Gryhorii Ivanchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gryhorii Ivanchenko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Koshevyi
Київський національний університет будівництва і архітектури
6 shared publications - Galyna Getun
Київський національний університет будівництва і архітектури
4 shared publications - Iryna Bezklubenko
Kyiv National University of Construction and Architecture
4 shared publications - Andrii Solomin
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
3 shared publications Григорій Іванченко
Київський національний університет будівництва і архітектури
3 shared publications- Andrii Kozak
Kyiv National University of Construction and Architecture
2 shared publications
Latest Publications
- Open Access
- 5 June 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 110,p. 139-153
OPTIMAL DESIGN OF MINIMAL SURFACE SHELLS USING THE PARAMETRIC EXTENSION METHOD AND THE FINITE ELEMENT METHOD
Optimal design of thin-walled spatial structures is essential for reducing the effects of active external loads. Applying this methodology makes it possible to develop an algorithm for determining their geometric shape that will perform effectively under combined thermal and mechanical loads. Optimal design in structural and applied mechanics is divided into several types. The main types include: parametric, topological, shape optimization (morphological), and optimization of physical and mechanical properties (modulus of elasticity and Poisson’s ratio). This scientific publication explores the essence of shape optimization for thin-walled spatial structures, which include minimal surface shells. Multi-criteria parametric optimization is defined by specific parameters. The primary parameter is the weight or volume of the minimal surface shell. Additional parameters, though no less important, for studying the stress-strain state of minimal surface shells are strength characteristics. They allow for the use of a general method for analyzing all building structures, based on the second group of limit states. The formulation of an optimal design problem involving minimal surface envelopes can be linear, geometrically nonlinear, physically nonlinear, or time-varying. Using the method of parameter extension and proprietary software, a point mesh of minimal surface shells with an optimal shape is generated. This information is loaded into the Femap with Nastran simulation suite via interface modules. Based on this transfer, the final construction of the geometry of the minimal surface shells takes place, namely: surfaces, curves, and the necessary points. Using the finite element method and the parameter extension method, the optimal shape of the shells of minimal surfaces on a given contour was determined. Such minimal surface shells include: a minimal surface shell on a rectangular contour; a minimal surface shell with a rectangular plan, consisting of two straight lines and two circular arcs; a minimal surface shell on a square plan; a minimal surface shell on a trapezoidal contour; a two-boundary minimal surface on a circular contour; the envelope of a minimal surface consisting of two oblique ellipses on a circular contour. The application of this approach makes it possible to employ several types of optimal design on a single object of study, which is a pressing challenge for optimization theory, structural engineering, and applied and structural mechanics.
- 5 June 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 110,p. 139-153
Open AccessOPTIMAL DESIGN OF MINIMAL SURFACE SHELLS USING THE PARAMETRIC EXTENSION METHOD AND THE FINITE ELEMENT METHOD
Optimal design of thin-walled spatial structures is essential for reducing the effects of active external loads. Applying this methodology makes it possible to develop an algorithm for determining their geometric shape that will perform effectively under combined thermal and mechanical loads. Optimal design in structural and applied mechanics is divided into several types. The main types include: parametric, topological, shape optimization (morphological), and optimization of physical and mechanical properties (modulus of elasticity and Poisson’s ratio). This scientific publication explores the essence of shape optimization for thin-walled spatial structures, which include minimal surface shells. Multi-criteria parametric optimization is defined by specific parameters. The primary parameter is the weight or volume of the minimal surface shell. Additional parameters, though no less important, for studying the stress-strain state of minimal surface shells are strength characteristics. They allow for the use of a general method for analyzing all building structures, based on the second group of limit states. The formulation of an optimal design problem involving minimal surface envelopes can be linear, geometrically nonlinear, physically nonlinear, or time-varying. Using the method of parameter extension and proprietary software, a point mesh of minimal surface shells with an optimal shape is generated. This information is loaded into the Femap with Nastran simulation suite via interface modules. Based on this transfer, the final construction of the