Kevin Brew
Kevin Brew has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Abu Sebastian
IBM Research Europe, Rüschlikon, Switzerland
3 shared publications - Athanasios Vasilopoulos
IBM Research Europe, Rüschlikon, Switzerland
3 shared publications - Manuel Le Gallo
IBM Research Europe, Rüschlikon, Switzerland
3 shared publications - Nicole Saulnier
IBM Research, Albany, NY, USA
3 shared publications - Rubab Ume
University at Albany 1 , Albany, New York 12222
3 shared publications Samuel Choi
IBM Research-Albany, Albany, NY, USA
3 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (11)
Nanoscale phase separation in Al0.4–Sb0.6 alloy for phase change memory applications
Phase change memory (PCM) is considered an enabling technology for non-volatile multilevel data storage and neuromorphic computing. Recent advancements in PCM have highlighted the need to improve resistance drift and energy efficiency. At present, binary alloys that phase-separate upon crystallization offer a promising solution. The Al–Sb binary alloy crystallizes into a rhombohedral Sb-rich phase and a cubic AlSb phase, with the latter having a higher melting temperature that enables selective melting of the Sb-rich phase for partial RESET programming. Continuum resistance states result from a reversible alloying process, in which programming pulses modulate the granularity and aluminum content of the amorphous Sb-rich phase. Al0.4–Sb0.6 PCM cells, fabricated on Si-foundry templates, exhibit a high resistance contrast of up to 4000× between fully amorphous and crystalline states, along with a low resistance drift coefficient (∼0.06). The high melting point of AlSb also leads to nanoscale compositional heterogeneity, which persists in the amorphous state, suppressing structural relaxation and thus reducing resistance drift. These findings position Al0.4–Sb0.6 as a promising material for engineering multilevel PCM cells based on phase-separating alloys.
- 1 November 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (11)
Open AccessNanoscale phase separation in Al0.4–Sb0.6 alloy for phase change memory applications
Phase change memory (PCM) is considered an enabling technology for non-volatile multilevel data storage and neuromorphic computing. Recent advancements in PCM have highlighted the need to improve resistance drift and energy efficiency. At present, binary alloys that phase-separate upon crystallization offer a promising solution. The Al–Sb binary alloy crystallizes into a rhombohedral Sb-rich phase and a cubic AlSb phase, with the latter having a higher melting temperature that enables selective melting of the Sb-rich phase for partial RESET programming. Continuum resistance states result from a reversible alloying process, in which programming pulses modulate the granularity and aluminum content of the amorphous Sb-rich phase. Al0.4–Sb0.6 PCM cells, fabricated on Si-foundry templates, exhibit a high resistance contrast of up to 4000× between fully amorphous and crystalline states, along with a low resistance drift coefficient (∼0.06). The high melting point of AlSb also leads to nanoscale compositional heterogeneity, which persists in the amorphous state, suppressing structural relaxation and thus reducing resistance drift. These findings position Al0.4–Sb0.6 as a promising material for engineering multilevel PCM cells based on phase-separating alloys.
- 1 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 13 (4) , 1052-1061
Programming Weights to Analog In-Memory Computing Cores by Direct Minimization of the Matrix-Vector Multiplication Error
Accurate programming of non-volatile memory (NVM) devices in analog in-memory computing (AIMC) cores is critical to achieve high matrix-vector multiplication (MVM) accuracy during deep learning inference workloads. In this paper, we propose a novel programming approach that directly minimizes the MVM error by performing stochastic gradient descent optimization with synthetic random input data. The MVM error is significantly reduced compared to the conventional unit-cell by unit-cell iterative programming. We demonstrate that the optimal hyperparameters in our method are agnostic to the weights being programmed, enabling large-scale deployment across multiple AIMC cores without further fine tuning. It also eliminates the need for high-resolution analog to digital converters (ADCs) to decipher the small unit-cell conductance during programming. We experimentally validate this approach by demonstrating an inference accuracy increase of 1.26% on ResNet-9. The experiments were performed using phase change memory (PCM)-based AIMC cores fabricated in 14nm CMOS technology.
