Mykhailo Podryhalo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mykhailo Podryhalo has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Ruslan Kaidalov
National Academy of the National Guard of Ukraine
2 shared publications - Vasyl Omelchenko
National Academy of the National Guard of Ukraine
2 shared publications - Vitalii Shein2 shared publications
- Anatolii Uzhva
Харківський національний автомобільно-дорожній університет, 61002, Україна, м. Харків, вул. Ярослава Мудрого, 25
1 shared publication - Dmytro Klets
Kharkiv National Automobile and Highway University
1 shared publication - Igor Gritsuk
Faculty of Special Technology, Alexander Dubcek University of Trencin, Ku kyselke 469, 911 06 Trenčín, Slovakia
1 shared publication
Latest Publications
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- Open Access
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Application of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Open AccessApplication of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- Open Access
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 33-39
Cycle mechanical coefficient of useful effect of motor-transmission installations of transportation and tractor vehicles
Problem. When determining the efficiency coefficient of the motor-transmission systems of cars and tractors, it is necessary to consider not only the losses due to viscous and dry friction but also the losses caused by the circulation of potential and kinetic energy within the transmission. These losses result from the use of typical internal combustion engines in motor-transmission systems. Currently, existing studies do not take into account the dynamic cyclic energy losses in the transmission, which prevents an accurate assessment of the cyclic efficiency coefficient. Purpose. The purpose is to determine the cyclic efficiency coefficient of motor-transmission systems with internal combustion engines, taking into account the cyclic dynamic efficiency coefficient of the transmission in vehicles equipped with internal combustion engines. Methodology. The approaches adopted in this work to achieve the stated goal are based on the theoretical foundations for determining the dynamic efficiency coefficient, the work balance in the motor-transmission system of a car (or tractor) over one oscillation period of the indicator torque and the angular velocities of the engine's crankshaft during one oscillation period of its torque. Results. The cyclic mechanical efficiency coefficient of motor-transmission systems in wheeled machines has been determined, accounting for the losses associated with the acceleration of moving masses and the torque irregularities inherent to internal combustion engines. A relationship has been established in which the cyclic coefficients of dynamic and elastic losses are equal to zero when the torque irregularity coefficient is zero, a characteristic typical of electric motors. Originality. The results of the study provide a general understanding of the proportionality of the cyclic dynamic coefficient of mechanical losses in the transmission to the torque irregularity coefficient and the difference between the squares of the circular frequencies of torque oscillations and the natural (free) oscillations of the transmission input shaft. Practical meaning. The obtained results can be recommended for identifying frequency coincidences that lead to resonance, where the cyclic coefficients of elastic and dynamic losses increase sharply
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 33-39
Open AccessCycle mechanical coefficient of useful effect of motor-transmission installations of transportation and tractor vehicles
Problem. When determining the efficiency coefficient of the motor-transmission systems of cars and tractors, it is necessary to consider not only the losses due to viscous and dry friction but also the losses caused by the circulation of potential and kinetic energy within the transmission. These losses result from the use of typical internal combustion engines in motor-transmission systems. Currently, existing studies do not take into account the dynamic cyclic energy losses in the transmission, which prevents an accurate assessment of the cyclic efficiency coefficient. Purpose. The purpose is to determine the cyclic efficiency coefficient of motor-transmission systems with internal combustion engines, taking into account the cyclic dynamic efficiency coefficient of the transmission in vehicles equipped with internal combustion engines. Methodology. The approaches adopted in this work to achieve the stated goal are based on the theoretical foundations for determining the dynamic efficiency coefficient, the work balance in the motor-transmission system of a car (or tractor) over one oscillation period of the indicator torque and the angular velocities of the engine's crankshaft during one oscillation period of its torque. Results. The cyclic mechanical efficiency coefficient of motor-transmission systems in wheeled machines has been determined, accounting for the losses associated with the acceleration of moving masses and the torque irregularities inherent to internal combustion engines. A relationship has been established in which the cyclic coefficients of dynamic and elastic losses are equal to zero when the torque irregularity coefficient is zero, a characteristic typical of electric motors. Originality. The results of the study provide a general understanding of the proportionality of the cyclic dynamic coefficient of mechanical losses in the transmission to the torque irregularity coefficient and the difference between the squares of the circular frequencies of torque oscillations and the natural (free) oscillations of the transmission input shaft. Practical meaning. The obtained results can be recommended for identifying frequency coincidences that lead to resonance, where the cyclic coefficients of elastic and dynamic losses increase sharply
