APAgus Sigit Pramono

Agus Sigit Pramono

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Agus Sigit Pramono has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Review of Design Strategies and Material Challenges for Magnesium-Based Rechargeable Seawater Batteries: Insights from Sodium-RSB Systems

    by Rezza Ruzuqi, Agus Sigit Pramono, Lukman Noerochim

    Rechargeable seawater batteries (RSBs) are a new class of seawater-based energy storage technology. In this system, the two electrolytes—the non-aqueous anolyte and seawater as the catholyte—have distinct compositions. As an eco-friendly option, the technology is promising, with the potential to replace traditional rechargeable batteries and reduce harmful environmental impacts. It can also be used in locales without access to power. There are different classes of RSBs, including sodium-based (Na-RSBs). At present, Na-RSBs systems have attracted much more attention due to the availability of solvents derived from abundant sodium sources in seawater and because of their superior material costs and safety compared to lithium (Li)-based batteries. Nonetheless, Na-RSBs are inherently restricted by the relatively low theoretical capacity and electrochemical potential of sodium. As a result, magnesium-based rechargeable seawater batteries (Mg-RSBs) have emerged as a promising alternative. Magnesium is attractive because it offers a higher theoretical volumetric capacity (~3833 mAh cm⁻³) and a better cost-performance ratio than Li-ion batteries and Na-RSB systems. Given these merits, we summarize the potential of magnesium as a candidate alternative to sodium in RSB applications. To develop their potential, some strategies (alloying, surface modification, bifunctional catalyst design, and solid–liquid hybrid electrolyte construction) are proposed. The perspective concludes with an outlook that emphasizes the importance of accounting for integrated electrolyte–separator design, interface manipulation, and corrosion-mitigation strategies to realize the potential of Mg-RSBs as a high-durability, long-life, and economical battery system, especially in off-grid applications.

  • Numerical Investigation of the Thermal Performance of Lattice Structures

    by Ahmad Anas Arifin, I. Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono

  • Open Access

    Comparative analysis of bio-inspired and topology-optimized lattices under compressive loading

    by Ahmad Anas Arifin, I Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono

    Lattice structure design is still dominated by strut-based forms and surface-based shapes, such as triply periodic minimal surfaces (TPMS), which both exhibit overlapping limitations. Strut lattices often show strong anisotropy because their response depends heavily on cell orientation, while TPMS lattices are difficult to adjust when bounded by geometric constraints. These conditions eventually led to stagnation in the development of lattice morphology. Hybrid and topology-optimization methods have appeared as possible alternatives, but many of them still produce modified versions of classical patterns. This study examined two lattice geometries: the Pyramorph, inspired by the shape of a pyramid, and the Topomorph, generated through a topology optimization framework. Both structures were designed using a CAD unit cell patterning technique and manufactured using the FDM method, with relative densities ranging from 0.40 to 0.44. Their mechanical behaviour was examined through FEA simulation and uniaxial compression testing. The parameter variations included cell orientations of 0°, 15°, 30°, and 45°, and cell sizes of 8 mm and 12 mm within a 24 mm specimen. The Topomorph showed superior strength, reaching 15–20 MPa, while the Pyramorph reached only 7–8 MPa. The highest value, about 20.5 MPa, was obtained from the Topomorph at 0° and with an 8 mm cell size. Failure modes indicated buckling and delamination in the Pyramorph, while the Topomorph tended to collapse progressively. These findings indicate that topology optimization combined with CAD-based patterning could significantly improve lattice performance.


  • Open Access

    Technological Evolution and Safety Enhancement of Automatic Couplers in Modern Railway Systems: A Systematic Review

    by Jean Mario Valentino, Achmad Syaifudin, Yohanes Pringeten Dilianto Sembiring Depari, Subekti, Agus Sigit Pramono, Lukman Shalahuddin, Helena Carolina Kis Agustin, Muhammad Nur Afnan Uda, Uda Hashim

    The global railway industry is undergoing a significant transformation toward a safer, more efficient, and sustainable transportation system, in which the automatic coupler serves as a vital component ensuring connectivity, safety, and operational reliability of train formations. Despite rapid technological advancements, existing research on automatic couplers remains fragmented, with limited integration between mechanical design, energy efficiency, and safety aspects. This study is aimed at systematically analyzing the technological evolution of automatic couplers in railway systems through a systematic literature review (SLR) approach based on the PRISMA protocol, utilizing literature indexed in Scopus and Web of Science from 2000 to 2025. The collected data were thematically analyzed to identify research trends, coupler classifications, and their contributions to operational efficiency and safety. The findings reveal a clear evolution from conventional mechanical coupling systems toward the digital automatic coupler (DAC), which integrates mechanical, electropneumatic, and digital communication functions. These innovations have proven to enhance efficiency by reducing longitudinal forces, extending fatigue life, and minimizing maintenance costs while simultaneously strengthening safety through energy absorption systems, high‐strength materials, and synchronized digital brake control. Scientifically, this study provides a novel contribution by offering a comprehensive mapping of the technological trajectory of automatic couplers and emphasizing the urgency of integrating mechanical and digital design principles to support automation and sustainability in the future of railway systems.