geometry of the minimal surface shells takes place, namely: surfaces, curves, and the necessary points. Using the finite element method and the parameter extension method, the optimal shape of the shells of minimal surfaces on a given contour was determined. Such minimal surface shells include: a minimal surface shell on a rectangular contour; a minimal surface shell with a rectangular plan, consisting of two straight lines and two circular arcs; a minimal surface shell on a square plan; a minimal surface shell on a trapezoidal contour; a two-boundary minimal surface on a circular contour; the envelope of a minimal surface consisting of two oblique ellipses on a circular contour. The application of this approach makes it possible to employ several types of optimal design on a single object of study, which is a pressing challenge for optimization theory, structural engineering, and applied and structural mechanics.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Geometric modeling of solar radiation zones on curved airport terminals coverings during their reconstruction
The article considers the current problem of energy-efficient modernization of large transport hubs through optimization of the use of solar energy. The object of the study is the processes of formation of insolation zones on complex curved surfaces of coatings of modern airport terminals using solar-receiving devices. The authors analyze the specifics of the reconstruction of existing terminals, where changing the roof configuration may be limited by load-bearing structures.The geometry is selected at the pre-design stage, taking into account the requirements for the location of the building relative to the runway (runway), passenger flow conditions, structural safety, and architectural and economic factors. A geometric modeling algorithm based on discrete geometry and computer-aided design methods is proposed. This allows for accurate calculation of the solar radiation intensity at each point of a curved roof, taking into account geographical coordinates and seasonal changes.Two types of surfaces were selected for analysis - an ellipsoid of revolution and a hyperbolic paraboloid. The developed model allows you to determine the most effective areas for placing photovoltaic panels (BIPV systems) and solar heating systems.Graphical and analytical dependences of the distribution of radiation fluxes were obtained, which allow minimizing overheating of premises in the summer and maximizing heat gain in the winter. The proposed approach to determining effective solar radiation zones allows optimizing the shape of the airport terminal's coverage at the pre-design stage. This ensures a balance between urban planning constraints (orientation relative to the runway) and energy independence requirements. If the selected geometry does not provide sufficient insolation, the algorithm involves iteratively searching for shape options or changing the functional purpose of the solar system (for example, switching from full energy supply to hot water supply only).
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessGeometric modeling of solar radiation zones on curved airport terminals coverings during their reconstruction
The article considers the current problem of energy-efficient modernization of large transport hubs through optimization of the use of solar energy. The object of the study is the processes of formation of insolation zones on complex curved surfaces of coatings of modern airport terminals using solar-receiving devices. The authors analyze the specifics of the reconstruction of existing terminals, where changing the roof configuration may be limited by load-bearing structures.The geometry is selected at the pre-design stage, taking into account the requirements for the location of the building relative to the runway (runway), passenger flow conditions, structural safety, and architectural and economic factors. A geometric modeling algorithm based on discrete geometry and computer-aided design methods is proposed. This allows for accurate calculation of the solar radiation intensity at each point of a curved roof, taking into account geographical coordinates and seasonal changes.Two types of surfaces were selected for analysis - an ellipsoid of revolution and a hyperbolic paraboloid. The developed model allows you to determine the most effective areas for placing photovoltaic panels (BIPV systems) and solar heating systems.Graphical and analytical dependences of the distribution of radiation fluxes were obtained, which allow minimizing overheating of premises in the summer and maximizing heat gain in the winter. The proposed approach to determining effective solar radiation zones allows optimizing the shape of the airport terminal's coverage at the pre-design stage. This ensures a balance between urban planning constraints (orientation relative to the runway) and energy independence requirements. If the selected geometry does not provide sufficient insolation, the algorithm involves iteratively searching for shape options or changing the functional purpose of the solar system (for example, switching from full energy supply to hot water supply only).