- Open Access
- 28 November 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 2,p. 131-136
MODERNIZATION OF THE REAR THREE-JOINT SUSPENSION SYSTEM FOR TRACTOR SELF-PROPELLED CHASSIS T-16MG
The conducted analysis showed that with the wide distribution of wheeled tractors, self-propelled tractor chassis are widely used, which ensure the effective implementation of technological processes in agriculture, vegetable growing, animal husbandry, personal peasant and farm farms. Also, the analysis of publications showed that the issue of the rear hinged system for the TRS has not been paid attention to in the last 30 years. The main goal is to modernize the rear mounted system of the TSSH - T-16MG, which will allow it to be used effectively when working with various mounted units, which is very important for personal peasant and farm households. One of the reasons for the development was that in the T-16MG self-propelled chassis, the rear axle housing was cast from updated lightweight alloys, which caused a number of problems with the use of the suspension for the SSh-25. Having worked out all the shortcomings of the three-point hitch system for the SSh-25 self-propelled tractor chassis, the rear hydraulic hitch for the T-16MG tractor self-propelled chassis was developed. To transport trailers, the auto-coupling triangle is removed and placed crosswise in ball joints to the right and left cheek on which the coupling device is attached. With frequent replacement of mounted and trailed units, this crossbar can be welded into the lower part of the auto-clutch triangle. The developed rear attachment allows to improve the conditions of use of the T-16MG self-propelled chassis, using the attachment of agricultural implements (one- and two-body plows, cultivators and other machines and tools). The device also allows you to use trailed agricultural machines and implements (rollers, harrows, rakes, dump trailers, and others). Hydraulic mounted equipment allows you to transfer machines and tools from the transport position to the working position and vice versa, ensures the correct position of the working bodies of mounted machines and tools relative to the soil when performing various agricultural works. Reinforced fastening of the attached equipment increases its reliability and allows you to avoid breakdowns that require complex and expensive repairs. For greater strength and to reduce the number of malfunctions of the rear hitch, fastening was added with the help of longitudinal spars, and not only to the rear axle, as was the case with the hitch before the SH-25
- 28 November 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 2,p. 131-136
Open AccessMODERNIZATION OF THE REAR THREE-JOINT SUSPENSION SYSTEM FOR TRACTOR SELF-PROPELLED CHASSIS T-16MG
The conducted analysis showed that with the wide distribution of wheeled tractors, self-propelled tractor chassis are widely used, which ensure the effective implementation of technological processes in agriculture, vegetable growing, animal husbandry, personal peasant and farm farms. Also, the analysis of publications showed that the issue of the rear hinged system for the TRS has not been paid attention to in the last 30 years. The main goal is to modernize the rear mounted system of the TSSH - T-16MG, which will allow it to be used effectively when working with various mounted units, which is very important for personal peasant and farm households. One of the reasons for the development was that in the T-16MG self-propelled chassis, the rear axle housing was cast from updated lightweight alloys, which caused a number of problems with the use of the suspension for the SSh-25. Having worked out all the shortcomings of the three-point hitch system for the SSh-25 self-propelled tractor chassis, the rear hydraulic hitch for the T-16MG tractor self-propelled chassis was developed. To transport trailers, the auto-coupling triangle is removed and placed crosswise in ball joints to the right and left cheek on which the coupling device is attached. With frequent replacement of mounted and trailed units, this crossbar can be welded into the lower part of the auto-clutch triangle. The developed rear attachment allows to improve the conditions of use of the T-16MG self-propelled chassis, using the attachment of agricultural implements (one- and two-body plows, cultivators and other machines and tools). The device also allows you to use trailed agricultural machines and implements (rollers, harrows, rakes, dump trailers, and others). Hydraulic mounted equipment allows you to transfer machines and tools from the transport position to the working position and vice versa, ensures the correct position of the working bodies of mounted machines and tools relative to the soil when performing various agricultural works. Reinforced fastening of the attached equipment increases its reliability and allows you to avoid breakdowns that require complex and expensive repairs. For greater strength and to reduce the number of malfunctions of the rear hitch, fastening was added with the help of longitudinal spars, and not only to the rear axle, as was the case with the hitch before the SH-25
