SCSai Chen

Sai Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sai Chen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Interlaminar Shear Characteristics, Energy Consumption, and Carbon Emissions of Polyurethane Mixtures

    by Yufeng Bi, Min Sun, Shuo Jing, Derui Hou, Wei Zhuang, Sai Chen, Xuwang Jiao, Quanman Zhao

    The interlaminar shear characteristics of a polyurethane (PU) mixture composite structure, quantitatively calculating its energy consumption and carbon emissions were analyzed in this study. Inclined shear tests were carried out on thirteen structures without interlaminar treatment, and high-temperature water bath accelerated loading tests were conducted on three composite structures; further, the interlaminar shear strength of the tire trace position after the accelerated loading test was tested to analyze the influence of both the high-temperature water bath environment and loading on the structure. In addition, based on the medium repair project of the Qingdao-Yinchuan expressway, the construction log of PU mixture pavement and asphalt pavement was investigated. Combined with the calculation parameters provided by the United Nations Intergovernmental Panel on Climate Change (IPCC), the consumption and carbon emissions of the two types of mixtures were calculated and compared quantitatively. The results showed that the shear strength between layers of asphalt mixtures, PU mixture and asphalt mixture was less than 2 MPa; however, the shear strength between PU mixture–cement-stabilized macadam and PU mixture–PU mixture was greater than 3 MPa. Therefore, it was recommended to spread a 0.4 L/m2 two-component PU adhesive layer as the interlayer treatment scheme for the structure of asphalt mixture-PU mixture and PU mixture-asphalt mixture; the high-temperature water area and accelerated loading had different effects on the interlaminar shear strength of the three structures. The PUM-16 mixture could effectively reduce energy consumption by 88.3 and 87.2%, carbon emissions by 81.1% and 79.1% in comparison to Stone Matrix asphalt with Nominal maximum particle size of 13.2 mm (SMA-13) and Stone Matrix asphalt with Nominal maximum particle size of 19.0 mm (SMA-20). Thus, the PU mixture was confirmed to be an environmentally friendly road pavement material.


  • Open Access

    Mechanism of Polyurethane Binder Curing Reaction and Evaluation of Polyurethane Mixture Properties

    by Min Sun, Yufeng Bi, Wei Zhuang, Sai Chen, Pinhui Zhao, Dezheng Pang, Wensheng Zhang

    This study focuses on analyzing the curing reaction mechanism of polyurethane (PU) binders and comprehensively evaluating the PU mixture’s properties. The former was investigated by conducting a Fourier transform infrared spectroscopy (FTIR) test on PU binders with different curing times. The volume change characteristics, construction operation time, and strength formation law were clarified through the splitting tensile test of PU mixtures under different environmental conditions. The optimal PU mixture stacking time and curing time under different environmental conditions were determined. The properties of the PU mixture and asphalt mixture were evaluated and compared through a rutting test, low-temperature bending test, freeze–thaw splitting test, and four-point bending fatigue test. The results show that the physical and chemical curing of the PU binder occurred within the first 24 h of curing, and the reaction speed gradually accelerated to form a polyurea structure 24 h later. It is recommended to stack the PU mixture for 4 h before compaction and to cure it for 2 days before opening under the conditions of 50% humidity and 15–40 °C surrounding temperature. The PU mixture shows better temperature stability and fatigue resistance than the asphalt mixture, and the splitting tensile strength of the PU mixture before and after the freeze–thaw splitting test is also higher. It is clear that the PU mixture is a green road building material with good performance.