IKInna Kosheva

Inna Kosheva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Inna Kosheva has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    METHODOLOGY FOR CREATING A NUMERICAL BUILDING MODEL FOR THE DEVELOPMENT OF STRUCTURAL REINFORCEMENT AND RECONSTRUCTION PROJECTS BASED ON INSPECTION

    by Oleksandr Koshevyi, Maryna Yansons, Anton Chubarev, Oleksii Rubinskyi, Mykola Yovko, Inna Kosheva

    This document presents a methodology for creating comprehensive numerical models of unfinished and damaged buildings and structures, derived from the results of their technical condition inspections. Utilizing the developed methodology and BIM technologies, the technical condition modeling of the structural frame of a nine-story building is examined. This approach facilitates the subsequent adoption of optimal design solutions for reconstruction and new construction, significantly expediting project development. The numerical models of the nine-story residential building presented herein were developed based on technical inspections of the building's structural frame, forming the foundation for projects addressing structural reinforcement and overall building reconstruction. The findings from numerical analyses of complex spatial models, along with conclusions drawn from the stress-strain state and strength characteristics of building structures based on their technical inspection, significantly enhance the potential for developing optimal design solutions. This facilitates the creation of comprehensive projects for structural reinforcement and the overall reconstruction of the building, thereby enabling the implementation of innovative developments in their construction.

  • Open Access

    NUMERICAL SIMULATION OF THE DIMENSIONAL MODEL OF THE UNDERGROUND TUNNEL UNDER DIFFERENT TYPES OF LOADS TO ASSESS ITS STRENGTH AND RIGIDITY

    by Oleksandr Koshevyi, Dmytro Levkivskyi, Maryna Yansons, Anton Chubarev, Oleksandr Marchuk, Inna Kosheva, Дмитро Левківський, Марина Янсонс, Інна Кошева

    The article presents the main ideas and opportunities for creating a comprehensive dimensional numerical model, research and analysis of the stressstrain state, strength and rigidity of a underground tunnel by using personal software based on the modified method of straight lines and CAD LIRA calculation from the effects of complex loads. This created complex model of the tunnel based on BIM technologies includes static, dynamic and temperature loads, can be used to make optimal project solutions and significantly speed up project activities. The results of the numerical research of the complex dimensional model and conclusions about the strength characteristics of the underground tunnel structures significantly expand the opportunities for making project decisions and creating promising new designs based on them.

  • Open Access

    OPTIMAL DESIGN OF FORCED FREQUENCY OF OSCILATIONS OF A SHELL OF MINIMAL SURFACE WITH RECTANGULAR PLAN CONSISTING OF TWO STRAIGHT LINES AND TWO SEMI-CIRCLES UNDER THERMAL LOADING

    by Grigory Ivanchenko, Oleksandr Kosheviy, Oxana Paliy, Inna Kosheva, Григорій Іванченко, Оксана Палій, Інна Кошева

    Optimal design of a structure is currently one of the most relevant sections in structural and applied mechanics. The theory of mathematical programming and the emergence of computers had a great influence on the optimal design of structures in the late 40s. This greatly expanded the range of structures and physical models that became available for optimal design. The use of analytical optimization methods leads to success only when considering the simplest structures. Therefore, numerical methods for finding optimal parameters, which are PC-oriented, have become widespread in optimal design. Designing is the most critical stage of creating a structure, during which technical characteristics are determined and the feasibility of the goal is checked. An integrated approach is required to take into account all requirements, and this is the main difficulty of optimal design. The process of creating an optimal structure is highly dependent on the optimization method, which plays a key role in the design of structures for various purposes. This scientific article considers an integrated approach to the optimal design of the forced frequencies of a shell of a minimal surface with a square plan consisting of two straight lines and two semicircles under thermal and power loading. The numerical study of the optimization calculation was carried out as follows: the objective function is the weight of the minimum surface shell, the design variables are the thickness of the minimum surface shell from 1 mm to 100 mm, and the constraint is represented as the first forced vibration frequency of 0.2 Hz. Based on the results of the numerical study, the weight of the minimum surface shell decreased by 11.2%, the first forced vibration frequency is 0.2 Hz, which meets the specified constraint. We can draw a general conclusion that the author's methodology and the use of his own software make it possible to perform an effective optimization calculation for shells of minimal surfaces, and the use of two types of optimization types on one research object is an important applied problem for civil and applied mechanics

