Oleksandr Koshevyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oleksandr Koshevyi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Gryhorii Ivanchenko
Київський національний університет будівництва і архітектури
6 shared publications Hryhorii Ivanchenko
4 shared publications- Inna Kosheva
Київський національний університет будівництва і архітектури, м. Київ
2 shared publications - Iryna Zhupanenko
Київський національний університет будівництва і архітектури
2 shared publications - Mykola Yovko
Київський національний університет будівництва і архітектури
2 shared publications Григорій Іванченко
Київський національний університет будівництва і архітектури
2 shared publications
Latest Publications
- Open Access
- 15 September 2026
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 3 (45),p. 265-274
Multicriteria parametric optimization of the stability of the sinusoidal cylindrical shell under thermo-mechanical loading
Optimal stability design of spatial structures has been practically not studied in structural and applied mechanics. The loss of stability of the shell is characterized by the coefficient λ and the forms of loss of stability, among which, as a rule, the first form is the main one. Analysis of research and publications on the issues of optimal design showed that the study of stability occurs most often with the following objective functions: weight, volume, cost of the structure, stress. Optimal stability design of cylindrical structures of complex contour is a fairly new direction in the inverse problems of structural and applied mechanics. Therefore, the formulation of numerical excrements in structural mechanics using modern software packages provides an opportunity to solve this new promising type of problems. The purpose of the article is to find the global optimum for material distribution that will ensure the minimum weight of the structure with a strict constraint on strength and ensure the overall stability of the shape of a sinusoidal cylindrical shell under thermal force loading. As a result of computer modeling of the optimal design of the shell stability, 30 mm thick, with a variation of the objective functions under the action of combined thermo-force loads, 10 forms of stability loss were identified. In a numerical study of multi-criteria parametric stability optimization, it was possible to implement a reduction in the shell weight objective function by almost 50% at a coefficient of λ>1, which corresponds to the permissible stability parameter. At the same time, a change in the shell thickness distribution from 11 to 30 mm was obtained. The presented materials can be used in the future to analyze the consequences of optimizing a straight sinusoidal shell for different objective functions and, with a larger material base, to choose which type of optimization to design structures according to the building codes of Ukraine.
- 15 September 2026
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 3 (45),p. 265-274
Open AccessMulticriteria parametric optimization of the stability of the sinusoidal cylindrical shell under thermo-mechanical loading
Optimal stability design of spatial structures has been practically not studied in structural and applied mechanics. The loss of stability of the shell is characterized by the coefficient λ and the forms of loss of stability, among which, as a rule, the first form is the main one. Analysis of research and publications on the issues of optimal design showed that the study of stability occurs most often with the following objective functions: weight, volume, cost of the structure, stress. Optimal stability design of cylindrical structures of complex contour is a fairly new direction in the inverse problems of structural and applied mechanics. Therefore, the formulation of numerical excrements in structural mechanics using modern software packages provides an opportunity to solve this new promising type of problems. The purpose of the article is to find the global optimum for material distribution that will ensure the minimum weight of the structure with a strict constraint on strength and ensure the overall stability of the shape of a sinusoidal cylindrical shell under thermal force loading. As a result of computer modeling of the optimal design of the shell stability, 30 mm thick, with a variation of the objective functions under the action of combined thermo-force loads, 10 forms of stability loss were identified. In a numerical study of multi-criteria parametric stability optimization, it was possible to implement a reduction in the shell weight objective function by almost 50% at a coefficient of λ>1, which corresponds to the permissible stability parameter. At the same time, a change in the shell thickness distribution from 11 to 30 mm was obtained. The presented materials can be used in the future to analyze the consequences of optimizing a straight sinusoidal shell for different objective functions and, with a larger material base, to choose which type of optimization to design structures according to the building codes of Ukraine.
- Open Access
- 5 June 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 110,p. 139-153
OPTIMAL DESIGN OF MINIMAL SURFACE SHELLS USING THE PARAMETRIC EXTENSION METHOD AND THE FINITE ELEMENT METHOD
Optimal design of thin-walled spatial structures is essential for reducing the effects of active external loads. Applying this methodology makes it possible to develop an algorithm for determining their geometric shape that will perform effectively under combined thermal and mechanical loads. Optimal design in structural and applied mechanics is divided into several types. The main types include: parametric, topological, shape optimization (morphological), and optimization of physical and mechanical properties (modulus of elasticity and Poisson’s ratio). This scientific publication explores the essence of shape optimization for thin-walled spatial structures, which include minimal surface shells. Multi-criteria parametric optimization is defined by specific parameters. The primary parameter is the weight or volume of the minimal surface shell. Additional parameters, though no less important, for studying the stress-strain state of minimal surface shells are strength characteristics. They allow for the use of a general method for analyzing all building structures, based on the second group of limit states. The formulation of an optimal design problem involving minimal surface envelopes can be linear, geometrically nonlinear, physically nonlinear, or time-varying. Using the method of parameter extension and proprietary software, a point mesh of minimal surface shells with an optimal shape is generated. This information is loaded into the Femap with Nastran simulation suite via interface modules. Based on this transfer, the final construction of the geometry of the minimal surface shells takes place, namely: surfaces, curves, and the necessary points. Using the finite element method and the parameter extension method, the optimal shape of the shells of minimal surfaces on a given contour was determined. Such minimal surface shells include: a minimal surface shell on a rectangular contour; a minimal surface shell with a rectangular plan, consisting of two straight lines and two circular arcs; a minimal surface shell on a square plan; a minimal surface shell on a trapezoidal contour; a two-boundary minimal surface on a circular contour; the envelope of a minimal surface consisting of two oblique ellipses on a circular contour. The application of this approach makes it possible to employ several types of optimal design on a single object of study, which is a pressing challenge for optimization theory, structural engineering, and applied and structural mechanics.
