Mykola Reutskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mykola Reutskyi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Mykhailo Kovalenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
6 shared publications - Iryna Kovalenko
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського», м. Київ
4 shared publications - Oleh Bazarov
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications M. Reutskyi
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
2 shared publications- Yehor Titov
Geko-Center LLC
2 shared publications Єгор Тітов
Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications
Latest Publications
- Open Access
- 30 June 2026
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 2(85),p. 17-33
РЕЖИМИ РОБОТИ ГІБРИДНОЇ АВТОНОМНОЇ ЕЛЕКТРОЕНЕРГЕТИЧНОЇ СИСТЕМИ З КОМБІНОВАНИМИ ДЖЕРЕЛАМИ ЕНЕРГІЇ
У роботі проведено аналіз режимів функціонування автономної гібридної системи енергозабезпечення, що базується на комбінованому використанні енергії вітру з синхронним генератором на постійних магнітах, дизель-генераторної установки та системи накопичення з акумуляторними батареями. Обґрунтовано актуальність впровадження таких систем для приватних домогосподарств з високим піковим навантаженням (до 20 кВт) в умовах відсутності централізованого електропостачання. Розроблено чисельну імітаційну модель, яка дає змогу оцінити динаміку розподілу потужностей між джерелами залежно від швидкості вітру та стану заряду акумуляторних батарей. Побудовано залежності розподілу потужності за різної швидкості вітру та різного рівня заряду акумуляторів. Показано, що, застосовуючи гібридний інвертор з MPPT у поєднанні з накопичувачами LiFePO4, можна мінімізувати час роботи паливного генератора, використовуючи його лише в разі досягнення критичного порогу розряду АКБ (менше 20 %). Встановлено, що робота ДГУ в режимі форсованого заряду акумуляторів на потужності 70–80 % від номінальної забезпечує значне зниження питомої витрати палива та подовження міжремонтного ресурсу двигуна. Впровадження вітрогенератора з інтелектуальним керуванням заряду дає змогу досягти економії паливно-мастильних матеріалів на рівні 45–65 % порівняно з традиційними схемами живлення. Запропонована модель може бути використана для проєктування високоефективних автономних систем енергозабезпечення.
- 30 June 2026
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 2(85),p. 17-33
Open AccessРЕЖИМИ РОБОТИ ГІБРИДНОЇ АВТОНОМНОЇ ЕЛЕКТРОЕНЕРГЕТИЧНОЇ СИСТЕМИ З КОМБІНОВАНИМИ ДЖЕРЕЛАМИ ЕНЕРГІЇ
У роботі проведено аналіз режимів функціонування автономної гібридної системи енергозабезпечення, що базується на комбінованому використанні енергії вітру з синхронним генератором на постійних магнітах, дизель-генераторної установки та системи накопичення з акумуляторними батареями. Обґрунтовано актуальність впровадження таких систем для приватних домогосподарств з високим піковим навантаженням (до 20 кВт) в умовах відсутності централізованого електропостачання. Розроблено чисельну імітаційну модель, яка дає змогу оцінити динаміку розподілу потужностей між джерелами залежно від швидкості вітру та стану заряду акумуляторних батарей. Побудовано залежності розподілу потужності за різної швидкості вітру та різного рівня заряду акумуляторів. Показано, що, застосовуючи гібридний інвертор з MPPT у поєднанні з накопичувачами LiFePO4, можна мінімізувати час роботи паливного генератора, використовуючи його лише в разі досягнення критичного порогу розряду АКБ (менше 20 %). Встановлено, що робота ДГУ в режимі форсованого заряду акумуляторів на потужності 70–80 % від номінальної забезпечує значне зниження питомої витрати палива та подовження міжремонтного ресурсу двигуна. Впровадження вітрогенератора з інтелектуальним керуванням заряду дає змогу досягти економії паливно-мастильних матеріалів на рівні 45–65 % порівняно з традиційними схемами живлення. Запропонована модель може бути використана для проєктування високоефективних автономних систем енергозабезпечення.
