SWShin-Yuan Wang

Shin-Yuan Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shin-Yuan Wang has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dielectric Engineering for Sub-Nanometer Equivalent Oxide Thickness in Double-Gate WS2-FETs Using All-ALD-HfO2/ h -AlN Gate Stacks

    by Shin-Yuan Wang, Shu-Jui Chang, Yu-Che Huang, Jia Hao Chih, Yu-Chin Lin, Kuan-Bo Lin, Kuan-Yu Yeh, Chenming Hu, Chao-Hsin Chien

    This study reports a gate stack composed of an ultrathin epitaxial hexagonal aluminum nitride (h-AlN) interfacial layer (IL) deposited by plasma-enhanced atomic layer deposition (PEALD) between hafnium oxide (HfO2) and a monolayer tungsten disulfide (WS2) channel. The inherently inert surfaces of two-dimensional (2D) materials have hindered the deposition of ultrathin IL by ALD. By optimizing the h-AlN growth conditions and incorporating an in situ H2 cleaning process, a high-quality epitaxial h-AlN interfacial layer was achieved on monolayer WS2. Combined with subsequent HfO2 thickness scaling, the optimized gate stack achieved an extracted EOT of 0.68 ± 0.22 nm while maintaining a low gate leakage current density of 10–2 A/cm2, meeting the 2028 standards for low-power transistors in the International Roadmap for Device and Systems (IRDS). Furthermore, the fabricated HfO2/h-AlN/WS2 dual-gate (DG) field-effect transistors (FETs) exhibited low subthreshold swing (SS), near-zero hysteresis, and excellent electrostatic gate control.

  • BEOL-Compatible 5.6 nm Ultrathin HZO With Molybdenum Nitride Electrode and IN 2 O 3 Channel Devices for Enhanced Ferroelectricity and Reliability

    by Li-Cheng Teng, Yu-Che Huang, Shin-Yuan Wang, Yu-Hsien Lin, Chao-Hsin Chien

    In this letter, we have successfully fabricated a metal-ferroelectricity-metal (MFM) capacitor of an ultrathin 5.6 nm HZO and ultrathin In2O3 back gate devices in a back-end-of-line (BEOL) compatible process. By proposing a novel atomic layer deposition (ALD) scheme and an alternative bottom electrode treatment, the MoN-HZO sample shows an average 2Pr value of 64 $\mu$C/cm2 (with a standard deviation of 0.52) and high endurance ($\Delta \, 2\rm {Pr}/2\rm {Pr}_\rm {pristine} \approx 2\, \%$ from pristine to 1010 cycles). The MoN.HZO stack integrated with an ultrathin In2O3 back gate exhibits a memory window (MW) greater than 2.5 V and excellent endurance and data retention characteristics. With a maximum process temperature of 400 $^{\circ }$C, our approach meets the stringent requirements for Back-End-of-Line (BEOL) integration.


  • BEOL-Compatible Ferroelectric Capacitor of 5 nm Ultrathin HZO With High Remanent Polarization and Excellent Endurance

    by Li-Cheng Teng, Yu-Che Huang, Shu-Jui Chang, Shin-Yuan Wang, Yu-Hsien Lin, Chao-Hsin Chien

    In this letter, we have successfully fabricated a metal-ferroelectricity-metal (MFM) capacitor of an ultrathin 5 nm HZO utilizing Molybdenum (Mo) as the electrodes. By proposing a novel atomic layer deposition (ALD) scheme, we overcome the challenge of oxidation of the lower Mo electrode; a 2 nm HZO deposited by thermally enhanced ALD followed by a 3 nm HZO deposited by plasma enhanced ALD. The fabricated sample demonstrated a 2Pr value of 38.5 μC/cm 2 at an operating voltage of 2V. Furthermore, in endurance testing, the sample maintained a 2Pr value of 36.9 μC/cm 2 even after 10 10 cycles (△2Pr/2Pr pristine ≈ 7% from pristine to 10 10 cycles). With a maximum process temperature of 400°C, our approach thereby meets the stringent requirement of Back-End-of-Line (BEOL) integration.


