Tales Gottlieb Jahn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tales Gottlieb Jahn has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Fernando Marcos de Oliveira
Itaipu Parquetec, Foz do Iguaçu 85867-900, PR, Brazil
4 shared publications - Daniel Augusto Cantane
Itaipu Parquetec, Foz do iguaçu, Brazil
3 shared publications - Filipe Tavares Carneiro
Itaipu Parquetec, Foz do Iguaçu 85867-900, PR, Brazil
3 shared publications - Leonardo Sostmeyer Mai
ISI Embarcados—SENAI, Florianópolis 88054-700, SC, Brazil
3 shared publications - Rogerio Luiz da Silva
Itaipu Parquetec, Foz do Iguaçu 85867-900, PR, Brazil
3 shared publications - Alexsandra Rospirski
Fundao Parque Tecnolgico Itaipu - Brasil,Foz do Iguau,Brasil
2 shared publications
Latest Publications
- Open Access
Hydrogen Production Plant Retrofit for Green H2: Experimental Validation of a High-Efficiency Retrofit of an Alkaline Hydrogen Plant Using an Isolated DC Microgrid
Given the climate change observed in the past few decades, sustainable development and the use of renewable energy sources are urgent. In this scenario, hydrogen production through electrolyzers is a promising renewable source and energy vector because of its ultralow greenhouse emissions and high energy content. Hydrogen can be used in a variety of applications, from transportation to electricity generation, contributing to the diversification of the energy matrix. In this context, this paper presents an autonomous isolated DC microgrid system for generating and storing electrical energy to be exclusively used for feeding an electrolyzer hydrogen production plant, which has been retrofitted for green hydrogen production. Experimental verification was performed at Itaipu Parquetec, which consists of an alkaline electrolysis unit directly integrated with a battery energy storage system and renewable sources (e.g., photovoltaic and wind) by using an isolated DC microgrid concept based on DC/DC and AC/DC converters. Experimental results revealed that the new electrolyzer DC microgrid increases the system’s overall efficiency in comparison to the legacy thyristor-based power supply system by 26%, and it autonomously controls the energy supply to the electrolyzer under optimized conditions with an extremely low output current ripple. Another advantage of the proposed DC microgrid is its ability to properly manage the startup and shutdown process of the electrolyzer plant under power generation outages. This paper is the result of activities carried out under the R&D project of ANEEL program No. PD-10381-0221/2021, entitled “Multiport DC-DC Converter and IoT System for Intelligent Energy Management”, which was conducted in partnership with CTG-Brazil.
Open AccessHydrogen Production Plant Retrofit for Green H2: Experimental Validation of a High-Efficiency Retrofit of an Alkaline Hydrogen Plant Using an Isolated DC Microgrid
Given the climate change observed in the past few decades, sustainable development and the use of renewable energy sources are urgent. In this scenario, hydrogen production through electrolyzers is a promising renewable source and energy vector because of its ultralow greenhouse emissions and high energy content. Hydrogen can be used in a variety of applications, from transportation to electricity generation, contributing to the diversification of the energy matrix. In this context, this paper presents an autonomous isolated DC microgrid system for generating and storing electrical energy to be exclusively used for feeding an electrolyzer hydrogen production plant, which has been retrofitted for green hydrogen production. Experimental verification was performed at Itaipu Parquetec, which consists of an alkaline electrolysis unit directly integrated with a battery energy storage system and renewable sources (e.g., photovoltaic and wind) by using an isolated DC microgrid concept based on DC/DC and AC/DC converters. Experimental results revealed that the new electrolyzer DC microgrid increases the system’s overall efficiency in comparison to the legacy thyristor-based power supply system by 26%, and it autonomously controls the energy supply to the electrolyzer under optimized conditions with an extremely low output current ripple. Another advantage of the proposed DC microgrid is its ability to properly manage the startup and shutdown process of the electrolyzer plant under power generation outages. This paper is the result of activities carried out under the R&D project of ANEEL program No. PD-10381-0221/2021, entitled “Multiport DC-DC Converter and IoT System for Intelligent Energy Management”, which was conducted in partnership with CTG-Brazil.