- Open Access
- 28 September 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 3(82),p. 19-26
PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
Two original designs of permanent-magnet limited-angle torque motors (LATMs) are presented. Development trends for 2014–2024 are summarized, including new topologies, numerical-simulation methods, and application areas. The study highlights LATM capabilities in solar, wind, and bio-energy systems that require high direct torque within a small angular span. The advantages of the proposed motors – with solid and split magnetic cores – as compared to existing counterparts are described. Finite-element mathematical models have been developed and “torque-versus-angle” characteristics analyzed. The upgraded design delivers an almost constant torque over a wide angular range. The findings confirm the promise of LATMs for improving the reliability and efficiency of electromechanical drives in renewable-energy installations.
- 28 September 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 3(82),p. 19-26
Open AccessPROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
Two original designs of permanent-magnet limited-angle torque motors (LATMs) are presented. Development trends for 2014–2024 are summarized, including new topologies, numerical-simulation methods, and application areas. The study highlights LATM capabilities in solar, wind, and bio-energy systems that require high direct torque within a small angular span. The advantages of the proposed motors – with solid and split magnetic cores – as compared to existing counterparts are described. Finite-element mathematical models have been developed and “torque-versus-angle” characteristics analyzed. The upgraded design delivers an almost constant torque over a wide angular range. The findings confirm the promise of LATMs for improving the reliability and efficiency of electromechanical drives in renewable-energy installations.
- Open Access
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 50-55
Linearized dynamic model of magnetic transmission
The work is devoted to the development of a linearized numerical mathematical model of a contactless electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, contactless transmission of mechanical power, no maintenance costs, simplicity of design. The use of magnetic transmissions for systems for converting low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, mechanical vibration energy, etc. The use of magnetic transmissions in autonomous wind power plants may be more promising from an economic and technical point of view compared to traditional mechanical transmissions. As an alternative to the dynamic model, which is inconvenient to use at the initial stages of design, for the purpose of initial assessment of oscillation parameters, a linearized dynamic model of magnetic transmission has been developed, in which the relationship between the moment and the load angle is represented by a non-sinusoidal function, and its linear approximation in the operating torque domain. Using the developed model, the parameters and characteristics of not only the magnetic transmission, but also other components of the system have been investigated: an electric source of electric energy, a wind turbine, load, etc., which increases the variability and opportunities for conducting scientific research of an exploratory nature. The developed simulation model of magnetic transmission takes into account the pulsations of the electromagnetic moment through the discrete structure of the magnetic transmission and the change in the model parameters when the input torque changes: pulsations, losses in the magnetic core and permanent magnets, a change in the load angle and the transmitted electromagnetic moment.
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 50-55
Open AccessLinearized dynamic model of magnetic transmission
The work is devoted to the development of a linearized numerical mathematical model of a contactless electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, contactless transmission of mechanical power, no maintenance costs, simplicity of design. The use of magnetic transmissions for systems for converting low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, mechanical vibration energy, etc. The use of magnetic transmissions in autonomous wind power plants may be more promising from an economic and technical point of view compared to traditional mechanical transmissions. As an alternative to the dynamic model, which is inconvenient to use at the initial stages of design, for the purpose of initial assessment of oscillation parameters, a linearized dynamic model of magnetic transmission has been developed, in which the relationship between the moment and the load angle is represented by a non-sinusoidal function, and its linear approximation in the operating torque domain. Using the developed model, the parameters and characteristics of not only the magnetic transmission, but also other components of the system have been investigated: an electric source of electric energy, a wind turbine, load, etc., which increases the variability and opportunities for conducting scientific research of an exploratory nature. The developed simulation model of magnetic transmission takes into account the pulsations of the electromagnetic moment through the discrete structure of the magnetic transmission and the change in the model parameters when the input torque changes: pulsations, losses in the magnetic core and permanent magnets, a change in the load angle and the transmitted electromagnetic moment.