  • Suppressing Threshold Voltage Drift in Sub-2 nm In2O3 Transistors With Improved Thermal Stability

    by Kris K. H. Lin, Li-Cheng Teng, Tzu-Ting Weng, Tzu-Jie Lin, Jian-Cun Lin, Shin-Yuan Wang, Po-Hsun Ho, Wei-Yen Woon, Chi-Chung Kei, Tsung-Te Chou, et al.

    Ultrathin In 2 O 3 films with a thickness of less than 2 nm have emerged as highly intriguing semiconductor channels owing to their exceptional electronic properties. However, their process reliability, particularly the challenge of threshold voltage (VT) drift during gate-stack processing, hinders their potential applications in back-end-of-line (BEOL). This study explores the VT shift induced by stacked HfO2, showing both thermal atomic layer deposition (T-ALD) and plasma-enhanced atomic layer deposition (PE-ALD) cause significant VT shift in ultrathin In 2 O 3 . To mitigate VT shift, we introduce a pre-dielectric stacking, solution-based treatment, which can effectively passivate oxygen-related defects in ultrathin In 2 O 3 , maintaining VT without adversely affecting electrical properties. Utilizing this technique, we have successfully demonstrated the first top-gate In 2 O 3 transistor without the requirement of post-fabrication annealing to uphold the on/off ratio. The developed top-gate device also exhibits superior thermal stability, suggesting its potential for future monolithic 3D integration applications.


  • Open Access

    Conformal bilayer h-AlN epitaxy on WS2 by ALD with ultralow leakage current

    by Shin-Yuan Wang, Shu-Jui Chang, Yu-Che Huang, Jia Hao Chih, Yu-Chin Lin, Chao-Ching Cheng, Iuliana Radu, Chenming Hu, Chao-Hsin Chien

    In this work, we develop an ultrathin epitaxial h-AlN as an interfacial layer (IL) between HfO2 and monolayer WS2 channel by atomic layer deposition (ALD). The growth of ultrathin dielectrics using ALD has been challenging due to the dangling-bond-free surface of 2D materials. By utilizing sub-1 nm h-AlN as an IL and depositing HfO2 high-k dielectric, we were able to form a uniform and atomically flat gate dielectric without voids. The resulting structure exhibits an equivalent oxide thickness as low as 1 nm and ultra-low leakage currents of ∼10−6 A/cm2. The fabricated top-gate WS2 transistors demonstrate on-off ratios of around 106 and subthreshold swing as low as 93 mV/dec. Furthermore, we have verified the feasibility of using h-AlN IL for a gate-all-around structure. Our work presents a CMOS-compatible low-temperature ALD process for integrating gate dielectrics, offering excellent thickness scalability and uniform coverage around monolayer WS2 nanosheets. The combination of high-quality two-dimensional dielectrics and semiconductors will contribute to the development of future high-performance and low-power electronic devices.


  • Open Access

    Demonstration of HfO2-Based Gate Dielectric With ~0.8-nm Equivalent Oxide Thickness on Si0.8Ge0.2 by Trimethylaluminum Pre-Treatment and Al Scavenger

    by Meng-Chien Lee, Wei-Lun Chen, Yi-Yang Zhao, Shin-Yuan Wang, Guang-Li Luo, Chao-Hsin Chien

    We disclosed HfO2-based dielectric of superb electrical properties on p-type Si0.8Ge0.2 substrate using an interfacial layer (IL) formed by trimethylaluminum (TMA) pre-treatment and Al scavenger. Our results revealed that the interface trap density (Dit) value and the gate leakage current (JG) could be improved about 60 times and 100 times by tuning the gate electrode composition without sacrificing equivalent oxide thickness (EOT) performance. The mechanism underlying the Dit improvement of the SiGe metal-oxide-semiconductor capacitors (MOSCAPs) might be owing to the Al metal scavenger and the minimization of the oxygen atoms diffusing to the high-K/SiGe IL, verified by x-ray photoelectron spectroscopy (XPS) analyses. In addition, the hysteresis levels of SiGe capacitors with various gate electrodes were measured to find out the optimized configuration of metal electrodes. This work demonstrated the Al scavenger effect from the aspects of both material and electrical properties and achieved an impressive EOT value of 0.8nm for the capacitors fabricated on the SiGe substrate.


