Wonsub Lim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wonsub Lim has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- John D. Cressler
Georgia Institute of Technology
4 shared publications - Arya Moradinia
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
3 shared publications - Yaw A. Mensah
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
3 shared publications - Moon-Kyu Cho
School of Computer Engineering, Korea National University of Transportation, Chungju-si, Chungcheongbuk-do, Republic of Korea
2 shared publications - Adilson S. Cardoso
Raytheon, Atlanta, GA, USA
1 shared publication - Christopher T. Coen
GTRI Advanced Concepts Laboratory, Atlanta, GA, USA
1 shared publication
Latest Publications
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 6, 117-120
A 110–145-GHz SiGe HBT D-Band Vector Modulator Phase Shifter Utilizing Differential Quadrature Delay Lines
This paper presents a 4-bit D-band SiGe vector modulator phase shifter (VMPS). A novel transmission line-based delay line topology is used to generate differential quadrature signals that are weighted by 4 VGAs and cascaded with a buffer amplifier, achieving wide bandwidth, moderate gain, and low power consumption. The VMPS achieves 1.5 dB peak average gain with a 3-dB bandwidth from 110 -145 GHz. The peak RMS amplitude and phase errors are 1.2 dB and 8.5∘, respectively, and the circuit consumes 20.3 mW of average DC power from a 1.5 V supply. To the authors best knowledge, the presented D-Band vector modulator phase shifter achieves the widest fractional bandwidth of any mm-Wave vector modulator phase shifter implemented in silicon.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 6, 117-120
A 110–145-GHz SiGe HBT D-Band Vector Modulator Phase Shifter Utilizing Differential Quadrature Delay Lines
This paper presents a 4-bit D-band SiGe vector modulator phase shifter (VMPS). A novel transmission line-based delay line topology is used to generate differential quadrature signals that are weighted by 4 VGAs and cascaded with a buffer amplifier, achieving wide bandwidth, moderate gain, and low power consumption. The VMPS achieves 1.5 dB peak average gain with a 3-dB bandwidth from 110 -145 GHz. The peak RMS amplitude and phase errors are 1.2 dB and 8.5∘, respectively, and the circuit consumes 20.3 mW of average DC power from a 1.5 V supply. To the authors best knowledge, the presented D-Band vector modulator phase shifter achieves the widest fractional bandwidth of any mm-Wave vector modulator phase shifter implemented in silicon.
- 9 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (3) , 744-748
Design Methodology for a Wideband, Low Insertion Loss, Digital Step Attenuator in SiGe BiCMOS Technology
This brief presents a wideband, low insertion loss, high attenuation range digital step attenuator (DSA) implemented using SiGe HBTs. In a switched-type topology, the off-state capacitances ( $\text{C}_{OFF}$ ) in both reference and attenuation states cause different poles and zeros, which trigger amplitude and phase errors and limit the operating bandwidth. To achieve wide bandwidth, methods to relocate poles and zeros to the highest possible frequencies in both states are investigated. In the reference state, minimizing the size of the shunt switching transistors extends the bandwidth. In the attenuation state, switching in a capacitor at the base of an anti-parallel (AP) SiGe HBT pair series switch reduces the effective $\text{C}_{OFF}$ , enhancing the bandwidth. The proposed techniques facilitate the realization of a 16-dB attenuator cell to support wide bandwidth and offer lower insertion loss than conventional cascaded 8-dB cell designs. Fabricated in 130-nm SiGe BiCMOS technology, the proposed DSA with an attenuation range of 31.5 dB in 0.5 dB steps operates from DC to 67 GHz and achieves an insertion loss lower than 7.8 dB. The RMS amplitude error is less than 0.4 dB above 1 GHz, while the RMS phase variation is less than 13.1°.
- 9 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (3) , 744-748
Design Methodology for a Wideband, Low Insertion Loss, Digital Step Attenuator in SiGe BiCMOS Technology
This brief presents a wideband, low insertion loss, high attenuation range digital step attenuator (DSA) implemented using SiGe HBTs. In a switched-type topology, the off-state capacitances ( $\text{C}_{OFF}$ ) in both reference and attenuation states cause different poles and zeros, which trigger amplitude and phase errors and limit the operating bandwidth. To achieve wide bandwidth, methods to relocate poles and zeros to the highest possible frequencies in both states are investigated. In the reference state, minimizing the size of the shunt switching transistors extends the bandwidth. In the attenuation state, switching in a capacitor at the base of an anti-parallel (AP) SiGe HBT pair series switch reduces the effective $\text{C}_{OFF}$ , enhancing the bandwidth. The proposed techniques facilitate the realization of a 16-dB attenuator cell to support wide bandwidth and offer lower insertion loss than conventional cascaded 8-dB cell designs. Fabricated in 130-nm SiGe BiCMOS technology, the proposed DSA with an attenuation range of 31.5 dB in 0.5 dB steps operates from DC to 67 GHz and achieves an insertion loss lower than 7.8 dB. The RMS amplitude error is less than 0.4 dB above 1 GHz, while the RMS phase variation is less than 13.1°.