WAWashim Reza Ali

Washim Reza Ali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Washim Reza Ali has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wafer-scale integration of piezo- and ferroelectric Al 0.64 Sc 0.36 N thin films by reactive sputtering

    by Sanjay Nayak, Venkata Raveendra Nallagatla, Ravindra Singh Bisht, Dmytro Solonenko, Demian Henzen, Washim Reza Ali, Carla Maria Lazzari, Robert Jw Frost, Andrea Serafini, Davide Codegoni, et al.

    Large-area deposition of aluminum-scandium-nitride (Al 1 −x Sc x N) thin films with higher Sc content ( x ) remains challenging due to several issues, such as abnormal orientation growth, stress control, and the undesired crystal phase. These anomalies across the wafer hinder the development of high scandium-content AlScN films, which are critical for microelectromechanical systems (MEMS) applications. In this study, we report on the sputter deposition of Al 0.64 Sc 0.36 N thin films from a 304 mm diameter Al 0.64 Sc 0.36 alloy target on 200 mm Si (100) wafers, achieving an exceptionally high deposition rate of 8.7 μ m h −1 with less than 1% abnormally oriented grains and controllable stress tuning. Comprehensive microstructural and electrical characterizations confirm the superior growth of high-quality Al 0.64 Sc 0.36 N films with exceptional wafer-averaged piezoelectric coefficients ( d 33 ,f = 15.62 pm V −1 and e 31 ,f = −2.9 C m −2 ) due to low point defects density and grain mosaicity. This is accomplished through the implementation of an optimized seed layer and a refined electrode integration strategy, along with optimal process conditions. The wafer yield and device failure rates are analyzed and correlated with the average stress of the films and their stress profiles along the diameter. The resulting films demonstrate excellent uniformity in structural, compositional, and piezoelectric properties across the entire 200 mm wafer, underscoring their strong potential for next-generation MEMS applications.

  • 200 mm wafer-scale integration of bilayer wurtzite ferroelectric AlScN exhibiting effective d33,f > 26.8 pm/V and e31,f > 4.6 C/m2

    by Sanjay Nayak, Andrea Picco, Adrien Piot, Washim Reza Ali, Venkata Raveendra Nallagatla, Ravindra Singh Bisht, Dmytro Solonenko, Demian Henzen, Carla Maria Lazzari, Andrea Serafini, et al.

    We report the successful integration of a bilayer ferroelectric aluminum–scandium–nitride (Al0.64Sc0.36N) thin film on an industrial-scale 200 mm silicon (100) wafer. Microstructural analysis revealed that both the bottom and top Al0.64Sc0.36N layers exhibit comparable characteristics. Wafer-scale ferroelectric and piezoelectric characterization of the individual layers showed similar average values for permittivity (ɛ), loss tangent (tan δ), and piezoelectric coefficients (d33,f and e31,f). Findings suggest that the bottom Al0.64Sc0.36N layer has a lower leakage current than the top layer in the bilayer configuration. We present a strategy for efficiently actuating both the top and bottom layers to generate a high equivalent longitudinal strain and transverse stress without requiring any complex or additional electrical circuitry. Upon excitation, the bilayer structure yields equivalent d33,f and e31,f values of >26.8 pm/V and >4.6 C/m2, respectively, among the highest ever reported within bilayers of complementary metal–oxide–semiconductor (CMOS) compatible ferroelectric nitride thin films. Such high piezoelectric coefficients enable the broader adoption of lead-free ferroelectric materials for actuator applications.