  • Open Access

    STAGES OF THE DEVELOPMENT OF CONCRETE AND EXPERIENCE IN THE USE OF REINFORCED CONCRETE STRUCTURES

    by Galyna Getun, Iryna Bezklubenko, Victoria Kosheva, Inna Kosheva, Ірина Безклубенко, Інна Кошева

    This days the use of concrete and reinforced concrete structures in construction is common. Their widespread use has been made possibleby the achievements of engineers and architects ofpast centuries. The authors consider the main defining stages of development of concrete and reinforced concrete structures and their widespread popularization in the world. A consistent historicaloverview of the development of structural forms of reinforced concrete in residential and non-residential buildings was made. Numerous examples illustrate the path of development of reinforced concrete structures - from strut-beam systems to curvilinear spatial forms.The works of prominent civil engineers and architects are considered: F. Gennebique, M. Kenneth, O. Perre, R. Mayar, D. Mate Trucco, V. Bonade Bottino, R. Piano, E. Fressine, M. Berg, G. Trauer, E. Torroha, P. Luigi Nervi and others [2,13, 15].The article analyzes the development of architecture, building structures and construction technologies in the crucial phases of historical development based on the use of architectural research,which is based on the analysis of objective features of buildings and structures, namely their functional purpose and design capabilities. The experience of designing and construction of unique constructionswith large-span coverings, the search for rationalconstructive decisions are traced, recommendations for the further perspective development of reinforced concrete designs are given.

  • Open Access

    EXPERIENCE IN USE AND HISTORY OF DEVELOPMENT OF METAL STRUCTURES

    by Galina Getun, Victoria Kosheva, Inna Kosheva, Andrey Solomin, Інна Кошева, Андрій Соломін

    The widespread use of metal structures in construction became possible thanks to the work of architects and engineers of past centuries. The authors considered the main defining stages in the development of metal as a building material. A consistent historical review of the development of metal constructive forms in public buildings is presented. Numerous examples illustrate the path of development of metal structures - from post-and-beam systems to curvilinear spatial forms. The works of outstanding civil engineers and architects are considered: T. Pritchard, T. Payne, R. Burdon, T. Telford, V. Louis, A. Labrust, D. Paxton, C. Fox, G. Eiffel, I.V. Shwedler, D. Roebling and others. The development of architecture, building structures and construction technologies in decisive historical phases is analyzed. The method of architectural research was used, based on the analysis of objective features of buildings and structures, namely their functional purposes and design capabilities. The defining stages of the introduction and widespread use of metal structures in the practice of design and construction are investigated. The experience of designing and building unique structures with large-span coatings, rational design solutions is summarized, recommendations are given for the further promising development of metal structures.

  • Open Access

    Multicriterial parametric optimization in a pair of target functions: weight and movement of the shell minimum surface on the straight

    by O.O. Koshevyi, I.S. Kosheva

    The article considers the numerical study of multicriteria optimization of the minimum surface of a shell on rectangular contour taking into account the thermal load. The authors showed the theoretical formulation of multicriteria parametric optimization. Using of thermal force load is very important for objects that have a large span, especially using the static and temperature load in one place of a shell. This makes it possible to cover a wider range of construction site operation. In structural mechanics, there are three main types of standard shells of minimum surface: shape optimization, parametric optimization, and topological optimization. The article simultaneously combines two studies on the same object: shape optimization and parametric. The method of constructing this minimal surface on a rectangular contour is described. The specifics of the issuance of thermal power load in the optimization calculation, which is in all initial indicators and coefficients. The types of work of target functions are shown, namely: under what conditions they conflict, under what conditions they consolidate, under what conditions they are independent of each other. The numerical study uses the author's software, which allows in automatic mode a multicriteria optimization calculation with target functions - weight and Mises stress, design variables - thickness from 1 to 200 mm, presented as a Mises voltage of 240 MPa. The result showed that the target functions of the conflict change, but the weight decreases by 15%, and move along the coordination axes by 80% of the elements. After determining the displacements and stresses according to Mises, the process of designing and selecting the section of the structure for construction begins. The stage of design makes it possible to save material and redistribute it to the desired zones. From the graph of the change of objective functions according to the optimal height, what is the point for the objective functions - weight and move along the coordination axes is absence. The overall purpose of the study shows the possibility of using authoring software to use two types of optimization: optimization of shapes in the form of these minimum surface parameters on rectangular contour and multicriteria optimization together on the research subject, which is interesting and applied in structural mechanics.