Xingqi Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xingqi Liu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Zhixiang Zou
Southeast University
5 shared publications - Giampaolo Buticchi
Faculty of Science and Engineering, University of Nottingham Ningbo China, Ningbo, China
2 shared publications Jian Tang
School of Electrical Engineering, Southeast University, Nanjing, China
2 shared publications- Jian Tang
School of Electrical Engineering, Southeast University, Nanjing, China
2 shared publications - Ming Cheng
Southeast University
2 shared publications - Wu Chen
Southeast University
2 shared publications
Latest Publications
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 14208-14219
Design of Filter-Based Stabilizing Control for PLL-Synchronized Converters
The phase-locked loop (PLL) has an important effect on the system stability of grid-connected converters in weak grids. In the literature, parameter tuning methods and stabilizing control strategies have been proposed to deal with this problem. However, most of them target at tuning parameters of PLL or mitigating the negative damping as well as the phase lag introduced by the PLL, while the interactions between the PLL and the current control and the cross coupling effects are still not fully explored in the design procedure of stabilizing control. To address this issue, this article extends the study of the interaction between the PLL and the current control using a multiple-input multiple-output (MIMO) model, and then proposes a design criterion of the stabilizing control using design-oriented analysis from the perspective of MIMO impedance model. A category of stabilizing control schemes that uses different types of biquad filters is proposed following the criterion, which not only improves system stability but also removes the coupling between the PLL and the current control according to the sensitivity analysis. Hardware-in-the-loop and experimental results are provided to verify the effectiveness of the proposed control schemes.
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 14208-14219
Design of Filter-Based Stabilizing Control for PLL-Synchronized Converters
The phase-locked loop (PLL) has an important effect on the system stability of grid-connected converters in weak grids. In the literature, parameter tuning methods and stabilizing control strategies have been proposed to deal with this problem. However, most of them target at tuning parameters of PLL or mitigating the negative damping as well as the phase lag introduced by the PLL, while the interactions between the PLL and the current control and the cross coupling effects are still not fully explored in the design procedure of stabilizing control. To address this issue, this article extends the study of the interaction between the PLL and the current control using a multiple-input multiple-output (MIMO) model, and then proposes a design criterion of the stabilizing control using design-oriented analysis from the perspective of MIMO impedance model. A category of stabilizing control schemes that uses different types of biquad filters is proposed following the criterion, which not only improves system stability but also removes the coupling between the PLL and the current control according to the sensitivity analysis. Hardware-in-the-loop and experimental results are provided to verify the effectiveness of the proposed control schemes.
- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 42, 2410-2414
Design of Stabilizing Control of Smart Transformer Using an Asymmetric Resonant Filter
Smart transformer (ST) is usually used to solve system level problems. However, ST low-voltage sider converter will couple with the grid-connected converters and stability and harmonic oscillations problems occur. To solve this problem, this paper studies the filter impact on the stability and an asymmetric resonant filter is proposed. Based on the proposed filter, the stabilizing control strategy is proposed to make system perform better. The proposed control strategy has following advantages: 1) It can realize centralized control, and avoid complex calculations and operation processes; 2) Compared with other methods, the implementation method is relatively simple, only the harmonic frequency should be given. The simulation results is used to verify the the effectiveness of the proposed control strategy.
- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 42, 2410-2414
Design of Stabilizing Control of Smart Transformer Using an Asymmetric Resonant Filter
Smart transformer (ST) is usually used to solve system level problems. However, ST low-voltage sider converter will couple with the grid-connected converters and stability and harmonic oscillations problems occur. To solve this problem, this paper studies the filter impact on the stability and an asymmetric resonant filter is proposed. Based on the proposed filter, the stabilizing control strategy is proposed to make system perform better. The proposed control strategy has following advantages: 1) It can realize centralized control, and avoid complex calculations and operation processes; 2) Compared with other methods, the implementation method is relatively simple, only the harmonic frequency should be given. The simulation results is used to verify the the effectiveness of the proposed control strategy.