- 5 June 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 110,p. 139-153
Open AccessOPTIMAL DESIGN OF MINIMAL SURFACE SHELLS USING THE PARAMETRIC EXTENSION METHOD AND THE FINITE ELEMENT METHOD
Optimal design of thin-walled spatial structures is essential for reducing the effects of active external loads. Applying this methodology makes it possible to develop an algorithm for determining their geometric shape that will perform effectively under combined thermal and mechanical loads. Optimal design in structural and applied mechanics is divided into several types. The main types include: parametric, topological, shape optimization (morphological), and optimization of physical and mechanical properties (modulus of elasticity and Poisson’s ratio). This scientific publication explores the essence of shape optimization for thin-walled spatial structures, which include minimal surface shells. Multi-criteria parametric optimization is defined by specific parameters. The primary parameter is the weight or volume of the minimal surface shell. Additional parameters, though no less important, for studying the stress-strain state of minimal surface shells are strength characteristics. They allow for the use of a general method for analyzing all building structures, based on the second group of limit states. The formulation of an optimal design problem involving minimal surface envelopes can be linear, geometrically nonlinear, physically nonlinear, or time-varying. Using the method of parameter extension and proprietary software, a point mesh of minimal surface shells with an optimal shape is generated. This information is loaded into the Femap with Nastran simulation suite via interface modules. Based on this transfer, the final construction of the geometry of the minimal surface shells takes place, namely: surfaces, curves, and the necessary points. Using the finite element method and the parameter extension method, the optimal shape of the shells of minimal surfaces on a given contour was determined. Such minimal surface shells include: a minimal surface shell on a rectangular contour; a minimal surface shell with a rectangular plan, consisting of two straight lines and two circular arcs; a minimal surface shell on a square plan; a minimal surface shell on a trapezoidal contour; a two-boundary minimal surface on a circular contour; the envelope of a minimal surface consisting of two oblique ellipses on a circular contour. The application of this approach makes it possible to employ several types of optimal design on a single object of study, which is a pressing challenge for optimization theory, structural engineering, and applied and structural mechanics.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Optimal design of the stability of a minimum surface shell on a rectangular contour with accounting for geometric nonlinearity under thermo-stress loading
The field of optimal design for spatial thin-walled structures has been developing since the 1950s. In general, when studying optimal design, one must determine all optimized strength characteristics based on the second group of limit states. These strength characteristics include: strength, stability, deflections, and deformations in spatial thin-walled structures. The implementation of optimal design with these strength characteristics occurs simultaneously with the weight of the spatial thin-walled structure. Multi-criteria parametric optimization is achieved by incorporating two objective functions simultaneously into the mathematical framework and research methodology for spatial thin-walled structures. These include weight or volume, and strength characteristics. Such objective functions include: weight and strength, weight and stability, weight and deflections, and weight and forced or natural frequencies of vibration of a spatial thin-walled structure. The specificity of such studies lies in the fact that when investigating these objective functions, it is necessary to employ three different types of calculations. Optimal design problems can be formulated in both linear and nonlinear settings. Nonlinear formulations include geometric and physical ones. This scientific article examines the geometric nonlinear formulation, which allows for the consideration of actual displacements and stresses when determining the bifurcation point. The instability coefficient λ is, in fact, the bifurcation point of the minimal surface. The use of this algorithm leads to a new approach in the design of building structures. This type of optimal design offers significant economic benefits when creating future structures. This approach can be applied not only to shell structures but also to beam and plate structures. An important aspect is the material, which must be isotropic; this includes metals and composites. The analysis of the objective function is shown in Figure 1.14. We were able to reduce the weight of the minimal surface shell from 52,593 kg to 40,391 kg, which represents a 23.12% reduction. At the same time, we were able to redistribute the thickness of the minimal surface shell to the loaded zones, which made it possible to reduce the buckling coefficient λ from 2.58 to 1.06. This significant result was achieved through a geometrically nonlinear formulation of the problem. Automation, in the optimal design approach, makes it possible to determine the required thickness of the minimal surface shell.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessOptimal design of the stability of a minimum surface shell on a rectangular contour with accounting for geometric nonlinearity under thermo-stress loading