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 89-98
Multi-criteria parametric optimization of the strength and weight of a shell of a minimum surface on a square contour under thermal and power loading, taking into account geometric nonlinearity
In applied and structural mechanics, many examples of optimal design with different objective functions are considered, but there is a need to take research in this area to a new level. The object under study with two or three simultaneous types of optimization is an actual applied problem in the field of construction and applied mechanics. One of the main tasks of designing minimal surfaces is to find the optimal shell shapes for given overall dimensions and shape in plan, taking into account parametric optimization - it is necessary to implement a modern optimization algorithm in the calculation of this structure. Its solution should be brought to ready-made formulas, graphs, tables, calculation examples and practical. The system of solving equations of the finite element method is formed using the Lagrange's variational principle, according to which the total potential energy P of a finite element model of a body is in a state of stability and equilibrium has a minimum value. Within the framework of the study, a methodology for obtaining the ratio of the finite element method with regard to geometric nonlinearity is presented that does not depend on the shape and properties of the finite elements, so it can be implemented for a plate finite element of a shell of minimal surface. To study the multicriteria parametric optimization of the minimum surface shell with regard to geometric nonlinearity, a special additional optimizer module created by the authors is used, which is linked to the Femap with Nastran calculation complex [12]. The computational model is built by the finite element method, which makes it possible to perform a qualitative study of optimization taking into account the objective functions: Mises stress and structural weight. This methodology proves to be effective in the study of multi-criteria parametric optimization with consideration of geometric nonlinearity. Such an approach to the calculation of building structures makes it possible to use structural materials efficiently, and modern calculation complexes based on the finite element method (FEM) can be used in further development at the level of building codes of Ukraine.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 89-98
Open AccessMulti-criteria parametric optimization of the strength and weight of a shell of a minimum surface on a square contour under thermal and power loading, taking into account geometric nonlinearity
In applied and structural mechanics, many examples of optimal design with different objective functions are considered, but there is a need to take research in this area to a new level. The object under study with two or three simultaneous types of optimization is an actual applied problem in the field of construction and applied mechanics. One of the main tasks of designing minimal surfaces is to find the optimal shell shapes for given overall dimensions and shape in plan, taking into account parametric optimization - it is necessary to implement a modern optimization algorithm in the calculation of this structure. Its solution should be brought to ready-made formulas, graphs, tables, calculation examples and practical. The system of solving equations of the finite element method is formed using the Lagrange's variational principle, according to which the total potential energy P of a finite element model of a body is in a state of stability and equilibrium has a minimum value. Within the framework of the study, a methodology for obtaining the ratio of the finite element method with regard to geometric nonlinearity is presented that does not depend on the shape and properties of the finite elements, so it can be implemented for a plate finite element of a shell of minimal surface. To study the multicriteria parametric optimization of the minimum surface shell with regard to geometric nonlinearity, a special additional optimizer module created by the authors is used, which is linked to the Femap with Nastran calculation complex [12]. The computational model is built by the finite element method, which makes it possible to perform a qualitative study of optimization taking into account the objective functions: Mises stress and structural weight. This methodology proves to be effective in the study of multi-criteria parametric optimization with consideration of geometric nonlinearity. Such an approach to the calculation of building structures makes it possible to use structural materials efficiently, and modern calculation complexes based on the finite element method (FEM) can be used in further development at the level of building codes of Ukraine.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 131-138
Mathematical model of the stress-strain state of multilayered structures with different elastic properties
