Arya Moradinia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arya Moradinia has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- John D. Cressler
Georgia Institute of Technology
5 shared publications - Yaw A. Mensah
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
4 shared publications - Wonsub Lim
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
3 shared publications - Brett L. Ringel
Georgia Institute of Technology
1 shared publication Cheng-Gang Zhuang
Department of Research and Development, Corning Inc., Corning, NY, USA
1 shared publicationCheolbok Kim
Department of Research and Development, Corning Inc., Corning, NY, USA
1 shared publication
Latest Publications
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1320-1323
A 2.2–82-GHz Ultrabroadband Wilkinson Power Divider Using a Multisection Folded Inductor in 130-nm SiGe BiCMOS
An ultrabroadband Wilkinson power divider employing a single-folded inductor is presented. Unlike conventional designs with discrete inductors, this work utilizes a multisection topology with a symmetric inductor that leverages mutual inductance to significantly extend the fractional bandwidth (FBW). The divider achieves over 10-dB return loss and isolation across 2.2–82 GHz, corresponding to a 190% FBW. Plus, custom-designed metal-oxide–metal (MOM) shunt capacitors and resistors are embedded at the crossing section of the inductor paths to reduce parasitic inductance and additional loss, achieving 2.2-dB insertion loss at 80 GHz. Furthermore, the measured amplitude and phase imbalances are under 0.1 dB and 0.3°, respectively, due to a novel electrical length compensation technique. To the best of the authors’ knowledge, this design offers the widest FBW reported to date among Wilkinson power dividers.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (12) , 1371-1374
A 50-GHz SiGe Frequency Quadrupler With 42-dBc Harmonic Rejection and 17% Peak Total Efficiency
This letter introduces a highly efficient 50-GHz SiGe frequency quadrupler with exceptional harmonic rejection capabilities. Utilizing a design comprised of two consecutive doublers, it features a truly symmetric transformer balun with LC matching topology and ensures maximal rejection of odd harmonics with high total efficiency. The transformer balun achieves remarkably a low amplitude imbalance of 0.03 dB and a phase imbalance of 0.3 $^{\circ}$ within the 3-dB fractional bandwidth from 48 to 52 GHz and exhibits a minimum harmonic rejection ratio (HRR) of 42 dBc from the fundamental to the seventh harmonic. The device delivers a peak output power of 5.4 dBm at an input power of 1 dBm, maintaining a high peak total efficiency of 17%. According to the best of authors’ knowledge, this represents the highest HRR and total efficiency found to date among all E-, U-, V-, and W-band frequency quadruplers.
- 25 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (10) , 1415-1418
Ultralow-Loss Substrate-Integrated Waveguides in Alumina Ribbon Ceramic Substrates for 75–170 GHz Wireless Applications
This letter reports, for the first time, the ultralow insertion loss (IL) of substrate-integrated waveguides (SIWs) in alumina ribbon ceramic (ARC) substrate, a newly developed material technology at Corning Inc., for millimeter-wave (mm-wave) packaging applications. Demonstrated on an 80- $\mu$ m-thick ARC substrate using a semi-additive patterning (SAP) process, SIWs are fed by broadband microstrip taper transitions and characterized based on conductor-backed coplanar waveguide (CBCPW)-to-microstrip transitions and microstrip feedlines in 75–110 GHz (W-band) and 110–170 GHz (D-band), respectively. Using two-tier calibration, the average measured IL of ARC-based SIWs in W-and D-bands is extracted to be $0.13$ $ \pm$ $ 0.02$ and $0.155$ $\pm$ $ 0.01$ dB/mm, respectively, showing an excellent agreement with simulated and theoretical modeling results. According to comparisons, SIWs on ARC outperform those on other substrates in terms of IL over 75–170 GHz, exhibit excellent performance, and provide easier fabrication as compared to air-filled SIWs. These first results reveal the potential of ARC substrates for the development of ultrathin, high-performance passive components and modules based on SIW technology in mm-wave frequency ranges.
- 25 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (10) , 1415-1418
Ultralow-Loss Substrate-Integrated Waveguides in Alumina Ribbon Ceramic Substrates for 75–170 GHz Wireless Applications
This letter reports, for the first time, the ultralow insertion loss (IL) of substrate-integrated waveguides (SIWs) in alumina ribbon ceramic (ARC) substrate, a newly developed material technology at Corning Inc., for millimeter-wave (mm-wave) packaging applications. Demonstrated on an 80- $\mu$ m-thick ARC substrate using a semi-additive patterning (SAP) process, SIWs are fed by broadband microstrip taper transitions and characterized based on conductor-backed coplanar waveguide (CBCPW)-to-microstrip transitions and microstrip feedlines in 75–110 GHz (W-band) and 110–170 GHz (D-band), respectively. Using two-tier calibration, the average measured IL of ARC-based SIWs in W-and D-bands is extracted to be $0.13$ $ \pm$ $ 0.02$ and $0.155$ $\pm$ $ 0.01$ dB/mm, respectively, showing an excellent agreement with simulated and theoretical modeling results. According to comparisons, SIWs on ARC outperform those on other substrates in terms of IL over 75–170 GHz, exhibit excellent performance, and provide easier fabrication as compared to air-filled SIWs. These first results reveal the potential of ARC substrates for the development of ultrathin, high-performance passive components and modules based on SIW technology in mm-wave frequency ranges.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 6, 117-120
A 110–145-GHz SiGe HBT D-Band Vector Modulator Phase Shifter Utilizing Differential Quadrature Delay Lines
This paper presents a 4-bit D-band SiGe vector modulator phase shifter (VMPS). A novel transmission line-based delay line topology is used to generate differential quadrature signals that are weighted by 4 VGAs and cascaded with a buffer amplifier, achieving wide bandwidth, moderate gain, and low power consumption. The VMPS achieves 1.5 dB peak average gain with a 3-dB bandwidth from 110 -145 GHz. The peak RMS amplitude and phase errors are 1.2 dB and 8.5∘, respectively, and the circuit consumes 20.3 mW of average DC power from a 1.5 V supply. To the authors best knowledge, the presented D-Band vector modulator phase shifter achieves the widest fractional bandwidth of any mm-Wave vector modulator phase shifter implemented in silicon.
