SLSangjun Lee

Sangjun Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sangjun Lee has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    2D/3D Perovskite Heterostructures for Highly Selective Room-Temperature Blue Spin-Polarized Light-Emitting Diodes

    by Gyumin Jang, S.J. Lee, Sunihl Ma, Jaehyun Son, Junwoo Lee, Chan Uk Lee, Jeongyoub Lee, Wooyong Jeong, Chang-Seop Jeong, Jeong Hyun Park, et al.

    Circularly polarized light can be utilized in numerous applications, including 3D displays and magnetic memory. In this study, pure-blue spin-polarized light-emitting diodes (spin-LEDs) were fabricated by depositing chirality-induced spin selectivity (CISS) layers—2D perovskites incorporating R/S-2-fluoromethylbenzylamine (R/S-2F-MBA) chiral cations—on top of Br/Cl mixed-halide 3D perovskite thin films. The chiroptical properties of these heterostructured perovskites were significantly improved, as reflected in an approximately six-fold increase in circular dichroism over a conventional iodide perovskite. Density functional theory calculations indicated that as the ionic radius of the halogen atom decreased relative to that of iodine, the hydrogen bonding between the ammonium groups of the chiral cations and the halide anions in the inorganic slabs became stronger; this facilitated a chirality transfer from the 2F-MBA to the inorganic slabs and amplified the structural distortion. Halogen–halogen interactions contributed further to this chirality transfer, improving the spin-polarizability of the CISS layer. The significantly enhanced CISS effect yielded pure-blue spin-LEDs with a circularly polarized electroluminescence dissymmetry factor exceeding 10%. Additionally, the highly polar R/S-2F-MBA chiral cations effectively passivated halide vacancies in the perovskite film, boosting luminescence as well as external quantum efficiency. As a preliminary proof of concept, the spin-LEDs were employed as vertical-type circularly polarized light photodetectors, enabling interactive optical wireless communication.

  • Open Access

    Effect of Al7Cu2Fe Particles on the Anisotropic Mechanical Properties and Formability of Al-Zn-Mg-Cu-Based Alloy Sheets

    by Jonggyu Jeon, Sangjun Lee, Jeheon Jeon, Maru Kang, Heon Kang

    The presence of Al7Cu2Fe particles, formed due to Fe impurities in Al-Zn-Mg-Cu alloys, significantly impacts mechanical properties and formability, which is crucial for the use of these alloys in the automotive and aerospace industries. In this study, we prepared Al-Zn-Mg-Cu-based alloy sheets with large (LF), small (SF), and no (NF) Al7Cu2Fe particles to explore their effects on recrystallization and mechanical behavior. These sheets were fabricated using controlled cooling rates and subsequent thermo-mechanical processing. Fine dispersion of Al7Cu2Fe particles in the SF sheet led to a substantial reduction in grain size (16.5 μm) and an increase in yield strength (168.6 MPa), albeit with lower ductility (24.6%). In contrast, the NF sheet exhibited a lower yield strength (141.5 MPa) but superior ductility (35.8%) due to the absence of Al7Cu2Fe particles, which prevented premature fracture. The SF sheet demonstrated lower anisotropy in ductility due to the uniform recrystallized grain orientations, while the LF and NF sheets exhibited significant anisotropy in yield strength. These findings indicate that optimizing Al7Cu2Fe particle dispersion is key to balancing the strength, ductility, and anisotropy in Al-Zn-Mg-Cu alloys.


  • Elucidating the dominant role of all-amorphous heterostructure on optimized built-in electric field with abundant active sites for advanced lithium–sulfur batteries

    by Sumin Kim, Jeongyoub Lee, Sangjun Lee, Jung Been Park, Changhoon Choi, Gyumin Jang, Young Sun Park, Hyungsoo Lee, Juwon Yun, Subin Moon, et al.


  • Open Access

    The Influence of As-Cast Grain Size on the Formation of Recrystallized Grains and the Related Mechanical Properties in Al–Zn–Mg–Cu-Based Alloy Sheets

    by Jonggyu Jeon, Sangjun Lee, Jeheon Jeon, Maru Kang, Heon Kang

    The influence of as-cast grain size on recrystallization and the related mechanical properties of Al–Zn–Mg–Cu-based alloys was investigated. Grain sizes ranging from 163 to 26 μm were achieved by adding Ti, Cr and Mn, and ZnO nano-particles, which acted as heterogeneous nucleation sites. A decrease in the as-cast grain size led to a corresponding reduction in the recrystallized grain size from 54 to 13 μm. Notably, as-cast grain sizes below 100 μm provided additional nucleation sites at grain boundaries, allowing for a reasonable prediction of recrystallized grain size. Finer grains also contributed to enhanced mechanical properties, with yield strength increasing as recrystallized grain size decreased without significant loss of elongation. Additional strengthening was observed due to η-precipitates at grain boundaries, further improving the properties of fine-grained sheets.