The article examines the features of stress-strain state of structures made of two and multilayer elements. The relevance of use of multi-layer load-bearing structures in rapidly constructed protective structures in Ukraine under conditions of possible shock-explosive and fire damage is justified.The method of interpolating trigonometric Lagrange polynomials in mixed plane problems of theelasticity theory is described. In the problems of elasticity theoryfor the regionunder conditions of planar setting, two of the four boundary conditions are known. It is proposed permissive system of integral equations relative to an unknown pair of boundary conditions on each side of the area under consideration, based on the solution of theorem on reciprocity of work and reciprocity of displacements for a plane under the influence of a unit force.Solutions for each of the sides of region are built by developing the Multopa-Kalandia collocation method. The boundary conditions are the result of solving the system of integral equations. Features on the contour, namely points of application of unit forces, boundary breaks, etc., are taken into account by additional functions that are introduced into the kernels of integral expressions in the form of coefficients of the required boundary conditions.To represent the cumbersome functions of movements and stresses of multilayer structures in a compact form, the apparatus of the theory of functions of a complex variable is used, which leads to compact expressions that are convenient for programming. To obtain more accurate solutions and reduce the duration of computer programs, all ordinary and singular integrals given in the work are calculated analytically, that is, the system of integral equations to be solved is reduced to a system of linear algebraic equations with unknown density functions at the interpolation points.The proposed mathematical model provides the universality inherent in general numerical methods and allows to study the general stress-strain state of multilayer structures and local effects in zones of junction of layers with different elastic properties.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 113,p. 131-138
Open AccessMathematical model of the stress-strain state of multilayered structures with different elastic properties
The article examines the features of stress-strain state of structures made of two and multilayer elements. The relevance of use of multi-layer load-bearing structures in rapidly constructed protective structures in Ukraine under conditions of possible shock-explosive and fire damage is justified.The method of interpolating trigonometric Lagrange polynomials in mixed plane problems of theelasticity theory is described. In the problems of elasticity theoryfor the regionunder conditions of planar setting, two of the four boundary conditions are known. It is proposed permissive system of integral equations relative to an unknown pair of boundary conditions on each side of the area under consideration, based on the solution of theorem on reciprocity of work and reciprocity of displacements for a plane under the influence of a unit force.Solutions for each of the sides of region are built by developing the Multopa-Kalandia collocation method. The boundary conditions are the result of solving the system of integral equations. Features on the contour, namely points of application of unit forces, boundary breaks, etc., are taken into account by additional functions that are introduced into the kernels of integral expressions in the form of coefficients of the required boundary conditions.To represent the cumbersome functions of movements and stresses of multilayer structures in a compact form, the apparatus of the theory of functions of a complex variable is used, which leads to compact expressions that are convenient for programming. To obtain more accurate solutions and reduce the duration of computer programs, all ordinary and singular integrals given in the work are calculated analytically, that is, the system of integral equations to be solved is reduced to a system of linear algebraic equations with unknown density functions at the interpolation points.The proposed mathematical model provides the universality inherent in general numerical methods and allows to study the general stress-strain state of multilayer structures and local effects in zones of junction of layers with different elastic properties.
- Open Access
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 284-295
Design calculations and study of the assembly and technological indicators of coating's consolidated structural blocks
The article considers and implements the calculation model of the system using the design and calculation complex LIRA. The features of load perception and their rational distribution between structural elements are analyzed. The stress-strain state is calculated, taking into account the subsequent installation of the structure. The approach to determining the labor-intensiveness and duration of consolidation processes during the installation of structural blocks of the covering, which is caused by atypical structural and technological solutions, is considered. Modern approaches to the process of consolidation of structural blocks of coatings are analyzed. The use of load-lifting assembly modules is proposed to reduce the specific share of the use of heavy crane equipment at the construction site. The method of installation of a structural coating with the use of heavy crane equipment and load-lifting installation modules is compared.
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 284-295
Open AccessDesign calculations and study of the assembly and technological indicators of coating's consolidated structural blocks
The article considers and implements the calculation model of the system using the design and calculation complex LIRA. The features of load perception and their rational distribution between structural elements are analyzed. The stress-strain state is calculated, taking into account the subsequent installation of the structure. The approach to determining the labor-intensiveness and duration of consolidation processes during the installation of structural blocks of the covering, which is caused by atypical structural and technological solutions, is considered. Modern approaches to the process of consolidation of structural blocks of coatings are analyzed. The use of load-lifting assembly modules is proposed to reduce the specific share of the use of heavy crane equipment at the construction site. The method of installation of a structural coating with the use of heavy crane equipment and load-lifting installation modules is compared.
