/s, there is a slight increase in the ratio between the specific forces of friction and drag, which is associated with the action of ponderomotive forces that appear near the surface of the machined parts and lead to an increase in local magnetic forces in these zones.
- 13 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 7 (1 (97)) , 61-67
Open AccessAnalysis of the forces acting from the side of the magneto-abrasive tool on parts being machined during magneto-abrasive machining in conditions of the annular bath with large working gaps
Background. For effective magneto-abrasive machining (MAM) of complex-shaped parts, comprehensive information is needed on the processes that occur when the magneto-abrasive tool (MAT) contacts with the surfaces being machined. Effective magneto-abrasive machining occurs in the presence of sufficient values of the normal and tangential components of the interaction forces between the MAT and the machined surfaces and the powder mixing during machining. Previously carried out analytical studies of dynamic parameters did not take into account the real conditions of the interaction of grains and their groups with machined surfaces. Objective. Complex analysis of the processes that occur during magneto-abrasive machining of parts made from different types of materials, based on the results of the study of the friction forces between the magneto-abrasive tool and the surface being machined and the drag forces during the movement of parts in the working zone of the machine. Methods. To achieve the set goal, the forces acting on the samples during their magneto-abrasive machining were measured with subsequent analytical analysis. Results. The complex analysis of the processes occurring during MAM in conditions of the annular working zone with large working gaps of parts made of various materials was carried out based on the results of the study of the friction and drag forces that occur when the part moves relative to the magneto-abrasive tool. Conclusions. It has been determined that when machining non-magnetic samples at the constant value of the magnetic field in the working zone, the specific drag forces are practically independent of the shape of the used powder. According to the analytical representation of the friction and drag forces, their ratio between their specific values was calculated. By the nature of the change in this ratio, it was found that it decreases with an increase in the velocity of samples movement along the working zone, and with an increase in the angular velocity of rotation of the samples around its axis, this value increases in the studied velocity range. It has been determined that at the velocity of movement along the working zone of 2.2 m/s, there is a slight increase in the ratio between the specific forces of friction and drag, which is associated with the action of ponderomotive forces that appear near the surface of the machined parts and lead to an increase in local magnetic forces in these zones.
- Open Access
- 29 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 6 (3)
Influence of magneto-abrasive machining on the characteristics of the surface layer of flat parts
The paper presents the study of the influence of the process of magneto-abrasive machining (MAM) on the characteristics of the surface layers of flat surfaces of parts made of ferromagnetic material U9 by machining with end-type heads based on high-power permanent magnets that form a magneto-abrasive tool of the "brush" type. For estimation of the influence of the process of magneto-abrasive machining on the surface layer, the parameters of surface hardness were analyzed after the machining of test samples with different powders and under different modes. The degree of influence of the MAM on the surface, both in terms of the hardness of the surface layer and the deformation of samples due to compressive residual stresses arising as a result of machining, was studied. The estimation of the state of the surface layer was performed by the change in hardness after machining, the magnitude of the degree of hardening, to some extent, by the parameters of roughness. The control of changes in internal residual stresses formed in the surface layers of samples due to the interaction of powder particles with the surface during machining was carried out according to the degree of their deformation after MAM. It was found that due to MAM, internal compressive stresses of 30–100 MPa arise in the near-surface layer of the material of the samples, while the magnitude of the stresses varied in inverse dependency, that is, with an increase in the working gap, in the vast majority of cases, a decrease in the magnitude of the stresses was observed. It was shown that the depth of the hardened layer under different machining conditions is up to 200 µm or more, and the strengthening coefficient varies from 10 to 40%.
