Abdel-Hamid Mahamat Ali
Abdel-Hamid Mahamat Ali has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Felix Paune
Department of Computer Engineering, ENSET Douala, University of Douala, Douala P.O. Box 1872, Cameroon
2 shared publications - Luc Vivien Assiene Mouodo
Department of Electrical Engineering, Higher Normal School of Technical Education (ENSET), University of Douala, Douala P.O. Box 1872, Cameroon
2 shared publications - Petros J. Axaopoulos
Department of Mechanical Engineering, University of West Attica, Campus II, Thivon 250, 12 241 Aegaleo, Greece
2 shared publications - Aloys Martial Ekoe A. Akata
Environmental Energy Technologies Laboratory (EETL), University of Yaoundé I, Yaoundé, Cameroon
1 shared publication - Auguste Mackpayen
Department of Mechanical Engineering, University of Bangui, Bangui P.O. Box 1450, Central African Republic
1 shared publication - Basant Agrawal
Mechanical Engineering Department, Shri G. S. Institute of Technology and Science, Indore, M.P.-452003, India
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (17) , 8698
Hybrid Electro-Thermal and FNN Framework for Joint SoC, SoH Estimation and Lifetime Prediction of Lithium-Ion Batteries in Electric Vehicles
Improving the performance and lifespan of lithium-ion batteries is a key challenge for the development of electric vehicles. However, accurately estimating the state of charge (SoC), state of health (SoH), and life cycle remains complex due to the electrical, thermal, and aging phenomena associated with these energy storage systems. Against this backdrop, this study proposes a hybrid approach combining an electro-thermal model with a feedforward neural network (FNN) to improve the estimation of key lithium-ion battery performance indicators within a temperature range of 0 °C to 40 °C. The developed methodology was implemented in MATLAB/Simulink and applied to the analysis of the vehicle’s power profile, as well as the evolution of SoC, SoH, and battery life cycle. The results demonstrate an accuracy of 95.3% for state of charge (SoC) estimation, with a mean absolute error of 4.7%. For state of health (SoH) estimation, the accuracy is 95.8% accompanied by a mean absolute error of 4.2%. Lastly, for life cycle prediction, the accuracy is 92.5% with a mean absolute error of 7.5%. The performance results demonstrate the robustness of the proposed approach and its ability to replicate battery dynamic behavior under climatic conditions representative of the African context. This contribution opens up promising avenues for optimizing battery management systems and advancing the sustainable development of electric mobility.
- 1 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (17) , 8698
Open AccessHybrid Electro-Thermal and FNN Framework for Joint SoC, SoH Estimation and Lifetime Prediction of Lithium-Ion Batteries in Electric Vehicles
Improving the performance and lifespan of lithium-ion batteries is a key challenge for the development of electric vehicles. However, accurately estimating the state of charge (SoC), state of health (SoH), and life cycle remains complex due to the electrical, thermal, and aging phenomena associated with these energy storage systems. Against this backdrop, this study proposes a hybrid approach combining an electro-thermal model with a feedforward neural network (FNN) to improve the estimation of key lithium-ion battery performance indicators within a temperature range of 0 °C to 40 °C. The developed methodology was implemented in MATLAB/Simulink and applied to the analysis of the vehicle’s power profile, as well as the evolution of SoC, SoH, and battery life cycle. The results demonstrate an accuracy of 95.3% for state of charge (SoC) estimation, with a mean absolute error of 4.7%. For state of health (SoH) estimation, the accuracy is 95.8% accompanied by a mean absolute error of 4.2%. Lastly, for life cycle prediction, the accuracy is 92.5% with a mean absolute error of 7.5%. The performance results demonstrate the robustness of the proposed approach and its ability to replicate battery dynamic behavior under climatic conditions representative of the African context. This contribution opens up promising avenues for optimizing battery management systems and advancing the sustainable development of electric mobility.
- Open Access
- 12 August 2026
- Published by MDPI AG in Preprints.org
Hybrid Electro-Thermal and FNN Framework for Joint SoC, SoH Estimation and Lifetime Prediction of Lithium-Ion Batteries in Electric Vehicles
Improving the performance and lifespan of lithium-ion batteries is a key challenge for the development of electric vehicles. However, accurately estimating the state of charge (SoC), state of health (SoH), and lifecycle remains complex due to the electrical, thermal, and aging phenomena associated with these energy storage systems. Against this backdrop, this study proposes a hybrid approach combining an electro-thermal model with a feedforward neural network (FNN) to improve the estimation of key lithium-ion battery performance indicators within a temperature range of 0 °C et 40 °C. The developed methodology was implemented in MATLAB/Simulink and applied to the analysis of the vehicle's power profile, as well as the evolution of SoC, SoH, and battery lifecycle. The results demonstrate an accuracy of 95.3% for State of Charge (SoC) estimation, with a mean absolute error of 4.7%. For State of Health (SoH) estimation, the accuracy is 95.8% accompanied by a mean absolute error of 4.2%. Lastly, for lifecycle prediction, the accuracy is 92.5% with a mean absolute error of 7.5%. The performance results demonstrate the robustness of the proposed approach and its ability to replicate battery dynamic behavior under climatic conditions representative of the African context. This contribution opens up promising avenues for optimizing battery management systems and advancing the sustainable development of electric mobility.