- Open Access
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 39-48
Іnfluence of explosive loads on buildings and structures of the population civil protection
The article substantiates the relevance of the design and construction of buildings and structures of the Ukraine population civil protection in the conditions of possible shock-explosive influences. The aim of the work is to systematize information about the impact of explosive loads on building structures and develop recommendations for improving the stability of buildings and civil protection structures.The influence of shock wave during the detonation of explosives on the structures of buildings is considered and systematized. The features of distribution of pressure of blast wave on the structures of buildings in time, depending on magnitude of their distances to the epicenter of the explosion, are analyzed. The features of the influence of blast wave, which expands from the source of detonation, on low-rise buildings with flat roofs and the sequence of development of deformations and destruction of their structures at three stages of wave propagation are revealed. The nature of the influence of blast wave on multi-storey and high-rise buildings and the sequence of development of deformations and destruction of their structures are analyzed. Examples of destruction of structures of buildings of various structural systems from explosions are given.The paper gives recommendations for design of blast-resistant buildings with built-in bomb shelters that are able to resist explosive loads without progressive collapse, which leads to a cascading sequence of damage to adjacent building structures. The ways of redistribution of gravitational loads on the structural systems of buildings and structures are analyzed, recommendations are made for design of explosion-proof buildings.Conclusions are drawn about the feasibility of using monolithic reinforced concrete frames, which are able to plastically deform, redistribute loads and resist the onset of progressive collapse, which leads to appearance of a cascading sequence of damage to adjacent building structures.
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 39-48
Open AccessІnfluence of explosive loads on buildings and structures of the population civil protection
The article substantiates the relevance of the design and construction of buildings and structures of the Ukraine population civil protection in the conditions of possible shock-explosive influences. The aim of the work is to systematize information about the impact of explosive loads on building structures and develop recommendations for improving the stability of buildings and civil protection structures.The influence of shock wave during the detonation of explosives on the structures of buildings is considered and systematized. The features of distribution of pressure of blast wave on the structures of buildings in time, depending on magnitude of their distances to the epicenter of the explosion, are analyzed. The features of the influence of blast wave, which expands from the source of detonation, on low-rise buildings with flat roofs and the sequence of development of deformations and destruction of their structures at three stages of wave propagation are revealed. The nature of the influence of blast wave on multi-storey and high-rise buildings and the sequence of development of deformations and destruction of their structures are analyzed. Examples of destruction of structures of buildings of various structural systems from explosions are given.The paper gives recommendations for design of blast-resistant buildings with built-in bomb shelters that are able to resist explosive loads without progressive collapse, which leads to a cascading sequence of damage to adjacent building structures. The ways of redistribution of gravitational loads on the structural systems of buildings and structures are analyzed, recommendations are made for design of explosion-proof buildings.Conclusions are drawn about the feasibility of using monolithic reinforced concrete frames, which are able to plastically deform, redistribute loads and resist the onset of progressive collapse, which leads to appearance of a cascading sequence of damage to adjacent building structures.