- Open Access
- 12 July 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 19 (1) , 103-108
Installing two internal combustion engines in series on a vehicle as a method of reducing torque unevenness
An analysis of studies on the possibility of reducing fuel consumption of cars by replacing their power plants with two internal combustion engines installed in series is carried out. It has been determined that it is possible to reduce fuel consumption by reducing the unevenness of torque at the transmission input shaft, which in turn depends on the relative angular orientation of the crankshafts of the installed internal combustion engines. The study has determined that when installing two consecutive internal combustion engines, each of which generates an indicator torque that obeys the harmonic law, it makes it possible to shift the curves of the indicator torque and the crankshaft angle so that both engines operate in opposite phases. It is proposed to use a method of increasing the energy efficiency of cars by using two consecutive internal combustion engines, the crankshafts of which are installed relative to their initial angular position with the difference in the angular coordinates (angles of rotation) of the crankshafts of both engines relative to the initial position, which allows to reduce unproductive energy losses. Approximating the actual curves of change of the indicator torque by the harmonic law, taking into account the angle of rotation of the crankshaft, graphs of dependence of the indicator torque on the angle of rotation of the crankshaft of four-stroke internal combustion engines with different numbers of cylinders are constructed. It has been determined that with an increase in the number of cylinders of an internal combustion engine and the coefficient of the share of torque on the drive wheels, there is a decrease in the coefficient of unproductive energy consumption, which takes into account the influence of the unevenness of the indicator torque. The problem of ensuring the operation of the second engine in the counterphase of the first engine is solved, which should be fulfilled by the ratio of the angles of rotation of the crankshafts of the first and second engines relative to the initial (zero) position with the difference in the angular coordinates (angles of rotation) of the crankshafts of both engines relative to the initial position. The results of calculating the angle of the crankshafts' relative position when two internal combustion engines are installed sequentially in the opposite phase indicate a decrease in this angle with an increase in the number of cylinders.
- 12 July 2024
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 19 (1) , 103-108
Open AccessInstalling two internal combustion engines in series on a vehicle as a method of reducing torque unevenness
An analysis of studies on the possibility of reducing fuel consumption of cars by replacing their power plants with two internal combustion engines installed in series is carried out. It has been determined that it is possible to reduce fuel consumption by reducing the unevenness of torque at the transmission input shaft, which in turn depends on the relative angular orientation of the crankshafts of the installed internal combustion engines. The study has determined that when installing two consecutive internal combustion engines, each of which generates an indicator torque that obeys the harmonic law, it makes it possible to shift the curves of the indicator torque and the crankshaft angle so that both engines operate in opposite phases. It is proposed to use a method of increasing the energy efficiency of cars by using two consecutive internal combustion engines, the crankshafts of which are installed relative to their initial angular position with the difference in the angular coordinates (angles of rotation) of the crankshafts of both engines relative to the initial position, which allows to reduce unproductive energy losses. Approximating the actual curves of change of the indicator torque by the harmonic law, taking into account the angle of rotation of the crankshaft, graphs of dependence of the indicator torque on the angle of rotation of the crankshaft of four-stroke internal combustion engines with different numbers of cylinders are constructed. It has been determined that with an increase in the number of cylinders of an internal combustion engine and the coefficient of the share of torque on the drive wheels, there is a decrease in the coefficient of unproductive energy consumption, which takes into account the influence of the unevenness of the indicator torque. The problem of ensuring the operation of the second engine in the counterphase of the first engine is solved, which should be fulfilled by the ratio of the angles of rotation of the crankshafts of the first and second engines relative to the initial (zero) position with the difference in the angular coordinates (angles of rotation) of the crankshafts of both engines relative to the initial position. The results of calculating the angle of the crankshafts' relative position when two internal combustion engines are installed sequentially in the opposite phase indicate a decrease in this angle with an increase in the number of cylinders.
