Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xianyin Duan has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mitigating Heat Accumulation Induced by Scan-Vector Shortening in Laser Powder Bed Fusion of Sharp-Edged Inconel 718 via Geometry-Informed Active Energy Modulation

    by Quan Zhou, Xianyin Duan, Kun Wang, Shuaishuai Gao, Di Zhang, Siyuan Zhang

    Laser powder bed fusion (LPBF) enables the fabrication of geometrically complex metallic components, but sharp-edged features remain susceptible to localized heat accumulation because bidirectional meander scanning produces progressively shortened scanning vectors near acute apices. The resulting imbalance between repeated energy input and limited heat dissipation destabilizes melt-pool behavior and degrades surface integrity, densification and microstructural uniformity. In this study, a geometry-informed active energy modulation strategy was proposed for LPBF of Inconel 718 sharp-edged components. A dimensionless Power Reduction Factor (PRF) was formulated to couple laser power attenuation with scan-vector shortening. Coupled DEM–CFD simulations showed that power reduction in heat-accumulation-prone regions decreased peak temperature and suppressed excessive melt-pool expansion caused by adjacent-track thermal history. In situ coaxial photodiode monitoring revealed that apical heat accumulation intensified with i build height under insufficient power reduction, whereas increasing the PRF reduced the overheated zone. Among the tested conditions, PRF = 0.3 provided the most favorable balance between overheating and energy deficiency, minimizing apical surface roughness and maintaining a relatively uniform microhardness distribution above 290 HV0.1. Lower PRF values resulted in swelling and hardness degradation, while higher PRF values promoted track instability and lack-of-fusion defects. Microstructural characterization revealed a persistent intra-track hierarchy in a cellular dendritic scale, while location-dependent PDAS variations along the sharp-edged region were comparatively modest. The observed trends indicate that spatially graded power attenuation modifies local cellular-scale heterogeneity. These results demonstrate that PRF-based modulation provides a quantitative route for mitigating scan-vector-shortening-induced heat accumulation in sharp-edged geometries without additional cooling delays.

  • Open Access

    Research Progress on Microstructure, Mechanical Properties, and Strengthening Mechanisms of In Situ-Synthesized Ceramic-Reinforced Titanium Matrix Composite Coatings via Laser Cladding

    by Min Wen, Boqiang Jiang, Xianyin Duan, Dingding Xiang

    The laser cladding (LC) of titanium matrix composite coatings (TMCCs) on titanium components not only effectively enhances the wear resistance, fatigue resistance, corrosion resistance, and biocompatibility of titanium and its alloys, but also circumvents the incompatibility and low bonding strength issues associated with other metallic composite coatings. While the incorporation of ceramic particles is a critical strategy for improving the coating performance, the limited interfacial bonding strength between ceramic particles and the matrix has historically constrained its advancement. To further elevate its performance and meet the demands of components operating in harsh environments, researchers worldwide have employed LC to synthesize in situ hard ceramic reinforcements such as TiC, TiB, TiN, and others within TMCCs on titanium substrates. This approach successfully addresses the aforementioned challenges, achieving coatings that combine a high interfacial bonding strength with superior mechanical properties. This paper provides a comprehensive review of the processing techniques, phase composition, microstructure, and mechanical properties of in situ-synthesized ceramic-reinforced TMCCs via LC on titanium components, with a focused summary of their strengthening mechanisms. Furthermore, it critically discusses the challenges and future prospects for advancing this technology.


  • Open Access

    Improved Grain Boundary Reconstruction Method Based on Channel Attention Mechanism

    by Xianyin Duan, Yang Chen, Xianbao Duan, Zhijun Rong, Wunan Nie, Jinwei Gao

    The grain size of metal materials has a significant impact on their macroscopic properties. However, original metallographic images often suffer from issues such as substantial noise, missing grain boundaries, low contrast, and blurred edges. These challenges hinder the accurate extraction of complete grain boundaries, limiting the precision of grain size measurement and material performance prediction. Therefore, effectively reconstructing incomplete grain boundaries is particularly crucial. This paper proposes a grain boundary reconstruction and grain size measurement method based on an improved channel attention mechanism. A generative adversarial network (GAN) serves as the backbone, with a custom-designed channel attention module embedded in the generator. Combined with a global context attention mechanism, the method captures the global contextual information of the image, enhancing the network’s semantic understanding and reconstruction accuracy for regions with missing grain boundaries. During the image reconstruction process, the method effectively leverages long-range feature correlations within the image, significantly improving network performance. To address the Mode Collapse observed during experiments, the loss function is optimized using Focal Loss, balancing the ratio of positive and negative samples and improving network robustness. Compared with other attention modules, the improved channel attention module significantly enhances the performance of the generative network. Experimental results demonstrate that the generative network based on this module outperforms comparable modules in terms of MIoU (86.25%), Accuracy (95.06%), and Precision (86.54%). The grain boundary reconstruction method based on the improved channel attention mechanism not only effectively improves the accuracy of grain boundary reconstruction but also significantly enhances the generalization ability of the network. This provides reliable technical support for the characterization of the microstructure and the performance prediction of metal materials.


