MSMin Sun

Min Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Min Sun has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modification Mechanism and Performance of High-Content Polyurethane-Modified Asphalt

    by Wei Zhuang, Shuaiyu Ren, Baoju Liu, Tingting Ding, Lizheng Liu, Luyao Gu, Min Sun

    To explore the influence of the polyurethane blending ratio on the micro-characteristics of polyurethane-modified asphalt, three samples of the modified asphalt with different blending ratios (40%, 50%, and 60%) were prepared. Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were employed to elucidate the modification mechanism of polyurethane-modified asphalt. To investigate how the preparation method affects the performance of polyurethane-modified asphalt mixtures, two different preparation methods, namely internal blending and external blending, were adopted. The road performance of the polyurethane-modified asphalt mixtures was evaluated through the utilization of rutting tests, low-temperature trabecular bending tests, and freeze–thaw splitting tests. The FTIR test results indicate that during the modification of polyurethane, there is a change in both the intensity and position of the absorption peak, which affects the local arrangement of the molecular structure. Upon reaching a polyurethane blending ratio of 50%, a cross-linked network structure that is similar to polyurethane is formed. The results of the AFM test demonstrate that an increase in polyurethane content results in a corresponding increase in surface roughness. At a polyurethane content of 50%, the curing reaction is most effective, which is beneficial for enhancing the bonding performance between the asphalt and the aggregate, thereby enhancing the overall water stability of the mixture. The results of the scanning electron microscopy (SEM) tests indicate that the microstructure is more stable when the polyurethane content is 50%. The results of the performance test of the polyurethane-modified asphalt mixture indicate that the dynamic stability of the polyurethane-modified asphalt mixture is approximately four times that of the SBS-modified asphalt mixture. The flexural tensile strength and maximum flexural strain of the polyurethane-modified asphalt mixture are, respectively, 1.5 and 3.2 times those of the SBS-modified asphalt mixture, indicating that its anti-deformation ability is stronger in a low-temperature environment, and it is found that the low-temperature performance of the mixture prepared with the internal blending method is better than that with the external blending method. The splitting strength of the polyurethane asphalt mixture before and after freezing and thawing is greater than that of an SBS asphalt mixture: before freezing and thawing, by about 3.8 times; after freezing and thawing, by about 3 times. Although the freezing and thawing of the polyurethane mixture has damage, it still meets the requirements of the use of pavement materials. It can be observed that the incorporation of polyurethane alters the internal structure of the asphalt, which markedly enhances the properties of the asphalt mixture and offers a novel perspective on the development of modified asphalt materials.


  • Open Access

    Preparation Scheme Optimization of Thermosetting Polyurethane Modified Asphalt

    by Min Sun, Shuo Jing, Haibo Wu, Jun Zhong, Yongfu Yang, Ye Zhu, Qingpeng Xu

    To solve the issue of the poor temperature stability of conventional modified asphalt, polyurethane (PU) was used as a modifier with its corresponding curing agent (CA) to prepare thermosetting PU asphalt. First, the modifying effects of the different types of PU modifiers were evaluated, and the optimal PU modifier was then selected. Second, a three-factor and three-level L9 (33) orthogonal experiment table was designed based on the preparation technology, PU dosage, and CA dosage to prepare the thermosetting PU asphalt and asphalt mixture. Further, the effect of PU dosage, CA dosage, and preparation technology on the 3d, 5d, and 7d splitting tensile strength, freeze-thaw splitting strength, and tensile strength ratio (TSR) of the PU asphalt mixture was analyzed, and a PU-modified asphalt preparation plan was recommended. Finally, a tension test was conducted on the PU-modified asphalt and a split tensile test was performed on the PU asphalt mixture to analyze their mechanical properties. The results show that the content of PU has a significant effect on the splitting tensile strength of PU asphalt mixtures. When the content of the PU modifier is 56.64% and the content of CA is 3.58%, the performance of the PU-modified asphalt and mixture is better when prepared by the prefabricated method. The PU-modified asphalt and mixture have high strength and plastic deformation ability. The modified asphalt mixture has excellent tensile performance, low-temperature performance, and water stability, which meets the requirements of epoxy asphalt and the mixture standards.


  • Open Access

    Mechanism of Polyurethane Binder Curing Reaction and Evaluation of Polyurethane Mixture Properties

    by Min Sun, Yufeng Bi, Wei Zhuang, Sai Chen, Pinhui Zhao, Dezheng Pang, Wensheng Zhang

    This study focuses on analyzing the curing reaction mechanism of polyurethane (PU) binders and comprehensively evaluating the PU mixture’s properties. The former was investigated by conducting a Fourier transform infrared spectroscopy (FTIR) test on PU binders with different curing times. The volume change characteristics, construction operation time, and strength formation law were clarified through the splitting tensile test of PU mixtures under different environmental conditions. The optimal PU mixture stacking time and curing time under different environmental conditions were determined. The properties of the PU mixture and asphalt mixture were evaluated and compared through a rutting test, low-temperature bending test, freeze–thaw splitting test, and four-point bending fatigue test. The results show that the physical and chemical curing of the PU binder occurred within the first 24 h of curing, and the reaction speed gradually accelerated to form a polyurea structure 24 h later. It is recommended to stack the PU mixture for 4 h before compaction and to cure it for 2 days before opening under the conditions of 50% humidity and 15–40 °C surrounding temperature. The PU mixture shows better temperature stability and fatigue resistance than the asphalt mixture, and the splitting tensile strength of the PU mixture before and after the freeze–thaw splitting test is also higher. It is clear that the PU mixture is a green road building material with good performance.