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 4 (3) , 756-766
Stability Analysis of Power Converter-Based Constant Power Load With Reduced-Order Model
The negative incremental resistive feature is one characteristic of power electronics-based constant power load, which may cause system instability. However, the stability assessment of such a system is not easy and the computation burden is usually heavy due to the complexity of the models. With this consideration, a simplified model using Jordan continued-fraction expansion is proposed to reduce the model complexity while the accuracy can be maintained entire the whole frequency range. Moreover, this paper thoroughly analyzes the impact of different control elements and their parameters of three-phase converter-based constant power load on system stability based on the analysis of the reduced-order impedance model. The parameter sensitivity analysis is carried out to reveal the influence of different parameters on the system stability. Simulation and experimental results are provided to verify the effectiveness of the reduced-order model and the theocratical analysis.
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 4 (3) , 756-766
Stability Analysis of Power Converter-Based Constant Power Load With Reduced-Order Model
The negative incremental resistive feature is one characteristic of power electronics-based constant power load, which may cause system instability. However, the stability assessment of such a system is not easy and the computation burden is usually heavy due to the complexity of the models. With this consideration, a simplified model using Jordan continued-fraction expansion is proposed to reduce the model complexity while the accuracy can be maintained entire the whole frequency range. Moreover, this paper thoroughly analyzes the impact of different control elements and their parameters of three-phase converter-based constant power load on system stability based on the analysis of the reduced-order impedance model. The parameter sensitivity analysis is carried out to reveal the influence of different parameters on the system stability. Simulation and experimental results are provided to verify the effectiveness of the reduced-order model and the theocratical analysis.
- Open Access
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 3, 61-74
Stability Assessment of A Radial Grid With Power Converters
The increase proportion of power converters causes stability problems in the radial grid. To address these issues, this paper firstly proposes a unified modeling procedure and applies it to two types of converters. Secondly, the impedance models are used to analyze the stability of a radial grid with converters under four cases. The influence of the short circuit ratio (SCR) and line impedance on system stability are investigated. Then, a comprehensive sensitivity analysis is performed in order to investigate the effects of parameters variations on the closed-loop poles of the system under different conditions. Finally, the accuracy of the model and theoretical analysis are verified by simulations and Hardware-in-the-Loop (HiL) tests.
- 28 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 3, 61-74
Open AccessStability Assessment of A Radial Grid With Power Converters
The increase proportion of power converters causes stability problems in the radial grid. To address these issues, this paper firstly proposes a unified modeling procedure and applies it to two types of converters. Secondly, the impedance models are used to analyze the stability of a radial grid with converters under four cases. The influence of the short circuit ratio (SCR) and line impedance on system stability are investigated. Then, a comprehensive sensitivity analysis is performed in order to investigate the effects of parameters variations on the closed-loop poles of the system under different conditions. Finally, the accuracy of the model and theoretical analysis are verified by simulations and Hardware-in-the-Loop (HiL) tests.
- 8 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01-07
Robust Control of Smart Transformer-fed Grid
The Smart Transformer (ST) is a solid-state transformer with control and communication functionalities, interfacing medium voltage and low voltage (LV) grids. The ST-fed grid has high potential to optimize power system and avoid or postpone the reinforcement of distribution networks. However, with the increasing utilization of power converters, the challenges in terms of system stability are encountered. To better understand the problems, this paper firstly develops the models of ST LV converter and grid-forming as well as grid-following converters used in the LV grid. Then, the stability of a ST-fed grid with different types of converters is studied by considering the effect of line impedance. To address the stability issues, a robust control strategy is proposed for the ST LV converter. Simulation results are provided to validate the effectiveness of the proposed control scheme.
- 8 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01-07
Robust Control of Smart Transformer-fed Grid
The Smart Transformer (ST) is a solid-state transformer with control and communication functionalities, interfacing medium voltage and low voltage (LV) grids. The ST-fed grid has high potential to optimize power system and avoid or postpone the reinforcement of distribution networks. However, with the increasing utilization of power converters, the challenges in terms of system stability are encountered. To better understand the problems, this paper firstly develops the models of ST LV converter and grid-forming as well as grid-following converters used in the LV grid. Then, the stability of a ST-fed grid with different types of converters is studied by considering the effect of line impedance. To address the stability issues, a robust control strategy is proposed for the ST LV converter. Simulation results are provided to validate the effectiveness of the proposed control scheme.