  • Open Access

    Natural and Artificial Aging Effects on the Deformation Behaviors of Al–Mg–Zn Alloy Sheets

    by Kwangmin Choi, Sangjun Lee, Donghyun Bae

    This study investigated the effects of aging profiles on the precipitate formation and the corresponding strengthening and deformation behaviors of Al–Mg–Zn alloys. The alloys subjected to natural aging (NA) demonstrated significantly enhanced ductility at equivalent stress levels compared to those subjected to artificial aging (AA). In AA-treated alloys, η′ and η-phases with incoherent interfaces were formed, while GP zones and solute clusters were dominantly exhibited in the NA-treated alloy with a coherent interface with the matrix. Due to the change in interface bonding, the dislocation movement and pinning behavior after deformation are varied depending on the aging conditions of Al–Mg–Zn alloy sheet. Thus, the elongation to fracture of the NA alloy sheet was improved compared to that of the AA alloy sheet because of the enhanced work-hardening capacity and the thin precipitate-free zone (PFZ). Deformation textures and dislocation densities varied between NA and AA treatments, as revealed by electron backscatter diffraction (EBSD) and kernel average misorientation (KAM) analysis. The interactions between the precipitates, dislocations, and the PFZ in the AA- and NA-treated alloys were analyzed via transmission electron microscopy (TEM). The insights gained from this research provide a valuable foundation for industrial applications, particularly in sectors demanding lightweight, high-strength materials, where optimizing the aging process can lead to significant performance improvement and cost savings.


  • Open Access

    Molecular Dynamics Study on Crack Propagation in Al Containing Mg–Si Clusters Formed during Natural Aging

    by Sangjun Lee, Heon Kang, Donghyun Bae

    The crack propagation behavior of Al containing Mg–Si clusters is investigated using molecular dynamics (MD) simulations to demonstrate the relationship between the natural aging time in Al–Si–Mg alloys and ductility. Experimental results show that the elongation at failure decreases with natural aging. There are few studies on the relationship between natural aging and ductility because of the difficult observation of Mg–Si clusters. To solve the difficulty, cracked Al containing Mg–Si clusters of varying sizes are assumed for the MD simulations. A larger Mg–Si cluster in Al results in earlier crack opening and dislocation emission. Moreover, as the Mg–Si cluster size increases, the stress near the crack tip becomes more concentrated. This causes rapid crack propagation, a similar effect to that of crack tip sharpening. As a result of long-term natural aging, the cracks expand rapidly. The influence of geometry is also investigated. Crack lengthening and thickness reduction negatively impact the fracture toughness, with the former having a larger impact than the latter. Although there are several discrepancies in the practical deformation conditions, the simulation results can help to more thoroughly understand natural aging in Al–Si–Mg alloys.


  • Open Access

    Effect of Geometrical Parameters of Microscale Particles on Particle-Stimulated Nucleation and Recrystallization Texture of Al-Si-Mg-Cu-Based Alloy Sheets

    by Jonggyu Jeon, Sangjun Lee, Joonseok Kyeong, Seeun Shin, Heon Kang

    The effects of the shapes (needle and round) and volume fractions (low and high) of microscale particles in Al-Si-Mg-Cu-based alloys on recrystallization behavior, texture evolution, mechanical properties, and formability are investigated. The recrystallized grain size decreases as the size and volume fraction of the particles decrease and increase, respectively, regardless of the particle shape. The investigated alloys with a relatively low volume fraction of 0.7 to 2.4 vol.% exhibit higher efficiency particle-stimulated nucleation (PSN) than alloys with a high volume fraction of 6.0 to 21.0 vol.%. This is because the interaction between the particles and dislocations cannot be greatly promoted when the volume fraction of the particles is large enough to form agglomerates. The sheets with round-shaped particles exhibit higher yield strength (YS) and elongation (EL) than sheets with needle-shaped particles. The improvement in YS is due to the combined effects of grain refinement and particle strengthening, and the EL is improved by reducing the probability of cracking at the tips of round-shaped particles. The sheets with round-shaped particles exhibit relatively higher average plastic strain ratio (r¯) and planar anisotropy (∆r) than the sheets with needle-shaped particles, owing to the development of Goss {110} or rotated-Goss {110} orientations.


  • Open Access

    Influence of the Composition and Vacancy Concentration on Cluster Decomposition Behavior in Al–Si–Mg Alloy: A Kinetic Monte Carlo Study

    by Sangjun Lee, Heon Kang, Jonggyu Jeon, Donghyun Bae

    The influence of cluster composition and the addition of vacancies on the decomposition behavior of clusters during artificial aging in Al–Si–Mg alloys were analyzed according to the kinetic Montel Carlo model. Clusters with a balanced composition (Mg/(Mg + Si) = 0.5) were the most difficult to decompose. In addition, the cluster decomposition was slower when more vacancies were added to the cluster. Among Si, Mg, and vacancies, vacancies most significantly affect decomposition. The clusters with Mg/(Mg + Si) ≤ 0.4 strongly trap vacancies, which can be classified as hardly decomposable vacancy-rich clusters. The clustering behavior during natural aging and the effect of pre-aging were analyzed using the Kinetic Monte Carlo model. Pre-aging slows down cluster formation due to the lowered vacancy concentration. In addition, the overall composition of the clusters changes to easily decomposable clusters after pre-aging. Thus, not only is the number of clusters reduced but also the clusters are more easily decomposable when pre-aging is performed.