DKDaniel Krüger

Daniel Krüger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Daniel Krüger has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Portable Wideband CMOS NMR Spectrometer for Multinuclear Molecular Fingerprinting

    by Aoyang Zhang, Daniel Krüger, Behdad Aghelnejad, Guang Yang, Henry Hinton, Yi-Qiao Song, Donhee Ham

    We present a small wideband CMOS nuclear magnetic resonance (NMR) spectrometer capable of multinuclear molecular fingerprinting (molecular structure determination). The spectrometer combines a small permanent magnet and a wideband digitally assisted CMOS radio frequency (RF) transceiver integrated circuit (IC) that operates in the RF frequency range from 1 to 100 MHz. This small, thus broadly deployable, NMR system can find applications in online, on-site, or on-demand multinuclear molecular fingerprinting. Concretely, the wideband spectrometer performs NMR spectroscopy with nuclear spins from $^{1}$ H, $^{19}$ F, and $^{2}$ H with a spectral resolution down to 0.07 ppm to determine structures of molecules containing these nuclear spins; it can also perform NMR with the nuclear overhauser effect (NOE), which is an important modality that further enhances the capability for molecular fingerprinting (we demonstrate the NOE by reading the $^{19}$ F NMR signal that is enhanced via heteronuclear magnetization transfer from $^{1}$ H spins). The wideband operation of the CMOS RF transceiver IC is made possible by integrating a delay-locked loop (DLL) with a broad locking range. The RF receiver (RX) part of the IC achieves an input-referred noise less than 1.2 nV/ $\surd $ Hz across the entire bandwidth of 1–100 MHz, while the RF transmitter (TX) part employs a digital power amplifier.


  • Open Access

    CMOS Integrated Circuits for the Quantum Information Sciences

    by Jens Anders, Masoud Babaie, Joseph C. Bardin, Imran Bashir, Gérard Billiot, Elena Blokhina, Shai Bonen, Edoardo Charbon, John Chiaverini, Isaac L. Chuang, et al.

    Over the past decade, significant progress in quantum technologies has been made and, hence, engineering of these systems has become an important research area. Many researchers have become interested in studying ways in which classical integrated circuits can be used to complement quantum mechanical systems, enabling more compact, performant, and/or extensible systems than would be otherwise feasible. In this article—written by a consortium of early contributors to the field—we provide a review of some of the early integrated circuits for the quantum information sciences. CMOS and BiCMOS integrated circuits for nuclear magnetic resonance, nitrogen-vacancy-based magnetometry, trapped-ion-based quantum computing, superconductor-based quantum computing, and quantum-dot based quantum computing are described. In each case, the basic technological requirements are presented before describing proof-of-concept integrated circuits. We conclude by summarizing some of the many open research areas in the quantum information sciences for CMOS designers.


  • A Portable Chip-Based NMR Relaxometry System With Arbitrary Phase Control for Point-of-Care Blood Analysis

    by Frederik Dreyer, Qing Yang, Belal Alnajjar, Daniel Krüger, Bernhard Blümich, Jens Anders

    In this paper, we present a portable NMR relaxometry system optimized for the point-of-care analysis of body liquids such as blood. The presented system is centered on an NMR-on-a-chip transceiver ASIC, a reference frequency generator with arbitrary phase control, and a custom-designed miniaturized NMR magnet with a field strength of 0.29 T and a total weight of 330 g. The NMR-ASIC co-integrates a low-IF receiver, a power amplifier, and a PLL-based frequency synthesizer on a total chip area of 1100 $\bm {\times }$ 900 $\mu$ m $\bm {^{2}}$ . The arbitrary reference frequency generator enables the use of conventional CPMG and inversion sequences, as well as modified water-suppression sequences. Moreover, it is used to implement an automatic frequency lock to correct temperature-induced magnetic field drifts. Proof-of-concept measurements on NMR phantoms and human blood samples show an excellent concentration sensitivity of v $\bm {_\rm{c,min}}$ = 2.2 mM/ $\bm {\sqrt{\rm{Hz}}}$ . This very good performance renders the presented system an ideal candidate for the future NMR-based point-of-care detection of biomarkers such as the blood glucose concentration.


  • A 5–780-MHz Transceiver ASIC for Multinuclear NMR Spectroscopy in 0.13-μm BiCMOS

    by Frederik Dreyer, Daniel Krüger, Sander Baas, Aldrik Velders, Jens Anders

    In this paper, we present a broadband (5-780 MHz) transceiver ASIC optimized for $^{\bm{1}}$ H and X-nuclei nuclear magnetic resonance (NMR) with external custom-designed microcoils. The NMR-on-a-chip transceiver is realized in a 0.13 $\mu$ m BiCMOS technology, consumes an area of 1100 $\bm{\times}$ 900 $\mu$ m $\bm{^2}$ , and integrates a quadrature receiver, consisting of a low-noise amplifier, a quadrature downconversion mixer, and intermediate-frequency variable gain amplifiers, a power amplifier, and a frequency synthesizer on a single chip. An extensive noise analysis of the BJT-based low-noise amplifier with regard to the optimum source impedance provides simplified expressions for an optimized LNA design for broadband NMR-on-a-chip applications. The NMR-on-chip transceiver provides a measured state-of-the-art input-referred voltage noise of 610 pV/ $\sqrt{\text{Hz}}$ and a maximum RX gain of 66 dB. In combination with an external, custom-designed solenoidal microcoil, the presented NMR-on-a-chip transceiver achieves a state-of-the-art normalized $^{\bm{1}}$ H spin sensitivity of 7.2 $\bm{\times}$ 10 $^{\bm{17}}$ spins $/\sqrt{\text{Hz}}\cdot\text{T}^{\bm{2}}/$ m with an untuned, i.e. broadband front-end. Proof of concept NMR experiments on multiple nuclei ( $^{\bm{1}}$ H, $^{\bm{2}}$ H, $^{\bm{13}}$ C, and $^{\bm{19}}$ F) verify the applicability of the proposed untuned, broadband approach.