- Open Access
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 44-49
Experimental study of autonomous magnetic transmission
The work is devoted to the experimental study of a non-contact electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, non-contact transmission of mechanical power, no maintenance costs, and simplicity of design. The use of magnetic transmissions for systems of conversion of low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, energy of mechanical vibrations, etc. The application of magnetic transmissions in autonomous wind power plants can be more promising from the economic and technical point of view compared to traditional mechanical transmissions. In order to conduct experimental studies, at the first stage of this study, a geometric model of magnetic transmission was developed in the automated design system. With the use of detailed drawings, the main structural elements of the magnetic transmission were printed using three-dimensional printing technologies. Magnetic segments of the magnetic transmission modulator, permanent magnets, shaft, bearings and bearing shields were installed. On the basis of the developed mock-up sample of the magnetic transmission, an experimental stand for the study of magnetic transmission was developed, with the help of which a number of experimental studies were carried out: measurement of rotation speed and gear ratio, losses, heating and electromagnetic moment. The conducted studies and the developed electromechanical stand allow conducting various studies of magnetic transmissions, which will allow to confirm the results of mathematical modeling and to confirm or refute the results of scientific studies.
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 44-49
Open AccessExperimental study of autonomous magnetic transmission
The work is devoted to the experimental study of a non-contact electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, non-contact transmission of mechanical power, no maintenance costs, and simplicity of design. The use of magnetic transmissions for systems of conversion of low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, energy of mechanical vibrations, etc. The application of magnetic transmissions in autonomous wind power plants can be more promising from the economic and technical point of view compared to traditional mechanical transmissions. In order to conduct experimental studies, at the first stage of this study, a geometric model of magnetic transmission was developed in the automated design system. With the use of detailed drawings, the main structural elements of the magnetic transmission were printed using three-dimensional printing technologies. Magnetic segments of the magnetic transmission modulator, permanent magnets, shaft, bearings and bearing shields were installed. On the basis of the developed mock-up sample of the magnetic transmission, an experimental stand for the study of magnetic transmission was developed, with the help of which a number of experimental studies were carried out: measurement of rotation speed and gear ratio, losses, heating and electromagnetic moment. The conducted studies and the developed electromechanical stand allow conducting various studies of magnetic transmissions, which will allow to confirm the results of mathematical modeling and to confirm or refute the results of scientific studies.
- Open Access
- 31 March 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 1(80),p. 29-37
ВИКОРИСТАННЯ ДЖЕРЕЛА БЕЗПЕРЕБІЙНОГО ЖИВЛЕННЯ ДЛЯ ЗНИЖЕННЯ ЕКСПЛУАТАЦІЙНИХ ВИТРАТ АВТОНОМНОГО ЕЛЕКТРОГЕНЕРАТОРА
Проведено аналіз використання джерела безперебійного живлення сумісно з автономним дизель-бензиновим електрогенератором з метою зниження експлуатаційних витрат. Такі системи мають місце при використанні автономної електрогенерувальної установки як єдиного джерела живлення споживачів, або в разі аварійних чи екстрених відключень електроенергії. Проведено аналіз існуючих систем автономного енергозабезпечення та обґрунтовано актуальність цього напряму дослідження. На конкретному прикладі автономної електроустановки та певного переліку обладнання приватного будинку побудовано графіки навантажень залежно від часу доби. За розробленими алгоритмами проведено оцінку ефективності використання ДБЖ у парі з автономною дизель-бензиновою електрогенерувальною установкою. Використання ДБЖ дає змогу знизити експлуатаційні витрати за рахунок навантаження генератора до оптимального значення 75–80 % номінального, економити паливо, скоротити інтервали й періодичність технічного обслуговування та зменшити шкідливі викиди в атмосферу. Максимальна величина заощаджень залежно від режиму роботи системи, характеру навантаження й періодичності відключень становить від 39 до 76 %. Збільшити ефект енергозбереження можливо, якщо цю систему додатково спорядити сонячними панелями чи вітрогенератором. Це дозволить додатково заощаджувати паливо та ресурс роботи електрогенератора. Оцінку ефективності цього технічного рішення планується провести під час майбутніх досліджень.