- 12 August 2026
- Published by MDPI AG in Preprints.org
Open AccessHybrid Electro-Thermal and FNN Framework for Joint SoC, SoH Estimation and Lifetime Prediction of Lithium-Ion Batteries in Electric Vehicles
Improving the performance and lifespan of lithium-ion batteries is a key challenge for the development of electric vehicles. However, accurately estimating the state of charge (SoC), state of health (SoH), and lifecycle remains complex due to the electrical, thermal, and aging phenomena associated with these energy storage systems. Against this backdrop, this study proposes a hybrid approach combining an electro-thermal model with a feedforward neural network (FNN) to improve the estimation of key lithium-ion battery performance indicators within a temperature range of 0 °C et 40 °C. The developed methodology was implemented in MATLAB/Simulink and applied to the analysis of the vehicle's power profile, as well as the evolution of SoC, SoH, and battery lifecycle. The results demonstrate an accuracy of 95.3% for State of Charge (SoC) estimation, with a mean absolute error of 4.7%. For State of Health (SoH) estimation, the accuracy is 95.8% accompanied by a mean absolute error of 4.2%. Lastly, for lifecycle prediction, the accuracy is 92.5% with a mean absolute error of 7.5%. The performance results demonstrate the robustness of the proposed approach and its ability to replicate battery dynamic behavior under climatic conditions representative of the African context. This contribution opens up promising avenues for optimizing battery management systems and advancing the sustainable development of electric mobility.
- Open Access
- 23 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15591
Tilt Angle and Orientation Assessment of Photovoltaic Thermal (PVT) System for Sub-Saharan Tropical Regions: Case Study Douala, Cameroon
Photovoltaic systems when integrated into a building structure can satisfy the world’s energy requirements at a competitive cost by providing onsite electrical and thermal energies for domestic appliances. The energy yield of the photovoltaic system is affected by the intensity of the solar radiation, wind speed, tilt angle, orientation, geographical location, etc. This paper presents an optimisation model of the tilt angle and orientation of a photovoltaic thermal system. A methodology has been developed to optimize the tilted angle of the roof for higher exergy output taking into account the intensity of solar radiation, wind speed, geographical location, cost of cleaning dust, etc. For a system installed in the city of Douala, Cameroon, it is recommended that the PV should be inclined at an angle between 10° and 20° south-facing for economical output. The cost per unit of electricity between the tilt inclination angles from 0° to 20° with south orientation is USD 0.04 per kWh. The cost of electricity loss due to a 20° tilt inclination angle can be compensated with the labour cost and work required for cleaning the photovoltaic thermal (PVT) system of the horizontal roof. The system installed over an effective area of 8 m2 is capable of producing annual net exergy of 2195.81 kWh/year at an efficiency of 11.8%.
- 23 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15591
Open AccessTilt Angle and Orientation Assessment of Photovoltaic Thermal (PVT) System for Sub-Saharan Tropical Regions: Case Study Douala, Cameroon
Photovoltaic systems when integrated into a building structure can satisfy the world’s energy requirements at a competitive cost by providing onsite electrical and thermal energies for domestic appliances. The energy yield of the photovoltaic system is affected by the intensity of the solar radiation, wind speed, tilt angle, orientation, geographical location, etc. This paper presents an optimisation model of the tilt angle and orientation of a photovoltaic thermal system. A methodology has been developed to optimize the tilted angle of the roof for higher exergy output taking into account the intensity of solar radiation, wind speed, geographical location, cost of cleaning dust, etc. For a system installed in the city of Douala, Cameroon, it is recommended that the PV should be inclined at an angle between 10° and 20° south-facing for economical output. The cost per unit of electricity between the tilt inclination angles from 0° to 20° with south orientation is USD 0.04 per kWh. The cost of electricity loss due to a 20° tilt inclination angle can be compensated with the labour cost and work required for cleaning the photovoltaic thermal (PVT) system of the horizontal roof. The system installed over an effective area of 8 m2 is capable of producing annual net exergy of 2195.81 kWh/year at an efficiency of 11.8%.