- Open Access
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 102-112
A numerical study of the multicriteria parametric optimization of the displacement and weight of a two-connected conical shell of minimal surface under thermal and power loading
Various methods and approaches are used to solve the problem of optimal design. Problems of this type are used for the optimal design of spatial coverings, which in modern architecture are progressive structures that are of interest to the whole world. Spatial coatings allow to give the building architectural expressiveness, cover large spans and combine load-bearing and enclosing functions. The hulls of minimal surfaces are the hulls of negative Gaussian curvature. In general, the geometry of minimal surfaces cannot be described analytically. To solve this problem, which is associated with solving the differential equation that describes the minimal surface in general, under appropriate boundary conditions, one has to use methods of numerical analysis. This approach allows us to build a point frame of the shell, which is a matrix of discrete solutions of functions that searches for a given minimum surface. In view of this, its geometric characteristics can be obtained only in numerical form. The basic relations of the linear theory of thin elastic shells of minimal surface are highlighted in the numerical study of parametric optimization. The mathematical justifications of how the external load is perceived and the process of creating the stress-strain state of the shells of minimal surfaces are highlighted. For the numerical implementation of the multicriteria parametric optimization of a double-connected conical shell of minimal surface, a finite element model was built from plate finite elements in the amount of 4824 pieces and 4896 nodes. The perimeter is rigidly clamped to the ground disk. The thermal force load is set, which consists of a combination of static and temperature loads. The developed methodology shows quite good results that coincide with the works of other authors and makes it possible to use two types of optimization for one research object simultaneously. The first stage is shape optimization, and the second stage is multicriteria parametric optimization. This methodology makes it possible to perform optimization processes in an automated mode, which is an important applied task for construction and applied mechanics.
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 111,p. 102-112
Open AccessA numerical study of the multicriteria parametric optimization of the displacement and weight of a two-connected conical shell of minimal surface under thermal and power loading
Various methods and approaches are used to solve the problem of optimal design. Problems of this type are used for the optimal design of spatial coverings, which in modern architecture are progressive structures that are of interest to the whole world. Spatial coatings allow to give the building architectural expressiveness, cover large spans and combine load-bearing and enclosing functions. The hulls of minimal surfaces are the hulls of negative Gaussian curvature. In general, the geometry of minimal surfaces cannot be described analytically. To solve this problem, which is associated with solving the differential equation that describes the minimal surface in general, under appropriate boundary conditions, one has to use methods of numerical analysis. This approach allows us to build a point frame of the shell, which is a matrix of discrete solutions of functions that searches for a given minimum surface. In view of this, its geometric characteristics can be obtained only in numerical form. The basic relations of the linear theory of thin elastic shells of minimal surface are highlighted in the numerical study of parametric optimization. The mathematical justifications of how the external load is perceived and the process of creating the stress-strain state of the shells of minimal surfaces are highlighted. For the numerical implementation of the multicriteria parametric optimization of a double-connected conical shell of minimal surface, a finite element model was built from plate finite elements in the amount of 4824 pieces and 4896 nodes. The perimeter is rigidly clamped to the ground disk. The thermal force load is set, which consists of a combination of static and temperature loads. The developed methodology shows quite good results that coincide with the works of other authors and makes it possible to use two types of optimization for one research object simultaneously. The first stage is shape optimization, and the second stage is multicriteria parametric optimization. This methodology makes it possible to perform optimization processes in an automated mode, which is an important applied task for construction and applied mechanics.