The field of optimal design for spatial thin-walled structures has been developing since the 1950s. In general, when studying optimal design, one must determine all optimized strength characteristics based on the second group of limit states. These strength characteristics include: strength, stability, deflections, and deformations in spatial thin-walled structures. The implementation of optimal design with these strength characteristics occurs simultaneously with the weight of the spatial thin-walled structure. Multi-criteria parametric optimization is achieved by incorporating two objective functions simultaneously into the mathematical framework and research methodology for spatial thin-walled structures. These include weight or volume, and strength characteristics. Such objective functions include: weight and strength, weight and stability, weight and deflections, and weight and forced or natural frequencies of vibration of a spatial thin-walled structure. The specificity of such studies lies in the fact that when investigating these objective functions, it is necessary to employ three different types of calculations. Optimal design problems can be formulated in both linear and nonlinear settings. Nonlinear formulations include geometric and physical ones. This scientific article examines the geometric nonlinear formulation, which allows for the consideration of actual displacements and stresses when determining the bifurcation point. The instability coefficient λ is, in fact, the bifurcation point of the minimal surface. The use of this algorithm leads to a new approach in the design of building structures. This type of optimal design offers significant economic benefits when creating future structures. This approach can be applied not only to shell structures but also to beam and plate structures. An important aspect is the material, which must be isotropic; this includes metals and composites. The analysis of the objective function is shown in Figure 1.14. We were able to reduce the weight of the minimal surface shell from 52,593 kg to 40,391 kg, which represents a 23.12% reduction. At the same time, we were able to redistribute the thickness of the minimal surface shell to the loaded zones, which made it possible to reduce the buckling coefficient λ from 2.58 to 1.06. This significant result was achieved through a geometrically nonlinear formulation of the problem. Automation, in the optimal design approach, makes it possible to determine the required thickness of the minimal surface shell.
- Open Access
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (57)
Multicriteria parametric optimization of the stability of the minimum surface shell on a trapezoidal contour taking into account geometric nonlinearity under thermo-stress loading
The approach to optimal design may vary depending on the types of optimization used. In this task, there is shape optimization (morphological optimization) and parametric optimization of the minimum surface shell. The selection of materials for studying the parametric optimization of minimum surface shells may not be limited to steel; other metals may also be used. The main thing is that the materials must be isotropic, i.e., have the same calculated resistance in all directions. Verification of optimization calculation results is performed in accordance with Ukrainian building codes. After completing the optimization calculation, it is possible to superimpose the results on the thickness of the minimum surface shell on a trapezoidal contour in the Femap with Nastran calculation complex, and then perform all strength checks (calculation of statics, stability, displacement, etc.). When all verification calculations have been performed, the design engineer independently adjusts the thickness of the minimum surface shell using the initial data from the optimization calculation and designs the final thickness of the spatial structure. Research into multi-criteria parametric optimization of stability and weight, taking into account geometric nonlinearity, is carried out using the Femap with Nastran software package. This is achieved through iterative loading and proprietary software. Finite elements: 912 plates. Nodes: 975. Connection to the ground disc – rigid clamping. Material: C275 steel. The change in stresses according to Mises occurred from the initial 99.9 MPa to 151.1 MPa, shown in Fig. 1.12, which does not exceed the ultimate strength of steel, which is 240 MPa. The initial thickness was 60 mm, after studying multi-criteria parametric optimization, it ranges from 10 mm to 68 mm, as shown in Fig. 1.13, depending on the load zone. Fig. 1.14 shows a graph of the objective functions of the stability coefficient λ and the weight of the minimum surface shell on a trapezoidal contour. The weight of the minimum surface shell decreased by 21.55% from the initial value. The stability loss coefficient decreased by 2.46 times, which is a fairly effective result.