  • Aggressive Equivalent Oxide Thickness of ~0.7 nm on Si0.8Ge0.2 Through HfO2 Dielectric Direct Deposition

    by Meng-Chien Lee, Yi-Yang Zhao, Wei-Lun Chen, Shin-Yuan Wang, Yi-Xuan Chen, Guang-Li Luo, Chao-Hsin Chien

    This study demonstrated the ultralow equivalent oxide thickness (EOT) value of 0.72 nm and the high-quality high- $\kappa $ /Si0.8Ge0.2 interface on p-type Si0.8Ge0.2 with direct deposition of HfO2. The ultrathin interfacial layer (IL) thickness of ~0.4 nm was observed in the high-resolution transmission electron microscope (HRTEM) images. The high-quality interface might result from the high- $\kappa $ /Si0.8Ge0.2 interface mainly consisting of the higher Si oxidation states, verified by X-ray photoelectron spectroscopy (XPS). Thus, this study refutes the necessity of IL formation and paves the way for low-EOT Si0.8Ge0.2 devices.


  • Open Access

    van der Waals epitaxy of 2D h-AlN on TMDs by atomic layer deposition at 250 °C

    by Shu-Jui Chang, Shin-Yuan Wang, Yu-Che Huang, Jia Hao Chih, Yu-Ting Lai, Yi-Wei Tsai, Jhih-Min Lin, Chao-Hsin Chien, Ying-Tsan Tang, Chenming Hu

    We report the demonstration of growing two-dimensional (2D) hexagonal-AlN (h-AlN) on transition metal dichalcogenide (TMD) monolayers (MoS2, WS2, and WSe2) via van der Waals epitaxy by atomic layer deposition (ALD). Having atomically thin thickness and high theoretical carrier mobility, TMDs are attractive semiconductors for future dense and high-performance 3D IC, and 2D hexagonal boron nitride (h-BN) as a gate dielectric is known to significantly improve TMD device performance. However, h-BN growth requires 1000 °C temperature that is not compatible with CMOS fabrication, and ALD deposition of any high-k 2D insulator on TMD continues to be an elusive goal. The epitaxial 2D layered h-AlN by low-temperature ALD is characterized by synchrotron-based grazing-incidence wide-angle x-ray scattering and high-resolution transmission electron microscopy. In addition, we demonstrate the feasibility of using layered h-AlN as an interfacial layer between WS2 and ALD HfO2. The significantly better uniformity and smoothness of HfO2 than that directly deposited on TMD are desirable characteristics for TMD transistor applications.


  • Electrical Characteristics of Si0.8Ge0.2 p-MOSFET With TMA Pre-Doping and NH3 Plasma IL Treatment

    by Meng-Chien Lee, Nien-Ju Chung, Hung-Ru Lin, Wei-Li Lee, Yun-Yan Chung, Shin-Yuan Wang, Guang-Li Luo, Chao-Hsin Chien

    We successfully fabricated p-MOSFETs on Si 0.8 Ge 0.2 substrate using trimethylaluminum (TMA) pre-doping and NH 3 plasma as interfacial layer (IL) treatment for HfO 2 -based gate stacks. X-ray photoelectron spectroscopy (XPS) findings indicated that SiGe interface with TMA pre-doping and NH 3 plasma was free from Ge–O bonds and mainly composed of Si–N and Al–O bonds. With this IL treatment, p-MOSFET revealed an improved subthreshold swing of 98 mV/decade and a high ${I}_{ \mathrm{ON}} / {I}_{ \mathrm{OFF}}$ ratio of $6\times 10^{{6}}$ . Furthermore, the ${I}_{D}$ – ${V}_{D}$ curves of p-MOSFET showed that the driving current was enhanced from 0.5 to $1.8~\mu \text{A} / \mu \text{m}$ at ${V}_{D} = -1$ V. Therefore, the proposed scheme is a simple technique to achieve a high-quality interface on a SiGe substrate.