  • Open Access

    Relationship between energy efficiency and surface morphologies in micro-milling of SLM Inconel 718

    by Xianyin Duan, Fengxiao Su, Shuaishuai Gao, Kunpeng Zhu, Ben Deng, Yu Zhang


  • Open Access

    A Novel Training Path to Promote the Ability of Mechanical Engineering Graduates to Practice and Innovate Using New Information Technologies

    by Feng Xiang, Junjie Cao, Ying Zuo, Xianyin Duan, Liangxi Xie, Min Zhou

    In the context of the emerging era of smart manufacturing, the concept of sustainability is gaining substantial and widespread attention. Information technology has emerged as a potent tool for manufacturing companies, facilitating their transition toward greener practices and boosting operational efficiency. Additionally, the sustainable development of the industrial and information technology sectors not only presents promising prospects for future progress but is also intricately tied to the achievement of “dual carbon” objectives. Therefore, strategically integrating cutting-edge information technology into graduate education not only enhances the proficiency of postgraduates in the fields of information technology and manufacturing but also facilitates the achievement of green and sustainable development goals. To this end, this paper proposes a novel “Three-Level Advancement” talent development model aimed at cultivating a greater number of highly qualified talents oriented toward green and sustainable development. Built upon a one-semester graduate education framework, the model assesses the effectiveness of the “Three-Level Advancement” training approach. Subsequently, the efficacy of the new talent development model is validated through a class-based comparative analysis. Finally, based on the interview responses of the participants, both teachers and students unanimously affirmed the significant superiority of learning outcomes achieved through this pedagogical reform over traditional teaching methods. The results indicate that this new talent development model not only markedly enhances the quality of practical education but also contributes to the cultivation of sustainable talents in the field of information technology.


  • Open Access

    Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

    by Xianyin Duan, Tao Long, Kunpeng Zhu, Wei Li, Ying Hsi Jerry Fuh

    The formation mechanism of the pore defects and the surface ripples takes an crucial position in the quality control of laser powder bed fusion process. This paper developed the melt pool evolution in LPBF process, and revealed the effects of flow state and temperature field distribution of the melt pool with various process parameters, from which the formation mechanism of pore defects and surface ripples had been clarified by computational fluid dynamics methodology. The discrete element method was applied to reproduce the powder bed with a set of processing parameters. Then free surface of the melt pool was calculated employing the volume of fluid method. It was found that surface ripples of the melt pool and irregular pore defects in the lap joints appeared due to the lack of fusion at a laser energy density of 32 J/mm3 under the pre-set conditions. As the laser scanning speed dropped to 600 mm/s, keyholes generated inside the melt pool due to the recoil pressure. Similar phenomenon of pore defects and surface ripples were observed in the experiments. The measured and simulated average widths of the molten track showed good agreement with the relative errors of less than 6%, which verified the accuracy of simulated formation. Our work shed new light on quality control of LPBF fabricated parts for future.


  • Open Access

    Reform of the Training Program of Intelligent Manufacturing Engineering of Universities in the Steel Industry

    by Xianyin Duan, Kunpeng Zhu, Xingdong Wang, Min Zhou

    To meet the demand of talents in the rapid and sustainable development of the steel manufacturing industry and the needs of the local development of green and intelligent steel technology, this paper presented a reformed training program of intelligent manufacturing of universities for the steel industry. The training program explored the reform plan of talent training objectives, curriculum system, teaching mode, practical links, and operation mechanism of intelligent manufacturing engineering, and built a system with the goal of cultivating innovative ability covering green and intelligent concepts. A new mode of talent cultivation that covers the green and intelligent manufacturing concept and awareness, engineering knowledge, and innovation ability is built, to cultivate high-quality engineering talents who can adapt to the demand of green and intelligent development of steel and other industries. The innovative talent cultivation mode could reconstruct the steel intelligent manufacturing engineering education system and produce a demonstrative effect and good social benefits on the construction of intelligent manufacturing engineering specialty in the industry-featured colleges and universities.