- 26 February 2026
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (57)
Open AccessMulticriteria parametric optimization of the stability of the minimum surface shell on a trapezoidal contour taking into account geometric nonlinearity under thermo-stress loading
The approach to optimal design may vary depending on the types of optimization used. In this task, there is shape optimization (morphological optimization) and parametric optimization of the minimum surface shell. The selection of materials for studying the parametric optimization of minimum surface shells may not be limited to steel; other metals may also be used. The main thing is that the materials must be isotropic, i.e., have the same calculated resistance in all directions. Verification of optimization calculation results is performed in accordance with Ukrainian building codes. After completing the optimization calculation, it is possible to superimpose the results on the thickness of the minimum surface shell on a trapezoidal contour in the Femap with Nastran calculation complex, and then perform all strength checks (calculation of statics, stability, displacement, etc.). When all verification calculations have been performed, the design engineer independently adjusts the thickness of the minimum surface shell using the initial data from the optimization calculation and designs the final thickness of the spatial structure. Research into multi-criteria parametric optimization of stability and weight, taking into account geometric nonlinearity, is carried out using the Femap with Nastran software package. This is achieved through iterative loading and proprietary software. Finite elements: 912 plates. Nodes: 975. Connection to the ground disc – rigid clamping. Material: C275 steel. The change in stresses according to Mises occurred from the initial 99.9 MPa to 151.1 MPa, shown in Fig. 1.12, which does not exceed the ultimate strength of steel, which is 240 MPa. The initial thickness was 60 mm, after studying multi-criteria parametric optimization, it ranges from 10 mm to 68 mm, as shown in Fig. 1.13, depending on the load zone. Fig. 1.14 shows a graph of the objective functions of the stability coefficient λ and the weight of the minimum surface shell on a trapezoidal contour. The weight of the minimum surface shell decreased by 21.55% from the initial value. The stability loss coefficient decreased by 2.46 times, which is a fairly effective result.
- Open Access
- 5 February 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 109
MULTICRITERIA PARAMETRIC OPTIMIZATION OF THE STABILITY OF THE MINIMUM SURFACE SHELL ON A SQUARE PLAN UNDER THERMOSTRESS LOADING, TAKING INTO ACCOUNT GEO METRIC NONLINEARITY
Optimal design of spatial structures' stability has hardly been studied in construction and applied mechanics. Loss of shell stability is characterized by the coefficient λ and forms of stability loss; as a rule, the first form of stability loss is the main one. From the scientific field of optimal design, it is known that research is most often conducted on target functions: weight, volume, stress, and construction cost. Optimal design of the stability of spatial structures is a new direction in inverse problems in construction and applied mechanics. The combination of optimizing the weight of a spatial structure and its stability is quite interesting from the point of view of building structures. The type of tasks related to optimal stability design could not be developed earlier, but at the end of the 20th century, with the advent of powerful computer technology capable of solving large systems of equations, it became possible to perform numerical calculations in structural mechanics, which in turn revealed this new promising type of task. Various types of loads can be used: static, thermal, seismic, dynamic, impact, electromagnetic, and others. This scientific article uses a thermo-mechanical load, which combines static influences and thermal load. An important element is geometric nonlinearity. Closely related to geometric nonlinearity is the problem of stability of building structures as a whole. A deforming body is in a stable state of equilibrium if there is a small change in the configuration of the geometry. The article reveals theoretical information on calculating the stability of thin shells, taking into account geometric nonlinearity. The results of the study of multi-criteria parametric optimization of the stability of a minimal surface shell on a square contour, taking into account geometric nonlinearity. It was possible to reduce the target function of the weight of the minimal surface shell with a coefficient λ=1, which corresponds to the minimum stability parameter. In the future, it will be possible to analyze the results of optimizing the minimum surface shell on a square plan for different objective functions and select the type of optimization for designing structures in accordance with Ukrainian building codes.
- 5 February 2026
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 109
Open AccessMULTICRITERIA PARAMETRIC OPTIMIZATION OF THE STABILITY OF THE MINIMUM SURFACE SHELL ON A SQUARE PLAN UNDER THERMOSTRESS LOADING, TAKING INTO ACCOUNT GEO METRIC NONLINEARITY
Optimal design of spatial structures' stability has hardly been studied in construction and applied mechanics. Loss of shell stability is characterized by the coefficient λ and forms of stability loss; as a rule, the first form of stability loss is the main one. From the scientific field of optimal design, it is known that research is most often conducted on target functions: weight, volume, stress, and construction cost. Optimal design of the stability of spatial structures is a new direction in inverse problems in construction and applied mechanics. The combination of optimizing the weight of a spatial structure and its stability is quite interesting from the point of view of building structures. The type of tasks related to optimal stability design could not be developed earlier, but at the end of the 20th century, with the advent of powerful computer technology capable of solving large systems of equations, it became possible to perform numerical calculations in structural mechanics, which in turn revealed this new promising type of task. Various types of loads can be used: static, thermal, seismic, dynamic, impact, electromagnetic, and others. This scientific article uses a thermo-mechanical load, which combines static influences and thermal load. An important element is geometric nonlinearity. Closely related to geometric nonlinearity is the problem of stability of building structures as a whole. A deforming body is in a stable state of equilibrium if there is a small change in the configuration of the geometry. The article reveals theoretical information on calculating the stability of thin shells, taking into account geometric nonlinearity. The results of the study of multi-criteria parametric optimization of the stability of a minimal surface shell on a square contour, taking into account geometric nonlinearity. It was possible to reduce the target function of the weight of the minimal surface shell with a coefficient λ=1, which corresponds to the minimum stability parameter. In the future, it will be possible to analyze the results of optimizing the minimum surface shell on a square plan for different objective functions and select the type of optimization for designing structures in accordance with Ukrainian building codes.