  • Open Access

    Numerical and experimental investigation of scaling laws in PLA octet-truss lattice structures under compression load

    by Muhammad Yusri Dzal Yahya, Agus Sigit Pramono

    The demand for lightweight materials with superior strength-to-weight ratios in modern industry has driven innovation in architectural materials. Lattice structures, enabled by advances in Additive Manufacturing (AM), present a promising solution. However, their mechanical performance often deviates from theoretical predictions due to the complexity of the fabrication process, particularly in Fused Deposition Modeling (FDM) technology, which is prone to process defects and size effects. This study aims to address the discrepancy between scaling-law predictions and the actual mechanical response of an Octet-Truss lattice structure fabricated from Polylactic Acid (PLA) using FDM. This study specifically investigates the effects of geometric scaling up/down (0.75x, 1x, and, 1.25x) and the number of periodic unit cells (1 - 8) on compressive response up to the yield limit. To validate the compression behavior, this study combined Finite Element Analysis (FEA) with experimental compression testing of FDM-fabricated PLA specimens. A highly accurate linear regression model (R² 99.7%) was formulated, relating maximum compression force (Fmax) to the number of unitcells (ncell), with FEA predictions aligning with experimental results within a 1.70% error margin. This empirical scaling law facilitates accurate predictions of load-bearing capacity across a range of lattice configurations (with cell sizes ranging from 15 to 25 mm cell sizes ) and load predictions ranging from 312 to 2,847 N for all tested configurations. This contributes to the development of a practical and reliable predictive design tool for lightweight structural engineering applications.

  • PID Control for Radial Active Magnetic Bearings

    by Rizqa Ruviana, Agus Sigit Pramono

  • Isotropic Body-Centered Cubic (BCC) Lattice Structure Design

    by Ahmad Anas Arifin, I. Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono


  • Open Access

    Investigation of discrepancies in isotropic material and structural properties in lattice frameworks

    by Ahmad Anas Arifin, I Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono

    Lattice structures have developed as a vital component in advanced engineering applications due to their superior strength-to-weight ratios and adjustable mechanical properties. This paper focuses on examining the correlation between the isotropic features of lattices at the material level and their structural performance. The research used near-isotropic Crossing-cylinder (CC)- Body Centered Cubic (BCC) cells in various orientations and sizes. Both experimental analysis and finite element analysis were used to examine the compressive strength of the structure in each orientation. The results reveal that cell orientation is important for determining failure modes and mechanical performance at the structural level. At 0°, the lattice has higher compressive strength and energy absorption due to effective load transfer via CC-aligned struts. In contrast, higher orientations (e.g., 15°, 30°, and 45°) are dominated by collapse-type failures, indicating anisotropic behavior in an otherwise isotropic design. Smaller cell sizes have more strength at lower orientations due to their higher relative density, but larger cells perform better at higher orientations.


  • Open Access

    Development of an Automatic Coupler for Railway Vehicles: A Topology Optimization Approach with Numerical and Experimental Validation

    by Jean Mario Valentino, Agus Sigit Pramono, Achmad Syaifudin, Lukman Shalahuddin, Mustasyar Perkasa, Katsuhiko Sasaki

    Topology optimization has demonstrated its effectiveness in generating lightweight and structurally efficient designs. This study focuses on refining the geometry of an automatic coupler body for trains using solid isotropic material with penalization and a level set method. These optimization methods are applied to the numerical model of the automatic coupler, and their results are compared to select the optimal design. The tensile strength of the automatic coupler is examined through numerical simulations and validated by experimental tensile tests conducted on a 1:1 scale prototype. The optimization outcomes reveal a remarkable 46.41% reduction in the mass of the automatic coupler body compared to the initial model. An evaluation of the tensile strength of the prototype demonstrates the ability of the automatic coupler to withstand the primary load without undergoing plastic deformation. Furthermore, a strong correlation is observed between the numerical and experimental results. This research contributes to advancing the design of next-generation automatic couplers, emphasizing the crucial aspects of lightweight design and structural performance.


  • Experimental Study of Linear Profile Modification in Spur Gear Leg

    by Agus Sigit Pramono, Alief Wikarta, Fakhul Mu’iz

    Gears with the involute profile are assumed to be rigid and good at producing mating gear. They are also deformable and deflectable, indicating additional space is required to avoid interference from the unpredictable shaft, misalignment, and dynamic factors. In addition, load and rotational speed cause frequent mild to severe interference leading to a significant reduction in its lifespan. This study conducted an experimental comparison between standard and modification involute gear profiles in a ratio of 1:2 to reduce interference. It was carried out using 18 pinion teeth with a 72 mm base diameter at three and four levels of torque load and speed. The load was also mounted a strain gauge on pinion gears to conduct strain measurement on the gear leg. Finally, it was applied using a mechanical brake measured by a dynamic torque meter. The experimental test obtained microstrain when the modified spur gear contacted for 3.04 – 6.67 milliseconds depending on the rotation speed and torque load. Modification of the linear involute profile significantly reduced the tooth leg strain at the rate of 5.6% to 13.99%. Meanwhile, the maximum microstrain reduction of 13.99% occurred at a speed of 1100 rpm and a torque load of 65%.