- 1 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 13 (4) , 1052-1061
Programming Weights to Analog In-Memory Computing Cores by Direct Minimization of the Matrix-Vector Multiplication Error
Accurate programming of non-volatile memory (NVM) devices in analog in-memory computing (AIMC) cores is critical to achieve high matrix-vector multiplication (MVM) accuracy during deep learning inference workloads. In this paper, we propose a novel programming approach that directly minimizes the MVM error by performing stochastic gradient descent optimization with synthetic random input data. The MVM error is significantly reduced compared to the conventional unit-cell by unit-cell iterative programming. We demonstrate that the optimal hyperparameters in our method are agnostic to the weights being programmed, enabling large-scale deployment across multiple AIMC cores without further fine tuning. It also eliminates the need for high-resolution analog to digital converters (ADCs) to decipher the small unit-cell conductance during programming. We experimentally validate this approach by demonstrating an inference accuracy increase of 1.26% on ResNet-9. The experiments were performed using phase change memory (PCM)-based AIMC cores fabricated in 14nm CMOS technology.
- Open Access
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6279-6285
Exploiting the State Dependency of Conductance Variations in Memristive Devices for Accurate In-Memory Computing
Analog in-memory computing (AIMC) using memristive devices is considered a promising Non-von Neumann approach for deep learning (DL) inference tasks. However, inaccuracies in the programming of devices, that are attributed to conductance variations, pose a key challenge toward achieving sufficient compute precision for DL inference. Fortunately, conduction variations in memristive devices, such as phase-change memory (PCM) devices, exhibit a strong state dependence. This state dependence can be exploited in synaptic unit cells that comprise more than one memristive device, to encode positive or negative weights. In such multi-memristive unit cells, we propose a method that optimally maps the weights to the device conductance values, by maximizing the number of devices at the stable SET and RESET states. We demonstrate that this method reduces the matrix-vector multiplication (MVM) error and is more resilient to non-ideal device retention characteristics. With this approach, we increase the mean experimental inference accuracy of a network trained for MNIST classification by 0.71% on two PCM-based AIMC cores, and the hardware-realistic simulated top-1 accuracy of a network trained for ImageNet classification by 0.28%, while significantly reducing variability across multiple experiment instances.
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6279-6285
Open AccessExploiting the State Dependency of Conductance Variations in Memristive Devices for Accurate In-Memory Computing
Analog in-memory computing (AIMC) using memristive devices is considered a promising Non-von Neumann approach for deep learning (DL) inference tasks. However, inaccuracies in the programming of devices, that are attributed to conductance variations, pose a key challenge toward achieving sufficient compute precision for DL inference. Fortunately, conduction variations in memristive devices, such as phase-change memory (PCM) devices, exhibit a strong state dependence. This state dependence can be exploited in synaptic unit cells that comprise more than one memristive device, to encode positive or negative weights. In such multi-memristive unit cells, we propose a method that optimally maps the weights to the device conductance values, by maximizing the number of devices at the stable SET and RESET states. We demonstrate that this method reduces the matrix-vector multiplication (MVM) error and is more resilient to non-ideal device retention characteristics. With this approach, we increase the mean experimental inference accuracy of a network trained for MNIST classification by 0.71% on two PCM-based AIMC cores, and the hardware-realistic simulated top-1 accuracy of a network trained for ImageNet classification by 0.28%, while significantly reducing variability across multiple experiment instances.