- Open Access
- 25 June 2025
- Published by MDPI AG in Preprints.org
Hydrogen Production Plant Retrofit Towards Green H2: an Isolated Microgrid Highly Integrated with Battery Storage, Wind and Solar Sources
Given the climate change being observed in the past few decades, sustainable development and the use of renewable energy sources are urgent. In this scenario, hydrogen production through electrolyzers is a promising renewable source and energy vector because of its ultralow greenhouse emissions and high energy content. Hydrogen can be used in a variety of applications, from transportation to electricity generation, contributing to the diversification of the energy matrix. In this context, this paper presents an autonomous isolated microgrid system for generating and storing electrical energy, to be exclusively used for feeding an electrolyzer hydrogen production plant, which has been retrofitted toward green hydrogen production. The experimental verification was performed at Itaipu Parquetec, which consists of an alkaline electrolysis unit directly integrated with a battery energy storage system and renewable sources (e.g., photovoltaic and wind) by using an isolated DC microgrid concept based on DC-DC and AC-DC converters. Experimental results revealed that the new electrolyzer DC-DC converter increases the system’s overall efficiency in comparison to the legacy thyristor-based power supply system, and autonomously control the energy supply to the electrolyzer under optimized conditions with extremely low output current ripple. Another advantage of the proposed DC microgrid is its ability to proper manage the startup and shutdown process of the electrolyzer plant under generation outages. This paper is the result of activities carried out under the R&D project of the ANEEL program No. PD-10381-0221/2021, entitled Multiport DC-DC Converter and IoT System for Intelligent Energy Management, which was conducted in partnership with CTG-Brasil.
- 25 June 2025
- Published by MDPI AG in Preprints.org
Open AccessHydrogen Production Plant Retrofit Towards Green H2: an Isolated Microgrid Highly Integrated with Battery Storage, Wind and Solar Sources
Given the climate change being observed in the past few decades, sustainable development and the use of renewable energy sources are urgent. In this scenario, hydrogen production through electrolyzers is a promising renewable source and energy vector because of its ultralow greenhouse emissions and high energy content. Hydrogen can be used in a variety of applications, from transportation to electricity generation, contributing to the diversification of the energy matrix. In this context, this paper presents an autonomous isolated microgrid system for generating and storing electrical energy, to be exclusively used for feeding an electrolyzer hydrogen production plant, which has been retrofitted toward green hydrogen production. The experimental verification was performed at Itaipu Parquetec, which consists of an alkaline electrolysis unit directly integrated with a battery energy storage system and renewable sources (e.g., photovoltaic and wind) by using an isolated DC microgrid concept based on DC-DC and AC-DC converters. Experimental results revealed that the new electrolyzer DC-DC converter increases the system’s overall efficiency in comparison to the legacy thyristor-based power supply system, and autonomously control the energy supply to the electrolyzer under optimized conditions with extremely low output current ripple. Another advantage of the proposed DC microgrid is its ability to proper manage the startup and shutdown process of the electrolyzer plant under generation outages. This paper is the result of activities carried out under the R&D project of the ANEEL program No. PD-10381-0221/2021, entitled Multiport DC-DC Converter and IoT System for Intelligent Energy Management, which was conducted in partnership with CTG-Brasil.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 67, e24240337
Intelligent Monitoring and Diagnosis System of Power Transformers applied Microservice Architecture
This work presents a customized and configurable solution for the online monitoring and diagnosis of power transformers that is already installed in the field and provides the main diagnostics of the asset, such as, aging acceleration factor, hotspot, apparent power, gas generation rate in the oil, temperature for the formation of free water in the oil, for blistering and hot spot formation, water content in the paper. The focus of this article is to describe the embedded system, which covers the hardware part, the information from the sensors installed for asset monitoring and communication with the server, as well as the development of the Web application of the monitoring system, based on the microservices architecture. The solution consists of the analog signal acquisition modules, RS-485 communication module, and digital inputs and outputs module, controlled by the NI central processing unit, CompactRIO through the NI LabVIEW development environment. The embedded system program is based on the MQTT protocol and the "Actor Framework" architecture, where "actors" responsible for the operations within the implemented logic are defined. The access or sending of information is done through messages between the actors, one of whom is responsible for managing the exchange of data between the others. The main focus of this structure is to receive the information from the sensors and link it to a "topic", where the algorithm allows directing this information to the registered senders. This work is part of the ANEEL R&D project to Campolarguense Energy Company - COCEL.