Abstract
Optimal design of a structure is currently one of the most relevant sections in structural and applied mechanics. The theory of mathematical programming and the emergence of computers had a great influence on the optimal design of structures in the late 40s. This greatly expanded the range of structures and physical models that became available for optimal design. The use of analytical optimization methods leads to success only when considering the simplest structures. Therefore, numerical methods for finding optimal parameters, which are PC-oriented, have become widespread in optimal design. Designing is the most critical stage of creating a structure, during which technical characteristics are determined and the feasibility of the goal is checked. An integrated approach is required to take into account all requirements, and this is the main difficulty of optimal design. The process of creating an optimal structure is highly dependent on the optimization method, which plays a key role in the design of structures for various purposes. This scientific article considers an integrated approach to the optimal design of the forced frequencies of a shell of a minimal surface with a square plan consisting of two straight lines and two semicircles under thermal and power loading. The numerical study of the optimization calculation was carried out as follows: the objective function is the weight of the minimum surface shell, the design variables are the thickness of the minimum surface shell from 1 mm to 100 mm, and the constraint is represented as the first forced vibration frequency of 0.2 Hz. Based on the results of the numerical study, the weight of the minimum surface shell decreased by 11.2%, the first forced vibration frequency is 0.2 Hz, which meets the specified constraint. We can draw a general conclusion that the author's methodology and the use of his own software make it possible to perform an effective optimization calculation for shells of minimal surfaces, and the use of two types of optimization types on one research object is an important applied problem for civil and applied mechanics