  • MEMS Acoustic Sensor for Low Frequency Applications

    by Washim Reza Ali, Anshuman Raunak, Ashish Kumar, Mahanth Prasad


  • Platform Development for CMOS-MEMS Multi-Gap Capacitive Transducers

    by Hung-Yu Chen, Po-I Shih, Washim Reza Ali, Ming-Huang Li, Sheng-Shian Li

    This work, for the first time, presents a platform for designing microelectromechanical system (MEMS) capacitive transducers featuring multiple transduction gaps implemented by a traditional 0.18 $\mu$ m 1-Poly-6-Metal (1P6M) complementary metal-oxide-semiconductor (CMOS) technology. As a capacitive transducer, different sizes of the transduction gap will bring distinct pros and cons, and designers often need to make trade-off among various performance metrics. The proposed CMOS-MEMS platform provides three types of transduction gap spacing that cover from narrow to large in single chip with excellent circuit integration capability. Based on a partial etching technique applied on back-end-of-line (BEOL) metal layers while utilizing anti-reflective coating (titanium nitride, TiN) as electrodes, transduction gap spacing of 125 nm, 400 nm, and 930 nm can be fabricated simultaneously without damaging the integrated circuit. Among these three devices, the latest metal-insulator-metal (MIM) device, which features a 125 nm transduction gap and provides a record-low motional resistance, is introduced with detail design guideline and layout tutorial for the first time. The post-CMOS fabrication process of the multi-gap platform is validated using three simple clamped-clamped beam structures being verified as capacitive resonators with similar frequency for extracting their mechanical and electromechanical coupling characteristics. Finally, a dual-gap capacitive micromachined ultrasonic transducer (CMUT) array is illustrated as a feasible application of the proposed platform offering different transduction gaps for signal transmission and reception. 2023-0073


  • Design and Modeling of Piezoelectric-AlN-based Acoustic Sensor for Sound Pressure Level Measurements

    by W. R. Ali, Aditi, M. Prasad

    This paper illustrates the design of a piezoelectric acoustic sensor based on AlN to be used for aero-acoustic measurements. A significant prerequisite for such sensors is a large sound pressure level (SPL) and flat frequency response in the auditory band (20 Hz to 20 kHz). That is why this sensor has been designed to measure upto an SPL of 180 dB. The design of the device has been achieved through the MEMS-CAD tool Coventorware. The Si-diaphragm thickness has been optimized for the desired SPL range using Coventorware for three different sizes of the device, namely 1.5 mm × 1.5 mm, 1.75 mm × 1.75 mm and 2 mm × 2 mm. The cavity developed after the diaphragm formation is connected to the exterior environment through a microchannel. The microchannel was designed for low cut-off frequency. The complete frequency response of all the three sensor structures has been determined. Moreover, a comparison has been drawn among the three devices in terms of parameters such as low cut-off frequency, resonance frequency, and sensitivity to find the optimized device size. The low cut-off frequency, resonance frequency, and flat band sensitivity of the optimized device are 35 Hz, 83 kHz, and 170 µV/Pa, respectively. In addition to this, a proposed fabrication process flow of the device has been presented.


  • Piezoelectric Based MEMS Acoustic Sensor for Wide Frequency Applications

    by Washim Reza Ali, Mahanth Prasad

    This work describes the development of an acoustic sensor based on piezoelectric ZnO thin film to be utilized for aero-acoustic measurements. The design of the device was carried out through CAD tool Coventorware . The backside of the device consists of the microtunnel and diaphragm structures. The Si -diaphragm thickness of the device was optimized for high sound pressure level (SPL) (upto 180 dB ) using Coventorware . A microtunnel connects the cavity, created after diaphragm formation to the outside environment. The designed device has been fabricated using standard Si -fabrication technology. Microtunnel and diaphragm structures have been fabricated in a single step using wet etching technique which results in reduced cost as well as fewer number of process steps and increased yield of the device. The front side consists of a piezoelectric sensing layer of ZnO sandwiched between two sputter deposited electrode layers of Au covered with PECVD oxide on a thermally oxidized Si -diaphragm. The low cut-off frequency, bandwidth, resonance frequency and flat band sensitivity of the device have been found to be 35.2 Hz , 15 kHz, 78 kHz and 136.5 $\pmb \mu $ V/Pa respectively. The fabricated device can be used for the SPL measurement in aircrafts, aerospace and similar applications.