- Open Access
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Multicriteria parametric optimization of the strength of an aluminum cylindrical shell taking into account geometric nonlinearity under thermostress loading
Shells are thin-walled spatial structures that have the most efficient shape for transferring external forces with minimal material consumption. Thermal stress, which arises from the simultaneous action of mechanical forces and significant temperature fields or gradients, significantly complicates the behavior of shell structures. Traditional design methods, which are based primarily on strength at fixed geometric parameters, are often insufficient. They can lead to excessive strength reserves (increased weight and cost) or, conversely, fail to ensure reliability by ignoring nonlinear interaction effects. This is why there is a need for parametric optimization—a method that allows for systematic investigation of the influence of numerous design variables (geometric, material, thermal) on the behavior of a structure and finding its optimal configurations according to a given criterion. Parametric optimization, unlike topological or shape-forming optimization, aims to find the best values for a fixed set of parameters (thickness, radius of gyration, angle of inclination). As part of the sensitivity analysis, the gradients of the design variables and displacements are calculated as partial derivatives of these characteristics with respect to the design variables and shell thickness. The sensitivity information serves as the basis for constructing an optimal design algorithm using the gradient descent method of the objective function. After a numerical experiment in Fig. 1.3, the maximum Mises stresses are 240 MPa, with the shell thickness varying from 2 mm to 30 mm depending on the loading zone. The graph of objective functions shows a decrease in the weight of the aluminum cylindrical shell from 68,800 kg to 51,300 kg, which is 25.4% in percentage terms, while the Mises stress increased from 68 MPa to 240 MPa. All numerical studies were performed in an automated mode using proprietary software and the Femap with Nastran calculation complex. This numerical method is effective for studying the optimal design of spatial thin-walled structures under thermo-mechanical loading.
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Open AccessMulticriteria parametric optimization of the strength of an aluminum cylindrical shell taking into account geometric nonlinearity under thermostress loading
Shells are thin-walled spatial structures that have the most efficient shape for transferring external forces with minimal material consumption. Thermal stress, which arises from the simultaneous action of mechanical forces and significant temperature fields or gradients, significantly complicates the behavior of shell structures. Traditional design methods, which are based primarily on strength at fixed geometric parameters, are often insufficient. They can lead to excessive strength reserves (increased weight and cost) or, conversely, fail to ensure reliability by ignoring nonlinear interaction effects. This is why there is a need for parametric optimization—a method that allows for systematic investigation of the influence of numerous design variables (geometric, material, thermal) on the behavior of a structure and finding its optimal configurations according to a given criterion. Parametric optimization, unlike topological or shape-forming optimization, aims to find the best values for a fixed set of parameters (thickness, radius of gyration, angle of inclination). As part of the sensitivity analysis, the gradients of the design variables and displacements are calculated as partial derivatives of these characteristics with respect to the design variables and shell thickness. The sensitivity information serves as the basis for constructing an optimal design algorithm using the gradient descent method of the objective function. After a numerical experiment in Fig. 1.3, the maximum Mises stresses are 240 MPa, with the shell thickness varying from 2 mm to 30 mm depending on the loading zone. The graph of objective functions shows a decrease in the weight of the aluminum cylindrical shell from 68,800 kg to 51,300 kg, which is 25.4% in percentage terms, while the Mises stress increased from 68 MPa to 240 MPa. All numerical studies were performed in an automated mode using proprietary software and the Femap with Nastran calculation complex. This numerical method is effective for studying the optimal design of spatial thin-walled structures under thermo-mechanical loading.
- Open Access
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Multicriteria parametric optimization of the stability of the minimum surface shell on a circular contour, which consists of two inclined ellipses, taking into account geometricnonlinearity under thermostress loading
This scientific publication presents an interesting applied problem of numerical research into the optimal design of a spatial thin-walled structure under thermo-mechanical loading. Optimal design of load-bearing structures can be divided into four main types: parametric, topological, shape optimization, and creation of composite materials for a specific task. There may be combinations of two or more types of optimization on a single object under study. This scientific publication considers two types of optimal design on a single object under study. A minimal surface shell is a thin-walled spatial structure with a given contour and a certain specified height, which was subsequently constructed using the parameter continuation method. The parameter extension method makes it possible to construct the optimal shape of the future minimal surface shell, which minimizes the internal forces, which in turn reduce the Mises stress, which is decomposed into normal and tangential stresses, leading to a reduction in the thickness of the shell. Optimal design of load-bearing structures into four main types: parametric, topological, shape optimization, creation of composite materials for a specific task. There may be combinations of two or more types of optimization on a single object under study. Multi-criteria parametric optimization of the minimum surface shell is performed in an automated mode in the Femap with Nastran software package and connected proprietary software, which was developed for a specific area of scientific and technical activity within the framework of applied research. A theoretical formulation of the relationship between the loss of stability of the minimum surface shell on a circular plane is presented, taking into account geometric nonlinearity under thermo-mechanical loading. After optimization calculation based on Figures 2-11, the first form of stability loss is λ=1, which corresponds to the minimum limit before stability loss. Graph 13 shows the change in target functions. We managed to reduce the weight by 8.8 tons, which is 23%, while the coefficient λ decreased from 5.36 to 1.01, which is actually 6 times less. This calculation allows for the minimum thickness of the shell of the minimum surface before loss of stability.
