Anatolii Uzhva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anatolii Uzhva has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Anastasia Tishenko
1 shared publication- Mikhail Lysenko1 shared publication
- Mykhailo Podryhalo
Kharkiv National Automobile and Highway University
1 shared publication - Myron Magats
Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies of Lviv
1 shared publication - Oleg Sukach
кандидат технічних наук, доцент, завідувач кафедри «Автомобілів і тракторів, Львівський національний університет природокористування
1 shared publication - Serhii Shuklinov
Kharkiv National Automobile and Highway University
1 shared publication
Latest Publications
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- Open Access
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 5-12
Research of the modernized intake system of the gasoline engine
Problem. In recent years, Ukraine has seen a sharp decline in ambient temperature, especially in the winter. Accordingly, this has a negative impact on the performance of car engines (difficult to start and prolonged warm-up), as the lion's share of private sector cars are parked in open areas and are subject to sudden temperature and humidity changes. Therefore, to partially solve this problem, our attention was focused on the air lines of the intake system of the gasoline engine, as this system is easily accessible and does not require significant design changes for its modernization. Goal. The purpose of the work is to ensure the ease of starting the gasoline engine and reduce the time to warm up. Methodology. Operation of the car in the conditions of the lowered temperatures, essentially promotes deterioration of its fuel economy. The basis of such a negative process of fuel consumption is incomplete combustion of the working mixture. And this is the deterioration of spraying and evaporation of fuel and increasing the duration of engine warm-up. At such low ambient temperatures, the effective operation of the car in a garage depends significantly on the method of its preparation (which should at a minimum cost of fuel and energy resources to ensure rapid and reliable engine start and accelerated warm-up). We decided to obtain thermal energy to heat the inlet air at no additional cost. This is the installation of a gasoline engine with a spark ignition of the incandescent coil in the intake air line, which will receive power from the battery. Such modernization of the system does not require major design changes and significant financial investments Unresolved issues remain to assess the effectiveness of the process of heating the air entering the combustion chamber of the engine to create a working mixture. It should be noted that the optimal heating of the engines is most appropriate to carry out (ie heating the coolant and oil in the engine lubrication system) not to the temperature of the operating thermal mode, but to the temperature that ensures its reliable start. Results. The scheme of connection of a heater of intake air in an onboard electric network of the car is presented. The results of the heat balance of the studied gasoline engine (using cold and heated air flow) during its heating are obtained. The optimum temperature of the warmed-up engine at which further economical operation of the car is possible is established. Originality. This spiral heater was first used to heat the intake air charge during the start-up and warm-up of a gasoline engine. Practical value. The developed heating equipment can be used for both gasoline and diesel internal combustion engines. It should be switched on only during engine start-up and warm-up.
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 5-12
Open AccessResearch of the modernized intake system of the gasoline engine
Problem. In recent years, Ukraine has seen a sharp decline in ambient temperature, especially in the winter. Accordingly, this has a negative impact on the performance of car engines (difficult to start and prolonged warm-up), as the lion's share of private sector cars are parked in open areas and are subject to sudden temperature and humidity changes. Therefore, to partially solve this problem, our attention was focused on the air lines of the intake system of the gasoline engine, as this system is easily accessible and does not require significant design changes for its modernization. Goal. The purpose of the work is to ensure the ease of starting the gasoline engine and reduce the time to warm up. Methodology. Operation of the car in the conditions of the lowered temperatures, essentially promotes deterioration of its fuel economy. The basis of such a negative process of fuel consumption is incomplete combustion of the working mixture. And this is the deterioration of spraying and evaporation of fuel and increasing the duration of engine warm-up. At such low ambient temperatures, the effective operation of the car in a garage depends significantly on the method of its preparation (which should at a minimum cost of fuel and energy resources to ensure rapid and reliable engine start and accelerated warm-up). We decided to obtain thermal energy to heat the inlet air at no additional cost. This is the installation of a gasoline engine with a spark ignition of the incandescent coil in the intake air line, which will receive power from the battery. Such modernization of the system does not require major design changes and significant financial investments Unresolved issues remain to assess the effectiveness of the process of heating the air entering the combustion chamber of the engine to create a working mixture. It should be noted that the optimal heating of the engines is most appropriate to carry out (ie heating the coolant and oil in the engine lubrication system) not to the temperature of the operating thermal mode, but to the temperature that ensures its reliable start. Results. The scheme of connection of a heater of intake air in an onboard electric network of the car is presented. The results of the heat balance of the studied gasoline engine (using cold and heated air flow) during its heating are obtained. The optimum temperature of the warmed-up engine at which further economical operation of the car is possible is established. Originality. This spiral heater was first used to heat the intake air charge during the start-up and warm-up of a gasoline engine. Practical value. The developed heating equipment can be used for both gasoline and diesel internal combustion engines. It should be switched on only during engine start-up and warm-up.
