Yehor Titov
Yehor Titov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Mykhailo Kovalenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
6 shared publications - Iryna Kovalenko
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського», м. Київ
5 shared publications - Oleh Bazarov
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
4 shared publications - Ihor Tkachuk
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications - Mykola Reutskyi
NTUU ”Igor Sikorsky Kyiv Polytech-nic Institute“, Kyiv, Ukraine,Leading Researcher, Department No. 1 of Integrated Energy Systems, Institute of Re-newable Energy, NAS of Ukraine, Kyiv, Ukraine
2 shared publications - Oleg Kryshnov
Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications
Latest Publications
- Open Access
- 23 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (5 (138)) , 6-15
Determining the influence of structural and electromagnetic parameters on active losses in an electric motor with permanent magnets for unmanned aerial vehicles
This study investigates a small-sized high-speed permanent magnet motor used in the drive of unmanned aerial vehicles. As part of this study, a numerical simulation field mathematical model of a high-speed permanent magnet motor has been built, implemented by the finite element method. That made it possible to obtain the distribution of the electromagnetic field and forces, to estimate the total losses in all conductive and magnetically conductive media in individual structural elements of the permanent magnet motor under study. Unlike existing ones, the model built enables deriving the total losses in the calculation area; in permanent magnets, structural conductive elements, the armature winding, and in the magnetic core with hysteresis losses, eddy currents and additional losses caused by higher harmonics. The task addressed is predetermined by the pressing scientific-practical issue related to increasing the energy efficiency of a high-speed permanent magnet motor used for electric transport systems and unmanned aerial vehicles. The use of a simplified, more technological rectangular shape of permanent magnets has been proposed. Applying permanent magnets of this configuration makes it possible to reduce the total losses in the motor by 23…41% depending on the type of power supply – sinusoidal or when powered by an inverter with PWM. The use of a more technological form of permanent magnets leads to a decrease in the electromagnetic torque of the motor by approximately 18…30%, which is attributed to a decrease in the volume of active materials and an increase in the value of the equivalent air gap. At the same time, applying a modified form of permanent magnets makes it possible to reduce pulsations of the electromagnetic torque by 12%
- 23 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (5 (138)) , 6-15
Open AccessDetermining the influence of structural and electromagnetic parameters on active losses in an electric motor with permanent magnets for unmanned aerial vehicles
This study investigates a small-sized high-speed permanent magnet motor used in the drive of unmanned aerial vehicles. As part of this study, a numerical simulation field mathematical model of a high-speed permanent magnet motor has been built, implemented by the finite element method. That made it possible to obtain the distribution of the electromagnetic field and forces, to estimate the total losses in all conductive and magnetically conductive media in individual structural elements of the permanent magnet motor under study. Unlike existing ones, the model built enables deriving the total losses in the calculation area; in permanent magnets, structural conductive elements, the armature winding, and in the magnetic core with hysteresis losses, eddy currents and additional losses caused by higher harmonics. The task addressed is predetermined by the pressing scientific-practical issue related to increasing the energy efficiency of a high-speed permanent magnet motor used for electric transport systems and unmanned aerial vehicles. The use of a simplified, more technological rectangular shape of permanent magnets has been proposed. Applying permanent magnets of this configuration makes it possible to reduce the total losses in the motor by 23…41% depending on the type of power supply – sinusoidal or when powered by an inverter with PWM. The use of a more technological form of permanent magnets leads to a decrease in the electromagnetic torque of the motor by approximately 18…30%, which is attributed to a decrease in the volume of active materials and an increase in the value of the equivalent air gap. At the same time, applying a modified form of permanent magnets makes it possible to reduce pulsations of the electromagnetic torque by 12%
- Open Access
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 50-55
Linearized dynamic model of magnetic transmission
The work is devoted to the development of a linearized numerical mathematical model of a contactless electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, contactless transmission of mechanical power, no maintenance costs, simplicity of design. The use of magnetic transmissions for systems for converting low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, mechanical vibration energy, etc. The use of magnetic transmissions in autonomous wind power plants may be more promising from an economic and technical point of view compared to traditional mechanical transmissions. As an alternative to the dynamic model, which is inconvenient to use at the initial stages of design, for the purpose of initial assessment of oscillation parameters, a linearized dynamic model of magnetic transmission has been developed, in which the relationship between the moment and the load angle is represented by a non-sinusoidal function, and its linear approximation in the operating torque domain. Using the developed model, the parameters and characteristics of not only the magnetic transmission, but also other components of the system have been investigated: an electric source of electric energy, a wind turbine, load, etc., which increases the variability and opportunities for conducting scientific research of an exploratory nature. The developed simulation model of magnetic transmission takes into account the pulsations of the electromagnetic moment through the discrete structure of the magnetic transmission and the change in the model parameters when the input torque changes: pulsations, losses in the magnetic core and permanent magnets, a change in the load angle and the transmitted electromagnetic moment.
