JLJinyang Liu

Jinyang Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinyang Liu has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • EFFECT OF LASER SURFACE REMELTING OF 304 STAINLESS STEEL

    by Yu. Chen, X. Li, J. Liu, Y. Zhang, X. Chen

    To study the effect of laser surface remelting (LSR) on the organization and properties of a 304 stainless steel surface layer, the microscopic morphology, hardness, roughness, adhesion, and corrosion resistance of the remelted layer (RL) are examined by changing the laser scanning speed (LSS). The experimental results show that the LSR technique hardens the 304 stainless steel substrate surface with a substrate hardness of 185 HV, and the maximum hardness after remelting is 248.9 HV. With an increase in the LSS, the surface roughness gradually decreases, while the bonding force first increases and then decreases, with the maximum bonding force being 26.1 N. At the LSS of 20 mm/s, the phase distribution in the RL is more uniform. The maximum self-corrosion potential of the RL reaches −0.718 V, and the self-corrosion current density is 3.872 A/cm2. The surface properties of 304 stainless steel are improved by using LSR.


  • Open Access

    Effects of Machining Parameters on Electrochemical Multi-Field Coupling

    by Yuanlong Chen, Xiang Li, Yichi Zhang, Jinyang Liu

    Electrochemical machining involves three couplings between electric field, flow field and thermal field. The precipitation of hydrogen on the surface of the cathode will affect the entire electrochemical machining process and the final machining quality of the workpiece. Finite element software is used to analyze the effects of different voltages, electrolyte inlet pressure and interelectrode gap on current density, hydrogen volume fraction, conductivity and temperature distribution in this article. The research results show that the increase of processing voltage will increase the current density, hydrogen volume fraction and temperature, and decrease the conductivity of the solution. As the pressure of the electrolyte increases, the current density and conductivity increase, but the hydrogen volume fraction and temperature decrease. The current density, hydrogen volume fraction and temperature decrease, and the conductivity increases when the gap between electrodes increases. At the inlet, the current density and conductivity are relatively large, and gradually decrease along the electrolyte flow direction, while the hydrogen volume fraction and temperature are the smallest at the inlet, and gradually accumulate along the electrolyte flow direction, and reach the maximum at the outlet. Through multi-physics coupling simulation, the current density, temperature, conductivity and bubble distribution in electrochemical machining can be predicted, which can provide a theoretical basis for actual electrochemical machining process parameter selection.


  • Open Access

    Effect of Scanning Speed on Properties of Laser Surface Remelted 304 Stainless Steel

    by Yuanlong Chen, Xiang Li, Jinyang Liu, Yichi Zhang, Xuehui Chen

    In order to study the microstructure and properties of stainless steel after laser surface remelting, based on the theory of laser surface remelting, a simulation model of nanosecond-pulsed laser surface remelted stainless steel was established to study the evolution law of the Marangoni force of the molten pool during laser surface remelting. A single-lane laser remelting experiment was performed to study the variation of the scanning speed on the remelting width, roughness, and layer microtopography. The “S” scanning path was used to remelt the stainless steel surface to investigate the bonding force between the remelted layer and the substrate, the hardness, microscopic morphology, and corrosion resistance. The results show that the viscosity of the liquid metal in the molten pool increases with the increase of the scanning speed. Larger liquid viscosity and smaller surface tension temperature gradients promote a weaker flow of liquid metal, which reduces the velocity of the liquid metal flow in the molten pool. With the increase of scanning speed, the remelting width gradually decreases, but the roughness gradually increases. When the element content of Cr increases, the element content of Fe and O decreases. The surface is covered with an oxide film, the main components of which are oxides of Cr and Fe, the remelted layer is greater than that of the substrate, and the corrosion resistance is improved. Laser surface remelting technology can improve the structure and properties of 304 stainless steel.