Siti Nur Amalina Mohd Halidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Siti Nur Amalina Mohd Halidi has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Aliff Farhan Mohd Yamin
Faculty of Mechanical Engineering, Universiti Teknologi MARA Cawangan Pulau Pinang, Malaysia
2 shared publications - Hamid Yusoff
Universiti Teknologi Mara Cawangan Pulau Pinang
2 shared publications - Koay Mei Hyie
Universiti Teknologi MARA Cawangan Pulau Pinang, Permatang Pauh Campus
2 shared publications - Nor Suhada Abdullah
Universiti Teknologi Mara Cawangan Pulau Pinang
2 shared publications - Wan Mazlina Wan Mohamed
Malaysia Institute of Transport (MITRANS), Universiti Teknologi MARA, Malaysia
2 shared publications Amjad Aslam Ahmad Rosli
Universiti Teknologi MARA
1 shared publication
Latest Publications
- 19 February 2026
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 933, 93-102
Multifactorial Contributors to the Effectiveness of a Mobile Solar Dryer
The ever-increasing global population has affected food security in various ways. Dehydrating crops serve as one of the methods to preserve food and improve their shelf life. This paper discusses the various parameters that can contribute to the effectiveness of a mobile solar dryer. Parameters studied include dryer wall profile, wall colors, tray design and crop thickness. The dryer is placed in an area with ample sunlight with its temperature and humidity measured. It is found that dryer wall profile has little effect on the effectiveness while all other studied parameters affect the dryer in various ways. Light colored walls are preferred over dark colors, metal trays are best used for drying crops, and crop thickness only serves as a reference to a specific crop used depending on the customer’s needs.
- 19 February 2026
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 933, 93-102
Multifactorial Contributors to the Effectiveness of a Mobile Solar Dryer
The ever-increasing global population has affected food security in various ways. Dehydrating crops serve as one of the methods to preserve food and improve their shelf life. This paper discusses the various parameters that can contribute to the effectiveness of a mobile solar dryer. Parameters studied include dryer wall profile, wall colors, tray design and crop thickness. The dryer is placed in an area with ample sunlight with its temperature and humidity measured. It is found that dryer wall profile has little effect on the effectiveness while all other studied parameters affect the dryer in various ways. Light colored walls are preferred over dark colors, metal trays are best used for drying crops, and crop thickness only serves as a reference to a specific crop used depending on the customer’s needs.
- 5 June 2024
- Published by Springer Nature
- p. 439-443
Sample Size and Color Effects on the Performance of a Mobile Solar Dehydrator
- 5 June 2024
- Published by Springer Nature
- p. 439-443
Sample Size and Color Effects on the Performance of a Mobile Solar Dehydrator
- 1 July 2022
- Published by Springer Nature
- p. 438-442
Exploratory Temperature Comparison on Different Profiles of Polycarbonate Corrugated Sheet for Mobile Solar Dehydrator
- 1 July 2022
- Published by Springer Nature
- p. 438-442
Exploratory Temperature Comparison on Different Profiles of Polycarbonate Corrugated Sheet for Mobile Solar Dehydrator
- Open Access
- 9 April 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 93 (2) , 100-110
The Evolution of Induced Drag of Multi-Winglets for Aerodynamic Performance of NACA23015
Eagle is one of the most manoeuvrable and aerodynamically efficient bird capable of soaring for a mile, and it has high gliding ratio that can reach high velocities. Unmanned Aerial Vehicles () used in military and civilian applications are required to loiter at significant altitude without being targeted by observers. However, the induced drag is usually held mainly at the wingtip, which affects the performance of the in steady state condition due to wingtip vortex. Therefore, the objectives of this paper are to study the effect of multi-winglet on different configurations in the performance of lift and drag coefficients and to analyse the flow pattern of multi-winglet with difference configurations. The wing airfoil used was with chord length of and wingspan of . The multi-winglet device was simulated using software with three, five and seven multi-winglet configurations at angles of attack between -5° to 20° (with increment of 5°) and at flying speed of . This study found that seven multi-winglets demonstrated better results in lift and drag coefficients compared to other models at low angles of attack. In conclusion, multi-winglets can improve the aerodynamic performance of airfoil in reducing the induced drag and increasing the lift coefficient, which is suitable to be implemented at low angles of attack due to the bluffing body of winglet at high angles of attack.