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Open AccessMulticriteria parametric optimization of the stability of the minimum surface shell on a circular contour, which consists of two inclined ellipses, taking into account geometricnonlinearity under thermostress loading
This scientific publication presents an interesting applied problem of numerical research into the optimal design of a spatial thin-walled structure under thermo-mechanical loading. Optimal design of load-bearing structures can be divided into four main types: parametric, topological, shape optimization, and creation of composite materials for a specific task. There may be combinations of two or more types of optimization on a single object under study. This scientific publication considers two types of optimal design on a single object under study. A minimal surface shell is a thin-walled spatial structure with a given contour and a certain specified height, which was subsequently constructed using the parameter continuation method. The parameter extension method makes it possible to construct the optimal shape of the future minimal surface shell, which minimizes the internal forces, which in turn reduce the Mises stress, which is decomposed into normal and tangential stresses, leading to a reduction in the thickness of the shell. Optimal design of load-bearing structures into four main types: parametric, topological, shape optimization, creation of composite materials for a specific task. There may be combinations of two or more types of optimization on a single object under study. Multi-criteria parametric optimization of the minimum surface shell is performed in an automated mode in the Femap with Nastran software package and connected proprietary software, which was developed for a specific area of scientific and technical activity within the framework of applied research. A theoretical formulation of the relationship between the loss of stability of the minimum surface shell on a circular plane is presented, taking into account geometric nonlinearity under thermo-mechanical loading. After optimization calculation based on Figures 2-11, the first form of stability loss is λ=1, which corresponds to the minimum limit before stability loss. Graph 13 shows the change in target functions. We managed to reduce the weight by 8.8 tons, which is 23%, while the coefficient λ decreased from 5.36 to 1.01, which is actually 6 times less. This calculation allows for the minimum thickness of the shell of the minimum surface before loss of stability.
- Open Access
- 30 October 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 115
Parametric optimization of the stability and weight of a minimal surface shell taking into account geometric nonlinearity under thermomechanical loading
Optimal design plays an important role in the approach to and formation of building structures. This stage of structural calculation has been little studied and is virtually unused by practicing engineers in the field of mechanical resistance and stability. The active development of optimal design began in the mid-20th century with the development of computers. The first works were performed on proprietary software in the Fortran language. Over more than half a century, computers have been modernized into PCs, and software complexes such as Femap and Ansys have been created, which include sections on optimal design. For the optimal design of fairly unique structures, it is not enough to have a basic functional set in these calculation complexes, so for interesting target functions such as stability and weight, it is necessary to add this part to the optimization functionality. The object of study is thin-walled shells of minimal surfaces. The essence of these spatial structures lies in the uniqueness of their surface, which has been optimized using the parameter continuation method based on the defined contour and height of the future shell of the minimal surface. After integration, the optimal shape for the future structure is derived, which has a minimum area and minimum internal forces, which are compensated by the geometric shape of the thin-walled shell of the minimal surface. Optimal design in construction and applied mechanics is divided into four types. The first type is shape optimization. The second type is parametric optimization. The third type is topological optimization. The fourth type is optimization of physical and mechanical characteristics. To study multi-criteria parametric optimization of a minimum surface shell, taking into account geometric nonlinearity, a special additional optimizer module created by the authors is used, which is linked to the Femap with Nastran calculation complex [12]. This scientific article reveals the essence of four types of optimal design and an approach to the optimal design scheme. A numerical study of multi-criteria parametric optimization of the stability and weight of a minimal surface shell with a square plan consisting of two straight lines and two semicircles was performed. The thickness of the shell after optimization calculation ranges from 40 to 1 mm under thermo-mechanical loading. A graph of the target functions of weight and stability loss coefficient λ has been constructed. The weight on the target function graph decreased from 31 tons to 25.5 tons, which is 17.75% in percentage terms, while the stability loss coefficient decreased from 2.12 to 1.08, which means the maximum use of structural material in this optimization calculation.