- 31 March 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 1(80),p. 29-37
Open AccessВИКОРИСТАННЯ ДЖЕРЕЛА БЕЗПЕРЕБІЙНОГО ЖИВЛЕННЯ ДЛЯ ЗНИЖЕННЯ ЕКСПЛУАТАЦІЙНИХ ВИТРАТ АВТОНОМНОГО ЕЛЕКТРОГЕНЕРАТОРА
Проведено аналіз використання джерела безперебійного живлення сумісно з автономним дизель-бензиновим електрогенератором з метою зниження експлуатаційних витрат. Такі системи мають місце при використанні автономної електрогенерувальної установки як єдиного джерела живлення споживачів, або в разі аварійних чи екстрених відключень електроенергії. Проведено аналіз існуючих систем автономного енергозабезпечення та обґрунтовано актуальність цього напряму дослідження. На конкретному прикладі автономної електроустановки та певного переліку обладнання приватного будинку побудовано графіки навантажень залежно від часу доби. За розробленими алгоритмами проведено оцінку ефективності використання ДБЖ у парі з автономною дизель-бензиновою електрогенерувальною установкою. Використання ДБЖ дає змогу знизити експлуатаційні витрати за рахунок навантаження генератора до оптимального значення 75–80 % номінального, економити паливо, скоротити інтервали й періодичність технічного обслуговування та зменшити шкідливі викиди в атмосферу. Максимальна величина заощаджень залежно від режиму роботи системи, характеру навантаження й періодичності відключень становить від 39 до 76 %. Збільшити ефект енергозбереження можливо, якщо цю систему додатково спорядити сонячними панелями чи вітрогенератором. Це дозволить додатково заощаджувати паливо та ресурс роботи електрогенератора. Оцінку ефективності цього технічного рішення планується провести під час майбутніх досліджень.
- Open Access
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (128)) , 22-32
Construction of the mathematical model of magnetic transmission for an autonomous wind power plant
The object of research is electromagnetic and mechanical processes in magnetic transmission for an autonomous wind power plant of small power. The use of magnetic transmission as part of an autonomous wind power plant makes it possible to improve the reliability and efficiency of such a system. In the current work, a study of magnetic transmission as part of an autonomous wind power plant was carried out to investigate the parameters and characteristics of magnetic transmission. This paper reports the construction of a numerical simulation mathematical model of a magnetic reducer operating as part of an autonomous wind power plant with a permanent magnet generator. The model takes into account discrete structure of internal and external rotors and modulator; changes in model parameters when input parameters change. It also takes into account losses, change of load angle and electromagnetic moment; the effect of changing the generator load. The built model of the magnetic reducer system differs in that the change in the generator load leads to a shift of the operating point on the mechanical characteristics of the rotor of the wind power plant (WPP). The model also works in the opposite direction: changes in wind parameters affect power, voltage, current, and electromagnetic moment. With the help of the model built, the parameters and characteristics of not only the magnetic reducer but also other components of the system were investigated. The efficiency at the output of the electric generator was determined, which is ≈75 % at a load of 2.0 kW. The magnetic transmission moment at a wind speed of 7.8 m/s for the high-speed rotor is 0.91 N∙m, and the low-speed rotor is 7.8 N∙m, which corresponds to a transmission ratio of 8.6. This expands opportunities for exploratory research Об'єктом дослідження є електромагнітні та механічні процеси в магнітній передачі для автономної вітроелектричної установки малої потужності. Використання магнітної передачі у складі автономної вітроелектричної установки дозволяє підвищити надійність та ефективність роботи такої системи. В роботі проведено дослідження магнітопередачі в складі автономної вітроелектричної установки для дослідження параметрів та характеристик магнітної передачі. У роботі розроблено чисельну імітаційну математичну модель магнітного редуктора, що працює у складі автономної вітроелектростанції з генератором на постійних магнітах. Модель враховує: дискретну структуру внутрішнього, зовнішнього роторів і модулятора; зміни параметрів моделі при зміні вхідних параметрів. Вона також враховує: втрати, зміну кута навантаження та електромагнітного моменту; вплив зміни навантаження генератора. Розроблена модель системи магнітного редуктора відрізняється тим, що зміна навантаження електрогенератора призводить до переміщення робочої точки на механічній характеристиці ротора вітроелектричної установки (ВЕУ). Модель працює і в протилежному напрямку: зміни параметрів вітру впливають на потужність, напругу, струм і електромагнітний момент. За допомогою розробленої моделі досліджуються параметри і характеристики не тільки магнітного редуктора, але й інших компонентів системи. Визначено ККД на виході електрогенератора, яке при навантаженні 2,0 кВт становить ≈75 %. Момент магнітної передачі при швидкості вітру 7,8 м/с для високошвидкісного ротора становить – 0,91 Н∙м, а тихохідного – 7,8 Н∙м, що відповідає передавальному відношенню 8,6. Це розширює можливості для проведення пошукових досліджень
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (128)) , 22-32
Open AccessConstruction of the mathematical model of magnetic transmission for an autonomous wind power plant