- 29 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 6 (3)
Open AccessInfluence of magneto-abrasive machining on the characteristics of the surface layer of flat parts
The paper presents the study of the influence of the process of magneto-abrasive machining (MAM) on the characteristics of the surface layers of flat surfaces of parts made of ferromagnetic material U9 by machining with end-type heads based on high-power permanent magnets that form a magneto-abrasive tool of the "brush" type. For estimation of the influence of the process of magneto-abrasive machining on the surface layer, the parameters of surface hardness were analyzed after the machining of test samples with different powders and under different modes. The degree of influence of the MAM on the surface, both in terms of the hardness of the surface layer and the deformation of samples due to compressive residual stresses arising as a result of machining, was studied. The estimation of the state of the surface layer was performed by the change in hardness after machining, the magnitude of the degree of hardening, to some extent, by the parameters of roughness. The control of changes in internal residual stresses formed in the surface layers of samples due to the interaction of powder particles with the surface during machining was carried out according to the degree of their deformation after MAM. It was found that due to MAM, internal compressive stresses of 30–100 MPa arise in the near-surface layer of the material of the samples, while the magnitude of the stresses varied in inverse dependency, that is, with an increase in the working gap, in the vast majority of cases, a decrease in the magnitude of the stresses was observed. It was shown that the depth of the hardened layer under different machining conditions is up to 200 µm or more, and the strengthening coefficient varies from 10 to 40%.
- Open Access
- 1 October 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2,p. 16-22
INVESTIGATION OF THE DRAG FORCES ARISING IN THE MAGNETO-ABRASIVE TOOL DURING THE FINISHING OF CYLINDRICAL PARTS IN THE ANNULAR BATH
The method has been developed and systematic studies have been carried out to measure the drag forces, that exerted by a magneto-abrasive tool on machined cylindrical parts with a diameter of 16 mm and the height of 30 mm, made of para-, ferro- and diamagnetic materials, in an annular working zone with the diameter of 200 mm with the working height of 30 mm at machining speeds in the range of 1 - 3 m / s, magnetic induction in the working areas varying in the range of 0.2 - 0.25 T. It is shown that the drag forces significantly depend on the magnetic and rheological properties of the magneto-abrasive tool. During magneto-abrasive finishing (MAF), the drag force for non-magnetic parts is almost the same and does not depend on the machining speed, and with an increase in magnetic induction in the working areas, its linear growth takes place. The coefficient of magnification of drag force determined by the magnetic field, for powders with a particle size of 400/315 µm is 960 N/T, and for a size of 200/100 µm it is 720 N/T. It is shown that the drag forces during the MAF of ferromagnetic parts vary in the range from 160 to 220 N and are 1.2–1.45 times higher than for non-magnetic parts, which is due to the action of forces of magnetic origin, the features of the interaction of structural elements of MAT with machined surfaces and the formation of blocking up zones between the surface of the part and the pole pieces of the annular bath. The periodic change in the drag forces of the MAT of the workpiece was established near their average value, and at elevated MAF speeds of more than 2–2.5 m/s, instabilities were recorded associated with a periodic decrease in the oscillation amplitudes of the drag forces as a result of rearrangement, changes in the dimensions and volumes of the structural elements of the magneto-abrasive tool and the conditions of their interaction with the machined surfaces.
- 1 October 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 2,p. 16-22
Open AccessINVESTIGATION OF THE DRAG FORCES ARISING IN THE MAGNETO-ABRASIVE TOOL DURING THE FINISHING OF CYLINDRICAL PARTS IN THE ANNULAR BATH
The method has been developed and systematic studies have been carried out to measure the drag forces, that exerted by a magneto-abrasive tool on machined cylindrical parts with a diameter of 16 mm and the height of 30 mm, made of para-, ferro- and diamagnetic materials, in an annular working zone with the diameter of 200 mm with the working height of 30 mm at machining speeds in the range of 1 - 3 m / s, magnetic induction in the working areas varying in the range of 0.2 - 0.25 T. It is shown that the drag forces significantly depend on the magnetic and rheological properties of the magneto-abrasive tool. During magneto-abrasive finishing (MAF), the drag force for non-magnetic parts is almost the same and does not depend on the machining speed, and with an increase in magnetic induction in the working areas, its linear growth takes place. The coefficient of magnification of drag force determined by the magnetic field, for powders with a particle size of 400/315 µm is 960 N/T, and for a size of 200/100 µm it is 720 N/T. It is shown that the drag forces during the MAF of ferromagnetic parts vary in the range from 160 to 220 N and are 1.2–1.45 times higher than for non-magnetic parts, which is due to the action of forces of magnetic origin, the features of the interaction of structural elements of MAT with machined surfaces and the formation of blocking up zones between the surface of the part and the pole pieces of the annular bath. The periodic change in the drag forces of the MAT of the workpiece was established near their average value, and at elevated MAF speeds of more than 2–2.5 m/s, instabilities were recorded associated with a periodic decrease in the oscillation amplitudes of the drag forces as a result of rearrangement, changes in the dimensions and volumes of the structural elements of the magneto-abrasive tool and the conditions of their interaction with the machined surfaces.