- Open Access
- 6 July 2023
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 104,p. 80-99
OPTIMAL DESIGN OF FORCED FREQUENCY OF OSCILATIONS OF A SHELL OF MINIMAL SURFACE WITH RECTANGULAR PLAN CONSISTING OF TWO STRAIGHT LINES AND TWO SEMI-CIRCLES UNDER THERMAL LOADING
Optimal design of a structure is currently one of the most relevant sections in structural and applied mechanics. The theory of mathematical programming and the emergence of computers had a great influence on the optimal design of structures in the late 40s. This greatly expanded the range of structures and physical models that became available for optimal design. The use of analytical optimization methods leads to success only when considering the simplest structures. Therefore, numerical methods for finding optimal parameters, which are PC-oriented, have become widespread in optimal design. Designing is the most critical stage of creating a structure, during which technical characteristics are determined and the feasibility of the goal is checked. An integrated approach is required to take into account all requirements, and this is the main difficulty of optimal design. The process of creating an optimal structure is highly dependent on the optimization method, which plays a key role in the design of structures for various purposes. This scientific article considers an integrated approach to the optimal design of the forced frequencies of a shell of a minimal surface with a square plan consisting of two straight lines and two semicircles under thermal and power loading. The numerical study of the optimization calculation was carried out as follows: the objective function is the weight of the minimum surface shell, the design variables are the thickness of the minimum surface shell from 1 mm to 100 mm, and the constraint is represented as the first forced vibration frequency of 0.2 Hz. Based on the results of the numerical study, the weight of the minimum surface shell decreased by 11.2%, the first forced vibration frequency is 0.2 Hz, which meets the specified constraint. We can draw a general conclusion that the author's methodology and the use of his own software make it possible to perform an effective optimization calculation for shells of minimal surfaces, and the use of two types of optimization types on one research object is an important applied problem for civil and applied mechanics
- 6 July 2023
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 104,p. 80-99
Open AccessOPTIMAL DESIGN OF FORCED FREQUENCY OF OSCILATIONS OF A SHELL OF MINIMAL SURFACE WITH RECTANGULAR PLAN CONSISTING OF TWO STRAIGHT LINES AND TWO SEMI-CIRCLES UNDER THERMAL LOADING
Optimal design of a structure is currently one of the most relevant sections in structural and applied mechanics. The theory of mathematical programming and the emergence of computers had a great influence on the optimal design of structures in the late 40s. This greatly expanded the range of structures and physical models that became available for optimal design. The use of analytical optimization methods leads to success only when considering the simplest structures. Therefore, numerical methods for finding optimal parameters, which are PC-oriented, have become widespread in optimal design. Designing is the most critical stage of creating a structure, during which technical characteristics are determined and the feasibility of the goal is checked. An integrated approach is required to take into account all requirements, and this is the main difficulty of optimal design. The process of creating an optimal structure is highly dependent on the optimization method, which plays a key role in the design of structures for various purposes. This scientific article considers an integrated approach to the optimal design of the forced frequencies of a shell of a minimal surface with a square plan consisting of two straight lines and two semicircles under thermal and power loading. The numerical study of the optimization calculation was carried out as follows: the objective function is the weight of the minimum surface shell, the design variables are the thickness of the minimum surface shell from 1 mm to 100 mm, and the constraint is represented as the first forced vibration frequency of 0.2 Hz. Based on the results of the numerical study, the weight of the minimum surface shell decreased by 11.2%, the first forced vibration frequency is 0.2 Hz, which meets the specified constraint. We can draw a general conclusion that the author's methodology and the use of his own software make it possible to perform an effective optimization calculation for shells of minimal surfaces, and the use of two types of optimization types on one research object is an important applied problem for civil and applied mechanics
- Open Access
- 26 June 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 110,p. 108-117
Features of design and calculations of complex reinforced concrete frames of buildings
The article considers and systematizes the load-bearing structural systems of buildings with complex space-planning configurations, taking into account design solutions, structural loading and stress states. The features of the perception of loads and their rational distribution between the structural elements of frame buildings with complex space-planning solutions are analyzed. The main structural schemes of complex frames, schemes of their deformations and plots of moments under the influence of vertical and horizontal loads are introduced. The paper reflects the modern practice of preliminary approximate calculations of the approximate dimensions of the sections of frame structures of frame buildings for the possibility of further collecting loads and performing refined calculations using modern calculation software systems. The proposed method for modeling the nature of the work of complex frames of frame buildings and coordinating their space-planning, design and calculation systems will be useful for researchers, architects and design engineers during the design of new types of buildings, taking into account their operation under emergency conditions.
- 26 June 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 110,p. 108-117
Open AccessFeatures of design and calculations of complex reinforced concrete frames of buildings
The article considers and systematizes the load-bearing structural systems of buildings with complex space-planning configurations, taking into account design solutions, structural loading and stress states. The features of the perception of loads and their rational distribution between the structural elements of frame buildings with complex space-planning solutions are analyzed. The main structural schemes of complex frames, schemes of their deformations and plots of moments under the influence of vertical and horizontal loads are introduced. The paper reflects the modern practice of preliminary approximate calculations of the approximate dimensions of the sections of frame structures of frame buildings for the possibility of further collecting loads and performing refined calculations using modern calculation software systems. The proposed method for modeling the nature of the work of complex frames of frame buildings and coordinating their space-planning, design and calculation systems will be useful for researchers, architects and design engineers during the design of new types of buildings, taking into account their operation under emergency conditions.