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 67, e24240337
Open AccessIntelligent Monitoring and Diagnosis System of Power Transformers applied Microservice Architecture
This work presents a customized and configurable solution for the online monitoring and diagnosis of power transformers that is already installed in the field and provides the main diagnostics of the asset, such as, aging acceleration factor, hotspot, apparent power, gas generation rate in the oil, temperature for the formation of free water in the oil, for blistering and hot spot formation, water content in the paper. The focus of this article is to describe the embedded system, which covers the hardware part, the information from the sensors installed for asset monitoring and communication with the server, as well as the development of the Web application of the monitoring system, based on the microservices architecture. The solution consists of the analog signal acquisition modules, RS-485 communication module, and digital inputs and outputs module, controlled by the NI central processing unit, CompactRIO through the NI LabVIEW development environment. The embedded system program is based on the MQTT protocol and the "Actor Framework" architecture, where "actors" responsible for the operations within the implemented logic are defined. The access or sending of information is done through messages between the actors, one of whom is responsible for managing the exchange of data between the others. The main focus of this structure is to receive the information from the sensors and link it to a "topic", where the algorithm allows directing this information to the registered senders. This work is part of the ANEEL R&D project to Campolarguense Energy Company - COCEL.
- Open Access
Multi-Objective PSO for Control-Loop Tuning of DFIG Wind Turbines with Chopper Protection and Reactive-Current Injection
The control systems for the variable-speed wind turbine based on the Doubly Fed Induction Generator (DFIG) pose some tuning challenges. The performance and stability of DFIG wind turbines during faults in power grids are directly related to their controller settings. This work investigates how incorporating protection via a braking-Chopper controller connected to the DC link (DC Chopper) and a reactive-current injection during the PI-tuning process affects the performance of DFIG wind turbines during electrical faults. For the tuning process, the Multi-Objective-Particle-Swarm-Optimization (MOPSO) algorithm was used. Thus, two different approaches adopting this methodology were investigated, considering sequential and simultaneous tuning. The results showed that sequential tuning presented a better performance in relation to the reactive-current injection and lower amplitude deviations of the electrical quantities during and after the fault. On the other hand, simultaneous tuning reached damping of the mechanical oscillations faster and presented better performance of the protection system.
Open AccessMulti-Objective PSO for Control-Loop Tuning of DFIG Wind Turbines with Chopper Protection and Reactive-Current Injection
The control systems for the variable-speed wind turbine based on the Doubly Fed Induction Generator (DFIG) pose some tuning challenges. The performance and stability of DFIG wind turbines during faults in power grids are directly related to their controller settings. This work investigates how incorporating protection via a braking-Chopper controller connected to the DC link (DC Chopper) and a reactive-current injection during the PI-tuning process affects the performance of DFIG wind turbines during electrical faults. For the tuning process, the Multi-Objective-Particle-Swarm-Optimization (MOPSO) algorithm was used. Thus, two different approaches adopting this methodology were investigated, considering sequential and simultaneous tuning. The results showed that sequential tuning presented a better performance in relation to the reactive-current injection and lower amplitude deviations of the electrical quantities during and after the fault. On the other hand, simultaneous tuning reached damping of the mechanical oscillations faster and presented better performance of the protection system.