- Open Access
- 28 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 1,p. 66-73
SPECIFIC FEATURES OF MAGNETO-ABRASIVE MACHINING OF CARBIDE TOOLS WITH PROTECTIVE CHAMFERS ON THE CUTTING EDGES
To ensure the durability and working ability of cutting tools, especially carbide, it is promising to form a rational microgeometry of working surfaces, in particular, the shape and geometry of cutting edges, as well as their hardening. For this, it is necessary to carry out additional machining of the tool after its sharpening operation. The magneto-abrasive machining method in conditions of large working gaps with a rational ratio of the impact and frictional interaction of the magneto-abrasive tool with the machined elements makes it possible to form microgeometry and strengthen both the cutting edges and the working surfaces. To ensure effective machining, it is necessary to determine the regularities of forming the microgeometry of the cutting edges with pre-made protective chamfers. The paper presents the results of a complex study of the magneto-abrasive machining process of carbide not sharpened inserts with protective chamfers on the cutting edges made at different angles. It was shown that the process of edge rounding is linearly related to the duration of magneto-abrasive machining. Moreover, the rate of increase in the size of the radius of cutting edges rounding with protective chamfers increases linearly with an increase in the angle of inclination of the chamfers, all other process conditions being equal. The physical description of the hardening mechanism of the surface layer of the working elements of the carbide cutting tool was proposed. It was shown that the hardening process is associated with the rational imposition of forces arising as a result of the frictional and impact interaction of the particles and the formations of the magneto-abrasive tool with the machined surfaces. It was found that the nature of the change in surface hardness obtained after magneto-abrasive machining on the protective chamfers has the wavy shape depending on the time of the process. The greatest increase in surface hardness takes place on chamfers made at angles of 10 ° and 20 ° and is explained by the value of the ratio between the forces of normal and tangential origin arising from the contact of the magneto-abrasive tool with the machined surfaces.
- 28 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
- No. 1,p. 66-73
Open AccessSPECIFIC FEATURES OF MAGNETO-ABRASIVE MACHINING OF CARBIDE TOOLS WITH PROTECTIVE CHAMFERS ON THE CUTTING EDGES
To ensure the durability and working ability of cutting tools, especially carbide, it is promising to form a rational microgeometry of working surfaces, in particular, the shape and geometry of cutting edges, as well as their hardening. For this, it is necessary to carry out additional machining of the tool after its sharpening operation. The magneto-abrasive machining method in conditions of large working gaps with a rational ratio of the impact and frictional interaction of the magneto-abrasive tool with the machined elements makes it possible to form microgeometry and strengthen both the cutting edges and the working surfaces. To ensure effective machining, it is necessary to determine the regularities of forming the microgeometry of the cutting edges with pre-made protective chamfers. The paper presents the results of a complex study of the magneto-abrasive machining process of carbide not sharpened inserts with protective chamfers on the cutting edges made at different angles. It was shown that the process of edge rounding is linearly related to the duration of magneto-abrasive machining. Moreover, the rate of increase in the size of the radius of cutting edges rounding with protective chamfers increases linearly with an increase in the angle of inclination of the chamfers, all other process conditions being equal. The physical description of the hardening mechanism of the surface layer of the working elements of the carbide cutting tool was proposed. It was shown that the hardening process is associated with the rational imposition of forces arising as a result of the frictional and impact interaction of the particles and the formations of the magneto-abrasive tool with the machined surfaces. It was found that the nature of the change in surface hardness obtained after magneto-abrasive machining on the protective chamfers has the wavy shape depending on the time of the process. The greatest increase in surface hardness takes place on chamfers made at angles of 10 ° and 20 ° and is explained by the value of the ratio between the forces of normal and tangential origin arising from the contact of the magneto-abrasive tool with the machined surfaces.