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 50-55
Open AccessLinearized dynamic model of magnetic transmission
The work is devoted to the development of a linearized numerical mathematical model of a contactless electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, contactless transmission of mechanical power, no maintenance costs, simplicity of design. The use of magnetic transmissions for systems for converting low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, mechanical vibration energy, etc. The use of magnetic transmissions in autonomous wind power plants may be more promising from an economic and technical point of view compared to traditional mechanical transmissions. As an alternative to the dynamic model, which is inconvenient to use at the initial stages of design, for the purpose of initial assessment of oscillation parameters, a linearized dynamic model of magnetic transmission has been developed, in which the relationship between the moment and the load angle is represented by a non-sinusoidal function, and its linear approximation in the operating torque domain. Using the developed model, the parameters and characteristics of not only the magnetic transmission, but also other components of the system have been investigated: an electric source of electric energy, a wind turbine, load, etc., which increases the variability and opportunities for conducting scientific research of an exploratory nature. The developed simulation model of magnetic transmission takes into account the pulsations of the electromagnetic moment through the discrete structure of the magnetic transmission and the change in the model parameters when the input torque changes: pulsations, losses in the magnetic core and permanent magnets, a change in the load angle and the transmitted electromagnetic moment.
- Open Access
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 44-49
Experimental study of autonomous magnetic transmission
The work is devoted to the experimental study of a non-contact electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, non-contact transmission of mechanical power, no maintenance costs, and simplicity of design. The use of magnetic transmissions for systems of conversion of low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, energy of mechanical vibrations, etc. The application of magnetic transmissions in autonomous wind power plants can be more promising from the economic and technical point of view compared to traditional mechanical transmissions. In order to conduct experimental studies, at the first stage of this study, a geometric model of magnetic transmission was developed in the automated design system. With the use of detailed drawings, the main structural elements of the magnetic transmission were printed using three-dimensional printing technologies. Magnetic segments of the magnetic transmission modulator, permanent magnets, shaft, bearings and bearing shields were installed. On the basis of the developed mock-up sample of the magnetic transmission, an experimental stand for the study of magnetic transmission was developed, with the help of which a number of experimental studies were carried out: measurement of rotation speed and gear ratio, losses, heating and electromagnetic moment. The conducted studies and the developed electromechanical stand allow conducting various studies of magnetic transmissions, which will allow to confirm the results of mathematical modeling and to confirm or refute the results of scientific studies.