- Open Access
- 2 June 2023
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (51) , 218-233
Optimal design of the forced oscillation frequencies of the minimum surface shell on a circular contour consisting of two inclined ellipses under thermal and power loading
The problem of choosing the optimal design solution is a multi-purpose complex task, the solution of which requires taking into account a wide range of requirements for different stages of implementation. There are several levels of solving optimal design problems. The first level deals with general design models, including the main structural elements, taking into account the physical and geometric features of their behavior. This level can be called the "global" level of optimization. Due to the fact that the automated calculation of structures is impossible without the use of finite element models, and at the next "detailed" level, the parameters that make up this model (coordinates of nodes, physical and geometric properties of individual elements, etc.) The choice of a finite element model for optimal design is directly related to the complexity (the possibility of computer implementation) of the optimal design problem. To reduce the computational procedures associated with solving the problem of numerical analysis, an approach based on the approximation of system parameters (displacements, forces, frequencies, waveforms, etc.) can be used. The problem of forced oscillations for shells of minimal surfaces is solved by the finite element method using the Lagrange's variational principle. The potential and kinetic deformation energies of the shell of a minimal surface are defined in matrix form as the sum of the potential and kinetic energies of each finite element. The optimization algorithm for single-criterion parametric optimization is performed as follows: the objective function is the weight of the shell of the minimum surface on a circular contour consisting of two inclined ellipses, the design variables are the thickness of the shell, and the constraints are represented by the first forced vibration frequency. The results of changing the objective function are a decrease in the weight of the shell by 3050 kg of C240 steel, which is a percentage equivalent of 13.4% without loss of strength and stability of the shell of the minimum surface on a circular contour consisting of two inclined ellipses, which proves the effectiveness of the authors' methodology.
- 2 June 2023
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (51) , 218-233
Open AccessOptimal design of the forced oscillation frequencies of the minimum surface shell on a circular contour consisting of two inclined ellipses under thermal and power loading
The problem of choosing the optimal design solution is a multi-purpose complex task, the solution of which requires taking into account a wide range of requirements for different stages of implementation. There are several levels of solving optimal design problems. The first level deals with general design models, including the main structural elements, taking into account the physical and geometric features of their behavior. This level can be called the "global" level of optimization. Due to the fact that the automated calculation of structures is impossible without the use of finite element models, and at the next "detailed" level, the parameters that make up this model (coordinates of nodes, physical and geometric properties of individual elements, etc.) The choice of a finite element model for optimal design is directly related to the complexity (the possibility of computer implementation) of the optimal design problem. To reduce the computational procedures associated with solving the problem of numerical analysis, an approach based on the approximation of system parameters (displacements, forces, frequencies, waveforms, etc.) can be used. The problem of forced oscillations for shells of minimal surfaces is solved by the finite element method using the Lagrange's variational principle. The potential and kinetic deformation energies of the shell of a minimal surface are defined in matrix form as the sum of the potential and kinetic energies of each finite element. The optimization algorithm for single-criterion parametric optimization is performed as follows: the objective function is the weight of the shell of the minimum surface on a circular contour consisting of two inclined ellipses, the design variables are the thickness of the shell, and the constraints are represented by the first forced vibration frequency. The results of changing the objective function are a decrease in the weight of the shell by 3050 kg of C240 steel, which is a percentage equivalent of 13.4% without loss of strength and stability of the shell of the minimum surface on a circular contour consisting of two inclined ellipses, which proves the effectiveness of the authors' methodology.