- Top Cited PapersOpen Access
- 23 August 2023
- Published by Springer Nature in Nature
- Vol. 620 (7975) , 768-775
An analog-AI chip for energy-efficient speech recognition and transcription
Models of artificial intelligence (AI) that have billions of parameters can achieve high accuracy across a range of tasks1,2, but they exacerbate the poor energy efficiency of conventional general-purpose processors, such as graphics processing units or central processing units. Analog in-memory computing (analog-AI)3–7 can provide better energy efficiency by performing matrix–vector multiplications in parallel on ‘memory tiles’. However, analog-AI has yet to demonstrate software-equivalent (SWeq) accuracy on models that require many such tiles and efficient communication of neural-network activations between the tiles. Here we present an analog-AI chip that combines 35 million phase-change memory devices across 34 tiles, massively parallel inter-tile communication and analog, low-power peripheral circuitry that can achieve up to 12.4 tera-operations per second per watt (TOPS/W) chip-sustained performance. We demonstrate fully end-to-end SWeq accuracy for a small keyword-spotting network and near-SWeq accuracy on the much larger MLPerf8 recurrent neural-network transducer (RNNT), with more than 45 million weights mapped onto more than 140 million phase-change memory devices across five chips.
- 23 August 2023
- Published by Springer Nature in Nature
- Vol. 620 (7975) , 768-775
Top Cited PapersOpen AccessAn analog-AI chip for energy-efficient speech recognition and transcription
Models of artificial intelligence (AI) that have billions of parameters can achieve high accuracy across a range of tasks1,2, but they exacerbate the poor energy efficiency of conventional general-purpose processors, such as graphics processing units or central processing units. Analog in-memory computing (analog-AI)3–7 can provide better energy efficiency by performing matrix–vector multiplications in parallel on ‘memory tiles’. However, analog-AI has yet to demonstrate software-equivalent (SWeq) accuracy on models that require many such tiles and efficient communication of neural-network activations between the tiles. Here we present an analog-AI chip that combines 35 million phase-change memory devices across 34 tiles, massively parallel inter-tile communication and analog, low-power peripheral circuitry that can achieve up to 12.4 tera-operations per second per watt (TOPS/W) chip-sustained performance. We demonstrate fully end-to-end SWeq accuracy for a small keyword-spotting network and near-SWeq accuracy on the much larger MLPerf8 recurrent neural-network transducer (RNNT), with more than 45 million weights mapped onto more than 140 million phase-change memory devices across five chips.
- Top Cited Papers
- 10 August 2023
- Published by Springer Nature in Nature Electronics
- Vol. 6 (9) , 680-693
A 64-core mixed-signal in-memory compute chip based on phase-change memory for deep neural network inference
- 10 August 2023
- Published by Springer Nature in Nature Electronics
- Vol. 6 (9) , 680-693
Top Cited PapersA 64-core mixed-signal in-memory compute chip based on phase-change memory for deep neural network inference
- 8 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 36 (3) , 327-331
Yield Methodology and Heater Process Variation in Phase Change Memory (PCM) Technology for Analog Computing
We discuss inline electrical testing to monitor the baseline of Analog Computing hardware using Phase Change Memory (PCM) technology. Tightening the PCM resistance distribution is necessary to meet analog computation requirement. A new yield methodology is introduced. A study of heater process variation, which will affect the heater height and the PCM resistance, will be discussed.
- 8 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 36 (3) , 327-331
Yield Methodology and Heater Process Variation in Phase Change Memory (PCM) Technology for Analog Computing
We discuss inline electrical testing to monitor the baseline of Analog Computing hardware using Phase Change Memory (PCM) technology. Tightening the PCM resistance distribution is necessary to meet analog computation requirement. A new yield methodology is introduced. A study of heater process variation, which will affect the heater height and the PCM resistance, will be discussed.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3511-3516
Three Programming States in Bilayer Ga–Sb Phase Change Memory With AlO x Diffusion Barrier
Tellurium-free antimony-based phase change memory (PCM) alloys have attracted much attention due to their superior attributes such as fast switching speed, wide resistance window, and low drift. However, programming reproducible intermediate states in such PCM materials has been challenging. In this study, bilayer PCM cells comprised of Ga–Sb films with two different compositions separated by a 1-nm-thick AlO x diffusion barrier layer were fabricated on Si foundry templates with a Ø120-nm TiN heater and TaN top contact. The current–voltage measurements of the cells exhibit two threshold voltages, separating three stable resistance regions. These cells can be controllably switched among three resistance states, that is, the SET ( $\sim 10^{3} \ \Omega)$ , intermediate ( $\sim 10^{4} \ \Omega)$ , and RESET states ( $\sim 5\times 10^{5}\,\,\ \Omega {)}$ . The phase transitions during switching among three resistance states are discussed and correlated with the device resistance profiles. The stability of the AlO x barrier layer is investigated with transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS).