- 26 June 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (13),p. 44-49
Open AccessExperimental study of autonomous magnetic transmission
The work is devoted to the experimental study of a non-contact electromechanical energy converter with permanent magnets - magnetic transmission. Magnetic transmissions have certain design advantages compared to mechanical transmissions, namely: high reliability, efficiency, lower losses, non-contact transmission of mechanical power, no maintenance costs, and simplicity of design. The use of magnetic transmissions for systems of conversion of low-potential mechanical energy into electrical energy is especially relevant: wind energy, water energy, energy of mechanical vibrations, etc. The application of magnetic transmissions in autonomous wind power plants can be more promising from the economic and technical point of view compared to traditional mechanical transmissions. In order to conduct experimental studies, at the first stage of this study, a geometric model of magnetic transmission was developed in the automated design system. With the use of detailed drawings, the main structural elements of the magnetic transmission were printed using three-dimensional printing technologies. Magnetic segments of the magnetic transmission modulator, permanent magnets, shaft, bearings and bearing shields were installed. On the basis of the developed mock-up sample of the magnetic transmission, an experimental stand for the study of magnetic transmission was developed, with the help of which a number of experimental studies were carried out: measurement of rotation speed and gear ratio, losses, heating and electromagnetic moment. The conducted studies and the developed electromechanical stand allow conducting various studies of magnetic transmissions, which will allow to confirm the results of mathematical modeling and to confirm or refute the results of scientific studies.
- Open Access
- 30 April 2025
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 1,p. 7-16
Operation of autonomous electromechanical converters of low and medium power
Purpose. To assess the reliability of operation of low and medium power electromechanical converters based on real experience in operating such systems. Methodology. Statistical analysis methods, classical calculation methods for synchronous salient pole generators with electromagnetic excitation. Findings. An analysis of failure statistics of autonomous electromechanical converters of small and medium power was carried out. The results obtained emphasize the need to implement generator condition monitoring systems for early detection of malfunctions. Regular diagnostics and load control will help prevent critical breakdowns and increase the service life of the equipment. The collected statistical data can be used to develop effective preventive measures, improve maintenance instructions and optimize generator operating modes. Further research can be aimed at developing algorithms for automatic load distribution between phases, improving protection systems and increasing the reliability of insulating materials. An analysis of the failure statistics of diesel and gasoline generators showed that electrical breakdowns account for 51% of cases, and mechanical ones - 49%. This indicates an approximately even distribution between the two categories of failures, which indicates the need for a comprehensive approach to maintenance and diagnostics. When using these installations for military purposes, the balance of failures shifts: mechanical failures: 75-85%, electrical failures: 15-25%. Among electrical failures, the most common are damage to the stator windings due to load asymmetry, failure of voltage regulators, malfunctions of the battery system and violations of the insulation of the electrical wiring. Mechanical failures are most often associated with wear of the piston group, insufficient lubrication, engine overheating due to malfunctions of the cooling system and malfunctions in the fuel system. Originality. A detailed generalization of the experience of operating autonomous electromechanical converters in real conditions was carried out, which allowed us to establish the regularities of their operation, identify typical problems and develop recommendations for their elimination. The methods for assessing the efficiency of autonomous electromechanical converters proposed in the study can be used for further modernization of existing systems, as well as for creating new highly efficient autonomous power generating units. Practical value. The results of the study have practical value for engineers, users and manufacturers of electromechanical equipment. The results obtained can be used to improve the efficiency and reliability of autonomous power systems operating in various conditions. In particular, it is possible to reduce maintenance costs, improve energy efficiency and extend the service life of the equipment. The results obtained can be used in the development of recommendations for the selection, modernization and diagnostics of autonomous electromechanical installations.