- 17 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 6, 117-120
A 110–145-GHz SiGe HBT D-Band Vector Modulator Phase Shifter Utilizing Differential Quadrature Delay Lines
This paper presents a 4-bit D-band SiGe vector modulator phase shifter (VMPS). A novel transmission line-based delay line topology is used to generate differential quadrature signals that are weighted by 4 VGAs and cascaded with a buffer amplifier, achieving wide bandwidth, moderate gain, and low power consumption. The VMPS achieves 1.5 dB peak average gain with a 3-dB bandwidth from 110 -145 GHz. The peak RMS amplitude and phase errors are 1.2 dB and 8.5∘, respectively, and the circuit consumes 20.3 mW of average DC power from a 1.5 V supply. To the authors best knowledge, the presented D-Band vector modulator phase shifter achieves the widest fractional bandwidth of any mm-Wave vector modulator phase shifter implemented in silicon.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 707-710
A SiGe HBT D-Band LNA Utilizing Asymmetric Broadside Coupled Lines
This letter presents a D-band low noise amplifier (LNA) implemented in 90 nm SiGe BiCMOS technology and is intended for next-generation communications systems. The LNA is a five-stage staggered common-emitter and cascode design used to simultaneously achieve wide bandwidth and high gain. The LNA utilizes asymmetric broadside coupled lines as interstage impedance transformers to achieve a wideband gain response while constraining power consumption. The presented LNA achieves an in-band gain of 26.5 dB and a bandwidth of 37.6 GHz. The minimum measured NF is 7.2 dB, and the dc power consumption is 20.6 mW. This D-band LNA achieves high gain, wide bandwidth, and low power consumption, resulting in a competitive performance with other D-band LNAs in the literature. The die area of the fabricated LNA is 0.8 $\times$ 0.86 mm $^{2}$ , including pads.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 707-710
A SiGe HBT D-Band LNA Utilizing Asymmetric Broadside Coupled Lines
This letter presents a D-band low noise amplifier (LNA) implemented in 90 nm SiGe BiCMOS technology and is intended for next-generation communications systems. The LNA is a five-stage staggered common-emitter and cascode design used to simultaneously achieve wide bandwidth and high gain. The LNA utilizes asymmetric broadside coupled lines as interstage impedance transformers to achieve a wideband gain response while constraining power consumption. The presented LNA achieves an in-band gain of 26.5 dB and a bandwidth of 37.6 GHz. The minimum measured NF is 7.2 dB, and the dc power consumption is 20.6 mW. This D-band LNA achieves high gain, wide bandwidth, and low power consumption, resulting in a competitive performance with other D-band LNAs in the literature. The die area of the fabricated LNA is 0.8 $\times$ 0.86 mm $^{2}$ , including pads.
- 22 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 731-734
A 117–155-GHz SiGe HBT D-Band Subharmonic Mixer Utilizing a Novel 180° Hybrid Coupler
This letter presents a D -band subharmonic downconversion mixer for next-generation communications and implemented in a 90-nm SiGe BiCMOS technology. The design consists of a cascoded push–push doubler and a wideband transimpedance amplifier (TIA), and it utilizes a novel, 180 $^{\circ}$ hybrid coupler topology to achieve wide bandwidth, moderate conversion gain (CG), and power consumption. The subharmonic mixer achieves a peak in-band gain of 5.1 dB and a bandwidth of 38 GHz at a center frequency of 136 GHz. The subharmonic mixer utilizes a fixed local oscillator (LO) of 2 dBm at 57.5 GHz and consumes 50.8 mW of dc power. The core die area of the subharmonic mixer is 0.9 $\times$ 0.5 mm $^{2}$ . This mixer achieves highly competitive performance in terms of CG, bandwidth, and power consumption with respect to D -band subharmonic mixers demonstrated in silicon.
- 22 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (6) , 731-734
A 117–155-GHz SiGe HBT D-Band Subharmonic Mixer Utilizing a Novel 180° Hybrid Coupler
This letter presents a D -band subharmonic downconversion mixer for next-generation communications and implemented in a 90-nm SiGe BiCMOS technology. The design consists of a cascoded push–push doubler and a wideband transimpedance amplifier (TIA), and it utilizes a novel, 180 $^{\circ}$ hybrid coupler topology to achieve wide bandwidth, moderate conversion gain (CG), and power consumption. The subharmonic mixer achieves a peak in-band gain of 5.1 dB and a bandwidth of 38 GHz at a center frequency of 136 GHz. The subharmonic mixer utilizes a fixed local oscillator (LO) of 2 dBm at 57.5 GHz and consumes 50.8 mW of dc power. The core die area of the subharmonic mixer is 0.9 $\times$ 0.5 mm $^{2}$ . This mixer achieves highly competitive performance in terms of CG, bandwidth, and power consumption with respect to D -band subharmonic mixers demonstrated in silicon.