- 9 April 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 93 (2) , 100-110
Open AccessThe Evolution of Induced Drag of Multi-Winglets for Aerodynamic Performance of NACA23015
Eagle is one of the most manoeuvrable and aerodynamically efficient bird capable of soaring for a mile, and it has high gliding ratio that can reach high velocities. Unmanned Aerial Vehicles () used in military and civilian applications are required to loiter at significant altitude without being targeted by observers. However, the induced drag is usually held mainly at the wingtip, which affects the performance of the in steady state condition due to wingtip vortex. Therefore, the objectives of this paper are to study the effect of multi-winglet on different configurations in the performance of lift and drag coefficients and to analyse the flow pattern of multi-winglet with difference configurations. The wing airfoil used was with chord length of and wingspan of . The multi-winglet device was simulated using software with three, five and seven multi-winglet configurations at angles of attack between -5° to 20° (with increment of 5°) and at flying speed of . This study found that seven multi-winglets demonstrated better results in lift and drag coefficients compared to other models at low angles of attack. In conclusion, multi-winglets can improve the aerodynamic performance of airfoil in reducing the induced drag and increasing the lift coefficient, which is suitable to be implemented at low angles of attack due to the bluffing body of winglet at high angles of attack.
- Open Access
- 17 January 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 91 (1) , 69-82
The Optimisation of Aerodynamic Performance Enhancement of a Flapping Wing using Response Surface Methodology
Flapping-Wing Micro Air Vehicles (FW-MAVs) are small hand-held flying vehicles that can manoeuvre in constrained space owing to their lightweight, low aspect ratio and can fly in a low Reynolds number environment. Among all wing types, flapping wings have the most potential in fulfilling this flight requirement since it offers good agility in confined spaces. However, the design problem for the flapping wings lies in lift generation and figuring out the main factors that play the biggest role in generating lift. In the present work, the effects of design parameters such as camber, velocity and frequency of the flapping wing have been investigated using the response surface methodology (RSM). The standard quadratic model of RSM called Central Composite Design (CCD) was utilized to identify and optimize the flapping wing. The experimental results were found to be in good agreement with the predicted outcomes. Out of 20 experimental trials determined by CCD, the optimum camber, velocity, and frequency were found to be 15%, 4.29 m/s and 9 Hz respectively. The experimental results in this study are reasonable and accurate and can be used for describing the aerodynamic parameters. This study also established the usefulness of RSM in optimizing the aerodynamic properties for flapping wing mechanism.
- 17 January 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 91 (1) , 69-82
Open AccessThe Optimisation of Aerodynamic Performance Enhancement of a Flapping Wing using Response Surface Methodology
Flapping-Wing Micro Air Vehicles (FW-MAVs) are small hand-held flying vehicles that can manoeuvre in constrained space owing to their lightweight, low aspect ratio and can fly in a low Reynolds number environment. Among all wing types, flapping wings have the most potential in fulfilling this flight requirement since it offers good agility in confined spaces. However, the design problem for the flapping wings lies in lift generation and figuring out the main factors that play the biggest role in generating lift. In the present work, the effects of design parameters such as camber, velocity and frequency of the flapping wing have been investigated using the response surface methodology (RSM). The standard quadratic model of RSM called Central Composite Design (CCD) was utilized to identify and optimize the flapping wing. The experimental results were found to be in good agreement with the predicted outcomes. Out of 20 experimental trials determined by CCD, the optimum camber, velocity, and frequency were found to be 15%, 4.29 m/s and 9 Hz respectively. The experimental results in this study are reasonable and accurate and can be used for describing the aerodynamic parameters. This study also established the usefulness of RSM in optimizing the aerodynamic properties for flapping wing mechanism.