- Open Access
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 13-22
Maximum automobile acceleration
Problem. The disadvantage of current dependences for determining the acceleration indicators at engine maximum brake power and driving tire-to-surface friction coefficients is that they are adequate only if the engine and transmission parameters provide power input to the drive wheels rolling without slipping regardless to speed. To eliminate this drawback, it is necessary to take into account that the power input to the drive wheels depends on the engine shaft speed, and therefore on the speed of the vehicle when accelerating. Goal. The purpose of the work is to further develop the theory of the automobile by improving the dependencies that allow determining the automobile acceleration rates and assessing the nature of its acceleration process from the design factors. Methodology. The approaches taken to achieve this goal are based on laws of physics, theoretical mechanics and the theory of automobile. Results. Analytic dependences for determining maximum and limiting automobile acceleration when speeding up depending on its design factors and speed have been improved. Dependences for determining the range of drive wheel slipping on the automobile speed when accelerating and the limiting automobile acceleration under the condition of its pitch stability have been obtained. When studying the automobile acceleration process theoretically it was found that the developed dependences allow determining the nature of automobile movement and assessing the influence of its design factors on the acceleration indicators. Originality. The obtained dependences for determining the maximum and limiting acceleration, the range of driving speeds with wheel slip when automobile accelerating allowed us to clarify the idea of the nature of movement during acceleration and the influence of automobile design factors on the acceleration indicators. Practical value. The obtained dependences can be used in designing new and improving racing cars such as dragsters, and analysing the dynamics of the vehicle when accelerating with full fuel delivery and determining the nature of driving tire-to-surface friction depending on the driving speed.
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 13-22
Open AccessMaximum automobile acceleration
Problem. The disadvantage of current dependences for determining the acceleration indicators at engine maximum brake power and driving tire-to-surface friction coefficients is that they are adequate only if the engine and transmission parameters provide power input to the drive wheels rolling without slipping regardless to speed. To eliminate this drawback, it is necessary to take into account that the power input to the drive wheels depends on the engine shaft speed, and therefore on the speed of the vehicle when accelerating. Goal. The purpose of the work is to further develop the theory of the automobile by improving the dependencies that allow determining the automobile acceleration rates and assessing the nature of its acceleration process from the design factors. Methodology. The approaches taken to achieve this goal are based on laws of physics, theoretical mechanics and the theory of automobile. Results. Analytic dependences for determining maximum and limiting automobile acceleration when speeding up depending on its design factors and speed have been improved. Dependences for determining the range of drive wheel slipping on the automobile speed when accelerating and the limiting automobile acceleration under the condition of its pitch stability have been obtained. When studying the automobile acceleration process theoretically it was found that the developed dependences allow determining the nature of automobile movement and assessing the influence of its design factors on the acceleration indicators. Originality. The obtained dependences for determining the maximum and limiting acceleration, the range of driving speeds with wheel slip when automobile accelerating allowed us to clarify the idea of the nature of movement during acceleration and the influence of automobile design factors on the acceleration indicators. Practical value. The obtained dependences can be used in designing new and improving racing cars such as dragsters, and analysing the dynamics of the vehicle when accelerating with full fuel delivery and determining the nature of driving tire-to-surface friction depending on the driving speed.