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3511-3516
Three Programming States in Bilayer Ga–Sb Phase Change Memory With AlO x Diffusion Barrier
Tellurium-free antimony-based phase change memory (PCM) alloys have attracted much attention due to their superior attributes such as fast switching speed, wide resistance window, and low drift. However, programming reproducible intermediate states in such PCM materials has been challenging. In this study, bilayer PCM cells comprised of Ga–Sb films with two different compositions separated by a 1-nm-thick AlO x diffusion barrier layer were fabricated on Si foundry templates with a Ø120-nm TiN heater and TaN top contact. The current–voltage measurements of the cells exhibit two threshold voltages, separating three stable resistance regions. These cells can be controllably switched among three resistance states, that is, the SET ( $\sim 10^{3} \ \Omega)$ , intermediate ( $\sim 10^{4} \ \Omega)$ , and RESET states ( $\sim 5\times 10^{5}\,\,\ \Omega {)}$ . The phase transitions during switching among three resistance states are discussed and correlated with the device resistance profiles. The stability of the AlO x barrier layer is investigated with transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS).
- Open Access
- 18 July 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (3)
Electrical and structural properties of binary Ga–Sb phase change memory alloys
Material properties of Ga–Sb binary alloy thin films deposited under ultra-high vacuum conditions were studied for analog phase change memory (PCM) applications. Crystallization of this alloy was shown to occur in the temperature range of 180–264 °C, with activation energy >2.5 eV depending on the composition. X-ray diffraction (XRD) studies showed phase separation upon crystallization into two phases, Ga-doped A7 antimony and cubic zinc-blende GaSb. Synchrotron in situ XRD analysis revealed that crystallization into the A7 phase is accompanied by Ga out-diffusion from the grains. X-ray absorption fine structure studies of the local structure of these alloys demonstrated a bond length decrease with a stable coordination number of 4 upon amorphous-to-crystalline phase transformation. Mushroom cell structures built with Ga–Sb alloys on ø110 nm TiN heater show a phase change material resistance switching behavior with resistance ratio >100 under electrical pulse measurements. TEM and Energy Dispersive Spectroscopy (EDS) studies of the Ga–Sb cells after ∼100 switching cycles revealed that partial SET or intermediate resistance states are attained by the variation of the grain size of the material as well as the Ga content in the A7 phase. A mechanism for a reversible composition control is proposed for analog cell performance. These results indicate that Te-free Ga–Sb binary alloys are potential candidates for analog PCM applications.