- 30 October 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 115
Open AccessParametric optimization of the stability and weight of a minimal surface shell taking into account geometric nonlinearity under thermomechanical loading
Optimal design plays an important role in the approach to and formation of building structures. This stage of structural calculation has been little studied and is virtually unused by practicing engineers in the field of mechanical resistance and stability. The active development of optimal design began in the mid-20th century with the development of computers. The first works were performed on proprietary software in the Fortran language. Over more than half a century, computers have been modernized into PCs, and software complexes such as Femap and Ansys have been created, which include sections on optimal design. For the optimal design of fairly unique structures, it is not enough to have a basic functional set in these calculation complexes, so for interesting target functions such as stability and weight, it is necessary to add this part to the optimization functionality. The object of study is thin-walled shells of minimal surfaces. The essence of these spatial structures lies in the uniqueness of their surface, which has been optimized using the parameter continuation method based on the defined contour and height of the future shell of the minimal surface. After integration, the optimal shape for the future structure is derived, which has a minimum area and minimum internal forces, which are compensated by the geometric shape of the thin-walled shell of the minimal surface. Optimal design in construction and applied mechanics is divided into four types. The first type is shape optimization. The second type is parametric optimization. The third type is topological optimization. The fourth type is optimization of physical and mechanical characteristics. To study multi-criteria parametric optimization of a minimum surface shell, taking into account geometric nonlinearity, a special additional optimizer module created by the authors is used, which is linked to the Femap with Nastran calculation complex [12]. This scientific article reveals the essence of four types of optimal design and an approach to the optimal design scheme. A numerical study of multi-criteria parametric optimization of the stability and weight of a minimal surface shell with a square plan consisting of two straight lines and two semicircles was performed. The thickness of the shell after optimization calculation ranges from 40 to 1 mm under thermo-mechanical loading. A graph of the target functions of weight and stability loss coefficient λ has been constructed. The weight on the target function graph decreased from 31 tons to 25.5 tons, which is 17.75% in percentage terms, while the stability loss coefficient decreased from 2.12 to 1.08, which means the maximum use of structural material in this optimization calculation.
- Open Access
- 3 July 2025
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 108,p. 108-120
STABILITY OF A SHELL WITH A MINIMUM SURFACE ON A RECTANGULAR PLAN CONSISTING OF TWO STRAIGHT LINES AND TWO SEMI-CIRCLES UNDER THERMAL AND POWER LOADING, TAKING INTO ACCOUNT GEOMETRIC NONLINEARITY
The desire to obtain an optimal and economical structure leads to the creation of new shell structures on a given contour. In structural and applied mechanics, there is an effort to create structures with reduced weight using new numerical methods and techniques. The issue of stability of such thin-walled spatial structures is of great importance, and it is also important to determine the required thickness of the minimum surface shell on a rectangular contour after performing a numerical stability study taking into account geometric nonlinearity. The study of shells of minimal surfaces is considered taking into account deformation fields and high stress gradients; the numerical study of such shells is associated with great technical and mathematical difficulties. The application of classical shell theory for this type of problem leads to the solution of a system of high-order partial differential equations. The availability of modern computational and graphical complexes creates good conditions for solving such problems using numerical methods. Geometrically nonlinear problems are problems of elasticity theory in which nonlinearity in the dependence of strains and displacements is taken into account, while stresses and strains are related linearly. Taking into account nonlinear components of deformations is necessary for the calculation of flexible thin-walled structures. In the numerical study of stability, due to geometric nonlinearity, it was possible to reduce the shell thickness by 6% by taking into account the actual displacements at each step of the stability check. This numerical study makes it possible to further perform a multi-criteria parametric optimization study of the minimum surface shell with the target functions of weight and stability, with the limitation of the coefficient λ = 1.0. The method of mathematical optimization is presented in the form of the gradient descent method. This method makes it easy to find the extremes of the objective functions in multicriteria parametric optimization with regard to geometric nonlinearity. In the future, on the basis of this numerical study, it is possible to design this spatial thin-walled structure that can span large spans and be effective and economically feasible for construction projects. The effectiveness of the methodology for studying the stability of spatial thin-walled structures is confirmed by the research of other authors.
- 3 July 2025
- Published by Kyiv National University of Construction and Architecture in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
- No. 108,p. 108-120
Open AccessSTABILITY OF A SHELL WITH A MINIMUM SURFACE ON A RECTANGULAR PLAN CONSISTING OF TWO STRAIGHT LINES AND TWO SEMI-CIRCLES UNDER THERMAL AND POWER LOADING, TAKING INTO ACCOUNT GEOMETRIC NONLINEARITY
The desire to obtain an optimal and economical structure leads to the creation of new shell structures on a given contour. In structural and applied mechanics, there is an effort to create structures with reduced weight using new numerical methods and techniques. The issue of stability of such thin-walled spatial structures is of great importance, and it is also important to determine the required thickness of the minimum surface shell on a rectangular contour after performing a numerical stability study taking into account geometric nonlinearity. The study of shells of minimal surfaces is considered taking into account deformation fields and high stress gradients; the numerical study of such shells is associated with great technical and mathematical difficulties. The application of classical shell theory for this type of problem leads to the solution of a system of high-order partial differential equations. The availability of modern computational and graphical complexes creates good conditions for solving such problems using numerical methods. Geometrically nonlinear problems are problems of elasticity theory in which nonlinearity in the dependence of strains and displacements is taken into account, while stresses and strains are related linearly. Taking into account nonlinear components of deformations is necessary for the calculation of flexible thin-walled structures. In the numerical study of stability, due to geometric nonlinearity, it was possible to reduce the shell thickness by 6% by taking into account the actual displacements at each step of the stability check. This numerical study makes it possible to further perform a multi-criteria parametric optimization study of the minimum surface shell with the target functions of weight and stability, with the limitation of the coefficient λ = 1.0. The method of mathematical optimization is presented in the form of the gradient descent method. This method makes it easy to find the extremes of the objective functions in multicriteria parametric optimization with regard to geometric nonlinearity. In the future, on the basis of this numerical study, it is possible to design this spatial thin-walled structure that can span large spans and be effective and economically feasible for construction projects. The effectiveness of the methodology for studying the stability of spatial thin-walled structures is confirmed by the research of other authors.