- 16 February 2024
- Published by Springer Nature
- p. 143-148
Rational Choice of Powers Ration of Engines of Tractor Vehicle and Active Trailer Link
- 16 February 2024
- Published by Springer Nature
- p. 143-148
Rational Choice of Powers Ration of Engines of Tractor Vehicle and Active Trailer Link
- 27 December 2023
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (8(39))
Improving the Accuracy of Wheeled Vehicle Acceleration Estimation During Testing
Michael Podryhalo, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: pmikhab@gmail.com, ORCID ID: 0000-0003-2426-0336 Olexand Polyanskyi, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: khadi.pas@gmail.com Yevgeniy Dubinin, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: dubinin-rmn@ukr.net, ORCID ID: 0000-0002-6176-7358 Dmytro Klets, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: prof_777@ ukr.net, ORCID ID: 0000-0001-7463-1030 Vladyslava Baidala, Assistant, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: vlada.baidala@gmail.com, ORCID ID: 0000-0002-6009-055X Maksym Krasnokutskyi, post graduate, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, Україна, e-mail: simson1988@ukr.net The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.technologies of power plants of cars are developing rapidly, are aimed at reducing fuel consumption. A combination of internal combustion and electric motors in hybrid cars makes it possible to achieve an optimal balance between fuel efficiency and environmental friendliness, and ensures convenience and performance when driving on the road.
- 27 December 2023
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (8(39))
Improving the Accuracy of Wheeled Vehicle Acceleration Estimation During Testing
Michael Podryhalo, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: pmikhab@gmail.com, ORCID ID: 0000-0003-2426-0336 Olexand Polyanskyi, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: khadi.pas@gmail.com Yevgeniy Dubinin, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: dubinin-rmn@ukr.net, ORCID ID: 0000-0002-6176-7358 Dmytro Klets, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: prof_777@ ukr.net, ORCID ID: 0000-0001-7463-1030 Vladyslava Baidala, Assistant, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: vlada.baidala@gmail.com, ORCID ID: 0000-0002-6009-055X Maksym Krasnokutskyi, post graduate, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, Україна, e-mail: simson1988@ukr.net The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.The study considers the influence of installation errors during the installation of linear acceleration sensors on the accuracy of measurements during testing of wheeled vehicles, including the dynamic stability of the position. The possibility of automatic correction of these errors to improve measurement accuracy is considered. The work includes establishing the dependence of linear acceleration components on the angular deviations of the axes of the wheeled vehicle coordinate system and developing a method of automatic correction in real time to ensure high quality measurements and maintain the reliability of measurement systems.technologies of power plants of cars are developing rapidly, are aimed at reducing fuel consumption. A combination of internal combustion and electric motors in hybrid cars makes it possible to achieve an optimal balance between fuel efficiency and environmental friendliness, and ensures convenience and performance when driving on the road.