- 30 April 2025
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 1,p. 7-16
Open AccessOperation of autonomous electromechanical converters of low and medium power
Purpose. To assess the reliability of operation of low and medium power electromechanical converters based on real experience in operating such systems. Methodology. Statistical analysis methods, classical calculation methods for synchronous salient pole generators with electromagnetic excitation. Findings. An analysis of failure statistics of autonomous electromechanical converters of small and medium power was carried out. The results obtained emphasize the need to implement generator condition monitoring systems for early detection of malfunctions. Regular diagnostics and load control will help prevent critical breakdowns and increase the service life of the equipment. The collected statistical data can be used to develop effective preventive measures, improve maintenance instructions and optimize generator operating modes. Further research can be aimed at developing algorithms for automatic load distribution between phases, improving protection systems and increasing the reliability of insulating materials. An analysis of the failure statistics of diesel and gasoline generators showed that electrical breakdowns account for 51% of cases, and mechanical ones - 49%. This indicates an approximately even distribution between the two categories of failures, which indicates the need for a comprehensive approach to maintenance and diagnostics. When using these installations for military purposes, the balance of failures shifts: mechanical failures: 75-85%, electrical failures: 15-25%. Among electrical failures, the most common are damage to the stator windings due to load asymmetry, failure of voltage regulators, malfunctions of the battery system and violations of the insulation of the electrical wiring. Mechanical failures are most often associated with wear of the piston group, insufficient lubrication, engine overheating due to malfunctions of the cooling system and malfunctions in the fuel system. Originality. A detailed generalization of the experience of operating autonomous electromechanical converters in real conditions was carried out, which allowed us to establish the regularities of their operation, identify typical problems and develop recommendations for their elimination. The methods for assessing the efficiency of autonomous electromechanical converters proposed in the study can be used for further modernization of existing systems, as well as for creating new highly efficient autonomous power generating units. Practical value. The results of the study have practical value for engineers, users and manufacturers of electromechanical equipment. The results obtained can be used to improve the efficiency and reliability of autonomous power systems operating in various conditions. In particular, it is possible to reduce maintenance costs, improve energy efficiency and extend the service life of the equipment. The results obtained can be used in the development of recommendations for the selection, modernization and diagnostics of autonomous electromechanical installations.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 41-45
Increasing efficiency of induction motor
In this work was analyzed induction motor, its advantages and disadvantages, and methods of modify it in way increasing its reliability and power coefficient. Power coefficient is the parameter which shows how much energy is used for yield and which just converting into heat. For analysis used calculation of induction motor which commonly used for developing serial asynchronous motor. Based on that calculation has modulated physical process which conducting in active parts of motor. For calculation of induction in armature and magnetic flux passes in it was used numerical mathematical model. This type of electric motors is common used so increase its efficiency and power characteristics is the one of way to reduce energy consuming. The developed way of modernization of induction motors, and analyzed reliability of it.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 41-45
Increasing efficiency of induction motor
In this work was analyzed induction motor, its advantages and disadvantages, and methods of modify it in way increasing its reliability and power coefficient. Power coefficient is the parameter which shows how much energy is used for yield and which just converting into heat. For analysis used calculation of induction motor which commonly used for developing serial asynchronous motor. Based on that calculation has modulated physical process which conducting in active parts of motor. For calculation of induction in armature and magnetic flux passes in it was used numerical mathematical model. This type of electric motors is common used so increase its efficiency and power characteristics is the one of way to reduce energy consuming. The developed way of modernization of induction motors, and analyzed reliability of it.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 35-40
Overview of motors for heavy drones
The article is devoted to an overview of engines used in heavy drones. The main types of engines, their principles of operation, advantages and disadvantages are considered. The article examines a wide range of electric motors, such as brushless DC (collectorless) motors, which are the main components in modern quadcopters. Types of engines, their technical characteristics, as well as their use in specific models of quadcopters are also considered. This article will help you better understand the specifics of different types of motors and how they affect quadcopter functionality and performance.
- 23 July 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of NTU "KhPI". Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice
- No. 1 (11),p. 35-40
Overview of motors for heavy drones
The article is devoted to an overview of engines used in heavy drones. The main types of engines, their principles of operation, advantages and disadvantages are considered. The article examines a wide range of electric motors, such as brushless DC (collectorless) motors, which are the main components in modern quadcopters. Types of engines, their technical characteristics, as well as their use in specific models of quadcopters are also considered. This article will help you better understand the specifics of different types of motors and how they affect quadcopter functionality and performance.