- Open Access
- 25 April 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 114,p. 265-275
Multicriteria parametric optimization of the strength and weight of a shell of a minimum surface on a circular contour consisting of two inclined ellipses, taking into account geometric nonlinearity under thermal and power loading
In the modern design of building spatial structures of the thin shell type, a new method of multicriteria parametric optimization under thermal and power loading with consideration of geometric nonlinearity has been developed. This approach to the design of the structure can be coordinated with the method of calculation for two groups of limit states. The first group of limit states includes strength and stability. The second group of limit states includes deflections and, for reinforced concrete structures, crack resistance. External loads are taken into account in accordance with state building codes, which allow for safety factors to be taken into account with regulated safety factors for a combination of static thermal loads applied to finite elements. The calculation is performed using the finite element method in the Femap with Nastran calculation package. The optimization study is performed by connecting additional modules of our own software, which specify a pair of target Mises stress functions and the weight of the structure. The design variables are represented by the shell thickness of the minimum surface. The constraints are in the form of Mises stresses of 240 MPa, corresponding to the corresponding steel grade. This research paper considers the object of study - a shell of minimal surface on a circular contour consisting of two inclined ellipses. This type of spatial thin shells makes it possible to use several types of optimal design simultaneously. The first type of optimal design is the optimization of the shape of the minimum surface hull, which is performed using application programs. The second type of optimal design is parametric optimization, which makes it possible to use the optimal thickness of the minimum surface shell. This approach to the design of spatial thin shells makes it possible to use minimum weight while maximizing the strength characteristics of the structure. Numerical studies were carried out taking into account geometric nonlinearity. By taking into account the geometric nonlinearity, it was possible to take into account the actual stresses and displacements, which gave an additional optimization effect of 3% compared to the linear formulation. This approach to structural design makes it possible to use the optimization technique to calculate and design thin steel shells with minimal surfaces on real objects. This methodology has been verified by other authors.
- 25 April 2025
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 114,p. 265-275
Open AccessMulticriteria parametric optimization of the strength and weight of a shell of a minimum surface on a circular contour consisting of two inclined ellipses, taking into account geometric nonlinearity under thermal and power loading
In the modern design of building spatial structures of the thin shell type, a new method of multicriteria parametric optimization under thermal and power loading with consideration of geometric nonlinearity has been developed. This approach to the design of the structure can be coordinated with the method of calculation for two groups of limit states. The first group of limit states includes strength and stability. The second group of limit states includes deflections and, for reinforced concrete structures, crack resistance. External loads are taken into account in accordance with state building codes, which allow for safety factors to be taken into account with regulated safety factors for a combination of static thermal loads applied to finite elements. The calculation is performed using the finite element method in the Femap with Nastran calculation package. The optimization study is performed by connecting additional modules of our own software, which specify a pair of target Mises stress functions and the weight of the structure. The design variables are represented by the shell thickness of the minimum surface. The constraints are in the form of Mises stresses of 240 MPa, corresponding to the corresponding steel grade. This research paper considers the object of study - a shell of minimal surface on a circular contour consisting of two inclined ellipses. This type of spatial thin shells makes it possible to use several types of optimal design simultaneously. The first type of optimal design is the optimization of the shape of the minimum surface hull, which is performed using application programs. The second type of optimal design is parametric optimization, which makes it possible to use the optimal thickness of the minimum surface shell. This approach to the design of spatial thin shells makes it possible to use minimum weight while maximizing the strength characteristics of the structure. Numerical studies were carried out taking into account geometric nonlinearity. By taking into account the geometric nonlinearity, it was possible to take into account the actual stresses and displacements, which gave an additional optimization effect of 3% compared to the linear formulation. This approach to structural design makes it possible to use the optimization technique to calculate and design thin steel shells with minimal surfaces on real objects. This methodology has been verified by other authors.