The object of research is electromagnetic and mechanical processes in magnetic transmission for an autonomous wind power plant of small power. The use of magnetic transmission as part of an autonomous wind power plant makes it possible to improve the reliability and efficiency of such a system. In the current work, a study of magnetic transmission as part of an autonomous wind power plant was carried out to investigate the parameters and characteristics of magnetic transmission. This paper reports the construction of a numerical simulation mathematical model of a magnetic reducer operating as part of an autonomous wind power plant with a permanent magnet generator. The model takes into account discrete structure of internal and external rotors and modulator; changes in model parameters when input parameters change. It also takes into account losses, change of load angle and electromagnetic moment; the effect of changing the generator load. The built model of the magnetic reducer system differs in that the change in the generator load leads to a shift of the operating point on the mechanical characteristics of the rotor of the wind power plant (WPP). The model also works in the opposite direction: changes in wind parameters affect power, voltage, current, and electromagnetic moment. With the help of the model built, the parameters and characteristics of not only the magnetic reducer but also other components of the system were investigated. The efficiency at the output of the electric generator was determined, which is ≈75 % at a load of 2.0 kW. The magnetic transmission moment at a wind speed of 7.8 m/s for the high-speed rotor is 0.91 N∙m, and the low-speed rotor is 7.8 N∙m, which corresponds to a transmission ratio of 8.6. This expands opportunities for exploratory research Об'єктом дослідження є електромагнітні та механічні процеси в магнітній передачі для автономної вітроелектричної установки малої потужності. Використання магнітної передачі у складі автономної вітроелектричної установки дозволяє підвищити надійність та ефективність роботи такої системи. В роботі проведено дослідження магнітопередачі в складі автономної вітроелектричної установки для дослідження параметрів та характеристик магнітної передачі. У роботі розроблено чисельну імітаційну математичну модель магнітного редуктора, що працює у складі автономної вітроелектростанції з генератором на постійних магнітах. Модель враховує: дискретну структуру внутрішнього, зовнішнього роторів і модулятора; зміни параметрів моделі при зміні вхідних параметрів. Вона також враховує: втрати, зміну кута навантаження та електромагнітного моменту; вплив зміни навантаження генератора. Розроблена модель системи магнітного редуктора відрізняється тим, що зміна навантаження електрогенератора призводить до переміщення робочої точки на механічній характеристиці ротора вітроелектричної установки (ВЕУ). Модель працює і в протилежному напрямку: зміни параметрів вітру впливають на потужність, напругу, струм і електромагнітний момент. За допомогою розробленої моделі досліджуються параметри і характеристики не тільки магнітного редуктора, але й інших компонентів системи. Визначено ККД на виході електрогенератора, яке при навантаженні 2,0 кВт становить ≈75 %. Момент магнітної передачі при швидкості вітру 7,8 м/с для високошвидкісного ротора становить – 0,91 Н∙м, а тихохідного – 7,8 Н∙м, що відповідає передавальному відношенню 8,6. Це розширює можливості для проведення пошукових досліджень
- Open Access
- 17 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
DIODE EXCITERS OF A BRUSHLESS MEDIUM POWER SYNCHRONOUS GENERATOR
The aim of the work is a comparative analysis of the parameters of the diode exciter of a brushless synchronous generator of medium power on the number of pole pairs of an auxiliary electric machine, the development of recommendations for choosing the number of pole pairs of an auxiliary electric machine and the design of the exciter. An improvement of the automated method of electromagnetic calculation of the exciter of a brushless synchronous machine has been carried out. The diode exciters of a brushless synchronous generator with a power of 250 kW with the number of pole pairs p = 2 based on a three-phase bridge rectifier and an auxiliary electric machine of a synchronous type with different numbers of pole pairs are compared. At the first stage, a preliminary electromagnetic calculation of the auxiliary electric machine is performed, taking into account the initial value of the relative magnitude of the resulting electromotive force, the allowable values of inductions in all sections of the magnetic circuit in in forced mode, the length of the magnetic circuit and the rotor winding support are determined. According to the results of the calculation of the rectifier model in the quasi-steel mode of operation, the relative value of the resulting electromotive force of the auxiliary electric machine is specified. At the first stage, a preliminary electromagnetic calculation of the auxiliary electric machine is performed, taking into account the initial value of the relative magnitude of the resulting electromotive force, the allowable values of inductions in all sections of the magnetic circuit in in forced mode, the length of the magnetic circuit and the rotor winding support are determined. According to the results of the calculation of the rectifier model in the quasi-steel mode of operation, the relative value of the resulting electromotive force of the auxiliary electric machine is specified pB = 4.