- 18 July 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (3)
Open AccessElectrical and structural properties of binary Ga–Sb phase change memory alloys
Material properties of Ga–Sb binary alloy thin films deposited under ultra-high vacuum conditions were studied for analog phase change memory (PCM) applications. Crystallization of this alloy was shown to occur in the temperature range of 180–264 °C, with activation energy >2.5 eV depending on the composition. X-ray diffraction (XRD) studies showed phase separation upon crystallization into two phases, Ga-doped A7 antimony and cubic zinc-blende GaSb. Synchrotron in situ XRD analysis revealed that crystallization into the A7 phase is accompanied by Ga out-diffusion from the grains. X-ray absorption fine structure studies of the local structure of these alloys demonstrated a bond length decrease with a stable coordination number of 4 upon amorphous-to-crystalline phase transformation. Mushroom cell structures built with Ga–Sb alloys on ø110 nm TiN heater show a phase change material resistance switching behavior with resistance ratio >100 under electrical pulse measurements. TEM and Energy Dispersive Spectroscopy (EDS) studies of the Ga–Sb cells after ∼100 switching cycles revealed that partial SET or intermediate resistance states are attained by the variation of the grain size of the material as well as the Ga content in the A7 phase. A mechanism for a reversible composition control is proposed for analog cell performance. These results indicate that Te-free Ga–Sb binary alloys are potential candidates for analog PCM applications.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 35.3.1-35.3.4
External Resistance Reduction by Nanosecond Laser Anneal in Si/SiGe CMOS Technology
We report on a significant pFET external resistance reduction (~40%) and corresponding 10% R ON decrease by nanosecond laser annealing of S/D structures applicable to advanced technology nodes. Selective melting of pFET S/D elements is responsible for this improvement. Process window boundaries are defined by channel and junction melting at the upper end and by S/D SiGe melting at the lower end. Short channel characteristics are not degraded within the identified process window. Contacted gate pitch (CPP) and fin number dependence of the process window is assessed.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 35.3.1-35.3.4
External Resistance Reduction by Nanosecond Laser Anneal in Si/SiGe CMOS Technology
We report on a significant pFET external resistance reduction (~40%) and corresponding 10% R ON decrease by nanosecond laser annealing of S/D structures applicable to advanced technology nodes. Selective melting of pFET S/D elements is responsible for this improvement. Process window boundaries are defined by channel and junction melting at the upper end and by S/D SiGe melting at the lower end. Short channel characteristics are not degraded within the identified process window. Contacted gate pitch (CPP) and fin number dependence of the process window is assessed.
- 3 May 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 121 (17) , 174501
Analysis of loss mechanisms in Ag2ZnSnSe4 Schottky barrier photovoltaics
Recently, a new type of photovoltaic device based on an n-type Ag2ZnSnSe4 (AZTSe) absorber was demonstrated with an efficiency of over 5%. This work examines in detail several critical loss mechanisms in FTO/AZTSe/MoO3/ITO Schottky barrier devices. It is shown that the Schottky barrier height in the present devices under illumination is only ∼0.82 eV. With a barrier height of this magnitude, the device has an upper-bound of only 6.4% to the efficiency. Second, the AZTSe thin films used in the present devices exhibit exceptionally short minority carrier lifetimes (≤225 ps), as probed using two-photon spectroscopy. Third, hysteresis is observed in the J–V response of these devices. Pulsed electrical measurements reveal that reverse-bias voltage pulses create residual shunts in the device proportional to the pulse amplitude and duration. Reversible Ag-doping of the MoO3 buffer is proposed as an explanation of the observed shunting upon reverse bias. Therefore, improving the contact materials and the minority carrier lifetime is identified to be critically important for improving AZTSe-based photovoltaics. Finally, AZTSe is found to be photo-conductive with a Hall carrier density that increases by two orders of magnitude upon illumination. The origin of this effect is still unknown.
- 3 May 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 121 (17) , 174501
Analysis of loss mechanisms in Ag2ZnSnSe4 Schottky barrier photovoltaics
Recently, a new type of photovoltaic device based on an n-type Ag2ZnSnSe4 (AZTSe) absorber was demonstrated with an efficiency of over 5%. This work examines in detail several critical loss mechanisms in FTO/AZTSe/MoO3/ITO Schottky barrier devices. It is shown that the Schottky barrier height in the present devices under illumination is only ∼0.82 eV. With a barrier height of this magnitude, the device has an upper-bound of only 6.4% to the efficiency. Second, the AZTSe thin films used in the present devices exhibit exceptionally short minority carrier lifetimes (≤225 ps), as probed using two-photon spectroscopy. Third, hysteresis is observed in the J–V response of these devices. Pulsed electrical measurements reveal that reverse-bias voltage pulses create residual shunts in the device proportional to the pulse amplitude and duration. Reversible Ag-doping of the MoO3 buffer is proposed as an explanation of the observed shunting upon reverse bias. Therefore, improving the contact materials and the minority carrier lifetime is identified to be critically important for improving AZTSe-based photovoltaics. Finally, AZTSe is found to be photo-conductive with a Hall carrier density that increases by two orders of magnitude upon illumination. The origin of this effect is still unknown.