- 26 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Enhanced Three-Phase Interleaving Phase-Shifted Full Bridge Converter with Active Clamp Using GaNFET for Green Hydrogen Production
This article presents the development of a Three-Phase Interleaving Phase-Shifted Full Bridge (PSFB) DC-DC converter for green hydrogen generation. The converter implements Zero Voltage Switching (ZVS) and GaNFETs in the primary side of the transformer, and incorporates an Active Clamp system with synchronous rectification in the secondary side. These features are designed to minimize switching losses and significantly improve the power conversion efficiency. Simulation results confirm the effectiveness of these design choices, showcasing improved waveforms and stable operation. This work contributes to the advancement of power electronics in the field of green hydrogen production, offering a promising solution to increase efficiency and enhance the overall power quality of hydrogen generation processes.
- 26 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Enhanced Three-Phase Interleaving Phase-Shifted Full Bridge Converter with Active Clamp Using GaNFET for Green Hydrogen Production
This article presents the development of a Three-Phase Interleaving Phase-Shifted Full Bridge (PSFB) DC-DC converter for green hydrogen generation. The converter implements Zero Voltage Switching (ZVS) and GaNFETs in the primary side of the transformer, and incorporates an Active Clamp system with synchronous rectification in the secondary side. These features are designed to minimize switching losses and significantly improve the power conversion efficiency. Simulation results confirm the effectiveness of these design choices, showcasing improved waveforms and stable operation. This work contributes to the advancement of power electronics in the field of green hydrogen production, offering a promising solution to increase efficiency and enhance the overall power quality of hydrogen generation processes.
- Open Access
FBM-CSoC Control and Management System for Multi-Port Converter Applied in Hybrid Energy Storage System Used in Microgrid
Several management and control techniques for hybrid energy storage systems (HESS) with batteries and supercapacitors are presented in the literature applied to microgrids (MGs). The filter-based control strategy for defining the control loop actuation is one of the most widely used approaches with satisfactory performance. Variations of the Filter-Based Method (FBM) method are proposed to improve the control efficiency of the HESS under load disturbance and intermittent generator sources. However, not enough attention has been paid to the impacts of MG on the operational performance of batteries, despite the fact that they represent a non-negligible percentage of the total cost of MGs. In this paper, a control strategy called FBM-CSoC is proposed that focuses primarily on mitigating battery safety and degradation issues. The control strategy proposes a distribution of the charging and discharging current in a weighted proportional way to the normalized rated capacity and current state of charge (SoC) of each battery in the MG. This control strategy favors both the reduction of the internal temperature variation of the cells and the possibility of them operating in overcharging or over-discharging conditions. A comparative case study between the traditional FBM method and the FBM-CSoC, by means of numerical simulations, demonstrated that the load distribution occurs satisfactorily in energy storage systems. Finally, the FBM-CSoC method can be flexibly used for different types of battery technology and/or batteries with different SoCs integrated with supercapacitors.
Open AccessFBM-CSoC Control and Management System for Multi-Port Converter Applied in Hybrid Energy Storage System Used in Microgrid
Several management and control techniques for hybrid energy storage systems (HESS) with batteries and supercapacitors are presented in the literature applied to microgrids (MGs). The filter-based control strategy for defining the control loop actuation is one of the most widely used approaches with satisfactory performance. Variations of the Filter-Based Method (FBM) method are proposed to improve the control efficiency of the HESS under load disturbance and intermittent generator sources. However, not enough attention has been paid to the impacts of MG on the operational performance of batteries, despite the fact that they represent a non-negligible percentage of the total cost of MGs. In this paper, a control strategy called FBM-CSoC is proposed that focuses primarily on mitigating battery safety and degradation issues. The control strategy proposes a distribution of the charging and discharging current in a weighted proportional way to the normalized rated capacity and current state of charge (SoC) of each battery in the MG. This control strategy favors both the reduction of the internal temperature variation of the cells and the possibility of them operating in overcharging or over-discharging conditions. A comparative case study between the traditional FBM method and the FBM-CSoC, by means of numerical simulations, demonstrated that the load distribution occurs satisfactorily in energy storage systems. Finally, the FBM-CSoC method can be flexibly used for different types of battery technology and/or batteries with different SoCs integrated with supercapacitors.