  • A Portable CMOS-Based Spin Resonance System for High-Resolution Spectroscopy and Imaging

    by Daniel Krüger, Aoyang Zhang, Behdad Aghelnejad, Henry Hinton, Victor Marrugat Arnal, Yi-Qiao Song, Yiqiao Tang, Ka-Meng Lei, Jens Anders, Donhee Ham

    Nuclear magnetic resonance (NMR) is a paramount analytical tool for chemistry, biology, medicine, and geology, and has a fundamental importance in physics. The recent years have seen a wealth of efforts to miniaturize NMR systems by combining permanent magnets and CMOS radio frequency (RF)-integrated circuits (ICs) to make the benefit of NMR more broadly available beyond dedicated facilities, which have resulted in systems capable of NMR relaxometry first, and later NMR spectroscopy, the two key NMR modalities. Here we report a small NMR system comprising a digitally assisted CMOS RF transceiver IC and a 0.51-T permanent magnet, which not only enhances spectroscopy and relaxometry performance but also includes magnetic resonance imaging (MRI), a powerful variant of relaxometry. The system achieves a spectral resolution of $<$ 0.05 ppm (1.1 Hz), the highest reported in a portable CMOS-based NMR system, and an imaging resolution of $67\times 67$ $\times$ 83 $\bm{\mu}$ m $^3$ .


  • A Broadband NMR Magnetometer System With Field Searching and Automatic Tuning Function

    by Jianyu Zhao, Qing Yang, Frederik Dreyer, Daniel Kruger, Fedor Jelezko, Jens Anders

    In this paper, we present a CMOS-based broadband nuclear magnetic resonance (NMR) magnetometer system with magnetic field searching and automatic tuning capabilities. The NMR frontend consists of a custom-designed NMR transceiver ASIC and an external LC resonance circuit formed by an NMR coil and a digitally tunable capacitor (DTC). With a 1mm NMR coil, the system is designed to measure magnetic fields between 0.54 T and 2.54 T with nanotesla resolution. To this end, the system automatically sweeps its excitation frequency to acquire an NMR signal from a known sample inside the NMR coil. The measured frequency of the NMR signal, together with the known Larmor frequency of the sample, can then be used to determine the unknown magnetic field with very high precision. The presented system provides an optimum sensitivity over its entire frequency range by automatically tuning the LC resonant circuit to the current Larmor frequency using the DTC. With a 0.78 μL sample of vegetable oil, the presented NMR magnetometer achieves an excellent field resolution of 1.77 nT inside a 1.45 T benchtop MR magnet, corresponding to a relative resolution of 1.2 ppb, which is limited by the field stability of the magnet. With its intrinsic frequency noise of 15 mHz, measured using a synthetic input signal, the presented sensor can support magnetic field resolutions down to 242 pT within a 1.45 T base field.


  • An Integrator-Differentiator Transimpedance Amplifier Using Tunable Linearized High-Value Multi-Element Pseudo-Resistors

    by Matthias Haberle, Denis Djekic, Daniel Kruger, Mahdi Rajabzadeh, Maurits Ortmanns, Jens Anders

    In this paper, we present an integrator-differentiator transimpedance amplifier (I-D-TIA) with a dc compensation, which incorporates widely tunable multi-element pseudo-resistors (MEPRs) in its dc servo loop and ac signal path. The implemented MEPR in the dc path is continuously tunable from $460 \,\mathrm {k\Omega }$ to $300 \,\mathrm {G\Omega }$ allowing the TIA to process dc currents with a dynamic range of more than $100 \,\mathrm {dB}$ . The MEPR in the differentiator ac signal path provides a tunable resistance between $0.3 \,\mathrm {M\Omega }$ and $100 \,\mathrm {M\Omega }$ , resulting in an overall ac transimpedance between $3 \,\mathrm {M\Omega }$ and $1 \,\mathrm {G\Omega }$ . For the lowest ac transimpedance, a bandwidth of $10 \,\mathrm {MHz}$ is achieved. The TIA provides a minimum input-referred current noise density of $1.6\,\mathrm {fA}/\mathrm {\sqrt {Hz}}$ . The implemented MEPR has been optimized regarding its high-frequency noise by minimizing its parasitic capacitances. The MEPR shows an inherent shot noise suppression such that its noise stays close to the theoretical thermal noise limit and significantly below the theoretical shot noise limit, even for large dc currents. By using a sub-VSS supply for the MEPR, the asymmetry in its output characteristic is greatly reduced, leading to a linear signal swing of $1.5\,\mathrm {V_{pp}}$ with a THD below $1 \mathrm {\%}$ on a $1.8-\mathrm {V}$ supply. Thanks to this high linearity, large bandwidth, and high dc current dynamic range, the proposed TIA can be used in a wide variety of applications from high-sensitivity, low-bandwidth lock-in detection to transient current sensing with sub-microsecond timing resolutions.