- Open Access
- 16 October 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 1,p. 40-46
Analysis of energy efficiency indicators of multy-axle automobiles and multy-link road trains
В статті показана необхідність підвищення енергетичної ефективності багатовісних автомобілів та автопоїздів шляхом вдосконалення методів проектування за рахунок застосування нових показників та критеріїв. Визначено взаємозв’язок між показником енергетичної ефективності та параметрами аеродинамічного опору автомобіля; проведення оцінки впливу причіпних ланок на енергетичну ефективність автопоїзда. Доведено вплив аеродинамічних параметрів на показник енергетичної ефективності автомобіля. Доведено, що зі зростанням максимальної швидкості автомобіля показник енергетичної ефективності росте при n>1 та падає при nn=1 максимальна швидкість автомобіля не впливає на показник енергетичної ефективності. Також визначено вплив причіпних ланок на енергетичну ефективність автомобільного поїзда. Зі збільшенням числа причіпних ланок відбувається збільшення маси вантажа, що перевозиться та зменшення ККД колісного рушія автопоїзда
- 16 October 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 1,p. 40-46
Open AccessAnalysis of energy efficiency indicators of multy-axle automobiles and multy-link road trains
В статті показана необхідність підвищення енергетичної ефективності багатовісних автомобілів та автопоїздів шляхом вдосконалення методів проектування за рахунок застосування нових показників та критеріїв. Визначено взаємозв’язок між показником енергетичної ефективності та параметрами аеродинамічного опору автомобіля; проведення оцінки впливу причіпних ланок на енергетичну ефективність автопоїзда. Доведено вплив аеродинамічних параметрів на показник енергетичної ефективності автомобіля. Доведено, що зі зростанням максимальної швидкості автомобіля показник енергетичної ефективності росте при n>1 та падає при nn=1 максимальна швидкість автомобіля не впливає на показник енергетичної ефективності. Також визначено вплив причіпних ланок на енергетичну ефективність автомобільного поїзда. Зі збільшенням числа причіпних ланок відбувається збільшення маси вантажа, що перевозиться та зменшення ККД колісного рушія автопоїзда
- Open Access
- 1 March 2023
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1277 (1) , 012023
Rational choice of torques distribution between the front and back electric motors of automobile wheels drive
Two-axle all-wheel drive automobiles and the procedure for determining the torques between the front and back driving wheels are considered. The influence of the distribution of torques between the front and back driving wheels of all-wheel drive two-axle automobiles on their controllability, stability and energy efficiency is analyzed. A study was conducted to improve the energy efficiency of two-axle automobiles by rationally choosing the torque distribution coefficient between the front and back wheels. A mathematical model of the efficiency ratio of the wheel drive of a two-axle automobile was obtained, which makes it possible to determine the ratio of the rational distribution of torques between the front and back wheels through its optimization. It has been proven that the use of electric automobiles and automobiles with a combined power unit will allow to control the distribution of torques between their front and back wheels controlled by electric motors. The proposed rational choice of the distribution of torques between the front and rear electric motors of the wheel drive will allow to increase the efficiency of the wheel drive and improve the energy efficiency not only of single electric automobiles and hybrid automobiles, but also of road trains that use a combined electromechanical drive of the driving wheels.
- 1 March 2023
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1277 (1) , 012023
Open AccessRational choice of torques distribution between the front and back electric motors of automobile wheels drive
Two-axle all-wheel drive automobiles and the procedure for determining the torques between the front and back driving wheels are considered. The influence of the distribution of torques between the front and back driving wheels of all-wheel drive two-axle automobiles on their controllability, stability and energy efficiency is analyzed. A study was conducted to improve the energy efficiency of two-axle automobiles by rationally choosing the torque distribution coefficient between the front and back wheels. A mathematical model of the efficiency ratio of the wheel drive of a two-axle automobile was obtained, which makes it possible to determine the ratio of the rational distribution of torques between the front and back wheels through its optimization. It has been proven that the use of electric automobiles and automobiles with a combined power unit will allow to control the distribution of torques between their front and back wheels controlled by electric motors. The proposed rational choice of the distribution of torques between the front and rear electric motors of the wheel drive will allow to increase the efficiency of the wheel drive and improve the energy efficiency not only of single electric automobiles and hybrid automobiles, but also of road trains that use a combined electromechanical drive of the driving wheels.