- 17 April 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
Open AccessDIODE EXCITERS OF A BRUSHLESS MEDIUM POWER SYNCHRONOUS GENERATOR
The aim of the work is a comparative analysis of the parameters of the diode exciter of a brushless synchronous generator of medium power on the number of pole pairs of an auxiliary electric machine, the development of recommendations for choosing the number of pole pairs of an auxiliary electric machine and the design of the exciter. An improvement of the automated method of electromagnetic calculation of the exciter of a brushless synchronous machine has been carried out. The diode exciters of a brushless synchronous generator with a power of 250 kW with the number of pole pairs p = 2 based on a three-phase bridge rectifier and an auxiliary electric machine of a synchronous type with different numbers of pole pairs are compared. At the first stage, a preliminary electromagnetic calculation of the auxiliary electric machine is performed, taking into account the initial value of the relative magnitude of the resulting electromotive force, the allowable values of inductions in all sections of the magnetic circuit in in forced mode, the length of the magnetic circuit and the rotor winding support are determined. According to the results of the calculation of the rectifier model in the quasi-steel mode of operation, the relative value of the resulting electromotive force of the auxiliary electric machine is specified. At the first stage, a preliminary electromagnetic calculation of the auxiliary electric machine is performed, taking into account the initial value of the relative magnitude of the resulting electromotive force, the allowable values of inductions in all sections of the magnetic circuit in in forced mode, the length of the magnetic circuit and the rotor winding support are determined. According to the results of the calculation of the rectifier model in the quasi-steel mode of operation, the relative value of the resulting electromotive force of the auxiliary electric machine is specified pB = 4.
- Open Access
- 17 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
SELECTION AND CALCULATION OF STEPPER MOTORS FOR CNC
Today, modern technologies tend to develop rapidly. The application of advanced inventions, principles, systems and approaches allows to simplify the production process, reduce the cost of manufacturing finished products, replace monotonous manual work with automated systems and devices. The basis of the power drive of such systems are electric motors: with permanent magnets, direct current, stepper, etc. When developing any electromechanical system, the task of choosing the type of drive motor, its parameters and characteristics. This article is devoted to the choice of such an electric motor for an electromechanical system for three-dimensional plastic printing. As a result of comparative analysis of parameters and characteristics of different types of motors, it is established that bipolar stepper motors are optimal for use in low-power and small-sized systems for three-dimensional printing. This is due to the simplicity of their design, reliability and low requirements for nominal and maximum torque.
- 17 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
Open AccessSELECTION AND CALCULATION OF STEPPER MOTORS FOR CNC
Today, modern technologies tend to develop rapidly. The application of advanced inventions, principles, systems and approaches allows to simplify the production process, reduce the cost of manufacturing finished products, replace monotonous manual work with automated systems and devices. The basis of the power drive of such systems are electric motors: with permanent magnets, direct current, stepper, etc. When developing any electromechanical system, the task of choosing the type of drive motor, its parameters and characteristics. This article is devoted to the choice of such an electric motor for an electromechanical system for three-dimensional plastic printing. As a result of comparative analysis of parameters and characteristics of different types of motors, it is established that bipolar stepper motors are optimal for use in low-power and small-sized systems for three-dimensional printing. This is due to the simplicity of their design, reliability and low requirements for nominal and maximum torque.